USER MANUAL TEDNA Shotguns. Over & Under Side by Side Semi-Automatic

USER MANUAL TEDNA Shotguns Over & Under Side by Side Semi-Automatic

Zenith Firearms www.zenithfirearms.com Come shoot the quality. Zenith Firearms, an American importer of high quality fi.rearms.and.accessories,.is.a.proud.distributor.of. TEDNA.fi.rearms. WARNING Please.read.this.user.manual.carefully. before.using.the.fi.rearm. WARNING Do.not.use.this.fi.rearm.until.you.fully. understand.all.of.the.safety.instructions.and. handling.procedures. NOTE Should.you.require.further.information,.please. call a Zenith Firearms representative at.434.202.7790. 2

Come Shoot the Quality INDEX GENERAL WARNINGS...4 SAFETY RULES...5 MODELS...8 OVER & UNDER SHOTGUNS Assembly...9 Usage...10 Choke Tubes... 11 Maintenance...12 SIDE BY SIDE SHOTGUNS Assembly...13 Usage...14 Choke Tubes...15 Maintenance...16 SEMI-AUTOMATIC SHOTGUNS Assembly...17 Loading...19 Firing...19 Unloading...20 Choke Tubes...21 Maintenance...22 SHOTGUN DIAGRAMS Over & Under - Single Trigger - Auto Ejector...24 Over & Under - Double Trigger - Auto Ejector...25 Over & Under - Single Trigger...26 Over & Under - Double Trigger...27 Side by Side - Single Trigger...28 Side by Side - Double Trigger...29 Semi-Automatic - G125 (Gas Operated)...30 Semi-Automatic - K125 (Inertia)...31 PARTS Over & Under Shotguns...32 Side by Side Shotguns...33 Semi-Automatic Shotguns...34 WARRANTY CERTIFICATE...35 3

Zenith Firearms www.zenithfirearms.com GENERAL WARNINGS Read this user manual carefully before using the product. Do not use any firearm before reading the safety rules and maintenance instructions. Obey the laws in your country referring to firearms purchasing, carrying and use. All firearms are dangerous. Zenith Firearms and TEDNA are not responsible for any damage that results from the improper use of your firearm. ESSENTIAL FIREARM SAFETY GUIDELINES These firearm safety guidelines have been prepared by Zenith Firearms, based upon currently available information. They are provided to you as a courtesy and in the interest of furthering safety. These guidelines are not comprehensive, nor do they modify or replace rules, recommendations, standards, or regulations made by legal authorities or manufacturers. As a responsible firearms supplier, Zenith believes that no issue is more important than firearm safety. We urge you to learn and practice the following guidelines and to make them your habit when handling firearms. This will help ensure safe handling of your firearm(s) and help prevent accidents. We also encourage you to complete an approved firearms safety-training course. 4

Zenith Firearms Come Shoot www.zenithfirearms.com the Quality THE 3 CARDINAL FIREARMS SAFETY RULES 1. Always handle a firearm as if it is loaded Even if you determine that a firearm is unloaded, always, always, always handle it like it IS loaded. When you handle a firearm, the first thing you should do (with the firearm pointed in a safe direction), is open the action to identify whether the firearm is loaded. If you do not know how to open the action, do not handle the firearm. And remember, removing a magazine alone does not make a firearm unloaded, as there may be a round in the chamber. 2. Always keep your finger out of the trigger guard and off the trigger until you are ready to shoot your target Do not place your finger inside the trigger guard until you have placed a firearm s sights on your target and have decided to fire. The best place to rest your finger in the meantime is above the trigger guard along the frame. By waiting until you are aimed at your target, if the trigger were to be pressed, you will guarantee that a shot will travel safely in the direction of your intended target. 3. Always keep a firearm pointed in a safe direction, before and beyond your target It is important to identify your actual target, but it is just as important to know what lies past and before your target. A safe direction is any direction where an unintentional discharge or miss will not cause injury or damage. In determining a safe direction, remember that a round can ricochet off an object like a floor, water or wall, or go through walls, floors, ceilings, and windows. Whether in a house or outdoors, the safest direction is the muzzle angled down toward the floor. And never point at or cross the muzzle of a firearm (loaded or unloaded) at any part of any person s body the laser rule! 5

Zenith Firearms www.zenithfirearms.com Come Shoot the Quality ADDITIONAL FIREARMS AND AMMUNITION RULES ALWAYS KEEP CHILDREN AND OTHERS SAFE BY STORING FIREARMS SECURE AND AWAY FROM UNAUTHORIZED PERSONS You should always store firearms and ammunition out of the sight and reach of children and anyone else who is not an intended user or not physically or mentally capable of handling and using them properly and safely. Store firearms in a safe storage place ideally, one you can lock. CAREFULLY READ THE ENTIRE INSTRUCTION MANUAL THAT COMES WITH YOUR FIREARM You should only use a firearm if you fully understand how to safely operate it. All firearms come with an instruction manual created by the manufacturer. If the firearm does not come with an instruction manual, contact the manufacturer directly and request one. ALWAYS DETERMINE THAT THE FIREARM IS SAFE TO OPERATE Before shooting, make sure the firearm is in good working order, that the barrel is clear, and that the firearm is safe to operate. This is especially important when handling a firearm that has been stored or unused for a long period of time. ALWAYS USE CORRECT AMMUNITION Never use improper or incorrect ammunition. Only use ammunition that is recommended by the firearm manufacturer the caliber of your firearm. Most firearms have the caliber engraved or stamped on the barrel. Your ammunition should have the exact same caliber. If you use the incorrect ammunition, it can destroy a firearm and cause serious injury. Additionally, it voids your warranty. 6

Zenith Firearms Come Shoot www.zenithfirearms.com the Quality WHEN CLEANING A FIREARM, MAKE SURE IT IS NOT LOADED One of the most common statements following an accidental discharge is: I was cleaning the firearm and it went off! When you clean a firearm, make sure it is not loaded. You should keep the ammunition in another room until you have finished cleaning the firearm and are ready to reload. NEVER USE FIREARMS WHILE USING DRUGS OR ALCOHOL When you handle firearms, your judgment must NOT be impaired. You should NEVER handle firearms while under the influence of alcohol, illegal drugs or while using legal prescription medication that can make you tired or affect your senses, reflexes, or judgment. USE EYE AND EAR PROTECTION Always wear proper eye and ear protection while shooting firearms; ear protection will help prevent hearing loss from the extreme decibel level of gunfire, and eye protection will help prevent ejection gases, ricocheted objects, casings, or any foreign objects from damaging your eyes. Be smart, be safe. 7

Zenith Firearms www.zenithfirearms.com MODELS uover AND UNDER SHOTGUNS EXCELLENCE SE12T Over & Under With Ejector 12 Ga. Single Trigger - Side Plate EXCELLENCE SE20T Over & Under With Ejector 20 Ga. Single Trigger - Side Plate EXCELLENCE SE12C Over & Under With Ejector 12 Ga. Double Trigger - Side Plate EXCELLENCE SE20C Over & Under With Ejector 20 Ga. Double Trigger - Side Plate AVANTGARDE SE12T Over & Under With Ejector 12 Ga. Single Trigger - Raised Sides AVANTGARDE SE20T Over & Under With Ejector 20 Ga. Single Trigger - Raised Sides AVANTGARDE SE12C Over & Under With Ejector 12 Ga. Double Trigger - Raised Sides AVANTGARDE SE20C Over & Under With Ejector 20 Ga. Double Trigger - Raised Sides PRIME SE12T Over & Under With Ejector 12 Ga. Single Trigger - Standard PRIME SE20T Over & Under With Ejector 20 Ga. Single Trigger - Standard PRIME SE12C Over & Under With Ejector 12 Ga. Double Trigger - Standard PRIME SE20C Over & Under With Ejector 20 Ga. Double Trigger - Standard EXCELLENCE S12T Over & Under 12 Ga. Single Trigger - Side Plate EXCELLENCE S20T Over & Under 20 Ga. Single Trigger - Side Plate EXCELLENCE S12C Over & Under 12 Ga. Double Trigger - Side Plate EXCELLENCE S20C Over & Under 20 Ga. Double Trigger - Side Plate AVANTGARDE S12T Over & Under 12 Ga. Single Trigger - Raised Sides AVANTGARDE S20T Over & Under 20 Ga. Single Trigger - Raised Sides AVANTGARDE S12C Over & Under 12 Ga. Double Trigger - Raised Sides AVANTGARDE S20C Over & Under 20 Ga. Double Trigger - Raised Sides PRIME S12T Over & Under 12 Ga. Single Trigger - Standard PRIME S20T Over & Under 20 Ga. Single Trigger - Standard PRIME S12C Over & Under 12 Ga. Double Trigger - Standard PRIME S20C Over & Under 20 Ga. Double Trigger - Standard uside BY SIDE SHOTGUNS EXCELLENCE C12T Side By Side 12 Ga. Single Trigger - Side Plate EXCELLENCE C20T Side By Side 20 Ga. Single Trigger - Side Plate EXCELLENCE C12C Side By Side 12 Ga. Double Trigger - Side Plate EXCELLENCE C20C Side By Side 20 Ga. Double Trigger - Side Plate AVANTGARDE C12T Side By Side 12 Ga. Single Trigger - Raised Sides AVANTGARDE C20T Side By Side 20 Ga. Single Trigger - Raised Sides AVANTGARDE C12C Side By Side 12 Ga. Double Trigger - Raised Sides AVANTGARDE C20C Side By Side 20 Ga. Double Trigger - Raised Sides PRIME C12T Side By Side 12 Ga. Single Trigger - Standard PRIME C20T Side By Side 20 Ga. Single Trigger - Standard PRIME C12C Side By Side 12 Ga. Double Trigger - Standard PRIME C20C Side By Side 20 Ga. Double Trigger - Standard COACH (EXC) C12T Side By Side 12 Ga. Single Trigger - Side Plate COACH (EXC) C20T Side BY Side 20 Ga. Single Trigger - Side Plate usemi-automatic SHOTGUNS SEMI AUTO K125 Semi Automatic - Inertia System, 12 Ga. SEMI AUTO G125 Semi Automatic - Gas Operated System, 12 Ga. 8

Zenith Firearms OVER AND UNDER SHOTGUNS ASSEMBLY (Disassemble you shotgun by reversing these instructions.) STEP 1: Pull latch on the forearm that is mounted on the barrel. STEP 2: Detach the forearm from the barrel by lifting off. STEP 3: Push the top lever fully to the right. STEP 4: While keeping the top lever pushed to the right, install the barrel to the receiver at an approx 40 angle. Be sure the barrel is completely installed to the receiver, otherwise the shotgun will not close. STEP 5: Be sure that the ejectors are properly installed in the receiver. STEP 6: Lift the barrel upwards to close the shotgun, be sure the barrel and receiver are properly aligned and the top lever returns slightly to the right of center. It is normal that the top lever does not return exactly to the center, this allows for wear. STEP 7: Mount the forearm to the barrel. Be sure the opening latch of the forearm is completely closed. STEP 8: Put the safety on by moving the safety switch to the rear position. 9

Zenith Firearms OVER AND UNDER SHOTGUNS USAGE STEP 1: Open your shotgun by pushing the top lever to the right while pushing the barrel downward. STEP 2: MAKE SURE THE SAFETY IS ON! (Moved to rear, S exposed) Install suitable cartridges according to your shotgun s gauge and chamber length. STEP 3: Close your shotgun. WARNING: YOUR SHOTGUN IS NOW LOADED. Move the safety to the forward position and pull the trigger to fire. STEP 4: Barrel selection (single trigger models only). With the safety on, move the selector located inside the safety to the right to fire the bottom barrel first. After firing the bottom barrel, the top barrel will fire with another pull of the trigger. STEP 5: Barrel selection (single trigger models only). With safety on, move the selector located inside the safety to the left to fire the top barrel first. After firing the top barrel, the bottom barrel will fire with another pull of the trigger. STEP 6: After shooting, open the shotgun by pushing the top lever fully to the right. Fired cartridges will be lifted for easy removal or ejected if your gun is fitted with automatic ejectors. 10

OVER AND UNDER SHOTGUNS www.zenithfirearms.com CHOKE TUBES The choke construction is designated by a series of notches at the muzzle end of the choke tube. WARNING: Never check the choke designation, install choke tubes or remove choke tubes unless the gun is unloaded and the action is open. Choke Tubes: Best Usage Full - No steel shot Imp Mod - Steel shot OK Mod Imp Cyl - Slugs OK Cyl - Slugs OK STEP 1: Clean and lightly oil the choke threads in barrel. STEP 2: Clean and lightly oil choke tube. STEP 3: Carefully begin threading choke into shotgun and tighten until snug. Check choke occasionally to ensure it has remained tight after shooting. 11

Zenith Firearms OVER AND UNDER SHOTGUNS MAINTENANCE STEP 1: Apply cleaning lubricant to the barrel and connecting points and clean with a dry cloth. Next, apply a protective lubricant to the connecting points. STEP 2: Repeat the same process on the receiver and forend latch with a cleaning and protective lubricant. Clean the barrel bore by passing a swab or cleaning patch through it to remove residue. If necessary, use a cleaning rod with a bore brush soaked in bore cleaning solvent. Run a clean dry cloth through the bore to remove excess residue. Lightly oil the inside of the barrel with a clean patch coated with oil. Apply a light coat of lubricant (preferably grease) to the connecting points of the receiver, barrels and forearm. Do not apply excess oil, grease or solvent. Excess cleaning fluids attract dirt, which can interfere with the function of the shotgun. Clean and lightly oil the external surface of the gun to remove any traces of dirt, moisture and fingerprints. If you need further detailed maintenance, contact a professional gunsmith. 12

SIDE BY SIDE SHOTGUNS www.zenithfirearms.com ASSEMBLY (Disassemble you shotgun by reversing these instructions.) STEP 1: Pull latch on the forearm that is mounted on the barrel. STEP 2: Detach the forearm from the barrel by lifting off. STEP 3: Push the top lever fully to the right. STEP 4: While keeping the top lever pushed to the right, install the barrel to the receiver at an approx 40 angle. Be sure the barrel is completely installed to the receiver otherwise the shotgun will not close. STEP 5: Mount the forearm to the barrel. Make sure that the opening latch is completely closed. STEP 6: Put the safety on by moving the safety switch to the rear. NOTE: It is normal for the top lever to not be exactly in the center. This allows for wear. 13

Zenith Firearms SIDE BY SIDE SHOTGUNS USAGE STEP 1: Open your shotgun by pushing the top lever to the right while pushing the barrel downward. STEP 2: MAKE SURE THE SAFETY IS ON! (Moved to rear, S exposed) Install suitable cartridges according to your shotgun s gauge and chamber length. STEP 3: Barrel selection (single trigger models only). With safety on, move the selector located inside the safety to the left to fire the left barrel first. After firing the left barrel, the right barrel will fire with another pull of the trigger. STEP 4: Barrel selection (single trigger models only). With safety to the right, the right barrel will fire first. After firing the right barrel, the left barrel will fire with another pull of the trigger. STEP 5: After shooting, open the shotgun by pushing the top lever fully to the right. Fired cartridges will be lifted for easy removal. 14

SIDE BY SIDE SHOTGUNS www.zenithfirearms.com CHOKE TUBES The choke construction is designated by a series of notches at the muzzle end of the choke tube. WARNING: Never check the choke designation, install choke tubes or remove choke tubes unless the gun is unloaded and the action is open. Choke Tubes: Best Usage Full - No steel shot Imp Mod - Steel shot OK Mod Imp Cyl - Slugs OK Cyl - Slugs OK STEP 1: Clean and lightly oil the choke threads in barrel. STEP 2: Clean and lightly oil choke tubes. STEP 3: Carefully begin threading choke into shotgun and tighten until snug. Check choke occasionally to ensure it has remained tight after shooting. 15

Zenith Firearms SIDE BY SIDE SHOTGUNS MAINTENANCE STEP 1: Apply cleaning lubricant to the barrel and connecting points and clean with a dry cloth. Next, apply a protective lubricant to the connecting points. STEP 2: Repeat the same process on the receiver and forend latch with a cleaning and protective lubricant. Clean the barrel bore by passing a swab or cleaning patch through it to remove residue. If necessary, use a cleaning rod with a bore brush soaked in Apply grease as shown above. bore cleaning solvent. Run a clean dry cloth through the bore to remove excess residue. Lightly oil the inside of the barrel with a clean patch coated with oil. Apply a light coat of lubricant (preferably grease) to the connecting points of the receiver, barrels and forearm. Do not apply excess oil, grease or solvent. Excess cleaning fluids attract dirt, which can interfere with the function of the shotgun. Clean and lightly oil the external surface of the shotgun to remove any traces of dirt, moisture and fingerprints. If you need further detailed maintenance, contact a professional gunsmith. 16

SEMI-AUTOMATIC SHOTGUNS www.zenithfirearms.com ASSEMBLY (Disassemble you shotgun by reversing these instructions.) STEP 1: Remove the magazine cap in front of the forearm by turning it counter-clockwise. STEP 2: Dismantle the forend by pulling forward on the barrel end. STEP 3: (G125 model only) Unscrew the supporter nut off of the magazine tube. STEP 4: Slide the barrel lug over the magazine tube. STEP 5: While assembling the barrel, pull back the bolt handle approximately one inch to the rear, allowing for easier alignment of the barrel. Make sure the barrel sits completely into the receiver. STEP 6: (G125 model only) Tighten the supporter nut on the magazine tube. 17

Zenith Firearms SEMI-AUTOMATIC SHOTGUNS ASSEMBLY (continued) STEP 7: Assemble the forearm over the magazine tube and barrel. Make sure that the forearm is seated completely into the flange at the front of the receiver. Tighten the screw by turning clockwise. STEP 8: Pull the cocking lever/bolt handle rearward until the action locks open. STEP 9: Push the bolt release button on the right side of the receiver. The bolt will slide forward. WARNING: Be careful that your fingers are clear of the ejection port. Keep your hand below the port. STEP 10: Push the safety latch at the rear of the trigger guard fully to the right. Be sure that the red color is not seen. 18

SEMI-AUTOMATIC SHOTGUNS www.zenithfirearms.com LOADING STEP 1: With the metal part of the shell to the rear, insert shells into the magazine tube until they lock. Repeat the operation until you have loaded the desired amount of shells. Make sure to load only suitable cartridges according to your shotgun s caliber & chamber specifications. STEP 2: After filling the magazine, push the cartridge drop lever (small latch at the back of carrier) to allow the cartridge to drop into the carrier. The bolt will slide forward and chamber a round in step 3. STEP 3: Pull the bolt handle back until the bolt locks in the rearward position. Push the bolt release button. STEP 4: The bolt must be allowed to close forcefully to fully chamber the round. One cartridge from the magazine is now chambered. You can now place another cartridge into the magazine to replace the chambered round. FIRING Figure 1 Figure 2 Push the safety to the left when you are ready to fire. You will see the red color. Make sure your finger is not in contact with the trigger as you are taking the safety off. Now your shotgun is ready to fire. Figure 1: Semi-auto bolt handle shown in proper alignment for removal. Note the spacing of the bolt handle in front of the curved handle slot. Figure 2: Bolt handle the half-way out position. When you fire, your shotgun will automatically eject the fired cartridge and replace it with one from the magazine until the gun is empty. At this point, the bolt will remain locked open, indicating that all rounds have been fired. 19

Zenith Firearms SEMI-AUTOMATIC SHOTGUNS UNLOADING STEP 1: Pull the bolt handle to the rear to eject the round from the chamber. STEP 2: The bolt will return to the closed position. STEP 3: Hold the carrier down and depress the feed latch. STEP 4: A cartridge will drop down to your finger on the carrier. Take out the cartridge. Repeat this process until the magazine is empty. Depress the cartridge drop lever at the back of the carrier and pull the bolt handle rearward until the bolt locks open, demonstrating that the shot gun is completely unloaded. 20

SEMI-AUTOMATIC SHOTGUNS www.zenithfirearms.com CHOKE TUBES The choke construction is designated by a series of notches at the muzzle end of the choke tube. WARNING: Never check the choke designation, install choke tubes or remove choke tubes unless the gun is unloaded and the action is open. Choke Tubes: Best Usage Full - No steel shot Imp Mod - Steel shot OK Mod Imp Cyl - Slugs OK Cyl - Slugs OK REMOVING THE MAGAZINE PLUG Regardless of the capacity of the shotgun, the shotgun is delivered to you as (2+1). You can change the capacity of the shotgun by removing the restrictor plug from the inside of the magazine tube. (901 & 920 models) First, remove the magazine cap. Gently pry the magazine cap upward and remove. Finish by reinstalling the magazine plug. 21

Zenith Firearms SEMI-AUTOMATIC SHOTGUNS MAINTENANCE STEP 1: Unscrew the magazine cap. STEP 2: Remove the forearm by pushing it forward. STEP 3: (G125 model only) Unscrew the supporter nut off the front of the magazine tube. STEP 4: Dismantle the barrel by pulling forward and off the magazine tube. STEP 5: O-ring is located inside the barrel ring so it s not visible on the magazine tube. STEP 6: Slide the gas piston off the front the magazine tube. STEP 7: Push the latch under the trigger group (loading figure 2/ cartridge drop lever). Pull back the bolt handle. Clean the outer surface of the magazine tube with a soft cloth. 22

SEMI-AUTOMATIC SHOTGUNS www.zenithfirearms.com STEP 8: Clean the inside and the outside of the piston using the same method. STEP 9: Clean the gas ports on the inside of the barrel lug. Clean inside of the barrel lug. Clean the barrel bore by passing a swab or cleaning patch through it to remove any residue. If necessary, use a cleaning rod with a bore brush soaked in bore cleaning solvent. Run a clean dry cloth through the bore to remove excess residue. Lightly oil the inside of the barrel with a clean patch coated with oil. Do not apply excess oil, grease or solvent. Excess cleaning fluids attract dirt, which can interfere with the function of the firearm. Clean and lightly oil the external surface of the firearm to remove any traces of dirt, moisture and fingerprints. Push the bolt release button while holding the bolt handle and allow the bolt to close slowly. Do not allow the bolt to close under force, since this may cause damage to the receiver. If you need further detailed maintenance, contact a professional gunsmith. 23

OVER & UNDER DIAGRAM - SINGLE TRIGGER - AUTO EJECTOR 61 8 62 9 1011 12 6 7 24 13 14 15 1617 18 19 2120 22 23 25 48 5 4 49 50 51 52 53 55 54 56 57 58 FOR EXCELLENCE MODELS ONLY 26 27 28 29 30 31 63 64 32 33 34 59 65 66 35 36 37 2 3 4 5 38 39 40 41 1 42 43 73 72 87 75 74 44 45 70 71 86 46 47 77 76 24 15

OVER & UNDER DIAGRAM - DOUBLE TRIGGER - AUTO EJECTOR 2 1 3 4 5 73 72 87 75 74 70 71 86 46 38 39 40 41 42 43 44 45 47 77 6 59 7 8 9 10 11 12 25 24 13 14 15 22 23 76 17 18 19 20 21 26 27 29 82 34 33 32 28 37 79 78 35 36 84 30 31 16 48 5 4 49 50 51 5253 55 54 56 57 58 FOR EXCELLENCE MODELS ONLY 16 25

OVER & UNDER DIAGRAM - SINGLE TRIGGER 2 3 4 5 85 1 46 38 39 40 41 42 43 44 45 47 6 60 7 61 862 91011 12 24 13 14 15 16 17 18 192120 22 23 25 26 27 28 29 30 31 63 64 32 33 34 59 65 66 35 36 37 67 68 69 48 5 4 49 50 51 52 53 55 54 56 57 58 FOR EXCELLENCE MODELS ONLY 26 17

OVER & UNDER DIAGRAM - DOUBLE TRIGGER 2 3 4 5 1 85 46 38 39 40 41 42 43 44 45 47 60 6 59 7 8 9 10 11 12 25 24 13 14 15 22 23 17 18 19 20 21 26 27 29 82 34 33 32 28 69 68 67 37 79 78 35 36 84 30 31 16 48 5 4 49 50 51 5253 55 54 56 57 58 FOR EXCELLENCE MODELS ONLY 18 27

SIDE BY SIDE DIAGRAM - SINGLE TRIGGER FOR EXCELLENCE MODELS ONLY 28 19

SIDE BY SIDE DIAGRAM - DOUBLE TRIGGER FOR EXCELLENCE MODELS ONLY 20 29

9 8 4 3 SEMI-AUTOMATIC DIAGRAM - G125 (GAS OPERATED) 18 20 19 23 22 21 78 39 84 85 67 66 68 60 64 61 65 69 73 70 16 15 14 13 11 10 12 54 55 53 56 58 37 38 57 52 51 50 36 59 17 42 40 41 48 49 62 63 71 72 25 24 46 47 45 44 43 26 35 30 29 74 92 93 22 23 27 88 7 5 28 31 32 33 79 89 34 6 2 7+1 MODELS ONLY 96 94 24 80 81 1 30 21

SEMI-AUTOMATIC DIAGRAM - K125 (INERTIA) 22 31

OVER & UNDER SHOTGUN - PARTS LIST P.No. PART NAME P.No. PART NAME 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 BARREL FRONT BEAD BARREL SWIVEL STUD SWIVEL SWIVEL SCREW RECEIVER TOP LEVER SAFETY SAFETY SPRING SAFETY SPRING PIN HAMMER SPRING PLATE HAMMER SPRING PLATE SCREW LOWER RECEIVER LOCKING BLOCK HOLDER LOCKING BLOCK HOLDER SPRING LOCKING BLOCK HOLDER PIN FIRING PIN PINTLE LOCKING BLOCK FIRING PIN SPRING FIRING PIN (TOP) FIRING PIN (BOTTOM) TOP LEVER SPRING PIN TOP LEVER SPRING TOP LEVER SPRING RETAINER TOP LEVER SPRING RETAINING PIN HAMMER SPRING PIN HOROZ YAYI / HAMMER SPRING SEAR PIN SEAR SPRING SEAR (RIGHT) SEAR (LEFT) HAMMER (RIGHT) HAMMER (LEFT) HAMMER PIN TRIGGER GUARD TRIGGER GUARD SCREW TRIGGER PIN FOREARM TAKE DOWN LATCH SCREW TAKE DOWN LATCH SPRING TAKE DOWN LATCH PIN TAKE DOWN LATCH TAKE DOWN LATCH BRACKET ESCUTCHEON COVER SCREW 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 FOREARM IRON ESCUTCHEON SCREW FOREARM COCKING ARM STOCK STOCK SWIVEL STUD STOCK BOLT WASHER STOCK BOLT BUTT PLATE BUTT PLATE SCREW SIDE PLATE (LEFT) SIDE PLATE SCREW SIDE PLATE (RIGHT) SIDE PLATE ESCUTCHEON COVER SCREW SIDE PLATE COVER SCREW TOP LEVER PIN COCKING ARM SAFETY LEVER SAFETY WASHER SELECTOR SELECTOR PIN TRIGGER SPRING TRIGGER ROLLER ROLLER SPRING ROLLER PIN WEDGE (RIGHT) WEDGE (LEFT) EJECTOR SEAR PIN EJECTOR SEAR SPRING EJECTOR (RIGHT) EJECTOR (LEFT) COCKING ARM (RIGHT) COCKING ARM (LEFT) TRIGGER (RIGHT) TRIGGER (LEFT) DAGGER DAGGER SCREW SEAR LEVER SAFETY PIN SEAR LEVER PIN EXTRACTOR EJECTOR SPRING PIN EJECTOR SPRING 32

SIDE BY SIDE SHOTGUN - PARTS LIST P.No. PART NAME P.No. PART NAME 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 BARREL FRONT BEAD EXTRACTOR EXTRACTOR SCREW BARREL SWIVEL STUD SWIVEL BARREL SWIVEL STUD SCREW SWIVEL SCREW RECEIVER TOP LEVER TOP LEVER SPRING TOP LEVER SPRING RETAINING PIN LOCKING BLOCK SAFETY SAFETY SPRING PIN SAFETY SPRING HAMMER SPRING PLATE HAMMER SPRING PLATE SCREW LOWER RECEIVER COCKING ARM CARRIERS COCKING ARM LEVER FIRING PIN PINTLE FIRING PIN SPRING FIRING PIN (LEFT) FIRING PIN (RIGHT) TOP LEVER SPRING PLUNGER TOP LEVER SPRING RETAINER TOP LEVER LOCKING PIN COCKING ARM COCKING ARM SPRING HAMMER SPRING PIN HAMMER SPRING HAMMER PIN SEAR-SELECTOR SPRING SEAR (RIGHT) SEAR (LEFT) HAMMER (LEFT) HAMMER (RIGHT) TRIGGER PIN TRIGGER GUARD TRIGGER GUARD SCREW SEAR PIN FOREARM TAKE DOWN LATCH SCREW TAKE DOWN LATCH SPRING TAKE DOWN LATCH PIN TAKE DOWN LATCH TAKE DOWN LATCH BRACKET FOREARM IRON ESCUTCHEON SCREW 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 FOREARM COCKING ARM PIN FOREARM COCKING ARM STOCK STOCK SWIVEL STUD STOCK BOLT WASHER STOCK BOLT BUTT PLATE BUTT PLATE SCREW SIDE PLATE (LEFT) SIDE PLATE (RIGHT) SIDE PLATE SCREW SIDE PLATE ESCUTCHEON COVER SCREW SIDE PLATE COVER SCREW SELECTOR TRIGGER SAFETY PIN SEAR LEVER SEAR LEVER PIN TRIGGER (RIGHT) TRIGGER (LEFT) SAFETY LEVER TRIGGER SPRING SAFETY WASHER LOWER RECEIVER PIN SAFETY SPRING PIN CROWN TANG SCREW LOWER RECEIVER REAR SCREW SAFETY INTERIOR PIN SAFETY INTERIOR HAMMER (LEFT) HAMMER (RIGHT) HAMMER SCREW HAMMER SPRING (LEFT) HAMMER SPRING (RIGHT) HOLDER (LEFT) HOLDER (RIGHT) PLATE IMMOBILIZATION SCREW PUMP (LEFT) PUMP (RIGHT) HAMMER SPRING CONTRA SCREW SIDE LOCK (LEFT) SIDE LOCK (RIGHT) RESTRAINT SEAR SCREW RESTRAINT (LEFT) RESTRAINT (RIGHT) SEAR (LEFT) SEAR (RIGHT) SEAR-SELECTOR SPRING (LEFT) SEAR-SELECTOR SPRING (RIGHT) 33

SEMI-AUTOMATIC SHOTGUN - PARTS LIST P.No. PART NAME P.No. PART NAME 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 BARREL FRONT BEAD BEARING BOLT EJECTOR RUBBER GAS RING GAS PISTON WASHER GAS PISTON RECEIVER TRACER WEDGE BOLT RELEASE BOLT RELEASE PIN BOLT RELEASE SPRING BOLT RELEASE LATCH BOLT RELEASE LATCH PIN BOLT RELEASE LATCH SPRING TRIGGER GUARD PIN TRIGGER GUARD STOCK BUTT PLATE BUTT PLATE SCREW STOCK SWIVEL STUD SWIVEL SABİTLEME VİDASI / SWIVEL SCREW MAGAZINE TUBE FOREARM SUPPORT RING FOREARM PLATE RING MAGAZINE FOLLOWER MAGAZINE SPRING MAGAZINE PLUG FOREARM MAGAZINE CAP SPRING MAGAZINE CAP PIN MAGAZINE CAP SCREW ACTION BAR ACTION SPRING SAFETY SAFETY PLUNGER SAFETY SPRING SAFETY SPRING PLUNGER CARRIER SPRING CARRIER PLUNGER CARRIER RETAINING PIN CARRIER TRIGGER ASSEMBLY PIN SLEEVE TRIGGER ASSEMBLY PIN RETAINER CARRIER DOG CARRIER DOG PIN CARRIER DOG SPRING CARRIER DOG PLUNGER HAMMER HAMMER PLUNGER 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 HAMMER SPRING SEAR SEAR SPRING SEAR PLUNGER SEAR PIN TRIGGER SPRING TRIGGER TRIGGER PIN BREECH BOLT EXTRACTOR SPRING EXTRACTOR SPRING PIN EXTRACTOR EXTRACTOR RETAINING PIN LOCKING BLOCK FIRING PIN SPRING FIRING PIN FIRING PIN RETAINER BOLT BLOCK BOLT LEVER BLOCK PIN BOLT LEVER BLOCK SPRING BOLT LEVER BLOCK SPRING PIN OPERATING HANDLE MAGAZINE CAP ACTION PIPE ACTION SUPPORTER ACTION SUPPORTER PIN STOCK BOLT MAGAZINE CAP SUPPORT 7+1 SWIVEL 7+1 MAGAZINE CAP SWIVEL HOLDER ACTION TUBE STOCK BOLT WASHER STOCK BOLT RECEIVER STOCK BOLT RING STOCK BOLT SCREW MAGAZINE SPRING RETAINER MAGAZINE PLUG RETAINER PLUG PLATE MAGAZINE CAP INTERIOR SWIVEL STUD RETAINER SWIVEL STUD SUPPORTER NUT BARREL MOVEMENT SPRING ACTION BAR SLEEVE BARREL SPRING RETAINING NUT LOCKING HEAD LOCKING HEAD PIN LOCKING HEAD SPRING MAGAZINE CAP SPRING RECOIL SPRING WEIGHT 34

Zenith Firearms Come Shoot the Quality Zenith Firearms Warranty At Zenith Firearms, we believe in the quality of our firearms, and we want you to as well. Age and wear cannot be covered under warranty, as the mechanical parts and materials that make up firearms eventually wear out. However, defective parts, materials, and workmanship are not acceptable, and we will stand behind our products. We warrant our firearms to be free from defects in performance and workmanship for.one.year.from.the.date.of. purchase..if.you.have.a.problem. that.is.directly.attributable.to.the. quality.of.our.product,.it s.on.us.to. make.it.right,.shipping.and.handling included. However, if you abuse, improperly maintain, or alter the internal workings of your Zenith firearm in any way, we will not warranty damage that occurs. Likewise, if you use improper or incompatible ammunition or parts, we will not warranty damage that occurs. This includes altering a serial number. If you have a problem with your firearm, please contact a customer service representative at 434-202-7790. RETURN WITHOUT REPAIR If we receive your firearm and determine that its damage is unwarrantable, we will contact you with an explanation and an estimation of your cost to have us repair or refurbish it. If you would rather we simply return your firearm to you, we will cover the cost of shipping to do so. FREE REPAIR AND RETURN If your firearm is defective and we determine the defect is warrantied, Zenith will try to repair it. If we repair your firearm, after doing so we will ship it directly back to you, provided you originally shipped it to us from your address. If your firearm cannot be repaired, we will consider replacing it. If we end up replacing your firearm, we will ship it back to you via a licensed FFL dealer, and there may be additional charges that you ll have to cover, such as transfer fees and background check fees. In either case, though, we will pay for shipping. LIMITATIONS ON WARRANTY OUR ONLY RESPONSIBILITY IN THE CASE OF BREACH OF WARRANTY IS REPAIR. ZENITH FIREARMS SHALL NOT BE LIABLE FOR ANY OTHER DAMAGES, INCLUDING DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES. Please Note: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state, as some jurisdictions do not allow limitations on certain damages and warranties. 35

Zenith Firearms 10950 Rockfish Valley Highway, Suite C, Afton, VA 22920 Tel: 434.202.7790 Fax: 800.466.4444 info@zenithfirearms.com www.zenithfirearms.com