Designer & manufacturer since 1987 THE BEST SOLUTIONS FOR OUTFITTING YOUR BOAT Discover a complete range of equipment for your boat : t ested and approved by offshore yacht racers i nnovative and versatile easy to use high Quality

STANDARD PRODUCTS Open Rope Bags The open rope bags have been developed to stow lines (halyards, sheets ) flaked and ready to run. Their installation is quick and easy. They can be removed when the boat is at the dock: -for a better protection against UVs -to facilitate cleaning and winter storage Outils Oceans rope bags have been developed in collaboration with racers and have been proven to be solid and long lasting. Ref T161906 T222508 T303110 T403110 Dimensions L16 x H19 x E6 cm L22 x H25 x E8 cm L30 x H31 x E10 cm L40 x H31 x E10 cm Closed Rope Bags Flash this code to see the video.. The closed rope bags have been developed to stow lines coiled. Once the line is coiled, pull the front of the rope bag to open, slide the coil inside. The rope bag closes automatically. No matter what the conditions are the line is always there. Pull, stow and let go. It s shut! All the Outils Ocean rope bags have our quick fixation system, which allows for easy installation and removal. Ref TS164020 TS252010 TS302515 TS304015 Dimensions L16 x H40 x E20 cm (Special mast base) L25 x H20 x E10 cm L30 x H25 x E15 cm L30 x H40 x E15 cm Winch handle Holders The Outils Oceans winch handle holders have one or two inclined cut-outs on the upper part to allow the winch handle to always be arranged against the boat. The winch handle holder with 2 cut-outs is universal, allowing the winch handle to be stored in all cases, to the left or to the right. The pair of winch handle holders, clockwise rotation (left) and anticlockwise rotation (right), permit you to choose the direction the winch handle will be stored, to the right or to the left, in respect to winch or a bulk head. Ref Dimensions RMW2 L10 x H35 x E07 cm Unit Both directions of rotation RMWRARH L10 x H35 x E07 cm Pair 1 clockwise + 1 anticlockwise rotation Flash this code to see the video..

Storage Lockers The Outils Oceans storage lockers, with either one or two compartments and clear windows, are easy to install. The new locker with 2 compartments is modular and can be fixed one to another either vertically or horizontally to create your own custom storage lockers. Everything is organized and easy to find: one side for little things (suntan lotion, sunglasses, keys ), one side for larger objects (water bottle, A4 documents ) Ref. Dimensions PP332508 L33 x H25 x E08 cm EQ5535,2C Small compartment L16 x H20 x E08 cm Large compartment L30 x H20 x E08 cm Bottle Holder Fenders Outils Oceans water bottle holder has been designed in collaboration with professional offshore sailors. Placed close to the helm or in the cockpit, you always have your bottle at hand. The bottle holder is adjusted to the form of a bottle and holds the bottle regardless of the heel of the boat. Light and durable, the materials have been selected to deal with humidity, salt water and UV. Ref. RMB Dimensions L10 x H25 x E10 cm Developed over 10 years for offshore racing boats, the flat fenders by Outils Oceans stay in place against the hull. They protect the paint and decorations on fragile hulls. Made of ultra-resistant materials designed to withstand tears, shocks,punctures, seawater, hydrocarbons, UV... They can even serve as a step or cushion... These fenders are the result of our experience,our design methods, our taste for innovation and our will to serve you with high quality products. QUALITY AT THE BEST PRICE! Ref. Dimensions PB244610 L24 x H46 x E10 cm PB405510 L40 x H50 x E10 cm 2 colors : white or navy blue

Stacking Bags The «Matos» is an exclusive Outils Oceans, designed in collaboration with the greatest skippers, for stacking gear. The best of a case and a bag, it is solid and structured to carry heavy equipment (anchor, tools, deck hardware, jerry cans...). Lightweight and foldable, it saves space by compressing to limit the volume used. The design and materials allow the bag to be loaded without limit, except of course that the user must carry! 2 half-flaps open with one hand for direct access to the content even in a small space. There is a clear pocket to list the contents in order to find everything easily. The small cords allow the bag to be compressed or carried in different ways. The optional interior bags allow for compartmentalizing. Ref. Dimensions Matos60 L60 x H28 x E28 cm PO282428 L28 x H24 x E28 cm Matos70 L70 x H32 x E32 cm PO382832 L38 x H28 x E32 cm Tool Bags 2 colors for the bags : red or navy blue 1 color for inside pockets : black Ref. COT211105 Dim L21 x H11 x E05 cm Ref. COT301606 Dim L30 x H16 x E06 cm Ref. CO1 Dim L38 x H15 x E15 cm Ref. CO10 Dim L45 x H15 x E15 cm Ref. CO2 Dim L45 x H24 x E26 cm Ref. CO5 Dim L45 x H28 x E26 cm Ref. CO3 Dim L35 x H20 x E10 cm Ref. CO8 Dimensions L37 x H21 x E10 cm Ref. SD324516,1C Backpack with 1 partition Dim L32 x H45 x E16 cm Options : Lateral pockets Additional partitions Ref. SD324516,1C,RL Backpack with trolley Dim L32 x H45 x E16 cm

MAGIC-MAT The mast ladder : the easiest way to go aloft by yourself The Magic Mast ladder is the easiest way to go aloft by yourself. The alternating steps and the «platform» at the top, renforced with polyethylene, provides comfort and safety. The Magic Mast ladder is available in length of 3,7 or 9 meters and comes in a large bag. It is designed to be extended (2,3 and 7 meters) and thus adapts to the height of your mast. You can do all the work on your mast, change lights, work on spreaders, set a weathervane, with the additionnal equipment : work harness and fall protection. TIPS FOR USING MAGIC-MAT Attach the mainsail, spinnaker or genoa halyard to the eye at the top of the mast ladder (the side where there are two steps facing). Hoist the halyard with the mast ladder. Remove the twists. Attach the eye at the bottom to the gooseneck or a fitting on the mast. Tension the halyard. To climb : hands around the mast, feet against the mast, push your body against your feet, once to the right and once to the left and so on. This requires a slight rotation of the body arround the mast. When the right foot pushes on the mast, you re on the right side of the mast, when the left foot pushes on the mast you re on the left side of the mast. At the masthead, wedge your feet in the steps, your back is supported by the harness, and both your hands are free to work. Your arms do not get tired as you re above your «work». Two complementary and essential accessories bring you the best security for working alone : the work harness and the fall protection. The fall protection is secured between a halyard and the harness : it limits your fall to 80 cm during your ascent and descent. This package allows you to sit in the harness as well as relax during your ascent and descent. Flash this code to see the video.. To choose the combination of mast ladder and extension necessary for your boat, you need the distance between the boom and the mast head (this distance corresponds to the «P») P= 30 m = 1 mast ladder of 9 m + 3 extensions of 7 m P= 17 m = 1 mast ladder of 7 m + 1 extension of 7 m +1 extension of 3 m P= 26 m = 1 mast ladder of 9 m + 2 extensions of 7 m + 1 extension of 3 m P= 16 m = 1 mast ladder of 9 m + 1 extension of 7 m P= 25 m = 1 mast ladder of 9 m + 2 extensions of 7 m + 1 extension of 2 m P= 15 m = 1 mast ladder of 9 m + 2 extensions of 3 m P= 24 m = 1 mast ladder of 9 m + 1 extension of 7 m + 2 extensions of 3 m + 1extension of 2 m P= 14 m = 1 mast ladder of 9 m + 1 extension of 3m + 1 extension 2 m P= 23 m = 1 mast ladder of 9 m + 2 extensions of 7 m P= 13 m = 1 mast ladder of 9 m + 2 extensions of 2 m P= 22 m = 1 mast ladder of 9 m + 1 extension of 7 m + 2 extensions of 3 m P= 12 m = 1 mast ladder of 9 m + 1 extension of 3 m P= 21 m = 1 mast ladder of 9 m + 1 extension of 7 m + 1 extension of 3 m + 1 extension of 2 m P= 11 m = 1 mast ladder of 9 m + 1 extension of 2 m P= 20 m = 1 mast ladder of 9 m + 1 extension of 7 m + 2 extensions of 2 m P= 10 m = 1 mast ladder of 7 m + 1 extension of 3 m P= 19 m = 1 mast ladder of 9 m + 1 extension of 7 m + 1 extension of 3 m P= 9 m = 1 mast ladder of 9 m P= 18 m = 1 mast ladder of 9 m + 1 extension of 7 m + 1 extension of 2 m P= 8 m = 1 mast ladder of 3 m + 1 extension of 3 m + 1 extension 2 m

MAGIC-REBOARD The emergency ladder : the easiest way to reboard by yourself The Magic-Reboard is a rescue reboarding Ladder, easy to install and easy to use. It has been besigned to reboard unaided in complete security. In conformity with the Norm EN/ISO 15085 and the European Directive 2013/53/EU, it adapts to all types and sizes of boats. The ladder is installed with the mounting bracket or a simple lashing. TIPS FOR USING MAGIC-REBOARD Simple to install and to remove for the winter, Magic-Reboard rescue ladder is installed on the stern rail by a lashing or, simpler yet, by the stainless steel mounting bracket sold separately. The mounting bracket allows for a simple and safe attachment of the rescue ladder to the rail. It also allows for quick removal for winter storage. The small line allows the ladder to be opened unaided from the water. The ladder unfolds automatically. The length of the ladder is adapted for most boats on the market today. The steps of the ladder have been specially designed to sink in the water. In order to easily reboard there should be 2 steps in the water. Reboarding is facilitated with wide steps to allow both feet on the steps at the same time and a reasonable distance between the steps to make climbing easier. Flash this code to see the video..

CUSTOM PRODUCTS Open Rope Bags Anchor Bags Interior Storage Deck HArdware Protections FENDERS Lee Cloths and Bunks STACKING BAGS Covers This is an overview of some of our creations. Don t see what you want? Contact us!

The best solutions for outfitting your boat e rgonomic Light (when empty) Easy to use S olid Deformable and unbreakable material Resistant to corrosion, UV and waterproof... e fficient and innovative Materials and designs have been tested racing Development of products that facilitate navigaton and life on board A professional approach 1 Identification and analysis of requirements in place. 2 Definition of specifications. 3 Study, prototype, product testing, finalization of product. 4 Manufacturing and after sales service. Our team is at your service! Managing Director : Tristan PODER : +33 (0)2 98 94 87 64 tristan.poder@outils-oceans.com Marine equipment Department Manager Sarah BARAL : +33 (0)2 98 94 87 62 sarah.baral@outils-oceans.com Outils Océans is a member of FIN, the marine industry french federation since 2007. Find the vidéo on our website in the menu «qui sommes-nous» «toutes nos vidéos» or flash the code OUTILS OCÉANS 10 rue Nicolas Appert, ZAC de Troyalac h - 29170 Saint-Évarzec - France Tél. : +33 (0)2 98 94 63 03 Fax : +33 (0)2 98 94 68 22 contact@outils-oceans.com