Safety Data Sheet Synthetic Engine Oil 0W-40

Similar documents
BOSS LUBRICANTS: MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Enerpac, A Division of Actuant N86 W12500 Westbrook Crossing Menomonee Falls, WI Phone: (262) Fax: (262)

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

BJ SERVICES COMPANY MATERIAL SAFETY DATA SHEET

Safety Data Sheet. Tuxton Select Full Synthetic 0W20 API SN/GF-5

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. BOSS 139 Hi-Temp Mortar. Section 1. Identification. Section 2. Hazards Identification. Synonyms Manufacturer Stock Numbers

1. Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET Artisan Intensive Stone Cleaner SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

The Valvoline Company Date Prepared: 01/14/02. MSDS No: I

SECTION 2 COMPOSITION / HAZARDOUS INGREDIENTS INFORMATION INGREDIENT WT % TLV / PEL* CAS # 9-OCTADECEN

GulfTEC Synthetic Motor Oil 0W-20

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Date Revised: 7/18/2013 Page: 1 Mold Release MSDS Number: SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Safety Data Sheet. Tuxton Synthetic Gear Oil 75W90

SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING. 129 Lockwood St CHEM-TEL (24 hour)

GLENIUM 3000 (FORMERLY: RHEOBUILD 3000FC; PS1140 ADMIXTURE)

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET Lead Stop

Material Safety Data Sheet

Material Safety Data Sheet

Safety Data Sheet. Tuxton Trust Dexron VI

Version /20/2006

MATERIAL SAFETY DATA SHEET C-MUL SUN DRILLING PRODUCTS CORP.

Material Safety Data Sheet

Version /28/2006

Material Safety Data Sheet

S A F E T Y D A T A S H E E T

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Weight percent. CAS No.

Thoroseal Waterproofing Paint

Gulf Compressor Synthetic DE Lubricant

Version /30/2006

Cen-Pe-Co Hy-Torque Gear Lube Red With Temp Tac Page 1 of 5 05/01/08 MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET. Section 2: Hazard Identification Classification of the chemical in accordance with paragraph (d) of :

Material Safety Data Sheet

Safety Data Sheet. 503 Main Street Belle Chasse, LA 70037

Material Safety Data Sheet. Product Name: SoftCIDE -NA Foam Revision Date: 03/27/08 Version: 1

Material Safety Data Sheet

Air Tool Lubricant MSDS. Air Tool Lubricant. (800) (Poison Control USA) 24 Hours (800) (CHEMTREC) 24 Hours. Not Applicable - Mixture

BT-701. Advanced Chemical Technology, Inc. SAFETY DATA SHEET Version 1.0 Effective Date: 06/01/15 1. PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

1. Chemical Product and Company Identification. 2. Hazardous Ingredients. 3. Hazards Identification

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. Section 2 Hazards Identification. Section 3 Composition/Information on Ingredients

SAFETY DATA SHEET Isopropyl Alcohol 70% Product Number: 32

SAFETY DATA SHEET. TRD Revision 01/30/ PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDOUS IDENTIFICATION

MATERIAL SAFETY DATA SHEET

Safety Data Sheet 1782SYM

Material Safety Data Sheet

The Valvoline Company Date Prepared: 01/14/02. MSDS No: I

Madison Chemical Co., Inc.

Material Safety Data Sheet MUELLER HINTON AGAR 500GM. Section 1 - Chemical Product and Company Identification

Material Safety Data Sheet. HMIS Rating: Health: 1 Flammability: 1 Physical Hazard: 0 1. PRODUCT AND COMPANY IDENTIFICATION DETOUR FOR RODENTS

SAFETY DATA SHEET. CALLOUS CUTTER Revision 01/30/ PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDOUS IDENTIFICATION

BACHARACH, INC. MATERIAL SAFETY DATA SHEET

Version /28/2006

Phone Emergency Phone Fax (270) (800) (270) CHEMTREC

Material Safety Data Sheet

The Valvoline Company Date Prepared: 01/14/02. MSDS No: I

Safety Data Sheet Tool Cool Blue Cutting Gel 5/6/2015

SAFETY DATA SHEET SECTION 1 PRODUCT AND COMPANY INFORMATION SECTION 2 COMPOSITION INFORMATION ON INGREDIENTS SECTION 3 HAZARDS IDENTIFICATION

MATERIAL SAFETY DATA SHEET

METACAULK 1000 Intumescent, water-based firestop sealant

Material Safety Data Sheet SANTOLUBES LLC SANTOTRAC, SANTOVAC, SANTOLUBES, AND SYNERGY P.O. Box 960 St. Charles, MO

AIR DETRAINER-1 Safety Data Sheet

Material Safety Data Sheet CoolingCare 8141

SAFETY DATA SHEET 1. PRODUCT AND COMPANY INFORMATION

Version /28/2006

1. Identification of the substance/mixture and of the company/undertaking

SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING. 129 Lockwood St CHEM-TEL (24 hour)

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. This SDS has been prepared for the purposes of Hazard Communication, under 29 CFR Hazards Identification

Ferris File-A-Wax Green

Madison Chemical Co., Inc.

MATERIAL SAFETY DATA SHEET

RSA-10 Safety Data Sheet

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON INGREDIENTS

SAFETY DATA SHEET CERAMIC GLAZE

Version /08/2003

Use only for the purpose on the product label.

: Red Caries Indicator

KAY INDOOR/OUTDOOR ABSORBENT. Use only for the purpose on the product label.

Safety Data Sheet. Trade Name: Boiler Water Treatment BOX 1202RC. Phone: website:

Safety Data Sheet 3% U.S.P HYDROGEN PEROXIDE

1. Product And Company Identification

MATERIAL SAFETY DATA SHEET

CWT-26. CWT /17/2016 Water Treatment Compound Alliance Group, Inc N114 W18621 Clinton Drive Germantown, WI 53022

SAFETY DATA SHEET PE68 OIL

MATERIAL SAFETY DATA SHEET FILE NO.: 378 NAME OF PRODUCT BIO-STAT MSDS DATE: 12 /18 /06

Transcription:

1 of 5 Safety Data Sheet Synthetic Engine Oil 0W-40 1. PRODUCT AND COMPANY IDENTIFICATION Product Name : Synthetic Engine Oil 0W-40 Supplier : ValPar PO Box 3856, Hwy #1 East Regina, SK S4P 3R8 CANADA Telephone : 877-685-4886 Product/MSDS Information : 306-791-5911 Canutec (24 hr) : 613-996-6666 2. COMPOSITION/INFORMATION ON INGREDIENTS OSHA Hazardous Components (29 CFR 1910.1200) 1-Decene, Momopolymer, Hydrogenated Base, CAS#Mixture Zinc And Zinc Compounds, CAS#Mixture See Section 8 For Exposure Limits* 3. HAZARDS IDENTIFICATION Potential Health Effects : Minor Eye, Inhalation And Skin Irritant. *See Section 11 For Toxicological Information* 4. FIRST AID MEASURES Eye : Flush with water for 15-20 minutes. Seek medical attention if irritation develops. Skin : Wash immediately with soap and water. Remove contaminated clothing and launder before reuse. Discard shoes and leather articles saturated with the product. Obtain medical advice if irritation occurs. Inhalation : Remove exposed person to fresh air. If breathing is labored give oxygen. If breathing has stopped apply artificial respiration. Get immediate medical attention. Ingestion : Do not induce vomiting. If conscious, give 2 glasses of water. If vomiting does occur, keep head below the hips to reduce risk of aspiration. Get immediate medical attention.

2 of 5 5. FIRE FIGHTING MEASURES Flammability Properties Flash Point : 224ºC Method : COC. ASTM D-92 LFL/UFL : Not Determined Auto-Ignition Temperature : Not Determined Extinguishing Media : Carbon Dioxide, dry chemical, and alcohol foam. Firefighting Equipment : Full bunker gear recommended including a positive pressure self-contained breathing apparatus. 6. ACCIDENTAL RELEASE MEASURES Isolate spill area. Provide adequate ventilation. Wear appropriate personal protection. Recover free product for recycle an /or disposal. Add sand, earth or other suitable absorbent to spill area. Prevent entry into sewers and waterways. Check under Transportation and Labelling (DOT/CERCLA) and Other Regulator Information Section (SARA) for hazardous substances to determine regulatory reporting requirements for spill. 7. HANDLING & STORAGE Handling : Keep containers closed. Avoid contact with eyes, skin or clothing. Wash hands after handling. Empty container may retain product residue which may exhibit hazards of product. Storage : Keep away from heat or flame. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Ventilation : Use adequate general or local exhaust ventilation to keep airborne concentrations below exposure limits. Respiratory : Use a NIOSH approved respirator when necessary. Skin : Use Viton or Nitrile gloves to avoid prolonged or repeated skin contact. Eye : Use splash goggles or face shield where splashing is expected or can occur Exposure Limits : The Threshold Limit Value (TLV) OF 5 mg/m3 is suggested for oil mist. 9. PHYSICAL AND CHEMICAL PROPERTIES Physical State : Liquid Vapor Density (Air=1) : Negligible Solubility in Water : Negligible Specific Gravity : 0.8660 Volatility (Volume) : Negligible ph : Essentially Neutral

3 of 5 Odor : Mild, Bland, Hydrocarbon Odor Appearance : Amber Transparent Colored Liquid Viscosity, cst @ 100ºC : 13.5 Viscosity, cst @ 40ºC : 65 Viscosity Index : 180 Refractive Index : 1.4664 Fire Point : 238ºC Pour point : -45ºC 4-Ball Para 1 : 0.38 4-Ball Para 3 : 0.55 10. STABILITY AND REACIVITY Stability : Stable under moderately elevated temperatures and pressures. Incompatibility : Avoid contact with strong oxidants. Hazardous Polymerization : Will not occur. Hazardous Decomposition of Product : Toxic oxides of carbon, aldehydes and other products of complete combustion. 11. TOXICOLOGICAL INFORMATION Acute Exposure Eye : Moderate to strong eye irritation. Based on data from components or similar material. Skin Irritation : Not expected to be a primary skin irritant. Based on data from components or similar material. Prolonged or repeated skin contact as from clothing wet with material may cause dermatitis. Symptoms may include redness, edema, drying, defatting, and cracking of the skin. Respiratory Irritation : If material is misted or if vapors are generated from heating, exposure may cause irritation of mucous membranes and the upper respiratory tract similar to that observed with mineral oil. Based on data from components or similar materials. Under good industrial hygiene practices where all exposure limits are observed, respiratory irritation should not be a problem Chronic Exposure Chronic Toxicity : No data available to indicate product present at greater than 1.0% are chronic health hazards. Carcinogenicity : No data available to indicate product present at greater than 0.1% are a carcinogenic hazard. Mutagenicity : No data available to indicate product present at greater than 1.0% present a mutagenic or genotoxic hazard. Reproductive Toxicity : No data available to indicate product present at greater than 1.0% present a reproductive hazard. Teratogenicity : No data available to indicate product present at greater than 1.0% present a teratogenic hazards.

4 of 5 Additional Information Exposure Limits : Under conditions which may generate mists, observe the OSHA PEL of 5 mg per cubic meter. 12. ECOLOGICAL INFORMATION No data available on the adverse effects of this product on the environment. 13. DISPOSAL CONSIDERATIONS If this product as supplied becomes a waste, it does not meet the criteria of a hazardous waste as defined under the Resource Conservation and Recovery Act (RCRA) 40 CFR 261. 14. TRANSPORT INFORMATION This product is not classified as hazardous material for DOT SHIPPING. For further information relative to spills resulting from transportation incidents, refer to the latest DOT Emergency Response Guidebook for Hazardous Materials. 15. REGULATORY INFORMATION U.S. Federal Regulations OSHA TABLE Z : Synthetic Base Stock (Mist) TSCA : Not Applicable CERCLA 40 CFR 302.4 : Zinc Compounds @ 1.30-2.58% RQ 1 lb SARA Title III Section 302 Extremely Hazardous : Not Applicable Section 311/312 : Fire Hazard: Yes Reactive Hazard: No Release of Pressure: No Acute Health Hazard: Yes Chronic Health Hazard: No Section 313 Toxic Chemical : Not Applicable U.S. State Regulations California (PROP 65) : Does not contain chemicals known to the state of California to cause cancer. International Regulations WHMIS : All components listed.

5 of 5 16. OTHER INFORMATION The information contained herein is based on data considered to be accurate, however, no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use thereof. Vendor assumes no responsibility for injury or third person proximately caused by the material if reasonable safety measures are not adhered to as stipulated in the data sheet. Additionally, vendor assumes no responsibility for injury to vendee or third person proximately caused by abnormal use of the material even if reasonable safety procedures are followed. Furthermore, vendee assumed the risk in his use of the material.