TREEFLEX HARNESS NEW patented TreeFlex safety harness. Ergonomically designed to give increased comfort during periods of prolonged use. Anatomically designed back pad The back pad follows the curves of the pelvic girdle to distribute weight onto the sacrum. Very little pressure is placed on the lower spine, allowing flexibility and reducing the risk of lower spine stiffness. Raised sacrum pad and custom designed chainsaw clip point The chainsaw should always be clipped onto the centre back clip point provided. This will pull the sacrum pad down for comfort and stabilise the harness. Anatomically designed leg loops Independently articulating leg loops support the legs in the most efficient position, allowing unrestricted movement of the hip joint. Small: 32" 36" Medium: 36" - 40" Large: 40" - 44" Size relates to hip measurement EN-358, EN-813 Hexafoam pad lining Used to line the latest clothing for professional sportsmen, we have used it to distribute pressure points effectively and to increase flexibility and comfort. TREEFLEX CHEST HARNESS TREEFLEX ACCESORIES TREEFLEX HARD SEAT By attaching Attack Support harness to blue attachment point on front waist belt the combined harness now has a front fall arrest attachment point. EN 361 Remove attachment rings or swivels depending on preference. Different sized bridges to suit needs. Replacement bridge components can be ordered if required. Removable hard seat available for the TreeFlex and other harnesses. Ideal for use during prolonged suspension. Aluminium seat provides support without compressing the sciatic nerve or reducing circulation in the legs. Three large gear loops on base for equipment storage. One size and not PPE
CHEST HARNESS CRESTO 2140 SKY BELT For use in combination with sit harness Cresto 2131. S, M, L, XL Adjustable shoulder straps Fixed frontal attachment point for positioning Waist belts D rings at side for attaching to support equipment system Padded chest harness SIT HARNESS CRESTO 2131 SKY BELT Arborist sit harness with soft seat. Can be completed with chest harness Cresto 2140. EN 358, EN 813 SIT HARNESS CRESTO 2125 SKY MAX Running frontal D-ring for attachment Removable hard seat Arborist sit harness developed to ensure limitless freedom of movement. EN 358, EN813
STEITZ MS 597 Chainsaw Class 1 Safety Boot GORE-TEX Lining Sizes: EU 39-47 ISO EN 20345:2007, S3, SRC STEITZ MS 600 Linesman Safety Boot GORE-TEX Lining Sizes: EU 39-47 ISO EN 20345:2007, S3, SRC STAVANGER BAU GORE Safety Boot GORE-TEX Lining Sizes: 39-47 ISO EN 20345:2007, S3, SRC FOOTSURE FS 198 Safety Boot Fully Waterproof Sizes: EU 37-47 ISO 20345, S3, W/P, SRC FOOTSURE FS 32 Safety Boot Waterproof Hiker Sizes: EU 39-47 ISO 20345, SR-P-W/P FOOTSURE FS 999 Composite Safety Boot Fully Waterproof Sizes: 39-49 ISO 20345, S3, HRO, WP
550 SOLO PILOT 533 STAFFA LORY DESCENDER Rope clamp for use with a chest harness. Can be used on ropes Ø 8-13mm. Weight 145g EN 567 Ascenders with insulated, ergonomic handles for efficient movement along fixed lines. Can be used on ropes Ø 8-13mm. Weight 210g EN 567 Stirrup system for use with Pilot ascenders. Adjustable length Aluminium rods for a rigid stepping platform Weight 160g CE marked A self locking belay device that is suitable for descending, ascending and mechanical advantage hauling systems. Two locking positions, engaged by under or over extension of release handle for maximum safety. Descent speed can be controlled up to 2 m/s. 125 x 70 x 35 mm Weight: 365g Rope Ø: 9-11.4 mm pren 15151 1229 -SMALL PULEY FIXED 1099-SMALL PULLEY 1098-BIG PULLEY 1097-SMALL PULLEY Small single pulley with fixed flanges. Accommodates ropes up to Ø 12 mm. Maximum working load: 5 kn Maximum breaking strength: 20 kn Weight: 90g Small single pulley with moveable flanges. Accommodates ropes up to Ø 12mm. Maximum working load: 5 kn Maximum breaking strength: 20 kn Weight: 120g Large single pulley with movable flanges. Accommodates ropes up to Ø 15mm. Maximum working load: 8 kn Maximum breaking strength: 32 kn Weight: 250g Parallel double pulley with moveable flanges. Particularly useful in the construction of block and tackle systems. Accommodates ropes up to Ø 15mm. Maximum working load: 8 kn Maximum breaking strength: 32kN Weight: 430g
A327 Triple Action Quicklock Aluminium Karabiner Oval Shaped Locking Biner Strength (Gate Closed): 25 kn Strength (Gate Open): 7 kn Strength (Minor Axis): 12 kn Gate Opening: 22 mm Weight: 72 g A367 Aluminium 3 Stage Quicklock Pear Shaped Karabiner Excellent value HMS locking biner Strength (Gate Closed): 25 kn Strength (Gate Open): 8 kn Strength (Minor Axis): 10 kn Gate Opening: 19 mm Weight: 89 g KU 19 Cambium saver with aluminium or steel rings Length: 1.0 m, 1.3 m CAMBIUM SAVER RETRIEVER A device used to retrieve cambium saver. 352-3 ROPE GRAB Ascent/Arrest rope range: 9-11mm Alternative rope grabs available ARB SLINGS FU 02 M FU 02 L FU 02 S Sling S, M, L A RANGE OF ROPES FROM CLIMBING THROUGH TO LOWERING ARE AVAILABLE