Advanced Calibration Designs, Inc. goacd.com Certified Calibration Gas Solutions
Table of Contents We Provide The Ultimate Calibration Gas Solution... 4 How to Buy... 4 CAL2000 Instrument & Accessories...5 CAL 2000... 6 CAL 2000 Gas Options...6 CAL2000 Instrument & Accessories...7 Specifications...7 CAL 2000LT... 8 CAL 2000LT Gas Options...8 CAL2000LT Instrument & Accessories...9 Specifications...9 GENie Calibration Gas System... 10 GENie EC... 12 GENie EC Gas Options... 12 GENie EC Instrument & Accessories... 13 Specifications... 13 GENie O3... 14 GENie O3 Ozone Gas Options...14 GENie O3 Instrument & Accessories... 15 Specifications... 15 GENie QC-1... 16 GENie QC-1 Gas Options...16 GENie QC-1 Instrument & Accessories... 17 Specifications... 17 CAL 101... 18 CAL 101 Gas Options...18 CAL 101 Instrument & Accessories...19 Specifications...19 MiniBump... 20 MiniBump Gas Options... 20 MiniBump Bump Tester & Accessories... 21 Specifications... 21 QC-50 Calibration Gas Bump Tester... 22 QC-50 and Bump Tester, Gas Options & Accessories... 22 Specifications... 22 QC-100 Calibration Gas Bump Tester... 23 QC-100 Bump Tester, Gas Options & Accessories... 23 Specifications... 23 Standard Warranty Gas Calibration Instruments... 24
We Provide The Ultimate Calibration Gas Solution ACD s certified calibration gas instruments and generating sources replace gas cylinders as an accurate, safe and easy to use solution. How to Buy Our full line of products and accessories are sold only by authorized distributors. Please visit www.goacd.com or call 800-737-0223 to find a distributor in your area. 4
P/N 525-0011-01 PINCH HERE TO BREAK INNER AMPOULE POWER SELECT Press and Hold 3 seconds Tucson, Arizona, U.S.A. POWER SELECT Press and Hold 3 seconds Tucson, Arizona, U.S.A. Flow trim Empty Green / Cell Tucson Arizona USA Red / Battery Full Press and Hold 3 Seconds Advanced Calibration Designs Tucson, Arizona, USA Eject Outlet Advanced Calibration Designs. Tucson, AZ USA 1-800-737-0223 www.goacd.com Outlet Advanced Calibration Designs. Tucson, AZ USA 1-800-737-0223 www.goacd.com Vial Adjust Vial Insert Outlet Advanced Calibration Designs. Tucson, AZ USA 1-800-737-0223 www.goacd.com Advanced Calibration Designs Tucson, Arizona, USA CAL2000 Instrument & Accessories Cal 2000 Cal 2000lt ACD Advanced Calibration Designs ACD Advanced Calibration Designs CAL 101 Status MiniBump Gas Generator EC O3 QC-100 QC-50 Gas Sources Demand Flow Capable Flow Rate Ammonia CAL 2000 CAL 2000LT CAL-101 MiniBump GENie EC GENie O3 GENie QC-1 QC-100 QC-50 0.2 to 1 LPM 0.5 or 1 LPM* 0.5 or 1.0 LPM 0.5 LPM 0.2 to 1 LPM 0.2 @ 1.0PPM - 1.0 @ 0.2 PPM Variable N/A N/A 20-1000 or 10-500 PPM Bump Test Bump Test Chlorine.05-1 or.5-50 PPM 1-25 PPM 1-25 PPM 1-25 PPM >5 PPM.05-5 or.5-50 PPM Chlorine Dioxide.5-5 PPM.5-5 PPM Hexane Bump Test Bump Test Hydrogen.05-1 or.5-50 PPM 1-25 PPM 1-25 PPM 1-25 PPM >25 PPM.5-50 or 50-500 PPM Hydrogen Chloride Bump Test Bump Test Hydrogen Cyanide.05-1 or.5-50 PPM 1-25 PPM 1-25 PPM 1-25 PPM >10 PPM.05-5 or.5-50 PPM Hydrogen Sulfide.05-1 or.5-50 PPM 1-25 PPM 1-25 PPM 1-25 PPM >25 PPM.05-15or.5-50 PPM Nitrogen Dioxide.05 to 5 PPM Ozone.2-1 PPM Toluene Bump Test Bump Test Concentration Adjustable Cell Defined Cell Defined Cell Defined Adjustable Adjustable Adjustable N/A N/A Certifications Accuracy Available generating life Non-hazardous shipping CE,ATEX, CSA ± 5% or ± 10% 10, 50, 100 hours CE,ATEX, CSA ± 5% or ± 10% 10, 25 hours CE ± 20% 2 hours CE, ATEX, CSA ± 20% Up to 1000 tests or 5 hours N/A ± 5% or ± 10% 10, 50, 100 hours N/A ± 5% or ± 10% 500 hours N/A ± 10% 96 hours (8 hours / vial) N/A N/A 8 hours/vial N/A N/A 8 hours/vial 5
CAL 2000 CALIBRATION GAS INSTRUMENT The CAL 2000 provides unmatched versatility and accuracy in corrosive calibration gases. Field replaceable electrochemical generating sources provide a standard for accurately calibrating chlorine, chlorine dioxide, hydrogen, hydrogen cyanide, and hydrogen sulfide gas sensors. The CAL 2000 is microprocessor controlled and has an LCD display allowing field adjustable concentration and flow rate. The generating sources are interchangeable and field replaceable. Best of all, the CAL 2000 generating source provides up to 50 times as much calibration gas as a disposable cylinder at approximately the cost of just two cylinders. The CAL 2000 gas instrument has a built-in mass flow sensor that automatically compensates for altitude and temperature. Demand flow capable. CSA NRTL/C Exia T-6 approved intrinsically safe with CE mark and ATEX certification. NIST traceable certification. Adjustable PPM and flow rate. Automatic purge on shut down. Interchangeable calibration gases. Low power consumption. Alkaline battery powered. CAL 2000 Gas Options Gas PPM H2 Hydrogen.05-500 ClO2 Chlorine Dioxide 0.5-5.0 H2S Hydrogen Sulfide.05-50 HCN Hydrogen Cyanide.05-50 Cl2 Chlorine.05-50 Concentration Adjustable Certifications CE, ATEX, CSA Accuracy ± 5% or ± 10% Available generating life 10, 50, 100 hrs. Non-hazardous shipping Interchangeable gases No shelf degradation Mass flow feedback 6
CAL2000 Instrument & Accessories What s Included? CAL 2000LT instrument with nylon carrying case, batteries hose and instruction manual. Sources are not included. A source is required to run the instrument and are interchangeable. Order sources as required from the list below. Instrument 750-0603-00 CAL 2000 Instrument Sources PPM Gas Size Hrs 510-2000-10 0.5-50 Cl2 (chlorine) 10 510-2000-00 0.5-50 Cl2 chlorine) 50 510-2000-20 0.5 50 Cl2 (chlorine) Double life 100 510-2000-15 0.05-1.0 Cl2 (chlorine) Micro 10 510-2000-05 0.05-1.0 Cl2 (chlorine) Micro 50 510-2000-25 0.05-1.0 Cl2 (chlorine) Micro double life 100 510-2060-10 0.5 5 ClO2 (chlorine dioxide) 10 510-2060-00 0.5 5 ClO2 (chlorine dioxide) 50 510-2060-20 0.5 5 ClO2 (chlorine dioxide) Double life 100 510-2090-10 0.5 50 H2 (hydrogen) 10 510-2090-00 0.5 50 H2 (hydrogen) 50 510-2090-20 0.5 50 H2 (hydrogen) Double life 100 510-2050-10 0.5 50 H2S (hydrogen sulfide) 10 510-2050-00 0.5 50 H2S (hydrogen sulfide) 50 510-2050-20 0.5-50 H2S (hydrogen sulfide) Double life 100 510-2050-15 0.05-1.0 H2S (hydrogen sulfide) Micro 10 510-2050-05 0.05-1.0 H2S (hydrogen sulfide) Micro 50 510-2050-25 0.05-1.0 H2S (hydrogen sulfide) Micro double life 100 510-2070-10 0.5 50 HCN (hydrogen cyanide) 10 510-2070-00 0.5 50 HCN (hydrogen cyanide) 50 510-2070-20 0.5-50 HCN hydrogen cyanide) Double life 100 510-2070-15 0.1-2.0 HCN (hydrogen cyanide) Micro 10 510-2070-05 0.1-2.0 HCN (hydrogen cyanide) Micro 50 510-2070-25 0.1-2.0 HCN (hydrogen cyanide) Micro double life 100 (PPM is variable with flow rate, output given at 0.5 LPM) Accessories 362-0600-00 Continuous operation adapter, 115VAC with US plug 730-0615-00 Hard body carrying case Replacement Parts 193-0101-01 Electrolyte, ClO2, 15 ml vial 193-0101-05 Electrolyte, ClO2, 15 ml vial, 5 pack 193-0101-10 Electrolyte, ClO2, 15 ml vial, 10 pack 193-0101-25 Electrolyte, ClO2, 15 ml vial, 25 pack 106-0603-01 Plunger feet fastener 113-0400-00 Outlet Fitting, body (1/8 NPT) quick connect 113-0402-00 Hose connector, insert (hose barb) quick connect 150-0121-00 Charcoal filter element 150-0131-00 Charcoal filter element, package of 12 715-0405-0X Hose, with quick connect, 5 730-0603-00 Nylon carrying case Specifications Air Flow Rate (with internal pump) 0.2 to 1 (with internal pump) Sample draw rate 0.2 to 5 LPM (with pump disabled) Useful Source Life 10, 50 or 100 hours Warm-up time (to 90%) Approx. 5 minutes. L x W x H 8.50 x 4.25 x 3.00 (21.59 x 10.8 x 7.62 cm) Weight 3 lb. (1360 g) Operating Temperature 0 C to 50 C Relative Humidity (intermittent use) 0-100% Accuracy ±10% (±5% available) Repeatability ±5% Battery Power 4 alkaline C Battery Life 10 hours (at.5 LPM flow rate) H 2 ClO 2 H 2 S HCN Cl 2 7
CAL 2000LT CALIBRATION GAS INSTRUMENT The CAL 2000 LT is an economical alternative for calibration of corrosive gas detection equipment. The CAL 2000 LT is a microprocessor controlled calibration gas instrument with interchangeable and field replaceable gas generating sources. Each source provides up to 25 cylinders or 25 hours worth of gas at a fraction of the cost. A built-in mass flow sensor automatically compensates for altitude and temperature. The instrument is available in preset flow-rates of 0.5 or 1.0 LPM. Generating sources are rated at 10 or 25 hours and are available for chlorine, hydrogen, hydrogen cyanide and hydrogen sulfide. A gas concentration must be specified when ordering generating sources over a range of 1 to 25 PPM in whole PPM increments. To change gas type or concentration simply insert a different source into the instrument. CSA NRTL/C Exia T-6 approved intrinsically safe with CE mark and ATEX certification Non-hazardous shipping Built-in mass flow sensor Alkaline battery powered NIST traceable certificate Interchangeable calibration gases Multiple languages included CAL 2000LT Gas Options Gas PPM H2 Hydrogen 1.0-25 H2S Hydrogen Sulfide 1.0-25 HCN Hydrogen Cyanide 1.0-25 Cl2 Chlorine 1.0-25 Concentration Source defined Certifications CE, ATEX, CSA Accuracy ± 5% or ± 10% Available generating life 10, 25 hrs. Non-hazardous shipping Interchangeable gases No shelf degradation Mass flow feedback 8
H 2 CAL2000LT Instrument & Accessories What s Included? CAL 2000LT instrument with nylon carrying case, batteries hose and instruction manual. Sources are not included. A source is required to run the instrument and are interchangeable. Order sources as required from the list below. Instrument 750-0603-00-LT CAL 2000LT Instrument (*Specify flow rate when ordering) Sources Gas Hrs PPM 510-2000-LT Cl2 (chlorine) 10 Specify* 510-2005-LT Cl2 (chlorine) 25 Specify* 510-2090-LT H2 (hydrogen) 10 Specify* 510-2095-LT H2 (hydrogen) 25 Specify* 510-2050-LT H2S (hydrogen sulfide) 10 Specify* 510-2055-LT H2S (hydrogen sulfide) 25 Specify* 510-2070-LT HCN (hydrogen cyanide) 10 Specify* 510-2075-LT HCN (hydrogen cyanide) 25 Specify* *Specify PPM when ordering. Accessories 362-0600-00 Continuous operation adapter, 115VAC with US plug 730-0615-00 Hard body carrying case Replacement Parts 106-0603-01 Plunger feet fastener 113-0400-00 Outlet fitting, body (1/8 NPT) quick connect 113-0402-00 Hose connector, insert (hose barb) quick connect 150-0121-00 Charcoal filter element 150-0131-00 Charcoal filter element, package of 12 715-0405-0X Hose, with quick connect, 5 730-0603-00 Nylon carrying case Specifications Air Flow Rate (with internal pump) 0.5 or 1 LPM flow rate must be specified when ordering) Useful Source Life 10 or 25 hours Warm-up time (to 90%) Approx. 5 minutes. L x W x H 8.50 x 4.25 x 3.00 (21.59 x 10.8 x 7.62 cm) Weight 3 lb. (1360 g) Operating Temperature 0 C to 50 C Relative Humidity (intermittent use) 0-100% Accuracy ±10% Repeatability ±5% Battery Power 4 alkaline C Battery Life 10 hours (at.5 LPM flow rate) H 2 S HCN Cl 2 9
GENie Calibration Gas System INTEGRATED AND EXPANDABLE The GENie Calibration Gas System is an integrated and expandable solution for hard to find calibration gas sources. Compact, hand-held, accurate, economical and rugged, this family of integrateable and expandable calibration gas instruments will generate a variety of gases from one modular instrument. As your calibration gas needs grow, so does the GENie, with integrated, expandable Source Modules that provide for a cost effective solution. 10
One GENie Base Unit plus any of the three interchangeable and expandable GENie Source Modules enable the instrument to produce the required certified calibration gas. GENie Base Unit calibration gas system Advanced Calibration Designs. Tucson, AZ USA 1-800-737-0223 www.goacd.com Select Power Integrated microprocessor controlled feedback. Utilizes a mass flow controller for accurate flow rates across all instruments. Capable of future expansion beyond one gas type. Multiple languages included. NIST traceable. Eject Outlet EC Outlet O3 Outlet Vial Adjust Advanced Calibration Designs. Tucson, AZ USA 1-800-737-0223 www.goacd.com Advanced Calibration Designs. Tucson, AZ USA 1-800-737-0223 www.goacd.com Vial Insert Advanced Calibration Designs. Tucson, AZ USA 1-800-737-0223 www.goacd.com GENie EC Source Module Adjustable gas concentrations created on demand. Interchangeable generating sources. Expandable concentrations and gases. Non-hazardous transport. Ideal for demand flow or diffusion applications. GENie O3 Source Module Most accurate source of O3 calibration gas on the Market. Selectable concentrations. Compact, portable hand-held design. Long life & simple to use. GENie QC-1 Source Module 96 hours of source gas included. Disposable gas vials have unlimited shelf life. Most accurate source of NH3 calibration gas on the market. Non-hazardous transport. 11
GENie EC CALIBRATION GAS INSTRUMENT The GENie EC is one of our most compact and user-friendly instruments. The GENie EC is our most accurate, diverse, compact and user-friendly instrument. Certified calibration gas sources provide the equivalent of up to 100 compressed gas cylinders. Interchangeable gases, adjustable concentrations, demand flow capable and the ability to provide the lowest most accurate concentrations in the industry make the GENie EC the smart choice for calibration professionals. Adjustable calibration gas concentrations created on demand. Interchangeable generating sources. Expandable concentrations and gases. Integrated microprocessor controlled feedback. Non-hazardous transport. Ideal for demand flow or diffusion applications. English, French, German, Portuguese and Spanish user interfaces are included. GENie EC Gas Options Gas PPM H2 Hydrogen.05-500 ClO2 Chlorine Dioxide 0.5-5.0 H2S Hydrogen Sulfide.05-50 HCN Hydrogen Cyanide.05-50 Cl2 Chlorine.05-50 NO2 Nitrogen Dioxide.05 to 5.0 PPM Concentration Adjustable Accuracy ± 5% or ± 10% Available generating life 10, 50 or 100 hours / cell Non-hazardous shipping Interchangeable gases No shelf degradation Mass flow feedback 12
H 2 GENie EC Instrument & Accessories What s Included? GENie EC instrument with nylon carrying case, batteries hose and instruction manual. Sources are not included. A source is required to run the instrument and are interchangeable. Order sources as required from the list below. Instrument 750-0200-01 GENie EC Instrument Sources PPM Gas Size Hrs 510-0200-15.05-5 Cl2 (chlorine) Micro 10 hrs 510-0200-05.05-5 Cl2 (chlorine) Micro 50 hrs 510-0200-25.05-5 Cl2 (chlorine) Double life micro 100 hrs 510-0200-10.5-50 Cl2 (chlorine) 10 hrs 510-0200-00.5-50 Cl2 (chlorine) 50 hrs 510-0200-20.5-50 Cl2 (chlorine) Double life 100 hrs 510-0206-10.5-5 ClO2 (chlorine dioxide) 10 hrs 510-0206-00.5-5 ClO2 (chlorine dioxide) 50 hrs 510-0206-05.5-5 ClO2 (chlorine dioxide) Double life 100 hrs 510-0209-10.5-50 H2 (hydrogen) 10 hrs 510-0209-00.5-50 H2 (hydrogen) 50 hrs 510-0209-20.5-50 H2 (hydrogen) Double life 100 hrs 510-0201-09 50-500 H2 (hydrogen) High output 100 hrs 510-0205-15.05-5 H2S (hydrogen sulfide) Micro 10 hrs 510-0205-05.05-5 H2S (hydrogen sulfide) Micro 50 hrs 510-0205-25.05-5 H2S (hydrogen sulfide) Double life micro 100 hrs 510-0205-10.5-50 H2S (hydrogen sulfide) 10 hrs 510-0205-00.5-50 H2S (hydrogen sulfide) 50 hrs 510-0205-20.5-50 H2S (hydrogen sulfide) Double life 100 hrs 510-0207-15.05-5 HCN (hydrogen cyanide) Micro 10 hrs 510-0207-05.05-5 HCN (hydrogen cyanide) Micro 50 hrs 510-0207-25.05-5 HCN (hydrogen cyanide) Double life micro 100 hrs 510-0207-10.5-50 HCN (hydrogen cyanide) 10 hrs 510-0207-00.5-50 HCN (hydrogen cyanide) 50 hrs 510-0207-20.5-50 HCN (hydrogen cyanide) Double life 100 hrs 510-0202-05.05-5 NO2 (nitrogen dioxide) 50 hrs 510-0202-15.05-5 NO2 (nitrogen dioxide) 100 hrs Accessories 730-0615-00 Hard Body Case 362-0010-00 External Battery Extender (adds up to 13 hours of use) 362-0600-01 Continuous Operation Adapter (specify country) Replacement Parts 730-0201-00 Nylon Carrying Case 113-0400-00 Outlet Fitting 113-0402-00 Hose Connector Insert 243-0101-00 Magnetic Tip Screwdriver 715-0405-0X 5 Foot Hose with Quick Connect 150-0120-00 External Charcoal Filter Assembly, GENie Series Specifications Air flow rate (with internal pump) 0.2 to 1 LPM Sample draw rate (with pump disabled) 0.1 to 1.2 LPM Source life 10, 50 or 100 hours / source Warm-up time (to 90%) Approx. 2 minutes L x W x H 5 W x 3.88 H x 3.13 D Weight 2 lb. (1360 g) Operating temperature 0 C to 50 C Relative humidity (intermittent use) 0-100% Accuracy ±10% Repeatability ± 5% Battery power 4 Alkaline AA Battery life 8 hours (at.5 LPM flow rate) ClO 2 H 2 S HCN Cl 2 NO 2 (PPM is variable with flow rate, output given at 0.5 LPM) 750-0202-02 GENie O3 Source Module (includes source) 750-0202-03 GENie QC-1 Source Module (includes source) 13
GENie O3 CALIBRATION GAS INSTRUMENT The GENie O3 portable calibration gas standard is small and lightweight for calibrating the most difficult to reach Ozone sensors. The GENie O3 will calibrate nearly any Ozone gas sensor or detection system on the market by utilizing its internal mass flow sensor and ultraviolet light source to provide accurate levels of Ozone gas to the end user. Ozone gas cannot be stored in cylinders and must be generated on site, therefore there are no calibration gas cylinders of ozone available on the market. The GENie O3 comes with an NIST certificate of calibration to +/- 10 %, providing exceptional accuracy as well as high precision. The unparalleled long life source in the instrument has an expected life of up to five hundred hours of use, allowing for extremely low cost calibrations over the life of the source. Most accurate source of ozone calibration gas on the market. Selectable concentrations. Integrated microprocessor controlled feedback. Compact, portable hand-held design. Long life. Simple to use. English, French, German, Portuguese and Spanish user interfaces are included. GENie O3 Ozone Gas Options Gas PPM O3 Ozone 0.2-1.0 PPM Concentration Adjustable Accuracy ± 5% or ± 10% Available generating life Up to 500 hours Non-hazardous shipping No shelf degradation Mass flow feedback 14
O GENie O3 Instrument & Accessories What s Included? GENie Base Unit, GENie O3 Source Module, 1 hose, nylon carrying case, batteries and manual Instrument 750-0200-02 GENie O3 Instrument Sources 750-0202-01 GENie EC Module Source is not included. See GENie EC for source list. 750-0202-03 GENie QC-1 Source Module (includes source) Accessories 362-0600-01 Continuous operation adapter, (specify country) plug 362-0010-00 External battery extender (does not include batteries) 730-0615-00 Hard body case Replacement Parts 113-0402-00 Hose connector, insert (hose barb) quick connect 715-0405-0X Hose, with quick connect, 5 730-0201-00 Nylon carrying case, GENie 113-0400-00 Outlet fitting, body (1/8 NPT) quick connect 243-0101-00 Tool, ACD magnetic tip screwdriver 150-0120-00 External charcoal filter assembly, GENie series Specifications Air Flow Rate (with internal pump) Variable Useful Source Life Up to 500 hours Warm-up time (to 90%) Approx. 2 minutes. L x W x H 5.00 x 3.88 x 3.13 (12.7 x 9.85 x 7.95 cm) Weight 2 lb. (907 g) Operating Temperature 0 C to 50 C Relative Humidity (intermittent use) 0-100% Accuracy ±10% (±5% available) Repeatability ±5% Battery Power 4 alkaline aline AA Battery Life 6 hours 15
GENie QC-1 CALIBRATION GAS INSTRUMENT The GENie QC-1 ammonia calibration gas instrument - Compact, rugged and adjustable. The GENie QC-1 generates ammonia calibration gas by utilizing a sealed glass ampule that is broken for use, the GENie QC-1 is the perfect tool for anyone calibrating fixed or portable ammonia sensors. With user adjustable outputs, the GENie QC-1 can be set to a wide range of outputs allowing for calibration of nearly any ammonia detector on the market. The GENie QC-1 is compact and rugged allowing for use in the harshest environments. The easy to read LED display along with the instruments ergonomic design and nylon carrying case creates ease of use and portability. Once each ammonia vial has been broken for use, the GENie QC-1 will provide up to eight hours of continuous calibration gas before the vial is discarded, making the GENie QC-1 extremely cost effective. 96 hours of source gas included. Integrated microprocessor controlled feedback. Disposable gas vials have unlimited shelf life. Non-hazardous transport. The most accurate source of NH3 calibration gas on the market. Simple to use, NIST traceable. GENie QC-1 Gas Options Gas PPM NH3 Ammonia 20-1000 or 10-500 Concentration Adjustable Accuracy ± 10% Available generating life 8 hours / vial Non-hazardous shipping Interchangeable gases No shelf degradation Mass flow feedback 16
NH GENie QC-1 Instrument & Accessories What s Included? GENie Base Unit, GENie QC-1 Source Module, 5 hose, nylon carrying case, batteries and manual. Instrument 750-2000-03 GENie QC-1 Instrument Sources 750-0202-01 GENie EC Module Source is not included. See GENie EC for source list 750-0202-02 GENie O3 Module Includes source (100 hrs.) Accessories 525-0001-12 NH3 (ammonia) QCV, 12 pack 362-0600-01 Continuous operation adapter, (specify country) plug 362-0010-00 External battery extender (does not include batteries) 730-0615-00 Hard body case Replacement Parts 113-0402-00 Hose connector, insert (hose barb) quick connect 715-0405-0X Hose, with quick connect, 5 730-0201-00 Nylon carrying case, GENie 113-0400-00 Outlet fitting, body (1/8 NPT) quick connect 243-0101-00 Tool, ACD magnetic tip screwdriver 150-0120-00 External charcoal filter assembly, GENie series Specifications Air Flow Rate (with internal pump) Variable Useful Source Life 8 hours / vial Warm-up time (to 90%) Approx. 5 minutes. L x W x H 5.00 x 3.88 x 3.13 (12.7 x 9.85 x 7.95 cm) Weight 2 lb. (907 g) Operating Temperature 0 C to 50 C Relative Humidity (intermittent use) 0-100% Accuracy ±10% (±5% available) Repeatability ±5% Battery Power 4 alkaline AA Battery Life 5 hours approx. 17
CAL 101 CALIBRATION GAS INSTRUMENT Our most economical electrochemical gas instrument. The CAL 101 calibrates different gas detection systems and gases with one instrument. Its field interchangeable calibration gas sources enable the ability to switch gases on the fly and provide a calibration standard for accurately testing Chlorine, Hydrogen Sulfide, Hydrogen and Hydrogen Cyanide sensors. This calibration method is approved under the ISO DIS 6145-11 standards. The CAL 101 is non-hazardous to ship and will not degrade over time. The electrochemical generating source is interchangeable and provides multiple gas and concentration options quickly, safely and easily. By simply inserting the appropriate source in the instrument, the user is ready to calibrate. The CAL 101 is safe and easy to use for even the least accessible detection points. Simply insert the gas generating source and you are ready to calibrate Non-Hazardous shipping Compact hand-held design Low power consumption Interchangeable calibration gases and concentration Lowest cost calibration Alkaline battery powered CAL 101 Gas Options Gas PPM Cl2 Chlorine 1-25 HCN Hydrogen Cyanide 1-25 H2 Hydrogen 1-25 H2S Hydrogen Sulfide 1-25 Flow.5 LPM or 1.0 LPM Concentration Source defined Accuracy ± 10% Available generating life 2 hours Non-hazardous shipping Interchangeable gases No shelf degradation Mass flow feedback No 18
H 2 CAL 101 Instrument & Accessories What s Included? CAL 101 Instrument (specify flow) includes flow meter, batteries, carrying case, hose, manual. Instrument 750-0101-00 CAL 101 Instrument Calibration Sources Part Number Gas Capacity PPM Range 1 25 PPM 510-0101-00 Cl2 (chlorine) 2 hours Specify* 510-0101-09 H2 (hydrogen) 2 hours Specify* 510-0101-05 H2S (hydrogen sulfide) 2 hours Specify* 510-0101-07 HCN (hydrogen cyanide) 2 hours Specify* Bump Sources Specifications Air Flow Rate 0.5 or 1 LPM Useful Source Life 2 hours Warm-up time (to 90%) Approx. 1 minute L x W x H 5.0 W x 3.5 H x 1.5 D Weight 1 lb. (454 g) Operating Temperature 0 C to 50 C Relative Humidity (intermittent use) 0-100% Accuracy ±10% Battery Power 2 alkaline A Battery Life Approx. 4 hrs. (at.5 LPM flow rate) ClO 2 H 2 S HCN Cl 2 510-0102-00 Cl2 (chlorine) 350 tests >5 510-0102-09 H2 (hydrogen) 350 tests >25 510-0102-05 H2S (hydrogen sulfide) 350 tests >25 510-0102-07 HCN (hydrogen cyanide) 350 tests >10 Accessories 730-0415-00 Hard Body Case Replacement Parts 730-0101-00 Nylon Carrying Case 120-0101-01 External flow check assy. 113-0400-00 Outlet Fitting, body (1/8 NPT) quick connect 113-0402-00 Hose connector, insert (hose barb) quick connect 243-0101-00 Tool, ACD magnetic tip screwdriver 715-0405-0X Hose, with quick connect, 5 19
MiniBump CALIBRATION GAS OR BUMP TESTER The MiniBump for intrinsically safe and economical bump testing. The MiniBump is the smallest, most lightweight and adaptive calibration gas source on the market. It is our lowest entry cost product as well as our simplest to use. It is certified to be intrinsically safe for operation in potentially explosive atmospheres. The MiniBump operates with interchangeable generating sources providing either fixed concentration output for calibration, or bump output to drive your detector into alarm for operational verification. Available in hydrogen sulfide, chlorine, hydrogen and hydrogen cyanide. The complete device fits into your shirt pocket and provides the equivalent of 5-58 liter cylinders of gas with each generating source. The MiniBump is approved INTRINSICALLY SAFE by CSA NRTL/C Exia T-6. Interchangeable calibration gases Automatic shut down after each test Alkaline battery powered Disposable generating source ATEX II3G EEx nl IIB T4 approved CSA NRTL/C Exia T-6 approved intrinsically safe with CE mark MiniBump Gas Options Gas PPM Cl2 Chlorine 1-25 HCN Hydrogen Cyanide 1-25 H2 Hydrogen 1-25 H2S Hydrogen Sulfide 1-25 Concentration Source defined Accuracy ± 10% Available generating life Source defined Non-hazardous shipping Interchangeable gases No shelf degradation Mass flow feedback No 20
H 2 MiniBump Bump Tester & Accessories 750-0401-00 - MiniBump Instrument, Less Source What s included: MiniBump instrument complete, less source. Sources (Gas Options) Part Number Gas Capacity (Hrs) PPM Range 1 25 PPM 510-0401-0X Cl2 (chlorine) 5 Specify* 510-0451-0X H2 (hydrogen) 5 Specify* 510-0471-0X H2S(hydrogen sulfide) 5 Specify* 510-0491-0X HCN(hydrogen cyanide) 5 Specify* Bump Sources Part Number Gas Capacity (Bump Cycles) Approx. PPM Output 510-0500-01 Cl2 (chlorine) 350 5 510-0590-02 H2 (hydrogen) 350 25 510-0550-02 H2S (hydrogen sulfide) 350 25 510-0570-02 HCN (hydrogen cyanide) 350 10 Accessories 210-0400-00 Wall mount case for MiniBump 730-0415-00 Hard body carrying case Replacement Parts 115-0400-00 Screw cap, with hose fitting, MiniBump 250-0401-00 Battery cover, MiniBump 715-0405-0X Hose, with quick connect, 5 Specifications Useful Source Life Source defined Bump Test Time Less than 120 seconds Intrinsically Safe Class 1, Division 1, Groups A, B, C, D L x W x H 4.09 x 2.36 x 1.18 (10.4 x 6.0 x 3.0 cm) Weight 0.5 lb. (220 g) Operating Temperature -40 C to 50 C Relative Humidity (intermittent use) 0-100% Battery Power 2 alkaline AA Battery Life 10 hours H 2 S HCN Cl 2 21
QC-50 Calibration Gas Bump Tester CALIBRATION GAS BUMP TESTER Easy, reliable and portable bump testing. The QC-50 utilizes revolutionary technology allowing a functional check (or Bump Test ) as needed or required by law. The unique QuickCheck Vial (QCV) utilizes a stable, safe and reliable delivery method allowing ease of shipment, storage and use. Breaking a QCV ampoule and inserting it into the bulb allows the liquid to absorb into a filter which then diffuses out the gas. Simply squeezing the hand aspirated bulb will allow a test concentration of gas to flow by the gas detector, verifying its operation. Disposable source vials Interchangeable calibration gases QC-50 and Bump Tester, Gas Options & Accessories 850-1050-00 - QC-50 Kit What s included: QC-50, belt pack, manual, 5 hose and 12 QCV vials (specify gas). 750-1050-00 - QC-50 What s included: QC-50, 5 hose, manual. Quick Check Vials (Gas Options) 525-0001-12 NH3 (Ammonia) 12 Pack 525-0002-12 HCl (Hydrogen Chloride) 12 Pack 525-0003-12 C7H8 (Toluene) 12 Pack 525-0004-12 C6H14 (Hexane) 12 Pack Accessories 730-0415-00 Hard body carrying case, Replacement Parts 715-0405-0X Hose, with quick connect, 5 730-1050-00 Nylon carrying case Specifications Useful Vial Life Up to 8+ hours per vial Warranty One year Dimensions (QC-50) 2 x 7.2 (5 x 18.4 cm) Dimensions (QCV) 0.4 x 1.3 (1.1 x 3.4 cm) Weight (QC-50) 2.5 oz (75 gm) Weight (QCV).14 oz (4 gm) Operating Temperature Nominal @ 20 C Relative Humidity (intermittent use) 0-100% 22
QC-100 Calibration Gas Bump Tester CALIBRATION GAS BUMP TESTER Stable, safe, reliable, adjustable and expandable bump testing. The QC-100 utilizes revolutionary technology allowing a calibration functional check or Bump Test as needed. The unique QuickCheck Vials (QCV) uses a stable, safe and reliable delivery method allowing ease of shipment, storage and use. The QCV used in the QC-100 are small, disposable vials. Breaking the inner ampoule allows the liquid to absorb into a filter which then diffuses out the gas. The motorized pump in the QC-100 provides a continuous output of calibration check gas, and the needle-valve allows users to adjust the amount of gas being generated. This gas concentration can be checked against a calibrated instrument for higher accuracy, or simply used as a bump test device. Simple to use Adjustable output CE Approved Alkaline battery powered Non-hazardous shipping and disposal Expandable when future gases are added QC-100 Bump Tester, Gas Options & Accessories 750-1100-00 - QC-100 Instrument What s included: QC-100 instrument, batteries, 5 hose and manual. 850-1100-00 - QC-100 Kit What s included: QC-100 instrument, belt pack, manual, 5 hose and 12 QCV vials (specify gas). Quick Check Vials (Gas Options) 525-0001-12 NH3 (Ammonia) 12 Pack 525-0002-12 HCl (Hydrogen Chloride) 12 Pack 525-0003-12 C7H8 (Toluene) 12 Pack 525-0004-12 C6H14 (Hexane) 12 Pack Accessories 730-0415-00 Hard body carrying case, Replacement Parts 715-0405-0X Hose, with quick connect, 5 730-1050-00 Nylon carrying case Specifications Useful Vial Life Up to 8+ hours per vial Warranty One year Dimensions (QC-100) 6.0 x 2.3 x 1.2 (15.2 x 5.8 x 3.0 cm) Dimensions (QCV) 0.4 x 1.3 (1.1 x 3.4 cm) Weight (QC-100) 8 oz (220 gm) Weight (QCV).14 oz (4 gm) Operating Temperature 5-50 C Relative Humidity (intermittent use) 0-100% Battery Power 2 Alkaline AA Battery Life 10 hours 23
Standard Warranty Gas Calibration Instruments We warrant gas calibration equipment manufactured and sold by us to be free from defects in materials, workmanship and performance for a period of one year from the date of shipment. Any parts found defective within that period will be repaired or replaced, at our option, free of charge, F.O.B. factory. This warranty does not apply to those items which by their nature are subject to deterioration or consumption in normal service, and which must be cleaned, repaired, or replaced on a routine basis. Such items may include: a. Electrochemical type generating sources b. Quick Check Vials (QCV) c. Batteries d. Fuses e. Air Filters All sources are warranteed for one year or the life of the source, whichever comes first. Warranty is voided by abuse including rough handling, mechanical damage, alteration or repair procedures not in accordance with the instruction manual. This warranty indicates the full extent of our liability, and we are not responsible for removal or replacement costs, local repair costs, transportation costs or contingent expenses incurred without our prior approval. Advanced Calibration Designs, Inc. s obligation under this warranty shall be limited to repairing or replacing, and returning any product which shall be returned to Advanced Calibration Designs, Inc. at its manufacturing facilities, with transportation charges prepaid, and which Advanced Calibration Designs, Inc. s Material Review Board examination shall disclose to its satisfaction to have been defective. This warranty is expressed in lieu of any and all other warranties and representations, expressed or implied, and all other obligations or liabilities on the part of Advanced Calibration Designs, Inc. including, but not limited to, the warranty of fitness for a particular purpose. In no event shall Advanced Calibration Designs, Inc. be liable for direct, incidental or consequential loss or damage of any kind connected with the use of its products or failure of its products to function or operate properly. 24
25
Advanced Calibration Designs 2024 W McMillan St Tucson AZ 85705 USA Phone: 520.290.2855 Toll Free: 800.737.0223 Fax: 520.290.2860 Web: goacd.com Email: acd@goacd.com