EVOSTONE MSDS COMPANY INFORMATION EVOSTONE Solid Surface - Material Safety Data Sheet (MSDS) Company Name: Evolution Hardware PTY LTD ABN: 34 616 479 611 Address: Phone: 03 6428 8309 Email: admin@evolutionhardware.com.au Composition / Information on Ingredients MMA - 12-15% Aluminia Trihydrate - 65% Unsaturation Polyester Resin - 20-23% EVOSTONE PROPERTIES Carcinogenetic information None of the present material in Evostone are known to be carcinogenetic equal to or greater than 0.1% are listed by the NTP. Hazard Identification Danger Identification None Special comments on danger for people and environment - None First Aid Measures Inhalation - If large amounts of dust are inhaled, or if exposed from overheating or combustion, move to fresh air. Skin Contact - No hazards which require special first aid measures. Fire-Fighting Measures Suitable extinguishing media - Specific hazards during firefighting - Water spray, Dry Chemical, Carbon Dioxide (C02), Foam Avoid generating dust; fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard. Hazardous combustion products Carbon monoxide Carbon. Accidental Release Measures Personal Precautions - Environmental precautions - Methods for cleaning up - No special precautions required. No special environmental precautions required. Dust Deposits should not be allowed to accumulate on surfaces, as these may form an explosive mixture if they are released into the atmosphere in sufficient concentration. Avoid dispersal of dust in the air (i.e., clearing dust surfaces with compressed air). Nonsparking tools should be used. PG 1/6.
EVOSTONE MSDS Handling and Storage Advice on safe handling - Requirements for storage - Do not breathe dust. Do not breathe vapours or fumes that may be evolved during processing. Wash hands before breaks and at the end of workday. Minimize dust generation and accumulation. Routine housekeeping should be instituted to ensure that dusts do no accumulate on surfaces. Dry powders can build static electricity charges when subjected to the friction of transfer and mixing operations. Provide adequate precautions, such as electrical grounding and boding, or inert atmospheres. No Special storage conditions required. Exposure Controls / Self Protection Engineering Measures - It is recommended that all dust control equipment such as local exhaust ventilation and material transport systems involved ion handling of this products contain explosion relief vents or an explosion suppression system or an oxygen deficient environment. Ensure that dust -handling systems (such as exhaust ducts, dust collectors, vessels, and processing equipment) are designed in a manner to prevent the escape of dust into a work are (i.e., there is no leakage from equipment). Use only appropriately classified electrical equipment and powered industrial trucks. Personal protective equipment - Respiratory protective equipment normally required. Dust safety masks are recommended when the dust concentration is more than 5 mg/m3. Physical and Chemical Properties Appearance - Solid Surface Hardness - 65 Strength - 13100MPa Stability and Reactivity The product is a very stable compound. Toxicological Information The product is non-toxic. Ecological Information The product is ecologically harmless. Disposal Considerations To be recycled / reversed. Small pieces can be disposed together with daily waste. PG 2/6.
EVOSTONE MSDS Transport Information Land transport - Not to be classified as hazardous goods Water transport - Not to be classified as hazardous goods Sea transport - Not to be classified as hazardous goods Air Transport Not to be classified as hazardous goods Other Information Above information is based on knowledge that we have so far, which should not be regarded as the guarantee for a specific product featured and should not establish a legally valid contractual relationship Weights of EVOSTONE 20mm 3600 x 610 72kg 3050 x 900 90kg 1000 x 900 30kg PG 3/6.
EVO REPAIR GLUE MSDS COMPANY INFORMATION EVO Repair Glue- Material Safety Data Sheet (MSDS) Company Name: Evolution Hardware PTY LTD ABN: 34 616 479 611 Address: Phone: 03 6428 8309 Email: admin@evolutionhardware.com.au Composition / Information on Ingredients MMA 90% Unsaturation Polyester Resin - 10% EVO REPAIR GLUE PROPERTIES Carcinogenetic information None of the present material in Evostone are known to be carcinogenetic equal to or greater than 0.1% are listed by the NTP. Hazard Identification Danger Identification - Inhalation; Skin contact; Eye contact; Ingestion Special Comments on Danger for People and Environment - Long-term inhalation of high concentrations may cause irritation to the respiratory system, causing nausea, drowsiness, dizziness, blurred vision, and headache. First Aid Measures Move the patient to fresh air, if breathing is difficult immediately apply artificial respiration to provide oxygen, if conditions do not improve, see a doctor immediately. Fire-Fighting Measures In case of fire, strong oxidants have a fire hazard Accidental Release Measures Clear all flammable and avoid exposure to hazardous concentrations of vapour, to guard against fire, clear liquid applications absorber, such as sand, soil or non-combustible material. Handling and Storage Storage in a dark place, away from heat, sparks, flames and other combustibles. For Long term storage use before best before date marked on tube. Once opened it is recommended the tube to be used and discarded. Exposure Controls / Self Protection PG 4/6
EVO REPAIR GLUE MSDS Wear rubber gloves Physical and Chemical Properties Appearance - Any colour is less than 250ml sealed containers, pastes PH Neutral Boiling point 200 ( C) Stability and Reactivity None reasonably foreseeable. Stable under normal conditions Toxicological Information Long term inhalation of high concentrations may irritate the respiratory system, boot from nausea, drowsiness, dizziness and blurred vision. Ecological Information The Product is ecologically harmless Disposal Considerations Comply with local governments, state and federal regulations on health and the environment, does not allow residual waste discharged into sewers or drains, waste treatment is not recommend by burial method, incineration is the most preferred method of treatment, or consult experts and institutions. Transport Information Packing group Sealed plastic tubes Packaging Sealed plastic tubes Transportation Precautions Avoid strong heat Curing Evo repair glue takes approximately 30 minutes to cure depending on room temperature. Higher room temperature will lower cure time. Other Information Above information is based on knowledge that we have so far, which should not be regarded as the guarantee for a specific product featured and should not establish a legally valid contractual relationship. PG 5/6.
DISCLAMER Under our policy of continuous product development, product specifications may change without notice. Prospective purchasers should therefore check with the retailer to ensure this publication correctly describes the products being offered for sale. All information supplied is to be used for general reference purposes only and is on the understanding that Evolution Hardware PTY LTD will not be liable for any loss, liability or damage of whatever kind arising as a result of any reliance upon such information. All pictures used in the guide are for illustrative purposes only. Evolution Hardware PTY LTD has presented this information in good faith to all their retailers and distributors to convey before any/all purchase/s. Information is supplied upon the condition that the person/s receiving the information will make their own determination as to its suitability for their purpose/s prior to use. In no event will Evolution Hardware PTY LTD be responsible for damages of any nature whatsoever resulting from the use of, or reliance upon, information from their website or the products to which the information refers. Australia 16 Burges Drive, Shearwater 7307 Tasmania Phone 03 6428 8309 Email admin@evolutionhardware.com.au Website ABN 34 616 479 611 PG 6/6.