SECTION 1: Identification 1.1. Identification Product form Product name Revision date: 03/16/2016 : Mixture : Product code : 2019-21526X 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture 1.3. Details of the supplier of the safety data sheet Softwash Systems 271 Specialty Point Sanford, FL 32771 T (855) 763-8669 1.4. Emergency telephone number Emergency number : (800) 535-5053 SECTION 2: Hazard(s) identification 2.1. Classification of the substance or mixture GHS-US classification Not classified 2.2. Label elements GHS-US labeling Hazard pictograms (GHS-US) : : Cleaners, liquids (all purpose cleaners, sanitary products, floor cleaners, glass cleaners, carpet cleaners, metal cleaners) Signal word (GHS-US) Hazard statements (GHS-US) Precautionary statements (GHS-US) : Danger GHS05 : H314 - Causes severe skin burns and eye damage : P260 - Do not breathe dust/mist/spray P264 - Wash hands and forearms thoroughly after handling P280 - Wear protective gloves/eye protection/face protection P301+P330+P331 - If swallowed: rinse mouth. Do NOT induce vomiting P303+P361+P353 - If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower P304+P340 - If inhaled: Remove person to fresh air and keep comfortable for breathing P305+P351+P338 - If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P310 - Immediately call a poison center/doctor P321 - Specific treatment (see First aid measures on this label) P363 - Wash contaminated clothing before reuse P405 - Store locked up P501 - Dispose of contents/container in accordance with local/regional/national/international regulations 2.3. Other hazards 2.4. Unknown acute toxicity (GHS US) Not applicable SECTION 3: Composition/Information on ingredients 3.1. Substance Not applicable 3.2. Mixture 04/19/2016 EN (English US) Page 1
This mixture does not contain any substances to be mentioned according to the criteria of section 3.2 of HazCom 2012 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). : Allow victim to breathe fresh air. Allow the victim to rest. : Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. : Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persist. : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/injuries : Not expected to present a significant hazard under anticipated conditions of normal use. 4.3. Indication of any immediate medical attention and special treatment needed SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand. Unsuitable extinguishing media : Do not use a heavy water stream. 5.2. Special hazards arising from the substance or mixture 5.3. Advice for firefighters Firefighting instructions Protection during firefighting : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment. : Do not enter fire area without proper protective equipment, including respiratory protection. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures 6.1.1. For non-emergency personnel Emergency procedures 6.1.2. For emergency responders Protective equipment Emergency procedures : Evacuate unnecessary personnel. : Equip cleanup crew with proper protection. : Ventilate area. 6.2. Environmental precautions Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters. 6.3. Methods and material for containment and cleaning up Methods for cleaning up 6.4. Reference to other sections See Heading 8. Exposure controls and personal protection. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling 7.2. Conditions for safe storage, including any incompatibilities Storage conditions Incompatible products Incompatible materials : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials. : Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapor. : Keep only in the original container in a cool, well ventilated place away from heat, hot surfaces, sparks, open flame and other ignition sources. No smoking. Keep container closed when not in use. : Strong bases. Strong acids. : Sources of ignition. Direct sunlight. 04/19/2016 EN (English US) 2/5
SECTION 8: Exposure controls/personal protection 8.1. Control parameters 8.2. Exposure controls Personal protective equipment : Avoid all unnecessary exposure. Hand protection Eye protection Respiratory protection : Wear protective gloves/eye protection/face protection protective gloves. : Chemical goggles or safety glasses. : Wear appropriate mask. : Do not eat, drink or smoke during use. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Appearance : Clear liquid. Color : Green Odor : Pleasant odour Odor threshold ph : 11 Melting point Freezing point Boiling point : 212-220 F Flash point : 200 F Relative evaporation rate (butyl acetate=1) Flammability (solid, gas) Explosion limits Explosive properties Oxidizing properties Vapor pressure Relative density : 1.03 Relative vapor density at 20 C : Same as water Solubility : Soluble in water. Log Pow Auto-ignition temperature Decomposition temperature Viscosity Viscosity, kinematic Viscosity, dynamic 9.2. SECTION 10: Stability and reactivity 10.1. Reactivity 10.2. Chemical stability Stable under normal conditions. 10.3. Possibility of hazardous reactions 10.4. Conditions to avoid Direct sunlight. Extremely high or low temperatures. 04/19/2016 EN (English US) 3/5
10.5. Incompatible materials Strong acids. Strong bases. 10.6. Hazardous decomposition products Fume. Carbon monoxide. Carbon dioxide. SECTION 11: Toxicological information 11.1. Information on toxicological effects Acute toxicity Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitization Germ cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity (single exposure) Specific target organ toxicity (repeated exposure) Aspiration hazard Potential Adverse human health effects and symptoms ph: 11 ph: 11 : Based on available data, the classification criteria are not met. SECTION 12: Ecological information 12.1. Toxicity 12.2. Persistence and degradability Persistence and degradability 12.3. Bioaccumulative potential Bioaccumulative potential 12.4. Mobility in soil 12.5. Other adverse effects : Avoid release to the environment. SECTION 13: Disposal considerations 13.1. Waste treatment methods Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Ecology - waste materials : Avoid release to the environment. SECTION 14: Transport information Department of Transportation (DOT) In accordance with DOT Not regulated for transport TDG 04/19/2016 EN (English US) 4/5
Transport by sea Air transport SECTION 15: Regulatory information 15.1. US Federal regulations 15.2. International regulations CANADA EU-Regulations National regulations 15.3. US State regulations SECTION 16: Revision date : 03/16/2016 : None. HMIS III Rating Health Flammability Physical Personal Protection : 2 Moderate Hazard - Temporary or minor injury may occur : 0 Minimal Hazard - Materials that will not burn : 1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high temperatures and pressures. Materials may react non-violently with water or undergo hazardous polymerization in the absence of inhibitors. : B B - Safety glasses, Gloves SDS US (GHS HazCom 2012) This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product 04/19/2016 EN (English US) 5/5