MATERIAL SAFETY DATA SHEET

Similar documents
Quebec Quebec Tel : Fax : MSDS: Ethyl Chloride PRODUCT INFORMATION

Hydrogen in Air % to 2%

Refrigerant R170 - ETHANE

INGREDIENT % VOLUME PEL-OSHA 1 TLV-ACGIH 2 LD 50 or LC 50 Route/Species Helium FORMULA: He CAS: RTECS #: MH

Quebec Quebec Tel : Fax : MSDS: Methane Compressed PRODUCT INFORMATION

Quebec Quebec Tel : Fax : MSDS: cis-2-butene PRODUCT INFORMATION

Mittler Supply Inc. MATERIAL SAFETY DATA SHEET- NITROUS OXIDE

Quebec Quebec Tel : Fax : MSDS: Hydrogen 25% in Nitrogen Mixture PRODUCT INFORMATION

Hydrogen in Air % to 2%

Quebec Quebec Tel : Fax : MSDS: Hydrogen Sulfide in Nitrogen Mixture PRODUCT INFORMATION

Quebec Quebec Tel : Fax : MSDS: Methane, Oxygen in Nitrogen Mixture PRODUCT INFORMATION

Quebec Quebec Tel : Fax : MSDS: Argon Compressed PRODUCT INFORMATION

INGREDIENT % VOLUME PEL-OSHA 1 TLV-ACGIH 2 LD 50 or LC 50 Route/Species Freon C-318 FORMULA: C 4 F 8 CAS: RTECS #: GU

PRODUCT INFORMATION HAZARDOUS INGREDIENTS PHYSICAL DATA. Tel: Fax: Internet:

Quebec Quebec Tel : Fax : MSDS: Sulfur Hexafluoride PRODUCT INFORMATION

Quebec Quebec Tel : Fax : MSDS: Propane Commercial Grade PRODUCT INFORMATION

PRODUCT INFORMATION HAZARDOUS INGREDIENTS PHYSICAL DATA. Tel: Fax: Internet:

Quebec Quebec Tel : Fax : MSDS: Halocarbon 12 PRODUCT INFORMATION

INGREDIENT % VOLUME PEL-OSHA 1 TLV-ACGIH 2 LD 50 or OC 50 Route/Species Hydrogen FORMULA: H 2 CAS: RTECS #: MW

Quebec Quebec Tel : Fax : MSDS: Isobutylene PRODUCT INFORMATION

MATERIAL SAFETY DATA SHEETS /E-3

Nitrous Oxide, % to 1.0% in Air

INGREDIENT % VOLUME PEL-OSHA 1 TLV-ACGIH 2 LD 50 or LC 50 Route/Species Trifluoromethane FORMULA: CHF3 CAS: RTECS #: PB

INGREDIENT % VOLUME PEL-OSHA 1 TLV-ACGIH 2 LD 50 or LC 50 Route/Species ppm TWA 25 ppm Ceiling

MATERIAL SAFETY DATA SHEET Product Name: Gas Mixture (CARBON MONOXIDE IN AIR) DOT ID No:

Compressed gases. Safety advice.

INGREDIENT % VOLUME PEL-OSHA 1 TLV-ACGIH 2 LD 50 or LC 50 Route/Species ppm TWA

INGREDIENT % VOLUME PEL-OSHA 1 TLV-ACGIH 2 LD 50 or LC 50 Route/Species Silicon Hexahydride FORMULA: Si 2H 6 CAS: RTECS #: Not Available

INGREDIENT % VOLUME PEL-OSHA 1 TLV-ACGIH 2 LD 50 or LC 50 Route/Species n-butane FORMULA: C 4H 10 CAS: RTECS #:EJ

MATERIAL SAFETY DATA SHEET

Compressed gases. Safety advice.

Quebec Quebec Tel : Fax : MSDS: Halocarbon 22 PRODUCT INFORMATION

1. PRODUCT IDENTIFICATION 2. COMPOSITION / INFORMATION ON HAZARDOUS INGREDIENTS

Quebec Quebec Tel : Fax : MSDS: Carbon Dioxide Oxygen Mixture (Carbogen) PRODUCT INFORMATION

Material Safety Data Sheet Taurine

MATERIAL SAFETY DATA SHEET - CALIBRATION CHECK GAS. MSDS NO: 86 Version:3 Date: January, 2000

Material Safety Data Sheet L-Phenylalanine

Pentane % to 0.75% in Air

Methane % to 3.0% in Air

Safety Data Sheet. Zero Air 1 PRODUCT AND COMPANY IDENTIFICATION. Manufacturer NorLab a division of Norco 898 W. Gowen Rd.

Material Safety Data Sheet Ferrous Ammonium Sulfate

Quebec Quebec Tel : Fax : MSDS: Cyanogen Chloride PRODUCT INFORMATION

Material Safety Data Sheet Magnesium stearate

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet alpha-benzoin oxime, 98%

Material Safety Data Sheet (REFRIGERANT R600a - ISOBUTANE)

MATERIAL SAFETY DATA SHEET

PRODUCT INFORMATION HAZARDOUS INGREDIENTS PHYSICAL DATA

Material Safety Data Sheet Zinc bromide

AMMONIA IN NITROGEN SYNONYMS: None

Material Safety Data Sheet Potassium formate (pract)

SIG SOUTHERN INDUSTRIAL GAS SDN BHD

HAZARDOUS INGREDIENTS

Material Safety Data Sheet Carbopol 940

Material Safety Data Sheet Phloxine B

MATERIAL SAFETY DATA SHEET

Quebec Quebec Tel : Fax : MSDS: Phosgene PRODUCT INFORMATION

MATERIAL SAFETY DATA SHEET PAGE 1

Material Safety Data Sheet Tungsten Metal Powder

MAPP Gas. Material Safety Data Sheet

Quebec Quebec Tel : Fax : MSDS: Dimethylamine PRODUCT INFORMATION

Intermountain Specialty Gases 520 North Kings Rd, Nampa, Idaho Phone: Fax:

Material Safety Data Sheet Aluminum phosphate, 99%

Material Safety Data Sheet Grams Iodine Solution. Section 1 - Chemical Product and Company Identification

Material Safety Data Sheet Zinc Metal Powder

Carbon Dioxide % to 30% in Nitrogen

Section 1 - Chemical Product and Company Identification. Company Identification: TissuePro Technology, 2153 SE Hawthorne Rd, Gainesville, FL 32641

Material Safety Data Sheet Polyacrylonitrile

MATERIAL SAFETY DATA SHEET

**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS

Material Safety Data Sheet Calcium sulfate, dihydrate

Material Safety Data Sheet

**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

Ammonium Bicarbonate **** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

Material Safety Data Sheet

Material Safety Data Sheet Magnesium Hydroxide

Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR

CAS# Chemical Name content EINECS# Remazol Brilliant Blue R

MATERIAL SAFETY DATA SHEET

The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.

Material Safety Data Sheet Potassium Iodate-Iodide, M - 0.1N. Section 1 - Chemical Product and Company Identification

Material Safety Data Sheet Calcium Iodide Hydrate, 98%

Material Safety Data Sheet Potassium Permanganate Solutions, 0.1N-.5N

Material Safety Data Sheet EDTA Titrant, 0.005M M, 5% w/v. Section 1 - Chemical Product and Company Identification

**** MATERIAL SAFETY DATA SHEET **** tert-butyl bromoacetate, 99% **** SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION ****

Material Safety Data Sheet Potassium nitrate MSDS# Section 1 - Chemical Product and Company Identification MSDS Name: Potassium nitrate Catalog

Material Safety Data Sheet Lanthanum Solution. Section 1 - Chemical Product and Company Identification

开原亨泰精细化工厂. Kaiyuan Hengtai Fine Chemicals Factory. Material Safety Data Sheet. L-Carnitine L-Tartrate

Material Safety Data Sheet Pyridine-Barbituric Acid Solution. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET

Quebec Quebec Tel : Fax : MSDS: Ethylene Oxide PRODUCT INFORMATION

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients

MATERIAL SAFETY DATA SHEET

Quebec Quebec Tel : Fax : MSDS: Chlorine PRODUCT INFORMATION

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR

Material Safety Data Sheet Acetyl Chloride

SAFETY DATA SHEET PRODUCT NAME Sulfur hexafluoride 1.2 RELEVANT IDENTIFIED USES OF THE SUBSTANCE OR MIXTURE AND USES ADVISED AGAINST :

INGREDIENT % VOLUME PEL-OSHA 1 TLV-ACGIH 2 LD 50 or LC 50 Route/Species Trichlorofluoromethane FORMULA: CCl 3F CAS: RTECS #: PB

Transcription:

MATERIAL SAFETY DATA SHEET ETHYL CHLORIDE Product Name: Chemical Name: Common Names/Synonyms: Ethyl Chloride Chloroethane Monochloroethane, Chlorene, Chloroethyl Company Identification: (INDIA) Veritas House, 70 Mint Road, Fort, Mumbai - 400 001. INDIA For information in the INDIA, call: Tel: +91-22 - 2275 5555 / 6184 0000, Fax: +91-22 - 2275 5556 / 6184 0001 1. Composition, Information on Ingredients INGREDIENT CHLOROETHANE FORMULA: C2H5CL CAS: 75-00-3 % VOLUME >99.7 PEL-OSHA1 1000 PPM TLV-ACGIH2 TWA 100 PPM LD50 OR LC50 TWA LC50 160 GM/M3/2H ROUTE/SPECIES (RAT) 2. Hazards Identification EMERGENCY OVERVIEW Route Of Entry: Skin Contact Skin Absorption Eye Contact Inhalation Ingestion Slight irritant to eyes and mucous embranes. Anesthetic or narcotic effect at high concentrations. Extremely flammable.

HEALTH EFFECTS: Exposure Limits Irritant Sensitization Teratogen Reproductive Hazard Mutagen Synergistic Effects Carcinogenicity: Ntp: Iarc: Osha: Other Agents That Depress The Central Nervous System Eye effects Skin effects Ingestion effects Inhalation effects Ethyl chloride is a slight irritant to the mucosal tissues and eyes Slight irritant to the skin and mucosal tissues. ne known. Ingestion is unlikely Inhalation at concentrations of approximately 2% (molar) has an anesthetic or narcotic effect causing headache dizziness, and possibly nausea. At higher concentrations it can cause unconsciousness. Prolonged exposure to high concentrations has resulted in death 3. First aid measures Eyes Skin Ingestion Inhalation Flush eyes immediately with lukewarm water for at least 15 minutes. A physician should see the patient promptly Remove contaminated clothing and flush affected areas with lukewarm water. Do not use hot water!! ne required Prompt medical attention is mandatory in all cases of overexposure. Rescue personnel should be equipped with self-contained breathing apparatus and be cognizant of extreme fire and explosion hazard. Conscious persons should be assisted to an uncontaminated area and inhale fresh air. Quick removal from the contaminated area is most important. Unconscious persons should be moved to an uncontaminated area and given artificial resuscitation and supplemental oxygen. Medical assistance should be sought immediately. Further treatment should be symptomatic and supportive. The physician should be instructed not to use adrenaline as a stimulant in cases of ethyl chloride poisoning.

4. Fire Fighting Measures Conditions Of Flammability Flash Point Autoignition Temperature Hazardous Combustion Products Sensitivity To Mechanical Shock Sensitivity To Static Discharge Fire And Explosion Hazards Extinguishing Media Fire Fighting Instructions FLAMMABLE IN AIR (-) 50 DEG CEL 519 DEG CEL LEL(%): 3.8 UEL(%): 15.4 PHOSGENE AND HYDROGEN CHLORIDE NONE NOT AVAILABLE Flammable over a wide range of concentrations in air. Forms explosive mixtures in air. If flame is extinguished and flow of gas continues, increase ventilation to prevent explosive mixture formation in low areas or pockets. Carbon dioxide or dry chemical. Fire fighters should use self-contained breathing apparatus to protect them from toxic combustion products. If possible, stop the flow of gas and allow fuel to consume itself. Use water spray to cool adjacent areas. 5. Accidental Release Measures Evacuate all personnel from affected area. Use appropriate protective equipment. If leak is in user s equipment, be certain to purge piping with inert gas prior to attempting repairs. If leak is in container or container valve. 6. Handling And Storage Dry ethyl chloride can be handled in most common materials of construction. Gasketing materials should be teflon, buna s, or buna n. Do not use pvc, polypropylene, hypalon, natural or butyl rubber. Use only in well-ventilated areas. Valve protection caps must remain in place unless container is secured with valve outlet piped to use point. Do not drag, slide or roll cylinders. Use a suitable hand truck for cylinder movement. Use a pressure reducing regulator when connecting cylinder to lower pressure (<300 psig) piping or systems. Do not heat cylinder by any means to increase the discharge rate of product from the cylinder. Protect containers from physical damage. Store in cool, dry, well-ventilated area away from heavily trafficked areas and emergency exits. Do not allow the temperature where containers are stored to exceed 130of (54oc). Containers should be stored upright and firmly secured to prevent falling or being knocked over. Full and empty containers should be segregated. Use a "first in-first out" inventory system to prevent full containers being stored for excessive periods of time. Post "no smoking or open flames" signs in the storage or use area. There should be no sources of ignition in the storage or use area. Never carry a compressed gas cylinder or a container of a gas in cryogenic liquid form in an enclosed space such as a car trunk, van or station wagon. A leak can result in a fire, explosion, asphyxiation or a toxic exposure.

7. Exposure Controls, Personal Protection EXPOSURE LIMITS: INGREDIENT CHLOROETHANE FORMULA: C2H5CL CAS: 75-00-3 % VOLUME >99.7 ENGINEERING CONTROLS: Hood with forced ventilation. Use local exhaust to prevent accumulation above the exposure limit. Eye/Face Protection Safety goggles or glasses Skin Protection Protective gloves: teflon, or kel-f. Do not use pvc, natural rubber, butyl rubber or polypropylene. Respiratory Protection Positive pressure air line with mask & escape bottle or selfcontained breathing apparatus should be available for emergency use. Other General Protection Safety shoes, safety shower, eyewash "fountain", faceshield 8. Physical and Chemical Properties Physical State Vapor Pressure Vapor Density (Air = 1) Evaporation Point Boiling Point Freezing Point Solubility (H20) Odor And Appearance 9. Stability and Reactivity Stability: Incompatible Materials: Hazardous Decomposition Products: Hazardous Polymerization: 10. Toxicological Information Reproductive: Mutagenic: Tumorigenic: Other: GAS (AT ROOM TEMP.) 20.3 PSIA 2.22 (STP) NOT AVAILABLE 12.2 DEG CEL -139 DEG CEL SLIGHTLY SOLUBLE Colorless Gas With Pungent Ethereal Odor Stable When Dry, It Is n-reactive With Most Commonly Used Materials. Thermal Decomposition Yields Phosgene And Hydrogen Chloride Will t Occur. Toxic effects to spermatogenesis observed in experimental rats exposed for 4 hours at 60 mg/m3. Mutations seen on s. Typhimurium screening test. Inhalation exposure produced tumors in experimental rats and mice after 6 hour exposure at 15,000 ppm. Changes in liver and body weight observed in experimental rats and mice following

inhalation. 11. Disposal Considerations Do not attempt to dispose of residual waste or unused quantities. Return in the shipping container properly labeled, with any valve outlet plugs or caps secured and valve protection cap in place to BOC gases or authorized distributor for proper disposal. 12. Transport Information Proper Shipping Name: ETHYL CHLORIDE Hazard Class: 2.1 Identification Number: UN 1037 Shipping Label: FLAMMABLE GAS 13. Regulatory Information Ethyl Chloride is listed under the accident prevention provisions of section 112(R) of the clean air act (CAA) with a threshold quantity (TG) of 10,000 pounds. 14. Other Information Compressed gas cylinders shall not be refilled without the express written permission of the owner. Shipment of a compressed gas cylinder which has not been filled by the owner or with his/her (written) consent is a violation of transportation regulations. MSDS Creation Date: July 22, 2015 Revision #0 Date The Information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall the company be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential, or exemplary damages howsoever arising, even if the company has been advised of the possibility of such damages.