Turbo Blowers Features Integral molded scroll design Turbine bladed impeller Steel inlet guard Precisely balanced impellers eliminate vibration Complete line of available accessories for adapting to any piping condition or operational requirement More abrasion resistant than steel blower housing Benefits Efficiencies of up to 50% over conventional blowers Meets air volume and pressure requirements with smaller horsepower Reduced power consumption Easily rotated to any of 14 available positions The Hauck direct drive Turbo Blower is available in six pressure ranges from 12 36 osig (5.2 15.5 kpa) and 63 different sizes ranging from 240 to 13,000 scfm (6.4 348 nm 3 /min) for providing large or small volumes of air at constant pressures. The Turbo Blower is designed to supply air for combustion or for any low pressure air application. Corrosion resistant for longer life Combustion Excellence Since 1888
CAPACITIES Pressure Range (OSI) 12 16 20 24 32 36 Catalog Number SCFM 1.0 S.F. Motor Rating (TEFC) 1.15 S.F. Motor Rating (ODP) SCFH Total Pressure (OSIG) BHP SCFM SCFH Total Pressure (OSIG) TBA-12-1.5 2 40 1 4,400 12.0 1.5 3 05 1 8,300 11.4 1.8 TBA-12-2 3 10 1 8,600 12.6 2 4 40 2 6,400 11.6 2.4 TBA-12-3 5 00 3 0,000 1 2.7 3 - - - - TBA-12-5 1,0 80 6 4,800 12.4 5 1,2 80 7 6,800 11.7 5.7 5 TBA-12-7.5 1,6 00 9 6,000 1 2.4 7.5 2,0 40 1 22,400 1 1.5 8.6 TBA-12-1 0 2,2 00 1 32,000 1 2.5 1 0 2,7 40 1 64,400 1 0.8 1 1.5 TBA-12-1 5 3,0 50 1 83,000 12.6 15 3,7 50 2 25,000 11.9 1 7.25 TBA-12-2 0 4,5 50 2 73,000 1 2.1 2 0 5,1 40 3 08,400 1 1.7 2 3 TBA-12-2 5 5,0 50 3 03,000 1 2.1 2 5 5,7 75 3 46,500 1 1.0 2 8.75 TBA-12-3 0 5,7 75 3 46,500 12.0 30 6.5 75 3 94,500 11.0 34.5 TBA-16-3 3 80 2 2,800 1 6.5 3 - - - - TBA-16-5 7 40 4 4,400 1 6.0 5 9 00 5 4,000 1 5.2 5.7 5 TBA-16-7.5 1,2 20 7 3,200 16.5 7.5 1,4 60 8 7,600 15.6 8.6 TBA-16-1 0 1,6 20 9 7,200 1 6.6 1 0 1,9 20 1 15,200 1 5.5 1 1.5 TBA-16-1 5 2,5 00 1 50,000 1 6.7 1 5 3,0 50 1 83,000 1 5.5 1 7.25 TBA-16-2 0 3,2 50 1 95,000 16.7 20 3,7 50 2 25,000 15.0 23 TBA-16-2 5 3,8 50 2 31,000 1 6.5 2 5 4,7 00 2 82,000 1 5.7 2 8.75 TBA-16-3 0 4,6 00 2 76,000 1 6.3 3 0 5,6 00 3 36,000 1 5.0 3 4.5 TBA-16-4 0 6,9 00 4 14,000 16.7 40 7,9 50 4 47,000 15.3 46 TBA-20-5 4 50 2 7,000 2 0.0 5 5 50 3 3,000 1 9.5 5.7 5 TBA-20-7.5 8 50 5 1,000 2 0.0 7.5 1,0 40 6 2,400 1 8.9 8.6 TBA-20-1 0 1,2 00 7 2,000 20.0 10 1,4 70 8 8,200 18.2 11.5 TBA-20-1 5 2,1 00 1 26,000 2 0.8 1 5 2,5 00 1 50,000 1 9.4 1 7.25 TBA-20-2 0 2,6 50 1 59,000 2 0.9 2 0 3,1 25 1 87,500 2 0.0 2 3 TBA-20-2 5 3,3 80 2 02,800 20.8 25 3,9 75 2 38,500 19.5 2 8.75 TBA-20-3 0 3,8 50 2 31,000 2 0.8 3 0 4,5 50 2 73,000 1 9.7 3 4.5 TBA-20-4 0 5,0 00 3 00,000 2 0.8 4 0 5,6 50 3 39,000 1 9.5 4 4 TBA-20-5 0 6,6 20 3 97,200 19.5 50 7,8 50 4 71,000 17.8 57.5 TBA-20-6 0 7,7 00 4 62,000 1 9.5 6 0 9,1 50 5 49,000 1 7.0 6 9 TBA-24-5 2 35 1 4,100 2 2.8 5 3 50 2 1,000 2 3.4 5.7 5 TBA-24-7.5 6 00 3 6,000 23.5 7.5 7 60 4 5,600 22.8 8.6 TBA-24-1 0 1,0 00 6 0,000 2 4.0 1 0 1,2 00 7 2,000 2 3.7 1 1.5 TBA-24-1 5 1,5 50 9 3,000 2 4.0 1 5 1,8 00 1 08,000 2 2.1 1 6.5 TBA-24-2 0 2,3 50 1 41,000 24.9 20 2,7 60 1 65,600 23.9 23 TBA-24-2 5 2,8 75 1 72,500 2 5.0 2 5 3,4 00 2 04,000 2 3.5 2 8.75 TBA-24-3 0 3,3 50 2 01,000 2 5.8 3 0 3,9 25 2 35,500 2 5.1 3 4.5 TBA-24-4 0 4,3 50 2 61,000 25.5 40 5,0 00 3 00,000 24.0 46 TBA-24-5 0 5,6 00 3 36,000 2 5.4 5 0 6,6 50 3 99,000 2 4.0 5 7.5 TBA-24-6 0 6,5 00 3 90,000 2 4.8 6 0 7,7 00 4 62,000 2 3.0 6 9 TBA-32-7.5 4 60 2 7,600 32.6 7.5 5 70 3 4,200 32.0 8.6 TBA-32-1 0 6 25 3 7,500 3 2.3 1 0 7 60 4 5,600 2 9.5 1 1.5 TBA-32-1 5 8 70 5 2,200 3 2.9 1 5 1,0 50 6 3,000 2 7.9 1 7.25 TBA-32-2 0 1,1 00 6 6,000 32.3 20 1,3 10 7 8,600 27.0 23 TBA-32-2 5 2,1 80 1 30,800 3 2.6 2 5 2,5 10 1 50,600 3 1.6 2 8.75 TBA-32-3 0 2,6 20 1 57,200 3 3.1 3 0 3,1 00 1 86,000 3 1.5 3 4.5 TBA-32-4 0 3,5 40 2 12,400 32.9 40 4,1 40 2 48,400 30.6 46 TBA-32-5 0 4,3 00 2 58,000 3 1.6 5 0 5,0 50 3 03,000 2 7.6 5 7.5 TBA-32-6 0 4,7 50 2 85,000 3 4.5 6 0 5,6 00 3 36,000 2 9.9 6 9 TBA-32-7 5 6,0 50 3 63,000 32.2 75 7,0 50 4 24,200 29.8 8 6.25 TBA-32-1 00 8,3 50 5 01,000 3 1.9 1 00 1 0,000 6 00,000 3 0.2 1 15 TBA-32-1 25 1 0,300 6 18,000 3 1.8 1 25 1 1,700 6 72,000 3 1.1 1 43.75 TBA-32-1 50 1 2,050 7 23,000 32.5 1 50 1 4,200 8 52,000 30.2 1 72.5 TBA-36-1 0 5 50 3 3,000 3 6.1 1 0 6 75 4 0,500 3 5.4 1 1.5 TBA-36-1 5 8 50 5 1,000 3 5.8 1 5 1,0 10 6 0,600 3 1.9 1 7.25 TBA-36-2 0 1,0 35 6 2,100 36.6 20 1,2 50 7 5,000 30.7 23 TBA-36-2 5 1,9 40 1 16,400 3 5.8 2 5 2,3 60 1 41,000 3 4.9 2 8.75 TBA-36-3 0 2,3 80 1 42,800 3 6.4 3 0 2,8 20 1 69,200 3 5.4 3 4.5 TBA-36-4 0 3,3 00 1 98,000 35.7 40 3,8 75 2 32,500 33.9 46 TBA-36-5 0 3,9 50 2 37,000 3 6.4 5 0 4,6 50 2 79,000 3 3.9 5 7.5 TBA-36-6 0 4,6 00 2 76,000 3 6.7 6 0 5,4 25 3 25,500 3 3.2 6 9 TBA-36-7 5 5,6 50 3 39,000 36.6 75 6,6 00 3 96,000 35.1 8 6.25 TBA-36-1 00 7,2 75 4 36,500 3 5.8 1 00 8,1 25 4 87,500 3 4.1 1 15 TBA-36-1 25 8,5 00 5 10,000 4 0.2 1 25 1 0,800 6 48,000 3 8.3 1 43.75 TBA-36-1 50 1 1,500 6 90,000 37.2 1 50 1 4,500 8 70,000 32.6 1 72.5 BHP NOTE: 1. Capacities at 29.92 Hg inlet pressure and 70ºF inlet temperature. 2. All motors 60 Hz, 3600 rpm., standard shaft.
DIMENSIONAL DATA Pressure Range (OSIG) 12 16 20 24 32 36 Catalog Number Volume (CFM) HP 1.00 S.F. 1.15 S.F. TEFC Motor Frame Dimensions (Inches) ODP A B B+ C D E F TBA-12-1.5 2 40 3 05 1.5 1 43T 1 43T 12 ⅞ 22 22 13 15 ⅞ 17 16 ¼ TBA-12-2 3 10 4 40 2 1 45T 1 45T 17 22 22 13 ⅜ 20 17 16 ¼ TBA-12-3 5 00-3 1 82T - 1 7-2 3 1 3 ⅜ 20 17 16 ¼ TBA-12-5 1,0 80 1,2 80 5 1 84T 1 82T 18 23 23 15 ¼ 21 17 16 ¼ TBA-12-7.5 1,6 00 2,0 40 7.5 2 13T 1 84T 2 0 ¼ 2 3 2 3 ¾ 1 6 ⅜ 23 ¼ 17 16 ⅝ TBA-12-1 0 2,2 00 2,7 40 1 0 2 15T 2 13T 2 0 ¼ 2 3 ¾ 2 3 ¾ 1 6 ⅜ 23 ¼ 17 16 ⅝ TBA-12-1 5 3,0 50 3,7 50 15 2 54T 2 15T 20 ½ 25 ¼ 26 ¼ 17 ¼ 23 ½ 21 23 ⅛ TBA-12-20 4,550 5,140 20 256T 254T 20 ½ 26 ¼ 26 ¼ 17 ¼ 23 ½ 21 23 ⅛ TBA-12-25* 5,050 5,775 25 284TS 256T 20 ½ 26 ¼ 27 17 ¼ 23 ½ 21 24 TBA-12-3 0* 5,7 75 6.5 75 30 2 86TS 2 84TS 20 ½ 27 27 17 ¼ 23 ½ 21 24 TBA-16-3 3 80-3 1 82T - 1 2 ⅞ - 23 13 15 ⅞ 17 16 ¼ TBA-16-5 7 40 9 00 5 1 84T 1 82T 1 7 2 3 2 3 1 3 ⅜ 20 17 16 ¼ TBA-16-7.5 1,2 20 1,4 60 7.5 2 13T 1 84T 18 23 23 ¾ 15 ¼ 21 17 16 ¼ TBA-16-10 1,620 1,920 10 215T 213T 18 23 ¾ 23 ¾ 15 ¼ 21 17 16 ¼ TBA-16-1 5 2,5 00 3,0 50 1 5 2 54T 2 15T 2 0 ¼ 2 5 ¼ 2 6 ¼ 1 6 ⅜ 23 ¼ 21 22 ⅞ TBA-16-2 0 3,2 50 3,7 50 20 2 56T 2 54T 20 ¼ 26 ¼ 26 ¼ 16 ⅜ 23 ¼ 21 22 ⅞ TBA-16-25 3,850 4,700 25 284TS 256T 20 ½ 26 ¼ 27 17 ¼ 23 ½ 21 23 ⅛ TBA-16-30 4,600 5,600 30 286TS 284TS 20 ½ 27 27 17 ¼ 23 ½ 21 23 ⅛ TBA-16-4 0* 6,9 00 7,9 50 40 3 24TS 2 86TS 20 ½ 27 28 17 ¼ 23 ½ 21 24 TBA-20-5 4 50 5 50 5 1 84T 1 82T 1 8 2 3 2 3 1 5 ⅝ 21 17 16 ¼ TBA-20-7.5 8 50 1,0 40 7.5 2 13T 1 84T 2 0 2 3 2 3 ¾ 1 6 ¼ 2 3 1 7 1 6 ¼ TBA-20-1 0 1,2 00 1,4 70 10 2 15T 2 13T 20 23 ¾ 23 ¾ 16 ¼ 23 17 16 ¼ TBA-20-15 2,100 2,500 15 254T 215T 22 ¾ 25 ¼ 26 ¼ 18 ¼ 25 ¾ 21 22 ⅝ TBA-20-20 2,650 3,125 20 256T 254T 20 ¼ 26 ¼ 26 ¼ 19 23 ¼ 21 22 ⅞ TBA-20-2 5 3,3 80 3,9 75 25 2 84TS 2 56T 20 ¼ 26 ¼ 27 19 23 ¼ 21 22 ⅞ TBA-20-3 0 3,8 50 4,5 50 3 0 2 86TS 2 84TS 2 0 ¼ 2 8 ½ 2 8 ½ 1 9 ⅞ 23 ¼ 22 ½ 25 ⅞ TBA-20-4 0 5,0 00 5,6 50 4 0 3 24TS 2 86TS 2 0 ¼ 2 8 ½ 2 9 ½ 1 9 ⅞ 23 ¼ 22 ½ 25 ⅞ TBA-20-5 0 6,6 20 7,8 50 50 3 26TS 3 24TS 20 ¼ 29 ½ 29 ½ 19 ⅞ 23 ¼ 22 ½ 25 ¾ TBA-20-6 0 7,7 00 9,1 50 6 0 3 64TS 3 26TS 2 0 ¼ 2 9 ½ 3 0 ½ 1 9 ⅞ 23 ¼ 22 ½ 25 ¾ TBA-24-5 2 35 3 50 5 1 84T 1 82T 1 8 2 3 2 3 1 5 ⅝ 21 17 16 ¼ TBA-24-7.5 6 00 7 60 7.5 2 13T 1 84T 18 23 23 ¾ 15 ⅝ 21 17 16 ¼ TBA-24-10 1,000 1,200 10 215T 213T 20 23 ¾ 23 ¾ 16 ¼ 23 17 16 ¼ TBA-24-15 1,550 1,800 15 254T 215T 20 25 ¼ 26 ¼ 16 ¼ 23 21 22 ½ TBA-24-2 0 2,3 50 2,7 60 20 2 56T 2 54T 22 ¾ 26 ¼ 26 ¼ 18 ¼ 25 ¾ 21 22 ⅝ TBA-24-25 2,875 3,400 25 284TS 256T 22 ¾ 26 ¼ 27 18 ¼ 25 ¾ 21 22 ⅝ TBA-24-30 3,350 3,925 30 286TS 284TS 20 ¼ 27 27 19 23 ¼ 21 22 ⅞ TBA-24-4 0 4,3 50 5,0 00 40 3 24TS 2 86TS 20 ¼ 27 28 19 23 ¼ 21 22 ⅞ TBA-24-5 0 5,6 00 6,6 50 5 0 3 26TS 3 24TS 2 0 ¼ 2 9 ½ 2 9 ½ 1 9 ⅞ 23 ¼ 22 ½ 25 ⅞ TBA-24-6 0 6,5 00 7,7 00 6 0 3 64TS 3 26TS 2 0 ¼ 2 9 ½ 3 0 ½ 1 9 ⅞ 23 ¼ 22 ½ 25 ⅞ TBA-32-7.5 4 60 5 70 7.5 2 13T 1 84T 19 28 ⅛ 28 ⅞ 19 21 ½ 27 ⅛ 18 1/ 16 TBA-32-1 0 6 25 7 60 1 0 2 15T 2 13T 1 9 2 8 ⅞ 28 ⅞ 19 21 ½ 27 ⅛ 18 1/ 16 TBA-32-1 5 8 70 1,0 50 1 5 2 54T 2 15T 1 9 3 1 9/ 16 32 9/ 16 19 21 ½ 27 ⅛ 23 15/ 16 TBA-32-2 0 1,1 00 1,3 10 20 2 56T 2 54T 19 32 9/ 16 32 9/ 16 19 21 ½ 27 ⅛ 23 15/ 16 TBA-32-2 5 2,1 80 2,5 10 2 5 2 84TS 2 56T 2 1 ⅞ 32 9/ 16 33 5/ 16 22 ⅛ 24 ⅜ 27 ⅛ 23 15/ 16 TBA-32-3 0 2,6 20 3,1 00 3 0 2 86TS 2 84TS 2 1 ⅞ 33 5/ 16 33 5/ 16 22 ⅛ 24 ⅜ 27 ⅛ 23 15/ 16 TBA-32-4 0 3,5 40 4,1 40 40 3 24TS 2 86TS 24 33 5/ 16 34 5/ 16 22 ⅝ 26 ½ 27 ⅛ 24 ⅛ TBA-32-5 0 4,3 00 5,0 50 5 0 3 26TS 3 24TS 2 4 3 6 ⅜ 36 ⅜ 22 ⅝ 26 ½ 27 ⅛ 29 ¾ TBA-32-6 0 4,7 50 5,6 00 6 0 3 64TS 3 26TS 2 4 3 6 ⅜ 37 ⅜ 22 ⅝ 26 ½ 27 ⅛ 29 ¾ TBA-32-7 5 6,0 50 7,0 50 75 3 65TS 3 64TS 23 ⅛ 37 ⅜ 37 ⅜ 23 5/ 16 25 ⅝ 27 ⅛ 29 ⅞ TBA-32-1 00 8,3 50 1 0,000 1 00 4 05TS 3 65TS 2 5 3 8 3 9 2 4 ½ 2 7 2 8 ⅜ 35 ⅞ TBA-32-1 25 1 0,300 1 1,700 1 25 4 44TS 4 04TS 2 5 3 9 4 0 2 4 ½ 2 7 2 8 ⅜ 35 ⅞ TBA-32-1 50 1 2,050 1 4,200 1 50 4 45TS 4 05TS 25 39 40 24 ½ 27 28 ⅜ 35 ⅞ TBA-36-1 0 5 50 6 75 1 0 2 15T 2 13T 1 9 2 8 ⅞ 28 ⅞ 19 21 ½ 27 ⅛ 18 1/ 16 TBA-36-1 5 8 50 1,0 10 1 5 2 54T 2 15T 1 9 3 1 9/ 16 32 9/ 16 19 21 ½ 27 ⅛ 23 15/ 16 TBA-36-2 0 1,0 35 1,2 50 20 2 56T 2 54T 19 32 9/ 16 32 9/ 16 19 21 ½ 27 ⅛ 23 15/ 16 TBA-36-2 5 1,9 40 2,3 60 2 5 2 84TS 2 56T 2 1 ⅞ 32 9/ 16 33 5/ 16 22 ⅛ 24 ⅜ 27 ⅛ 23 15/ 16 TBA-36-3 0 2,3 80 2,8 20 3 0 2 86TS 2 84TS 2 1 ⅞ 33 5/ 16 33 5/ 16 22 ⅛ 24 ⅜ 27 ⅛ 23 15/ 16 TBA-36-4 0 3,3 00 3,8 75 40 3 24TS 2 86TS 24 33 5/ 16 34 5/ 16 22 ⅝ 26 ½ 27 ⅛ 24 ⅛ TBA-36-5 0 3,9 50 4,6 50 5 0 3 26TS 3 24TS 2 4 3 6 ⅜ 36 ⅜ 22 ⅝ 26 ½ 27 ⅛ 29 ¾ TBA-36-6 0 4,6 00 5,4 25 6 0 3 64TS 3 26TS 2 4 3 6 ⅜ 37 ⅜ 22 ⅝ 26 ½ 27 ⅛ 29 ¾ TBA-36-7 5 5,6 50 6,6 00 75 3 65TS 3 64TS 23 ⅛ 37 ⅜ 37 ⅜ 23 5/ 16 25 ⅝ 27 ⅛ 29 ⅞ TBA-36-1 00 7,2 75 8,1 25 1 00 4 05TS 3 65TS 2 3 ⅛ 38 39 23 5/ 16 25 ⅝ 28 ⅜ 35 ⅛ TBA-36-1 25 8,5 00 1 0,800 1 25 4 44TS 4 04TS 2 5 3 9 4 0 2 4 ½ 2 7 2 8 ⅜ 35 ⅞ TBA-36-1 50 1 1,500 1 4,500 1 50 4 45TS 4 05TS 25 39 40 24 ½ 27 28 ⅜ 35 ⅞ NOTE: + Indicates TEFC motor *TBA-12-25, TBA-12-30, and TBA-16-40 available with CL O CKWISE (CW) discharge positions only. Do not use for construction purposes. Certified dimensions available at time of order.
Dimensions (Inches) Approx. Net Weight (LB.) G H J K K+ L M N O P R S T U V ODP TEFC 2 11 15 13 13 ⅜ 19 ½ 3 1 ¼ 8 14 8 ¼ 4 ¼ 15 14 ½ 16 ⅛ 2 10 2 10 2 11 15 13 ½ 13 ⅞ 1 9 ½ 3 1 ¼ 8 14 ¾ 8 ¼ 6 ¼ 1 5 ⅞ 15 ⅜ 17 ⅞ 2 20 2 20 2 11 15-14 ⅝ 1 9 ½ 3 1 ¼ 8 14 ¾ 8 ¼ 6 ¼ 1 5 ⅞ 15 ⅝ 17 ⅞ - 2 55 2 11 15 13 ¼ 15 ¾ 19 ½ 3 ¾ 1 ¼ 10 16 ⅝ 10 ¼ 8 ¼ 18 ⅜ 17 ⅝ 20 ¾ 2 65 2 80 2 11 15 14 17 ⅞ 19 ½ 4 ⅞ 1 ⅝ 12 17 ½ 12 ¼ 10 ¼ 20 19 23 235 350 2 11 15 15 ¾ 19 ¼ 19 ½ 4 ⅞ 1 ⅝ 12 17 ½ 12 ¼ 10 ¼ 20 19 23 385 365 2 ⅛ 17 21 ¼ 17 ½ 23 ¼ 23 ½ 5 ¾ 1 ⅞ 14 18 ⅜ 14 ¼ 12 ¼ 21 ⅝ 20 ⅛ 25 4 30 5 15 2 ⅛ 17 21 ¼ 21 ⅛ 25 ⅛ 2 3 ½ 5 ¾ 1 ⅞ 14 18 ½ 14 ¼ 12 ¼ 21 ⅝ 20 ⅛ 25 2 ⅛ 17 21 ¼ 23 ⅛ 2 5 ¼ 2 3 ½ 6 ½ 2 ⅝ 14 18 ½ 14 ¼ 14 ¼ 21 ⅝ 20 ⅛ 25 2 ⅛ 17 21 ¼ 22 ¾ 26 ¾ 23 ½ 6 ½ 2 ⅝ 14 18 ½ 14 ¼ 14 ¼ 21 ⅝ 20 ⅛ 25 2 11 15-14 ⅝ 1 9 ½ 3 1 ¼ 8 1 4 8 ¼ 4 ¼ 1 5 1 4 ½ 1 6 ⅛ 2 55 2 11 15 13 ⅛ 15 ⅝ 1 9 ½ 3 1 ¼ 8 1 4 ¾ 8 ¼ 6 ¼ 1 5 ⅞ 15 ⅜ 17 ⅞ 2 50 2 70 2 11 15 14 ¼ 18 ⅛ 19 ½ 3 ¾ 1 ¼ 10 16 ⅝ 10 ¼ 8 ¼ 18 ⅜ 17 ⅝ 20 ¾ 2 75 3 40 2 11 15 16 ⅛ 19 ⅝ 1 9 ½ 3 ¾ 1 ¼ 1 0 1 6 ⅝ 1 0 ¼ 8 ¼ 1 8 ⅜ 17 ⅝ 2 0 ¾ 3 25 3 55 2 ⅛ 17 21 ¼ 17 ¼ 23 23 ½ 4 ⅞ 1 ⅝ 12 17 ½ 12 ¼ 10 ¼ 20 19 23 415 500 2 ½ 17 21 ¼ 20 ⅝ 24 ¾ 23 ½ 4 ⅞ 1 ⅝ 12 17 ½ 12 ¼ 10 ¼ 20 19 23 4 90 5 20 2 ½ 17 21 ¼ 22 ⅝ 24 ⅞ 2 3 ½ 5 ¾ 1 ⅞ 14 18 ⅜ 14 ¼ 12 ¼ 21 ⅝ 20 ⅛ 2 5 5 25 6 40 2 ⅛ 17 21 ¼ 22 ⅜ 26 ⅜ 2 3 ½ 5 ¾ 1 ⅞ 14 18 ⅜ 14 ¼ 12 ¼ 21 ⅝ 20 ⅛ 2 5 6 15 6 75 2 ⅛ 17 21 ¼ 23 ¼ 27 ¼ 23 ½ 6 ⅝ 2 ¾ 14 18 ⅜ 14 ¼ 14 ¼ 21 ⅝ 20 ⅛ 25 2 11 15 13 15 ⅝ 19 ½ 3 1 ¼ 10 17 ⅛ 1 0 ¼ 6 ¼ 1 8 ⅛ 17 ⅝ 20 ⅛ 2 70 2 85 2 11 15 14 ⅛ 1 8 1 9 ½ 3 ¾ 1 ¼ 1 2 1 7 ½ 1 2 ¼ 8 ¼ 1 9 ⅛ 18 ½ 21 ¾ 235 350 2 11 15 16 19 ½ 19 ½ 3 ¾ 1 ¼ 12 17 ½ 12 ¼ 8 ¼ 19 ⅛ 18 ½ 21 ¾ 3 35 3 85 2 ⅛ 17 21 ¼ 17 ⅝ 23 ¼ 23 ½ 4 ⅜ 1 ⅜ 12 19 ½ 12 ¼ 10 ¼ 21 ⅝ 20 ¾ 24 ¾ 425 510 2 ⅛ 17 21 ¼ 20 ⅝ 24 ¾ 23 ½ 5 1 ⅝ 12 20 ⅜ 12 ¼ 10 ¼ 22 ⅞ 21 ¾ 25 ¾ 515 545 2 ⅛ 17 21 ¼ 22 ⅜ 24 ½ 23 ½ 5 1 ⅝ 12 20 ⅜ 12 ¼ 10 ¼ 22 ⅞ 21 ¾ 25 ¾ 5 35 6 30 2 ½ 19 24 22 ¼ 26 ¼ 25 6 ⅛ 1 ⅞ 14 21 ⅛ 14 ¼ 12 ¼ 24 22 ½ 27 ½ 610 750 2 ½ 19 24 23 ¾ 27 ½ 25 6 ⅛ 1 ⅞ 14 21 ⅛ 14 ¼ 12 ¼ 24 22 ½ 27 ½ 735 915 2 ½ 19 24 24 ⅜ 28 ⅝ 25 6 ⅛ 1 ¾ 14 21 ⅛ 14 ¼ 12 ¼ 24 22 ½ 27 ½ 2 ½ 19 24 25 ⅞ 30 ⅜ 25 6 ⅛ 1 ¾ 14 21 ⅛ 14 ¼ 12 ¼ 24 22 ½ 27 ½ 2 11 15 13 15 19 ½ 3 1 ¼ 10 17 ⅛ 1 0 ¼ 6 ¼ 1 8 ⅛ 17 ⅝ 20 ⅛ 2 70 2 90 2 11 15 14 17 ⅞ 19 ½ 3 1 ¼ 10 17 ⅛ 10 ¼ 6 ¼ 18 ⅛ 17 ⅝ 20 ⅛ 2 80 3 45 2 11 15 16 19 ½ 19 ½ 3 ¾ 1 ¼ 12 17 ½ 12 ¼ 8 ¼ 19 ⅛ 18 ½ 21 ¾ 335 365 2 ⅛ 17 21 ¼ 17 ½ 23 ⅛ 2 3 ½ 3 ¾ 1 ¼ 1 2 1 7 ½ 1 2 ¼ 8 ¼ 1 9 ⅛ 18 ½ 21 ¾ 415 500 2 ⅛ 17 21 ¼ 21 25 23 ½ 4 ⅜ 1 ⅜ 12 19 ½ 12 ¼ 10 ¼ 21 ⅝ 20 ¾ 24 ¾ 5 00 5 30 2 ⅛ 17 21 ¼ 22 ¾ 24 ⅞ 23 ½ 4 ⅜ 1 ⅜ 12 19 ½ 12 ¼ 10 ¼ 21 ⅝ 20 ¾ 24 ¾ 520 635 2 ⅛ 17 21 ¼ 22 ⅛ 26 ⅛ 2 3 ½ 5 1 ⅝ 12 20 ⅜ 12 ¼ 10 ¼ 22 ⅞ 21 ¾ 25 ¾ 630 680 2 ⅛ 17 21 ¼ 23 ⅝ 27 ⅜ 23 ½ 5 1 ⅝ 12 20 ⅜ 12 ¼ 10 ¼ 22 ⅞ 21 ¾ 25 ¾ 6 70 8 50 2 ½ 19 24 24 ⅜ 28 ⅝ 25 6 ⅛ 1 ⅞ 14 21 ⅛ 14 ¼ 12 ¼ 24 22 ½ 27 ½ 840 975 2 ½ 19 24 25 ⅞ 30 ¼ 25 6 ⅛ 1 ⅞ 14 21 ⅛ 1 4 ¼ 1 2 ¼ 2 4 2 2 ½ 2 7 ½ 8 90 1 200 2 11 13/ 16 15 ¾ 14 ⅜ 18 ¼ 29 ⅝ 4 ¼ 2 8 20 ¾ 8 ¼ 4 ¼ 21 ½ 21 ⅛ 23 2 1 1 13/ 16 15 ¾ 16 ¼ 19 ¾ 29 ⅝ 4 ¼ 2 8 2 0 ¾ 8 ¼ 4 ¼ 2 1 ½ 2 1 ⅛ 23 1 ⅞ 17 ¾ 21 ½ 17 ¾ 23 7/ 16 29 ⅝ 4 ¼ 2 ⅛ 8 2 0 ¾ 8 ¼ 4 ¼ 2 1 ½ 2 1 ⅛ 23 1 ⅞ 17 ¾ 21 ½ 21 ⅛ 25 3/ 16 29 ⅝ 4 ¼ 2 ⅛ 8 20 ¾ 8 ¼ 4 ¼ 21 ½ 21 ⅛ 23 1 ⅞ 17 ¾ 21 ½ 22 ⅞ 25 29 ⅝ 4 ¼ 2 ⅛ 8 2 3 ⅝ 8 ¼ 8 ¼ 2 5 ⅜ 24 ⅝ 28 ⅛ 1 ⅞ 17 ¾ 21 ½ 22 9/ 16 26 9/ 16 29 ⅝ 4 ¼ 2 ⅛ 8 2 3 ⅝ 8 ¼ 8 ¼ 2 5 ⅜ 24 ⅝ 28 ⅛ 1 ⅞ 17 ¾ 21 ½ 23 ¼ 27 1/ 16 29 ⅝ 5 ⅜ 2 5/ 16 10 24 ¼ 10 ¼ 10 ¼ 26 ½ 25 ½ 29 ⅝ 2 ¾ 2 1 11/ 16 27 9/ 16 24 5/ 16 28 9/ 16 29 ⅝ 5 ⅜ 1 ⅞ 10 24 ¼ 10 ¼ 10 ¼ 26 ½ 25 ½ 29 ⅝ 2 ¾ 2 1 11/ 16 27 9/ 16 25 13/ 16 30 3/ 16 29 ⅝ 5 ⅜ 1 ⅞ 10 24 ¼ 10 ¼ 10 ¼ 26 ½ 25 ½ 29 ⅝ 2 ¾ 21 11/ 16 27 9/ 16 26 7/ 16 31 5/ 16 29 ⅝ 6 ⅜ 2 12 25 12 ¼ 12 ¼ 27 ¾ 26 7/ 16 31 ⅜ 3 27 33 28 ½ 36 30 ⅞ 7 ¾ 2 ⅞ 18 26 ⅛ 18 ¼ 18 ¼ 30 ⅜ 28 ⅜ 35 ½ 3 27 33 30 ½ 39 ⅜ 30 ⅞ 7 ¾ 2 ⅞ 18 26 ⅛ 18 ¼ 18 ¼ 30 ⅜ 28 ⅜ 35 ½ 3 27 33 32 41 ⅜ 30 ⅞ 7 ¾ 2 ⅞ 18 26 ⅛ 18 ¼ 18 ¼ 30 ⅜ 28 ⅜ 35 ½ 2 1 1 13/ 16 15 ¾ 16 ¼ 19 ¾ 29 ⅝ 4 ¼ 2 8 2 0 ¾ 8 ¼ 4 ¼ 2 1 ½ 2 1 ⅛ 23 1 ⅞ 17 ¾ 21 ½ 17 ¾ 23 7/ 16 29 ⅝ 4 ¼ 2 ⅛ 8 2 0 ¾ 8 ¼ 4 ¼ 2 1 ½ 2 1 ⅛ 23 1 ⅞ 17 ¾ 21 ½ 21 ⅛ 25 3/ 16 29 ⅝ 4 ¼ 2 ⅛ 8 20 ¾ 8 ¼ 4 ¼ 21 ½ 21 ⅛ 23 1 ⅞ 17 ¾ 21 ½ 22 ⅞ 25 29 ⅝ 4 ¼ 2 ⅛ 8 2 3 ⅝ 8 ¼ 8 ¼ 2 5 ⅜ 24 ⅝ 28 ⅛ 1 ⅞ 17 ¾ 21 ½ 22 9/ 16 26 9/ 16 29 ⅝ 4 ¼ 2 ⅛ 8 2 3 ⅝ 8 ¼ 8 ¼ 2 5 ⅜ 24 ⅝ 28 ⅛ 1 ⅞ 17 ¾ 21 ½ 23 ¼ 27 1/ 16 29 ⅝ 5 ⅜ 2 5/ 16 10 24 ¼ 10 ¼ 10 ¼ 26 ½ 25 ½ 29 ⅝ 2 ¾ 2 1 11/ 16 27 9/ 16 24 5/ 16 28 9/ 16 29 ⅝ 5 ⅜ 1 ⅞ 10 24 ¼ 10 ¼ 10 ¼ 26 ½ 25 ½ 29 ⅝ 2 ¾ 2 1 11/ 16 27 9/ 16 25 13/ 16 30 3/ 16 29 ⅝ 5 ⅜ 1 ⅞ 10 24 ¼ 10 ¼ 10 ¼ 26 ½ 25 ½ 29 ⅝ 2 ¾ 21 11/ 16 27 9/ 16 26 7/ 16 31 5/ 16 29 ⅝ 6 ⅜ 2 12 25 12 ¼ 12 ¼ 27 ¾ 26 7/ 16 31 ⅜ 3 27 33 27 ½ 35 ¼ 30 ⅞ 6 ⅜ 2 ⅛ 12 25 12 ¼ 12 ¼ 27 ¾ 26 7/ 16 31 ⅜ 3 27 33 30 ½ 39 ⅜ 30 ⅞ 7 ¾ 2 ⅞ 18 26 ⅛ 18 ¼ 18 30 ⅜ 28 ⅜ 35 ½ 3 27 33 32 41 ⅜ 30 ⅞ 7 ¾ 2 ⅞ 18 26 ⅛ 18 ¼ 18 30 ⅜ 28 ⅜ 35 ½
CONSTRUCTION Lighter weight, corrosion resistance and a precisely molded involute scroll design are all made possible with the fiberglass casing. In addition, the molded rubberized lining provides abrasion resistance greater than steel and a super smooth surface for reduced frictional losses. Maximum inlet air temperature 200 ºF (93 ºC). The riveted, heavy gauge aluminum turbine type impeller utilizes a curved blade design which induces air into the blower inlet and improves efficiency. If a motor replacement is ever necessary, standard shaft T frame motors can be purchased locally and eliminate downtime awaiting a special motor. The simple removal of eight bolts allows the casing and discharge to be rotated to any of seven positions. This rotation can be easily completed without disassembly of the casing. Turbine Design Impeller (Pat. No. 3,472,967) Inlet Turning Ring Seal (Pat. No. 3,572,963) The exclusive curved impeller with built-in air inducer is coupled with a patented inlet turning ring seal to produce operating efficiencies that have been previously unobtainable in Turbo Pressure Blowers. A steel inlet guard is furnished as standard equipment (not shown).
ACCESSORIES SILENCERS The Hauck Inlet Silencer is specifically engineered to provide noise attenuation in the 63 Hz to 8,000 Hz frequency range. The design and the construction materials used ensure a long, trouble-free service life. Pressure drop is less than 1 wc (249 Pa). Use of a studded flange simplifies attachment to the blower. (See Hauck Sheet TBFS-1) FILTERS The Hauck Filter is designed for blowers installed in a dirty atmosphere to prevent dirt from being drawn into the blower and air piping system. The use of an inlet filter can often prevent unbalanced impellers and inefficient blower operation. Minimal pressure drop. Compatible with Hauck Silencers. (See Hauck Sheet TBFS-1) TRANSITIONS, INTAKE ADAPTERS All sizes and types of transition pieces are available to facilitate connecting the blower outlet to the system piping. The transition inlet is designed to fit the blower sleeve while the outlet is available with flanged, welded, threaded, or straight connections. An inlet adapter is available for applications where outside or fresh air must be piped to the blower inlet. Adapter is complete with gasket and necessary fasteners. ORDERING INFORMATION To insure prompt and accurate processing of your order, the following information is required: 1. Catalog Number from Capacity Table.* 2. Discharge Position from Dimensional Drawing (Discharge Position 1 supplied if not specified). * Selection information for special altitude or inlet air temperatures condition is presented on page 6. ANTI NTI-SURGE CONTROLS The Hauck Anti-Surge Control System is composed of a variable vane damper that is attached to the turbo blower inlet flange. Vane position is automatically determined by the system demand. Blower surge is automatically controlled by modulating the pressure drop across the inlet dampers, maintaining a constant discharge pressure. Vane pre-swirl reduces blower HP at part load, and generates a different performance curve at each damper position. This technique, applicable to new or existing installations alike, maintains the flow through the system ABOVE the flow that would allow surging. Additional information on operational theory and application is available in Hauck Application Sheet GJ61. HIGH EFFICIENCY AND SPECIAL DUTY MOTORS (Optional) VIBRATION ISOLATORS BLAST GATES 3. Motor Type ODP or TEFC. High efficiency or special duty motors (Optional). 4. Electrical Specification Voltage and Phase All blowers use 60 Hz 3600 rpm standard shaft motors. 5. Optional Accessories Desired (See TBFS 1).** ** Select accessories compatible with inlet and discharge sizes listed in columns O,R, and S in Dimensional Data. (See page 5). 2001 Printed in U.S.A. 06/01