Slam Dunk GYM SYSTEM. The 4 GM/L VOC WATER BASED POLYSACCHARIDE ACRYLIC GYM FINISH GUARANTEED TO LAST 2 YEARS

Similar documents
PRO-TEX TRUCKBED LINER TECHNICAL DATA SHEET

ProAir Clear LV 2 Pack

TC751 Tec/BASE High Performance Clearcoat

AQUABASE PLUS P HS Express Clearcoat (National Rule)

Pool & Fountain Paints & Deck Coatings Guide. The paint system for every residential or commercial pool, fountain and deck

Self-priming. May be applied over most generic types of coatings.

DIAMOND COAT PLUS Form P-203 (5/95) 3.5 VOC Clear. (#) DT 898 (90 F & Above) (32 C & Above) DT 8110 (85 F & Above) (29 C & Above)

Polidura Glossy PU Topcoat Component A: 6103 Component B: 6199

An Axalta Coating Systems Brand. New Look, Lasting Protection.

Autoclear Superior Pack FOR PROFESSIONAL USE ONLY

Use suitable respiratory protection Contains acrylic resins, xylene and other ingredients. When mixed, it also contains isocyanates.

Parts Manual (EN) COMMERCIAL CLEANING EQUIPMENT MODELS: 20'' DISK 26'' DISK 28'' DISK 24'' EDGE 28'' EDGE

Epoxy Curing Agents and Modifiers

Autoclear Mix & Matt

T17 Scrubber PARTS & CONSUMABLES

Technical Data Sheet PART A & PART B

DP40 is a versatile 2K Epoxy Surfacer. It is light grey in colour, chromate-free and has good corrosion resistance over bare metal.

The Ride of Your Life!

Two coats are normally recommended. Some service may require mils DFT

TECHNICAL DATA SHEET INNOPUR COURT AC-200 ( RESURFACER ) WATERBORNE REPAIR AND ADHESION MATERIAL FOR ASPHALT AND CONCRETE

Autocryl. This product is not for sale to Vehicle Refinishers in the EU, who need to comply to the Directive 2004/42/EC

STUDY GUIDE A Day By Day Course Refreshment Quiz To Ensure That You Make The Most Out Of Your Rod Building Class

D8126 EU-142. CERAMICLEAR Mar and Scratch Resistant Clearcoat. Preparation of Substrate: Required Products. Product Description:

Permasolid HS Clear Coat 8030

SOLAR ENERGY. solutions. adhesives, sealants, and Potting encapsulants For solar energy applications

W00 - W999 OCTOBASE ECO PLUS SYSTEM

AQUABASE PLUS P Extended Performance Clearcoat

SHELF LIFE. Appearance Color 1 (Gardner) Pot life 21 C (70 F) Increased by 15-60% 5 Thin Film Set Time 21 C Increased by % 5

PD100 White, PD200 Black Low VOC Acrylic Polyurethane Topcoat

OMNI MATERIAL SAFETY DATA SHEET PACKAGE

Autocryl Plus LV mm bar at the air inlet. 1-3 minutes at 20 C 1-3 minutes at 20 C

Surf Clear EVO Epoxy system for surfboards

*RTS not recommended for immersion service. Do not exceed 10 mils in a single coat (without additives)

YOU VE WAITED LONG ENOUGH

AQUABASE PLUS P Production Clearcoat

SHOPLINE MATERIAL SAFETY DATA SHEET PACKAGE

POLYCARB2 PREMIUM LENS: RADIUS GOGGLE. Here s what makes the Radius Goggle the best:

10P20-13 High Solids Primer

AQUABASE PLUS P Performance Clearcoat

PNEU-THANE K5090, K5094, K5096 Series

Sacrificial Anti-Graffiti Surface Treatment

Desoprime. HS Primers. CA 7700 Series Application Guide. Where Smart Solutions Take Flight

Technical Diving Equipment. Umbilicals & Hoses

SPECIALLY ENGINEERED TO HELP GROW YOUR BUSINESS

DTM Coatings for Rail. Polyaspartic Ester Technology By Kurt Best Bayer MaterialScience

TECHNICAL DATA SHEET 02GN070A. 02GN070A Epoxy Primer. Product Description. Components. Specifications

TECHNICAL DATA SHEET 513X408B. DeSoto 513X408B Military Water-Borne Primer. Product Description. Components. Specifications

PETF for Durable Cards

Hardener: at least 24 months when stored cool and dry

Protective & Marine Coatings

02GN093 Chrome-Free Epoxy Primer. Kit size 02GN093 base 02GN093CAT Gallon 96oz/2.84L 32oz/946mL Quart 24oz/710mL 8oz/237mL

Impressive & Impervious

Imron Industrial Strength Ultra Low VOC Polyurethane Clear Reduced Gloss Modifications

Carboguard 893 PRODUCT DATA SHEET SELECTION & SPECIFICATION DATA. Generic Type. Cycloaliphatic Amine Epoxy

3M DICHROIC Glass Finishes

Vanguard Complete Chlorine Pool Kit

GUARDIAN EQUIPMENT Emergency Eye Wash and Shower Equipment. ANSI Z358.1 Compliance Checklist

Before application, test the atmospheric conditions in the vicinity of the substrate for the dew formation according to ISO

GLOBAL MATERIAL SAFETY DATA SHEET PACKAGE

This versatile, quick drying, easy to apply and sand primer may be applied as a conventional spray filler or primer surfacer.

AkzoNobel Aerospace Coatings. Primerr. Product Group. Epoxy primer. Characteristics Product Information. resistance. Components * TR-114. permits.

Mix ratio (by volume): 44GN011 (base component) 44GN011CAT (catalyst component) Reducer (Distilled or Deionized water) MCS0200 Grade E

ESCONDIDO FIRE DEPT TRAINING MANUAL Section Truck Module Page 1 of 5 Ropes Care and Maintenance Revised

AQUABASE PLUS P Performance Clearcoat - National Rule

SOFT-TOUCH IN-BAY AUTOMATIC VEHICLE WASH SYSTEM

Advantages of ALEXIT BladeRep

Simplicity in VRU by using a Beam Gas Compressor

XL7000 Complete Chlorine Pool Kit

Mix ratio (by volume): 513K009 (base component) (activator component)

EMERGENCY PIPE REPAIR

Northern Kentucky University Issue Date: 11/02/2018 Revised Date: Title: PERSONAL PROTECTIVE EQUIPMENT PROCEDURE OBJECTIVE AND PURPOSE

D839 can be applied as a conventional spray filler, primer surfacer or sealer. It may be air-dried, low baked or IR cured.

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 35 C calculated IED (2010/75/EU) (theoretical)

Can be used on helidecks, walkways, ramps, weigh bridge decks, decks in general where abrasion resistance and non-slip properties are required.

REPAIR MANUAL. Materials

44GN072 Water Reducible Low Density Epoxy Primer

The ultimate powered air purifying respirator

Careful planning will prevent unwanted headaches later!

The Application Guide offers product details and recommended practices for the use of the product.

TECHNICAL DATA SHEET 44Y Y032 Water Reducible Epoxy Primer. Product Description. Components. Specifications

JEFFERSON COLLEGE PAINT I

The World Leader In Artificial Turf TOP REASONS. Why FieldTurf is the Only Choice

Thank you for your purchase of this Citizen watch. Before using the watch, read this instruction manual carefully to ensure correct use.

High Performance Clean Room Doors. When it comes to clean think Rite-Hite.

BALLFIELD CLAYS. Our Ballfield Clay Products have been developed precisely for baseball fields. CONDITIONERS C L A Y - B A S E D S U R F A C E S SANDS

Why Choose A Polymer Wall Swimming Pool?

Heresite VR-514 T E C H N I C A L D A T A S H E E T

EasyTouch. Because automation makes it all so simple. Pool and Spa Control Systems. By Pentair Water Pool and Spa

Ruskinn Hypoxia and Anoxia Workstations. innovation in incubation

Eco-Prime EWDE072 Military Water-Borne Epoxy Primer

Application of Fillers

PRC CO ² -LASER PRESENTATION

PRO-ROD TM COILED ROD. Reduce Maintenance Increase Production Enhance Profit

Is Lime Souring Your Valve Operation?

General: Primarily designed for maintenance and repair. In immersed environments Jotamastic 80 Aluminium is suitable.

Property Test/Standard Description

Discussion and guidance on the definition and qualification of porous loads

EasyTouch. Pool and Spa Control Systems By Pentair Water Pool and Spa. Because automation makes it all so simple

DFT in excess of 8.0 mils per coat is not recommended.

TECHNICAL DATASHEET CARAPACE EMP110 W- LED

Transcription:

The Slam Dunk GYM SYSTEM 4 GM/L VOC WATER BASED POLYSACCHARIDE ACRYLIC GYM FINISH WILL OUTPERFORM ALL 350 VOC GYM FINISHES MANUFACTURED TODAY GUARANTEED TO LAST 2 YEARS

POLYSACCHARIDES THE POLYMER Slam Dunk Plus is made with a Polysaccharide acrylic polymer that is derived from tree based sugars. Due to its natural state as being plant-based, Polysaccharide polymers are naturally drawn to wood as wood surfaces are its natural place of origin. Therefore in conjunction with Ultra Technology, Slam Dunk Plus provides outstanding performance advantages that are simply not seen in conventional urethane, epoxy or acrylic gym finishes. Just a few features of Slam Dunk Plus s Polysaccharide polymer base are: THAT WAS MADE FOR WOOD. FEATURES AND BENEFITS SUPERIOR/NATURAL PENETRATION AND ABSORPTION INTO THE WOOD SUBSTRATE EXTREMELY LOW IN VOLATILE ORGANIC COMPOUNDS (VOC S) ENHANCES NATURAL COLOR OF THE WOOD ELIMINATES DELAMINATION BURNISHABLE SUSTAINS FLEXIBILITY OF THE WOOD REDUCES LAP MARKS LOW ODOR

URETHANE WATER BASED ACRYLIC URETHAN WATER BORNE OIL MODIFIED WATER BASED ACRYLIC URETHA WATER BORNE OIL MODIFIED DETERIORATED APPEARANCE Acrylic and Urethane blends result in color change of the floor (amber). This leaves the wood with a dilapidated appearance. x INCOMPATIBLE TO WOOD Urethane being a synthetic foreign body does not naturally attach itself to wood surfaces. FLEXIBILITY IS LOST Urethane is hardened in between the grooves of the wood panels eliminating the woods ability to flex. This will result in cracked flooring. DELAMINATION OVER TIME Due to Urethane and Wood s physical incompatibilities, wood will begin to peel from the floor leading to severe delamination. WHY URETHANE MISSES THE MARK WATER BASED ACRYLIC URETHA WATER BORNE OIL MODIFIED

THE ULTRA TECHNOLOGY ADVANTAGE POLYSACCHARIDE POLYMER TECHNOLOGY Non-Styrene Polymer Internal Thermal Catalyst Electrolytic Cleaning Styrene is a known carcinogen that causes floor finishes to yellow or discolor. Unlike conventional finishes, Ultra finishes do not contain any styrene. Using an advanced Acrylic dual polymer technology, Ultra Chem Labs finishes are environmentally safer, sustain high levels of durability, are easy to maintain and do not discolor or yellow. With proper maintenance of Ultra floor finishes, stripping cycles can be dramatically reduced or eliminated. Internal Thermal Catalyst Technology allows Ultra polymer technology to dry from the bottom up versus conventional top down drying. The difference in technology provides two major procedural advantages: Extra fast drying time and easy walk-on repairs. Utilizing Electrolytic Cleaning Technology allows Cleaner and Conditioner to remove soil by neutralizing the ionic charge of the soil and surface. Therefore the targeted soil no longer has the ability to stick to the substrate resulting in easy soil removal which also keeps surfaces cleaner for extended periods of time. Slam Dunk GYM SYSTEM

NOT JUST A PROMISE, BUT A GUARANTEE Slam Dunk Plus is guaranteed to last at least 2 years when applying Ultra s maintenance and cleaning procedures. 2 PEOPLE For application 3 HOURS FOR 2 COATS Based upon normal conditions 3 2 SAME DAY PREP AND PLAY By following Ultra application procedures

The Slam Dunk GYM SYSTEM TWO PRODUCT SYSTEM 1 GYM FINISH 2 EVERYTHING ELSE Slam Dunk Plus GYM FINISH Slam Dunk CLEAN AND PREP ALL-IN ONE Water Based Polysaccharide Acrylic Gym Finish (40% solids). The result is an extremely tough finish resistant to black marks that repel unwanted foreign particles which only requires low level maintenance and cleaning. Equipped with Internal Thermal Catalyst Technology, Slam Dunk Plus dries fast with excellent leveling and curing qualities. Slam Dunk Plus possesses superior performance and durability to oil modified, Epoxy, Water based oil modified and acrylic products. No sanding or screening Fast drying (30-60 min with normal conditions) Same day prep and play Easily restorable with high gloss MFMA approved Finish can last 2 years and beyond VOC s at 4 gm/l Enhances natural color of the wood Low odor Burnishable Repairable Equipped with Electrolytic Cleaning Technology, Clean, and Prep with one amazing product. What the industry does with 5-6 products, do with 1. Slam Dunk Clean and Prep will substantially reduce job time, chemical use/cost allowing you to accomplish each job quicker and more efficiently. Clean Clean and conditions surface to restore and extend the life of the floor For damp mopping or scrubbing of wood floors Prep Cleans and repairs floors to like new conditions Removes deeply embedded dirt and scuffs Improves slip resistance Excellent dilution ratio

The Slam Dunk DIFFERENCE Features Water Based Polysaccharide Acrylic Polymer Water Based Acrylic Water Based Urethane Epoxy Oil Modified Urethane NO SANDING/SCREENING DRY TIMES 30-60 MIN* SAME DAY PREP/PLAY** FINISH LASTS 2 YEARS AND BEYOND*** VOC S AT 4GM/L DRIES CLEAR/ENHANCES COLOR LOW ODOR 40% SOLIDS REPAIRABLE BURNISHABLE *Pending normal conditions of humidity **By following Ultra application procedures for Slam Dunk Plus ***By following Ultra maintenance and cleaning procedures using Slam Dunk Clean and Prep. Ultra Chem Labs has developed a water based gym finish with championship characteristics that exceed industry standards and expectations. Slam Dunk Plus incorporates the best of Ultra technology to provide the highest performing gym finish today. Then apply Slam Dunk Clean and Prep to handle the rest. Use only 2 products to implement the best gym care system in the industry today.

SEE FOR YOURSELF THE DURABILITY AND OUTSTANDING PERFORMANCE OF THE SLAM DUNK GYM SYSTEM. CONTACT YOUR ULTRA CHEM LABS CORP REPRESENTATIVE TO SCHEDULE A DEMONSTRATION OR CONTACT US FOR MORE INFORMATION. 4581 Brickell Privado St Ontario, CA 91761 Tel - 909-605-1640 Fax - 909-605-1068 WWW.ULTRACHEMLABS.COM EASY TO APPLY No Sanding Or Screening Required Two Product System FAST DRYING 30-60 Min Under Normal Conditions ENVIRONMENTALLY CONSCIOUS VOC Compliant at 4gm/L Water Based Ultra Green Approved HIGH PERFORMANCE Same Day Prep And Play Super High Gloss Super Durable Guaranteed To Last 2 Years S U S T A I N A B L E Approved GREEN P R O D U C T S 2015 Ultra Chem Labs Corp. All Rights Reserved