NUWALL METAL WALL PANEL NuWall combines the ease of installation in both new and retrofit applications with the pleasing aesthetic appeal of a clean, uninterrupted wall. For retrofit construction, all installation work is performed outside with no disruption to the interior workplace. The NuWall Panel can be installed over an existing R panel wall; other panel profiles may require the use of subgirts. The panel is attached to the structure with self-drilling fasteners on one side of the panel only, no clips required. The adjoining panel simply snaps into the previous panel for a quick installation. NUWALL METAL WALL PANEL FEATURES Profile: 2 ½" deep panel with ½" deep fluting Module Width: 12" Panel Lengths: 5'-0" to 40'-0" Exterior Facing: Smooth as standard G-90 galvanized and/or AZ-50 aluminum-zinc coated steel in 24 Ga. and 22 Ga. Standard Exterior: Full-Strength 70% PVDF Fluoropolymer Coating or Siliconized Polyester Coating Finishes & Colors: Please see Page Two for all available colors. Please inquire where order minimums apply. Fastening: Concealed Fastening System 2013 Metl-Span - A Division of NCI Group, Inc. - All rights reserved. Printed in the U.S.A. METL-13-019-2-18
NUWALL METAL WALL PANEL NUWALL METAL WALL PANEL COLORS PANEL NAME NUWALL PANEL AVAILABLE GAUGES 24 GA. 22 GA. STANDARD II Brownstone OM OM Almond OM OM Harbor Blue OM OM Pacific Blue OM OM Colonial Red OM OM Brite Red OM OM Slate Gray OM OM PREMIUM I Tundra OM OM Snow White OM OM Natural Patina OM OM Spruce OM OM Hunter Green OM OM Classic Green OM OM Medium Bronze OM OM PREMIUM II METALLIC Copper Metallic OM OM Silver Metallic OM OM STANDARD SP Light Stone OM OM Hawaiian Blue OM OM Fern Green OM OM Burnished Slate OM OM PREMIUM SP Koko Brown OM OM Charcoal Gray OM OM Rustic Red OM OM Solar White OM OM = Available with no order minimums required OM = Available with order minimums N/A = Color not available Standard II, Premium I & Premium II Metallic: Full-Strength 70% PVDF Fluoropolymer Coating zstandard SP & Premium SP: Siliconized Polyester Coating 2013 Metl-Span - A Division of NCI Group, Inc. - All rights reserved. Printed in the U.S.A. METL-13-019-2-18
SHADOWRIB METAL WALL PANEL The ShadowRib Panel is a proven performer and versatile tool for designers. The panel has superior structural strength that does not sacrifice appearance or design flexibility. The deep flutes featured on this panel create distincitive shadow lines on your structure. The ShadowRib Panel may be secured to your structure from the outside of the building with concealed clips or from the inside of the building with an expansion fastenerboth methods create a secure interlock between the panel and structure. SHADOWRIB METAL WALL PANEL FEATURES Profile: 3" deep panel with 1 ½" deep by 5 ¼" wide fluting Module Width: 16" Panel Lengths: 5'-0" to 40'-0" Exterior Facing: Smooth as standard G-90 galvanized and/or AZ-50 aluminum-zinc coated steel in 24 Ga. and 22 Ga. Standard Exterior: Full-Strength 70% PVDF Fluoropolymer Coating or Siliconized Polyester Coating Finishes & Colors: Please see Page Two for all available colors. Please inquire where order minimums apply. Fastening: Concealed Fastening System 2013 Metl-Span - A Division of NCI Group, Inc. - All rights reserved. Printed in the U.S.A. METL-13-019-2-19
SHADOWRIB METAL WALL PANEL SHADOWRIB METAL WALL PANEL COLORS PANEL NAME SHADOWRIB PANEL AVAILABLE GAUGES 24 GA. 22 GA. STANDARD II Brownstone OM Almond OM Harbor Blue OM Pacific Blue OM Colonial Red OM Brite Red OM Slate Gray OM PREMIUM I Tundra OM Snow White OM Natural Patina OM Spruce OM Hunter Green OM Classic Green OM Medium Bronze OM PREMIUM II METALLIC Copper Metallic OM Silver Metallic OM STANDARD SP Light Stone OM Hawaiian Blue OM Fern Green OM Burnished Slate OM PREMIUM SP Koko Brown OM Charcoal Gray OM Rustic Red OM Solar White OM = Available with no order minimums required OM = Available with order minimums N/A = Color not available Standard II, Premium I & Premium II Metallic: Full-Strength 70% PVDF Fluoropolymer Coating Standard SP & Premium SP: Siliconized Polyester Coating metlspan.com Visit our website or call us today for a free architectural catalog and CAD CD-ROM. 2013 Metl-Span a division of NCI Group, Inc. - All rights reserved. Printed in the U.S.A. METL-13-019-2-19
FW-120 METAL WALL PANEL The FW-120 Panel is a concealed fastener wall and liner panel that provides a flat appearance. FW-120 is commonly used for architectural, commercial and industrial markets. The heavy gauge offering provides for large spanning capabilities, particularly in composite wall applications. The panel is available in a flat profile, with one bead or two beads. 12" FW 120-0 1½" 4" 12" 4" 4" 12" 1½" 1½" FW 120-2 (with Beads) FW 120-1 (with Bead) FW-120 METAL WALL PANEL FEATURES Profile: Flat with options of one bead at 6" o.c. or two beads, 4" apart Module Width: 12" Panel Lengths: 5'-0" to 30'-0" Exterior Facing: Smooth as standard G-90 galvanized and/or AZ-50 aluminum-zinc coated steel in 24 Ga., 22 Ga. and 20 Ga. Standard Exterior: Full-Strength 70% PVDF Fluoropolymer Coating Finishes & Colors: Please see Page Two for all available colors. Please inquire where order minimums apply. Fastening: Concealed Fastening System 2013 Metl-Span - A Division of NCI Group, Inc. - All rights reserved. Printed in the U.S.A. METL-13-019-2-17
FW-120 METAL WALL PANEL FW-120 METAL WALL PANEL COLORS PANEL NAME FW-120 PANEL AVAILABLE GAUGES 24 GA. 22 GA. 20 GA. STANDARD II Brownstone OM OM Almond OM OM Harbor Blue OM OM Pacific Blue OM OM Colonial Red OM OM Brite Red OM OM Slate Gray OM OM PREMIUM I Tundra OM OM Snow White OM OM Natural Patina OM OM Spruce OM OM Hunter Green OM OM Classic Green OM OM Medium Bronze OM OM = Available with no order minimums required OM = Available with order minimums N/A = Color not available Standard II & Premium I: Full-Strength 70% PVDF Fluoropolymer Coating 2013 Metl-Span - A Division of NCI Group, Inc. - All rights reserved. Printed in the U.S.A. METL-13-019-2-17
ARTISAN SERIES METAL SOFFIT PANEL The simplicity of the Artisan Series Soffit Panel is its best design feature. Uniform dimensions and clean appearance allow the designer to plan modules, eliminate complicated pieces and follow wall curvatures. The Artisan Panel can be vertical, horizontal, perpendicular or skewed to the building line, allowing the designer multidimensional freedom to create. Note: This panel is for soffit and interior liner panel use only. 8" L-8 1" 12" 10" L-12 1 L-10 1" ARTISAN SERIES METAL SOFFIT PANEL FEATURES Profile: Flat panel Module Width: 8", 10" or 12" Panel Lengths: 8" Panel: 4'-0" to 20'-0" 10" Panel: 4'-0" to 10'-0" 12" Panel: 4'-0" Inquire about longer lengths Exterior Facing: Smooth as standard G-90 galvanized and/or AZ-50 aluminum-zinc coated steel in 26 Ga., 24 Ga. and 22 Ga. Standard Exterior: Full-Strength 70% PVDF Fluoropolymer Coating or Siliconized Polyester Coating Finishes & Colors: Please see Page Two for all available colors. Please inquire where order minimums apply. Fastening: Concealed Fastening System 2013 Metl-Span - A Division of NCI Group, Inc. - All rights reserved. Printed in the U.S.A. METL-13-019-2-20
ARTISAN SERIES METAL SOFFIT PANEL ARTISAN SERIES METAL SOFFIT PANEL COLORS PANEL NAME ARTISAN SERIES: 8", 10" & 12" AVAILABLE GAUGES 26 GA. 24 GA. 22 GA. STANDARD II Brownstone N/A OM Almond N/A OM Harbor Blue N/A OM Pacific Blue N/A OM Colonial Red N/A OM Brite Red N/A OM Slate Gray N/A OM PREMIUM I Tundra N/A OM Snow White N/A OM Natural Patina N/A OM Spruce N/A OM Hunter Green N/A OM Classic Green N/A OM Medium Bronze N/A OM PREMIUM II METALLIC Copper Metallic N/A OM Silver Metallic N/A OM STANDARD SP Light Stone OM Hawaiian Blue OM Fern Green OM PREMIUM SP Koko Brown OM Charcoal Gray OM Rustic Red OM Solar White OM = Available with no order minimums required OM = Available with order minimums N/A = Color not available Standard II, Premium I & Premium II Metallic: Full-Strength 70% PVDF Fluoropolymer Coating Standard SP & Premium SP: Siliconized Polyester Coating 2013 Metl-Span - A Division of NCI Group, Inc. - All rights reserved. Printed in the U.S.A. METL-13-019-2-20
36" EXPOSED FASTENER METAL WALL PANELS METL-SPAN EXPOSED FASTENER SINGLE-SKIN PANELS When a design calls for a commercial or industrial thru-fastener panel, 7.2 Panel offers versatility and functionality. 7.2 Panel is a 36" wide panel with symmetrical 1 ½ high ribs on 7.2" centers. This rugged panel also offers excellent spanning capability. The PBR Panel is used for a wide variety of architectural, commercial, and industrial applications. PBR is a structural panel with exposed fasteners used on wall applications. The PBU Panel is an exposed fastener system that can be used both horizontally and vertically for wall applications. It can be installed directly over purlins or joists and gives designers a contemporary appearance for their building project. 36 EXPOSED FASTENER METAL WALL PANEL FEATURES Profile: 7.2: Traditional high rib pattern at 7.2" o.c. PBR: 1 ¼" rib height at 12" o.c. PBU: ¾" rib height at 6" o.c. Module Width: 36" Panel Lengths: 5'-0" to 50'-0" Exterior Facing: Smooth as standard G-90 galvanized and/or AZ-50 aluminum-zinc coated steel in 26 Ga., 24 Ga. and 22 Ga. Standard Exterior: Full-Strength 70% PVDF Fluoropolymer Coating or Siliconized Polyester Coating Finishes & Colors: Please see Page Two for all available colors. Please inquire where order minimums apply. Fastening: Exposed Fastening System 2013 Metl-Span - A Division of NCI Group, Inc. - All rights reserved. Printed in the U.S.A. METL-13-019-2-21
36" EXPOSED FASTENER METAL WALL PANELS METL-SPAN EXPOSED FASTENER SINGLE-SKIN PANELS 36 EXPOSED FASTENER METAL WALL PANEL COLORS PANEL NAME 7.2 PANEL PBR PANEL PBU PANEL AVAILABLE GAUGES 26 GA. 24 GA. 22 GA. 26 GA. 24 GA. 22 GA. 26 GA. 24 GA. 22 GA. STANDARD II Brownstone N/A OM OM N/A N/A N/A N/A Almond N/A OM OM N/A N/A N/A N/A Harbor Blue N/A OM OM N/A N/A N/A N/A Brite Red N/A OM OM N/A N/A N/A N/A PREMIUM I Slate Gray N/A OM OM N/A N/A N/A N/A Snow White N/A OM OM N/A N/A N/A N/A Classic Green N/A OM OM N/A N/A N/A N/A Medium Bronze N/A OM OM N/A N/A N/A N/A STANDARD SP Light Stone OM OM OM OM OM Ash Gray OM OM OM OM OM Hawaiian Blue OM OM OM OM OM Crimson Red OM OM OM OM OM Fern Green OM OM OM OM OM Saddle Tan OM OM OM OM OM PREMIUM SP Desert Sand OM OM OM OM OM Burnished Slate OM OM OM OM OM Koko Brown OM OM OM OM OM Charcoal Gray OM OM OM OM OM Rustic Red OM OM OM OM OM Gallery Blue OM OM OM OM OM = Available with no order minimums required OM = Available with order minimums N/A = Color not available Standard II & Premium: Full-Strength 70% PVDF Fluoropolymer Coating Standard SP & Premium SP: Siliconized Polyester Coating 2013 Metl-Span - A Division of NCI Group, Inc. - All rights reserved. Printed in the U.S.A. METL-13-019-2-21
32" EXPOSED FASTENER METAL WALL PANELS METL-SPAN EXPOSED FASTENER SINGLE-SKIN PANELS PBC Panels are attached to a building structure with exposed fasteners. It can be installed vertically or horizontally, but most commonly used in horizontal wall applications. 2.67" 32" " The PBD Panel is an exposed fastener wall panel with symmetrical ribs from top to bottom. 2.67" 32" 32 EXPOSED FASTENER METAL WALL PANEL FEATURES Profile: PBC: 7 /8" rib height at 2 2 /3" o.c. PBD: 5 /8" rib height at 2 2 /3" o.c. Module Width: 32" Panel Lengths: 5'-0" to 50'-0" Exterior Facing: Smooth as standard G-90 galvanized and/or AZ-50 aluminum-zinc coated steel in 26 Ga., 24 Ga. and 22 Ga. PBC panel not available in 22 Ga. Standard Exterior: Full-Strength 70% PVDF Fluoropolymer Coating or Siliconized Polyester Coating Finishes & Colors: Please see Page Two for all available colors. Please inquire where order minimums apply. Fastening: Exposed Fastening System 2013 Metl-Span - A Division of NCI Group, Inc. - All rights reserved. Printed in the U.S.A. METL-13-019-2-22
32" EXPOSED FASTENER METAL WALL PANELS METL-SPAN EXPOSED FASTENER SINGLE-SKIN PANELS 32 EXPOSED FASTENER METAL WALL PANEL COLORS PANEL NAME PBC PANEL PBD PANEL AVAILABLE GAUGES 26 GA. 24 GA. 22 GA. 26 GA. 24 GA. 22 GA. STANDARD II Brownstone N/A N/A N/A N/A Almond N/A N/A N/A N/A Harbor Blue N/A N/A N/A N/A Brite Red N/A N/A N/A N/A PREMIUM I Slate Gray N/A N/A N/A N/A Snow White N/A N/A N/A N/A Classic Green N/A N/A N/A N/A Medium Bronze N/A N/A N/A N/A STANDARD SP Light Stone OM N/A OM OM Ash Gray OM N/A OM OM Hawaiian Blue OM N/A OM OM Crimson Red OM N/A OM OM Fern Green OM N/A OM OM Saddle Tan OM N/A OM OM PREMIUM SP Desert Sand OM N/A OM OM Burnished Slate OM N/A OM OM Koko Brown OM N/A OM OM Charcoal Gray OM N/A OM OM Rustic Red OM N/A OM OM Gallery Blue OM N/A OM OM = Available with no order minimums required OM = Available with order minimums N/A = Color not available Standard II & Premium I: Full-Strength 70% PVDF Fluoropolymer Coating Standard SP & Premium SP: Siliconized Polyester Coating 2013 Metl-Span - A Division of NCI Group, Inc. - All rights reserved. Printed in the U.S.A. METL-13-019-2-22
DESIGNER SERIES METAL WALL PANELS The Designer Series 12" Flat Panel provides an elegant, clean design for any building with the toughness of metal. The panel offers a 1 ¾" deep leg that is the perfect cavity for rigid board insulation. The Designer Series 16 Fluted Panel provides an elegant, clean design for any building with the toughness of metal. The panel offers a continuous rib design with a hidden sidelap where the panels join together. The ribs provide interesting shadow lines along the length of the wall. The panel legs are 1 ¾" deep, allowing ample space for rigid board, blanket, or batt insulation in the cavity. DESIGNER SERIES FLAT METAL WALL PANEL FEATURES Profile: 12" Flat: Flat with a 1 ¾" deep leg 16" Fluted: 4" wide flutes, nominal 3 /8" deep with a 1 ¾" deep leg Module Width: 12" for flat panel, 16" for fluted Panel Lengths: 12" Flat: 5'-0" to 30'-0" 16" Fluted: 5'-0" to 35'-0" Exterior Facing: Smooth as standard G-90 galvanized and/or AZ-50 aluminum-zinc coated steel in 24 Ga. and 22 Ga. Standard Exterior: Full-Strength 70% PVDF Fluoropolymer Coating or Siliconized Polyester Coating Finishes & Colors: Please see Page Two for all available colors. Please inquire where order minimums apply. Fastening: Concealed Fastening System 2013 Metl-Span - A Division of NCI Group, Inc. - All rights reserved. Printed in the U.S.A. METL-13-019-2-16
DESIGNER SERIES METAL WALL PANELS DESIGNER SERIES FLAT METAL WALL PANEL COLORS PANEL NAME DESIGNER SERIES DESIGNER SERIES 12" FLAT 16" FLUTED AVAILABLE GAUGES 24 GA. 22 GA. 24 GA. 22 GA. STANDARD II Brownstone OM OM OM Almond OM OM OM Harbor Blue OM OM OM Pacific Blue OM OM OM Colonial Red OM OM OM Brite Red OM OM OM Slate Gray OM OM OM PREMIUM I Tundra OM OM OM Snow White OM OM OM Natural Patina OM OM OM Spruce OM OM OM Hunter Green OM OM OM Classic Green OM OM OM Medium Bronze OM OM OM PREMIUM II METALLIC Copper Metallic OM OM OM Silver Metallic OM OM OM STANDARD SP Light Stone OM OM OM Hawaiian Blue OM OM OM Fern Green OM OM OM PREMIUM SP Burnished Slate OM OM OM Koko Brown OM OM OM Charcoal Gray OM OM OM Rustic Red OM OM OM Solar White OM OM OM = Available with no order minimums required OM = Available with order minimums N/A = Color not available Standard II, Premium I & Premium II Metallic: Full-Strength 70% PVDF Fluoropolymer Coating Standard SP & Premium SP: Siliconized Polyester Coating 2013 Metl-Span - A Division of NCI Group, Inc. - All rights reserved. Printed in the U.S.A. METL-13-019-2-16