1 of 5 MATERIAL SAFETY DATA SHEET Section 1 Identification of Chemical Product and Company Company Details Company Name: Action Corrosion Pty Ltd (atf JAB Trust) Address: Unit 3 / 18 Industry Drive TWEEDS HEADS SOUTH NSW 2486 Telephone Number (Business Hrs): 07 55242990 Fax Number: 07 55242990 24 Hr Emergency Number: 0414 533 960 Product Identification Product Name: Manufacturer s Product Code: Recommended Use: Section 2 Hazard Identification Action Corrosion Clear Coat Aerosol 400g ACT501 External industrial use Hazardous according to the criteria of NOHSC Australia. Dangerous Good according to the Australian Dangerous Goods (ADG) Code. Risk Phrases: R 2 Risk of explosion by shock, friction, fire, other sources of ignition R 5 Heating may cause an explosion R11 Highly flammable R16 Explosive when mixed with oxidising substances R18 In use, may form flammable/ explosive vapour-air mixture R20 Harmful by inhalation R21 Harmful in contact with skin R22 Harmful if swallowed R30 Can become highly flammable in use R36 Irritating to eyes R37 Irritating to respiratory system R38 Irritating to skin R41 Risk of serious eye damage R42 - May cause sensitisation by inhalation R43 May cause sensitisation by skin contact R48 Danger of serious damage to health by prolonged exposure R65 Harmful, may cause lung damage if swallowed R66 Repeated exposure may cause skin dryness and cracking R67 Vapours may cause drowsiness and dizziness 1
2 of 5 Safety Phrases: S 3 Keep in a cool place S 9 Keep container in well ventilated storage S16 Keep away from sources of ignition S21 When using do not smoke S23 Do not breathe fumes S24 Avoid contact with skin S25 Avoid contact with eyes S26 In case of contact with eyes, rinse immediately with plenty of water & seek medical advice S27 Take off immediately all contaminated clothing S29 Do not empty into drains S33 Take precautionary measures against static discharge S35 This material and its container must be disposed of in a safe way S36 Wear suitable protective clothing S37 Wear suitable gloves S38 In case of insufficient ventilation, wear suitable respiratory equipment S39 Wear eye/ face protection S45 In case of accident or if you feel un-well seek medical attention immediately S46 If swallowed, seek medical advice immediately and show container or label S49 Keep only in original container ADG Classification: 3 UN Number: 1263 Hazchem: 3 [Y] E Section 3 Composition/ Information on Ingredients Ingredients: CAS NO Proportion Ketones 67-64-1 15% - 18% Hydrocarbons 64742-95-6 16% - 20% Mixed Esters 141-78-6 8% - 12% Non-Hazardous Materials To Make 100% Propellant 115-10-6 DME 50% concentrate 50% propellant Section 4 First Aid Measures Swallowed: DO NOT INDUCE VOMITING. Remove victim from area of exposure. Wash out mouth with water. Ingestion of material may cause gastrointestinal disturbance, including irritation, nausea, vomiting. Seek medical attention. Eye: If contact with eye/s occurs, immediately irrigate the eye with plenty of water for at least 15 minutes, holding the eye open. Do not attempt to remove contact lenses unless trained. Obtain medical attention. Skin: Inhaled: First Aid Facilities: Advice to doctor: SECTION 5 Fire Fighting Measures Extinguishing Media: If skin and/ or hair contaminated remove clothing including footwear and wash both skin and hair with plenty of running water and soap. Wash or dry-clean contaminated clothing before re-use. If irritation seek medical attention. Vapours may cause drowsiness and dizziness. Remove from exposure to fresh air. Remove contaminated clothing and loosen remaining clothing. Allow patient to recover, keep warm and at rest. Obtain medical attention if required. Provide ready access to running water and first aid kit. Show this Material Safety Data Sheet to a medical practitioner. Treat symptomatically. Alcohol-resistant foam, dry chemical, carbon dioxide, fog. Do not use water jet for fire fighting. 2
Flammability: Specific Hazards: Fire Fighting: Hazchem Code: Precautions in connection with fire: 3 of 5 The product is flammable and may be ignited at temperatures above its flash point by flame, sparks or non flameproof electrical equipment. Combustible. Closed containers may explode when exposed to extreme heat (fire). This product will emit flammable vapours if exposed to extreme heat. May decompose on heating, producing toxic fumes oxides of carbon and nitrogen. Wear self-contained breathing apparatus and protective clothing including gloves. 3 [Y] E Fire-fighters should wear full protective clothing and self contained breathing apparatus. SECTION 6 Accidental Release Measures Spills: Disposal: Environmental: To clean up wear protective equipment to protect skin and eye contact. Wear protective clothing including gloves. Increase ventilation. Consult the Australian Standard mentioned in Section 8. In the event of a major spill, do NOT allow product to enter drains, water courses or sewers. Stay upwind; remove all sources of ignition. Contain the spill and absorb with sand, earth or other inert material. Use clean NON-SPARKING tools to collect material and place into suitable labelled containers for recycling or disposal. Dispose of product and container in accordance with Local, State, Federal and EPA regulations. Prevent the material from entering the drains and waterways. Advise authorities if spillage has entered water course or sewer or has contaminated soil or vegetation. Do not flush drains or waterways. SECTION 7 Handling and Storage Precautions for Safe Handling: Conditions for Safe Storage: SECTION 8 Exposure Controls/ Personal Protection National Exposure Standards: Classified as Dangerous Goods. Use in a well ventilated area. Do NOT store or use in confined spaces. Build up of mists or vapour in the atmosphere must be prevented. Avoid breathing in spray or mists or vapours, Do not smoke. When dealing with this product skin exposure without prevention should be prevented in order to lessen the possibility of skin disorders. Maintain high standard of personal hygiene ie. Wash hands prior to eating, drinking, smoking and using toilet facilities. Keep container closed when not in use and securely sealed, labelled and protected against physical harm. Store in a cool, dry well-ventilated area away from heat, sources of ignition, oxidising agents, foodstuffs and clothing. Keep out of sunlight and protect from weather. Containers should always be kept closed in storage and properly labelled. Provide adequate ventilation. Check regularly for deficiencies such as container damage or leaks. Do not pressurise, cut, heat or weld containers as they may contain hazardous residues. TLV TWA: 100ppm STEL: Not established 3
Biological Limit Values: No biological limit allocated 4 of 5 Engineering Control: Respiratory Protection: Where vapours or mists are generated, particularly in enclosed areas, and natural ventilation is inadequate, a local exhaust ventilation system is required. Refer AS1940 storage and handling flammable and combustible liquids.. If engineering controls are not effective in controlling airborne exposure then respiratory protective equipment should be used. Reference should be made to Australian Standards AS 1715 and AS 1716. Personal Protective Equipment: Hygiene Measures: SECTION 9 Physical and Chemical Properties Appearance: Odour: ph Vapour Pressure: Vapour Density (Air =1): Boiling Point: Freezing/ Melting Point: Solubility in Water: SECTION 10 Stability and Reactivity Wear protective overalls, chemical goggles or safety glasses with side shields, impervious gloves, and suitable chemical resistant footwear. Respiratory Equipment: AS1715 and AS1716 Protective Gloves: AS2161 Industrial Clothing: AS2919 Eye Protection: AS1336 and AS1337 Protective Footwear: AS2210 Ensure a high level of personal hygiene when using this product. Always wash hands before eating, drinking, smoking or using the toilet. Clear or coloured Liquid Mild Ketone Odour Not applicable 0.6kPa@20ºC 80 C Not applicable Insoluble Specific Gravity:.96 1.2 Flash Point: Flammability: -16ºC Flammable Flammability Limits: LEL 1.0% - UEL 7.0% Ignition Temperature: ADDITIONAL INFORMATION: Specific Heat Value: Particle Size: Not applicable VOC Content: 42% - 52% Evaporation Rate: Viscosity: Ford 4: 26-36 Percent Volatile: 42% - 52% Hazardous: Materials to Avoid: Hazardous Oxidising agents Chemical Stability: Conditions to Avoid: Incompatible Materials: Hazardous Decomposition Products: Hazardous Reactions: Stable under normal conditions of storage. Reacts with oxidising agents. Heat, direct sunlight, open 4 flames, other sources of ignition Strong oxidising agents Thermal decomposition may result in the release of toxic and/or irritating fumes. Hazardous polymerisation will not occur
SECTION 11 Toxicological Information: 5 of 5 Toxicology Information: Inhalation: Ingestion: Skin: Eye: Chronic Effects: No toxicity data available for this product. At elevated temperatures vapour from product may be irritating to the respiratory system. Harmful may cause lung damage if swallowed. Swallowing may cause irritation of the gastrointestinal system. Symptoms may include pain, nausea, vomiting and diarrhoea. May be irritating on skin contact. May cause irritation of the eyes. Prolonged or repeated exposure to this material may result in skin irritation leading to dermatitis. SECTION 12 Ecological Information Environmental Protection: Ecotoxicity: Avoid contaminating drains, sewer or waterways. If spill occurs do not flush away. No data is available for this material. SECTION 13 Disposal Considerations Disposal Considerations: Dispose of in accordance with Local, State, Federal and EPA regulations. Note: these regulations may differ from State to State. SECTION 14 Transport Information Transport Information: Dangerous Goods according to the Australian Code for the Transport of Dangerous Goods by Road and Rail. U.N. Number: 1950 U.N. Proper Shipping Name: Class Subsidiary Risk: Packing Group: Special Precautions for User: Hazchem Code: Action Corrosion Clear Coat Aerosol 2.1 Aerosol flammable None Allocated II Store in original closed containers. Keep cool. 3 [Y] E SECTION 15 Regulatory Information Poisons Schedule: 6 5
SECTION 16 Other Information Contact Person/ Point: Josh Burton Technical Support: T: 0414 533 960 07 55242990 6 of 5 This data sheet and health, safety and the environmental information it contains is considered to be accurate at the specified Issue Date. We have reviewed any information contained herein which we received from sources outside Action Corrosion Pty Ltd (atf JAB Trust). However, no warranty or recommendation, expressed or implied, is made as to the accuracy or completeness of the data and information contained in this data sheet. Health and safety precautions and environmental advice noted in this data sheet may not be accurate for all individuals and / or situations. It is the user s obligation to evaluate and use this product safely and to comply with all applicable laws and regulations. No statement made in this data sheet shall be construed as a permission, recommendation or authorisation given or implied to practise any patented invention without a valid licence. Action Corrosion Pty Ltd (atf JAB Trust) shall not be responsible for any damage or injury from abnormal use of the material, from any failure to adhere to recommendations, or from any hazards inherent in the nature of the material. MSDS updated august 2015 End of MSDS 6