AQ 191 A Page 1 of 5 Sika Canada Inc. MATERIAL SAFETY DATA SHEET Date: 99/09/30 App S.G.

Similar documents
AQ 191 A Page 1 of 5 Sika Canada Inc. MATERIAL SAFETY DATA SHEET Date:99/09/30 App S.G.

MATERIAL SAFETY DATA SHEET

AQ 191 A Page 1 of 5 Sika Canada Inc. MATERIAL SAFETY DATA SHEET Date:99/09/30 App S.G.

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET PRODUCT : BOMIX CONSTRUCTION SAND

COPPER REAGENT #2. Section 1: PRODUCT INFORMATION. Section 2: HAZARDOUS INGREDIENTS

CALCIUM INDICATOR LIQUID

TOTAL HARDNESS REAGENT

TOTAL HARDNESS REAGENT

CALCIUM INDICATOR LIQUID

PINK LIQUID HAND SOAP

Material Safety Data Sheet

INACTIVE - MOBIL 1 0W-40

40 40A WHITE AND PASTEL TINTS

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

DPD REAGENT #2. Section 1: PRODUCT INFORMATION. Section 2: HAZARDOUS INGREDIENTS

DPD REAGENT #3. Section 1: PRODUCT INFORMATION. Section 2: HAZARDOUS INGREDIENTS

ALCONOX - Powdered Precision Cleaner: LIQUINOX - Critical Cleaning Liquid Detergent:

M A T E R I A L S A F E T Y D A T A S H E E T Prod.ID: ================== SECTION I - PRODUCT IDENTIFICATION================

Material Safety Data Sheet

Material Safety Data Sheet. Propylene Glycol 38% Section 1: PRODUCT INFORMATION. Manufacturer: Various Manufacturers. Section 2: HAZARDOUS INGREDIENTS

MATERIAL SAFETY DATA SHEET

LIQUINOX MSDS. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION. Ingredient Name T.L.V.

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

7031 SW 22 Court, Davie, FL (866) 637-ROOF (7663) Fax: (941) Final Flat Roof MATERIAL SAFETY DATA SHEET

BESSEY SPATTER RELEASE SOLVENT BASED

LIQUID HARDENER (MEKP)

LUMINOX. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

ALVIN LAB METAL. Section 1: PRODUCT INFORMATION. Product uses: Metal patching compound. Chemtrec (24h).

20 20A WHITE AND PASTEL TINTS

MATERIAL SAFETY DATA SHEET "W" TEST SOLUTION NFPA HAZARD RATINGS* 2 Moderate health hazard 3 Highly flammable SECTION 1: PRODUCT INFORMATION

ACID DEMAND REAGENT (ADR)

BUBBLEGUM LIQUID RELEASE

MATERIAL SAFETY DATA SHEET

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H20E, Part A BILLERICA, MA 01821

Material Safety Data Sheet

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET TRAXIT % CAS# EXPOSURE LEVELS LD (50), ROUTE, SPECIES

MATERIAL SAFETY DATA SHEET PRODUCT #201

SULFURIC ACID.24N. Section 1: PRODUCT INFORMATION

BASE DEMAND REAGENT (BDR)

SAFETY DATA SHEET SECTION 1 - IDENTIFICATION

MSDS. Material Safety Data Sheet

14 FORTUNE DRIVE PRODUCT NAME: Epo Tek 320-3, Part A BILLERICA, MA 01821

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H74 UNF, Part A BILLERICA, MA 01821

ZERO VOC URETHANE REDUCER

LABTONE MSDS. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

Carcinogen: NTP (No) IARC (No) OSHA (No) DATE REVISED: 6/5/01 REV: A * HMIS CODE ratings are estimated by Epoxy Technology.

MATERIAL SAFETY DATA SHEET

DIAMOND KOTE LEATHER/VINYL RESTORER 118,6118

M A T E R I A L S A F E T Y D A T A

SECURITY COAT. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK OM125, Part A BILLERICA, MA 01821

NAME: CINNAMON OIL SDS NO. 1937

SAFETY DATA SHEET SECTION 1 - IDENTIFICATION

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Frankincense & Myrrh Fragrance Oil

Material Safety Data Sheet

Safety Data Sheet 1818BR

MATERIAL SAFETY DATA SHEET PAGE 1

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Material Safety Data Sheet

507 Rapid Set Cold Pothole Repair Material Safety Data Sheet

SAFETY DATA SHEET SECTION 1 IDENTIFICATION. MB4908 Product Line

MATERIAL SAFETY DATA SHEET PAGE 1

Material Safety Data Sheet Vanilla Bean Fragrance Oil

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET (800) (800) Category 2 Category 2A

M A T E R I A L S A F E T Y D A T A S H E E T

Safety Data Sheet - Gorilla Tape (Black, Silver, White and Camo) Date Revised: 05/21/2015 Date Issued: 05/21/2015

Material Safety Data Sheet

CHEMICAL & FERTILIZER, LLC Safety Data Sheet Section 1 Chemical Product and Company Identification

Material Safety Data Sheet

Material Safety Data Sheet

HI TEMP LAB METAL HT 14, HT 24

Material Safety Data Sheet

COLOR DYES (VARIOUS COLORS)

SDS SAFETY DATA SHEET

SUPPLIER: PRODUITS CHIMIQUES ACP CHEMICALS INC

TECH TIRE AND TUBE COMPOUND (INCL. LITE)

Material Safety Data Sheet

Material Safety Data Sheet PRODUCT CODE NUMBERS: DYND75221

MATERIAL SAFETY DATA SHEET

EMERGENCY PHONE : DATE PRINTED : 9/28/2009 INFORMATION PHONE : NAME OF PREPARER : AARON NUTTER

NAME: SENNA LEAVES SDS NO. 2649

Material Safety Data Sheet Benzaldehyde MSDS

SAFETY DATA SHEET (800) (800) Category 2 Category 2A

Page Number: 1 of

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR

Product Identification. Section 2 Hazardous Identification

Transcription:

Page 1 of 5 SECTION I: PRODUCT INFORMATION PRODUCT: Sikafloor 261 CA PART A REVISION DATE: October 2, 2007 USAGE: EPOXY COATING MANUFACTURER: SIKA CANADA INC 601, avenue Delmar Pointe Claire, QC H9R 4A9 EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666 TDG CLASSIFICATION: t Regulated WHMIS Classification: D2A UN NUMBER: Class: t Applicable Packaging Group: t Applicable SECTION II: HAZARDOUS INGREDIENTS Hazardous ingredients % T.L.V. # CAS LD 50 (mg/kg) (Species, route) LC 50 (Species, route) EPOXY RESIN 30-60 t Available 025085-99-8 > 5000(oral, rat) t Available SILICA SAND 30-60.1 mg/m 3 14808-60-7 t available t Available SECTION III: PHYSICAL CHARACTERISTICS Physical State: Paste Appearance and Odor: White paste with ether odor Odor Threshold: Evaporation Rate: t Applicable Vapor Density: Vapor Pressure: Boiling Point: Freezing Point: Density: 1,5 g/ml. Water Solubility: Very low PH: % volatility: t Applicable Water/Oil Distribution:

Page 2 of 5 PRODUCT: Sikafloor 261 CA PART A SECTION IV: FIRE AND EXPLOSION HAZARDS Flammability: If Yes, under what conditions: Extinguishing methods: Foam, dry chemical products, CO 2, water hose. TDG Flammability Class: Flammable upper limits (% vol.): Flammable lower limits (% vol.): Flash Point (method used): Auto-ignition temperature: Dangerous Combustion Products: t Regulated t Applicable t Applicable t Applicable Carbon Oxides, phenol. Special Methods: Fire fighters must wear usual protective clothing and respiratory equipment. A water hose may be used to cool the containers and dissipate the vapors. Protect from mechanical impact: Protect from static discharge: SECTION V: REACTIVITY Chemical stability: If not, under what conditions: Yes, but excessive heat will degrade the resin. Dangerous decomposition products: Phenol, carbon oxides. Incompatibility with other material: If Yes, which ones: Yes Strong acid, base, and oxidizer. Polymerization Risks: May polymerize at very high temperatures.

Page 3 of 5 PRODUCT: Sikafloor 261 CA PART A SECTION VI: TOXIC PROPERTIES ROUTE OF ENTRY / CONTACT Skin: May cause eye irritations. May be irritating to the skin, may cause sensitization. Carcinogenicity: According to the IARC, the quartz silica is a probable cause of cancer. Inhalation: May irritate lungs, may cause an allergic reaction. Toxic effects on reproduction: Ingestion: May cause irritation to the gastrointestinal system. Teratogenicity: Mutagenicity: Product with synergistic effects: An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory problems.

Page 4 of 5 PRODUCT: Sikafloor 261 CA PART A SECTION VII: PREVENTIVE MEASURES PERSONAL PROTECTIVE EQUIPMENT OTHERS Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required Respiratory equipment: t necessary under normal use. Safety glasses Shoes: Ordinary Clothing: Rubber Apron Procedure in case of leaks: Absorb with sand or other absorbent material. Residue may be removed with steam or hot water and soap. All precautions should be taken when cleaning the spill with solvent. Other: Handling and Equipment Methods: Avoid skin, eye and clothing contact Warehouse Requirements: Special Shipping Instructions: Waste Disposal: Keep all containers closed in a cool, dry area. Keep away from heat and open flame See TDG class Dispose of sand and rinse water according to municipal, provincial or federal laws for disposal of chemicals.

Page 5 of 5 PRODUCT: Sikafloor 261 CA PART A SECTION VIII: FIRST AID Skin: Inhalation: Ingestion: Remove and clean all contaminated clothing. Wash immediately with plenty of soap and water. Consult a physician if required. Rinse with water for at least 15 minutes. Consult a physician immediately. In the case of overexposure, evacuate to fresh air. Consult a physician if required. Drink plenty of water. Do not induce vomiting. Do not give anything by mouth to an unconscious person. See a physician immediately. SECTION IX: PREPARATION INFORMATION Prepared By: Steve Gosselin Telephone #: (514) 697-2610 Fax #: (514) 694-2792 tice To Reader The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material, product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone number listed in Section 1 of this MSDS. SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY OTHERS. All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.

Page 1 of 5 SECTION I: PRODUCT INFORMATION PRODUCT: Sikafloor 261 CA PART B REVISION DATE: October 2, 2007 USAGE: EPOXY RESIN COATING MANUFACTURER: SIKA CANADA INC. 601, avenue Delmar Pointe Claire, QC H9R 4A9 EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666 TDG CLASSIFICATION: Paint Related Material WHMIS Classification: E, B3 UN NUMBER: 3066 Class: 8 Packaging Group: III SECTION II: HAZARDOUS INGREDIENTS Hazardous ingredients % T.L.V. # CAS LD 50 (mg/kg) (species, route) LC 50 (species, route) EPOXY AND AMINE COPOLYMER 30-60 N.A. Mixture N.A. N.A ETHANOL 5-10 1000 ppm 64-17-5 7060 (oral, rat) 20 000/10h (inh, rat) NONYL PHENOL 3-7 N.A. 84852-15-3 580 (oral, rat) N.A. BENZYL ALCOHOL 15-40 N.A. 000100-51-6 1230 (oral, rat) 4000 mg/m 3 rat TRIDIMETHYL AMINO METHYL PHENOL 2,4,6 1-5 N.A. 90-72-2 1635 (oral, rat) N.A. SECTION III: PHYSICAL CHARACTERISTICS Physical State: Appearance and Odor: Odor Threshold: Evaporation Rate: Vapor Density: Vapor Pressure: Liquid Amber liquid, aromatic odor Boiling Point: Freezing Point: Density: Water Solubility: Partial PH: % volatility: < 10 Water/Oil Distribution:

Page 2 of 5 PRODUCT: Sikafloor 261 CA PART B SECTION IV: FIRE AND EXPLOSION HAZARDS Flammability: If Yes, under what conditions: Extinguishing methods: Special Methods: Flammable Liquid. Avoid sparks, flame and static discharge. Carbon dioxide, water fog, foam or dry chemical. Firefighters should wear full protective clothing including self-contained breathing apparatus since toxic gases are emitted. When heated in fire, explosive gas mixtures with air can form. Cool fire-exposed containers with water or water fog. TDG Flammability Class: t regulated Flammable upper limits (% vol.): 7.0 Flammable lower limits (% vol.): 1 Flash Point (method used): 42 o C (TCC) Auto-ignition temperature: Dangerous Combustion Products: Carbon monoxide, carbon dioxide and Nitrogen oxides on burning. Protect from mechanical impact: Protect from static discharge: Yes SECTION V: REACTIVITY DATA Chemical stability: If not, under what conditions Stable but avoid excessive heat, an open flame and all other ignition sources. Dangerous decomposition products: Carbon monoxide, Nitrogen oxides may be formed during combustion. Reaction with some curing agents may produce considerable heat. Incompatibility with other material: If Yes, which ones: Yes Heat, flame and contact with strong oxidizing agents. Polymerization Risks: Will not occur.

Page 3 of 5 PRODUCT: Sikafloor 261 CA PART B SECTION VI: TOXIC PROPERTIES ROUTE OF ENTRY / CONTACT May cause eye irritations. Chemical burns Carcinogenicity:. Skin: May be irritating to the skin, may cause dermatitis. May cause defatting and drying of the skin. May cause sensitization. Toxic effects on reproduction: Teratogenicity: Inhalation: May irritate the lungs, may cause central nervous system depression. May cause headaches, dizziness, and nausea. In rare cases, may cause sensitization of the heart muscle causing arrhythmia. Mutagenicity: Product with synergistic effects: t established Ingestion: May cause severe burns to the mouth, throat and stomach. May cause vomiting, dizziness, diarrhea, damages to the lungs. An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory problems. An over exposure may cause death.

Page 4 of 5 PRODUCT: Sikafloor 261 CA PART B SECTION VII: PREVENTIVE MEASURES PERSONAL PROTECTIVE EQUIPMENT OTHERS Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required. Respiratory equipment: NIOSH approved mask for organic vapor or positive pressure mask according to the area of application. Shoes: Clothing: Other: Safety glasses Leather Rubber apron Eye wash station, shower Procedure in case of leaks: Absorb with sand or other absorbent material. Residue may be removed with steam or hot water and soap. All precautions should be taken when cleaning the spill with solvent. Handling and Equipment Methods: Avoid skin, eye and clothing contact. Warehouse Requirements: Keep all containers closed in a cool, dry and well ventilated area. Keep away from heat and open flame. Special Shipping Instructions: Waste Disposal: See TDG class. Dispose of sand and rinse water according to municipal, provincial or federal laws for disposal of chemicals.

Page 5 of 5 PRODUCT: Sikafloor 261 CA PART B SECTION VIII: FIRST AID Skin: Remove contaminated clothing and shoes. Wash immediately with plenty of soap and water. Throw out shoes that were dirtied on the inside. Wash clothing before wearing again. Consult a physician if required. Rinse eyes immediately with plenty of water keeping the eyelids open in order to ensure a complete rinsing. This should last at least 30 minutes for maximum protection. Consult a physician immediately. Inhalation: In the case of overexposure, evacuate to fresh air. Consult a physician if required. Ingestion: Drink plenty of water. Do not induce vomiting. Do not give anything by mouth to an unconscious person. See a physician immediately. SECTION IX: PREPARATION INFORMATION Prepared By: Steve Gosselin Telephone #: (514) 697-2610 Fax #: (514) 694-2792 tice To Reader The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material, product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's current Technical Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone number listed in Section 1 of this MSDS. SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY OTHERS. All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacanada.com or 514-697-2610.