FFP bow mount anchor nests 208-580-1904 www.fishfighterproducts.com
relentlessly in the PURSUIT OF BIG FISH www.fishfighterproducts.com
TABLE OF CONTENTS Bow Mount Anchor Nests...Pgs. 1 Bow Mount Anchor Nests Comparison...Pgs. 2 Adjusting the Nests to Fit your Anchor...Pgs. 2 ITD5090 Dimensions...Pgs. 3 ITD5690 Dimensions...Pgs. 4 Replacement Parts...Pgs. 5 Loading Anchor... Pgs. 6-7 Rope Cleat...Pgs. 8 1-208-580-1904
bow mount anchor nests PART # DESCRIPTION ITD5090 Bow Mount Anchor Nest For 26,32, And 40 lb Breakaway River Anchors ITD5690 Extreme Duty Bow Mount Anchor Nest For 26,32, And 40 lb Breakaway River Anchors ITD5090 - Bow Mount Anchor Nest ITD5690 - Extreme Duty Bow Mount Anchor Nest 1 www.fishfighterproducts.com
Bow Mount Anchor Nests Comparison 7 5 8 " 8 7 8 " ITD5090 Bow Mount Anchor Nest ITD5690 Extreme Duty Bow Mount Anchor Nest 4 7 16 " 5" 1 3 4 " 2" CNC Machined High Density plastic rollers 1/8" Aluminum Body Injection molded hollow rollers Wrapped aluminum body in machined plastic to eliminate rope jamming/chafing 3/16" Aluminum Body Adjusting The Nest To Fit Your Anchor To adjust the anchor nest to fit your anchor, simply remove the 2 pivot bolts and set the anchor latch at the appropriate height setting 40Lb. Anchor Setting 32Lb. Anchor Setting 26Lb. Anchor Setting 2" 1 3 4 " 1 1 2 " DETAIL A SCALE 1 : 1 A Inventive LLC 1-208-580-1904 2
ITD5090 - Bow Mount Anchor Nest Dimensions 19 31 / 32 7 ⅝ 5 ⅝ 3 7 / 16 4 7 / 16 3 WARNING It is up to the installer to ensure that the Deck Mount Anchor Nest is properly installed. Test fit anchor in the nest on the boat to check anchor clearance from the bow 3 www.fishfighterproducts.com
ITD5690 - Extreme Duty Bow Mount Anchor Nest Dimensions 20 5 / 16 8 ⅞ 5 ⅝ 3 ½ 5 3 WARNING It is up to the installer to ensure that the Deck Mount Anchor Nest is properly installed. Test fit anchor in the nest on the boat to check anchor clearance from the bow 1-208-580-1904 4
Replacement Parts Hardware Included (4) - 5/16 Nylon Washer (2) - 1/4 20 X 1 SS Cap Screw (2) - 1/4-20 SS Nylock 1 2 Bow Mount Anchor Nests Item # Part # Description 1 ITD5573 Anchor Latch with Rubber Bumpers (Includes Mounting Hardware, fits both styles of anchor nests) 2 ITD5574 Lock Bar with Handle,Lynch clip, and Lanyard Installing Replacement Lanyard Lock Bar 12-1/32 SS Wire Rope Lanyard Sleeve (Crimp with Pliers) Lanyard Sleeve (Crimp with Pliers) 5 www.fishfighterproducts.com
Loading Anchor Pull Lynch pin from Lock Bar Pull Lock Bar from Anchor nest Open Anchor Latch Retrieve Anchor with the chain facing up WARNING Observe any and all local and state regulations regarding operating watercraft Do not anchor in swift currents except in emergency situations. Once the Anchor has been retrieved and put into the nest, close the anchor latch 1-208-580-1904 6
Replace Lock bar Replace Lynch Pin to lock anchor in place WARNING It is highly recommended that all passengers wear a life persevering safety jacket while aboard any operating water vessel. tech tip Install an extra zip tie to the top of the anchor to help from anchor from binding on anchor nest while retrieving the anchor 7 www.fishfighterproducts.com
Rope Cleat The Bow Mount Anchor Nests have been designed with a built in rope cleat. This rope cleat will fit rope from 3/8 to 1/2. The rope cleat has a 1,000 lb working load limit 1-208-580-1904 8
FFP bow mount anchor nests For full warranty information visit www.fishfighterproducts.com Fish Fighter Products Support 8:00 am to 5:00 pm MST Monday through Friday 1-208-580-1904 sales@fishfighterproducts.com FF0067