SPORTS UNIFORM STYLE GUIDE arc.unsw.edu.au/sport 1
As a UNSW Club, every time you wear your club kit, you are representing the university and ArcSport, whether it s at training, competition or social events. The following style guide will ensure every club representing the university has professional and consistent apparel.
Colours When designing any training, competing or general merchandise, please always use these three colours: UNSW Yellow PMS 108 White Fonts Black Arial MT or Somment are the only fonts to be used. Client: Client Number: Style: Style Type: Pattern: Colours: Please refer to S-Trend colour chart for a tru Design Mandatories Classic Styling Block Colours 25 Degree Angle as per UNSW brand If contrasting jersey is needed (i.e. Goal Keeper) please use the following green: PMS 368 25 Degree Angle Classic SUBLIMATED SUBLIMATED SUBLIMATED SUBLIMATED SUBLIMAT CENTRE FRONT CM TALL RIGHT CHEST 10CM WIDE LEFT CHEST 8.5CM WIDE FRONT CHEST CM WIDE TOP BAC 23CM WID AS PER LOGO AS PER LOGO AS PER LOGO 2 Block Colours Goalie
UNSW Crest This logo encompasses the UNSW Crest and the club name underneath. To obtain logo please email: g.ferguson@arc.unsw.edu.au Handball NB: Allow up to three weeks for the logo to be designed. The crest must be on the front, top right hand side of apparel. 70mm high from the top of the crest to the base of the word club. Colour Colour UNSW Crest is to be used when embroidering, Black or white print when screen printing. Arc Sport Logo To obtain logo please email g.ferguson@arc.unsw.edu.au The logo must be on the front, top left hand side of apparel. 45mm high 3
Shorts Black with white UNSW logo. Logo must be placed bottom right hand side of apparel. 60mm high Socks Black socks with optional yellow detail. No logo on the socks. 4
Swim Wear Black swimwear with UNSW logo. Swimming Caps Black cap with white UNSW logo. Logo to be located on the front 40mm wide Speedos & Swim Suit Black swimwear Front: Yellow Arc Sport logo Back: full colour or White UNSW logo Front: Right hip Back: Middle of the bottom Front: 40mm wide Back: 150mm wide Colour Full colour UNSW Crest is to be used when using sublimation printing, Black or white print when screen printing. Club and team logos and names may be added to swimwear pending approval from Arc Sport 5
Sponsors/Partners All additional logos from agreed sponsors or partners can be place at an appropriate area on the back or sleeves of the apparel. Approval ALL uniforms and general merchandise must be submitted to Arc Sport for approval BEFORE production can take place. Therefore, please email Gemma with your final draft of uniforms and it can be approved by marketing. Assistance The marketing department within Arc are available for assistance for kit and merchandise design. Please request this job 4 weeks in advance of the approval deadlines (4 weeks before production deadline.) 6 Recommended Supplier S-Trend is our recommended supplier that we encourage clubs to use. we strongly encourage you to contact S-Trend to get quotes and samples. S-Trend, We believe, has a great balance between affordable quality sportswear and great customer service. Therefore we trust that you will have a positive experience using their services. As our official Unigames Supplier, they will already know the requirements needed for your apparel. The only additional logo you will need to provide is the UNSW Crest logo which includes the club name. S-Trend also creates original designs, so you can get an old design remade or else change it to something different. As with all uniform jobs, this still needs to be approved with marketing, So please send your final uniform design through to ArcSport via Gemma at g.ferguson@arc.unsw.edu.au to get final approval. Contact: charles@s-trend.com.au
arc.unsw.edu.au/sport 7