MATERIAL SAFETY DATA SHEET. fill in your phone numbers SECTION 1 PRODUCT INFORMATION SECTION 2 INGREDIENTS

Similar documents
American Plant Food Corporation

Material Safety Data Sheet

BASF Corporation. Material Safety Data Sheet

Safety Data Sheet Page: 1. Section 3 HAZARDS IDENTIFICATION Emergency Overview

Page : 1 Original Date: 06/04/1997 Revision Date: 12/13/2002 BASF CORPORATION 3000 CONTINENTAL DRIVE

Page : 1 Original Date: 09/18/1996 Revision Date: 08/06/2002 BASF CORPORATION 3000 CONTINENTAL DRIVE

Page : 1 Original Date: 10/13/1992 Revision Date: 02/04/2003 BASF CORPORATION 3000 CONTINENTAL DRIVE NORTH

Material Safety Data Sheet

Safety data sheet Finished Foam - Article Revision date : 2006/08/28 Page: 1/5

Material Safety Data Sheet

MSDS ELASTOCAST 70110R RESIN

Material Safety Data Sheet

Safety data sheet Finished Foam - Article Revision date : 2007/05/18 Page: 1/5

BASF Corporation. Material Safety Data Sheet

Material Safety Data Sheet Product No Cresyl Violet Acetate, Certified. Issue Date ( ) Review Date ( )

MATERIAL SAFETY DATA SHEET MSDS DATE: 9/3/ Surfactant SUPERSEDES: None

Safety Data Sheet. BOSS 139 Hi-Temp Mortar. Section 1. Identification. Section 2. Hazards Identification. Synonyms Manufacturer Stock Numbers

Material Safety Data Sheet

Material Safety Data Sheets for Cured Bullet Liner Material

CYCLO INDUSTRIES, INC MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Product No Colloidal Silica Suspension, 0.06µm

SAFETY DATA SHEET (SDS) Stick-It! Rear View Mirror Adhesive

GAF Safety Data Sheet SDS # 2104 SDS Date: December 2014

SAFETY DATA SHEET S415L VER 15-1 DATE: 8/17/15 SW

MATERIAL SAFETY DATA SHEET Certis USA 9145 Guilford Road, Suite 175 Columbia, Maryland 21046

Safety Data Sheet. AB Page 1 of 6 January 01, Relevant routes of exposure: Eye contact, skin contact, inhalation, ingestion

HMIS Rating. Material Safety Data Sheet Bomanite Surface Deactivator. Revision Date: Version: 1

Safety Data Sheet Jacquard Discharge Paste

MATERIAL SAFETY DATA SHEET C-MUL SUN DRILLING PRODUCTS CORP.

MATERIAL SAFETY DATA SHEET MSDS DATE: 8/14/12

Material Safety Data Sheet

Material Safety Data Sheet

Armstrong S99 Floating Floor Tongue and Groove Adhesive

SECTION 1. Product and Company Identification TRAP N'TOSS ATTRACTANT. SECTION 2. Composition/Information on Ingredients TRAP N'TOSS ATTRACTANT

Safety Data Sheet Roadranger GREASE EP-2 Revision date : 2011/06/20 Page: 1/6

Kinetics Noise Control MATERIAL SAFETY DATA SHEET

Safety Data Sheet Bruce Everbond Engineered Wood Flooring Adhesive Revision date: September 30, 2016 Version: 2

MATERIAL SAFETY DATA SHEET

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Hydrochloric acid % %

Safety Data Sheet Product No Tissue-Tack Adhesive Issue Date ( ) Review Date ( )

Safety Data Sheet Revised 16 November 2015

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET B-415 VER 15-1 DATE: 3/31/15 24 HOUR TELEPHONE NUMBER (CHEMTREC)

Material Safety Data Sheet

M A T E R I A L S A F E T Y D A T A S H E E T

Safety Data Sheet S-599 ChoiceStrong TM Commercial Vinyl Sheet & Residential LVT Adhesive

MATERIAL SAFETY DATA SHEET MSDS DATE: 3/13/12

MATERIAL SAFETY DATA SHEET FILE NO.: 378 NAME OF PRODUCT BIO-STAT MSDS DATE: 12 /18 /06

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET MSDS DATE: 7/08/09 SCENT WINTERGREEN SUPERSEDES: 6/23/08

Thoroseal Waterproofing Paint

Safety Data Sheet THE MODERN FLOORING SOLUTION. Urban Surfaces Residential Pressure Sensitive Adhesive

Material Safety Data Sheet

PRODUCT AND COMPANY IDENTIFICATION

Version /08/2003

MATERIAL SAFETY DATA SHEET

M a t e r i a l S a f e t y D a t a S h e e t

Safety Data Sheet Revised 16 November 2015

CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Chad Labs Corporation USA

NewLook International, Inc. Mean Klean Concrete Dissolver. Safety Data Sheet. Section 1 Product and Company Identification:

*MATERIAL SAFETY DATA SHEET*

M A T E R I A L S A F E T Y D A T A S H E E T

Safety Data Sheet Bentley Healthbond 3000 Seam Sealer

RESOLUTE (MS+ RESILIENT) Premium Multi-Function Adhesive for Resilient Flooring

M A T E R I A L S A F E T Y D A T A S H E E T

NewLook International, Inc. ProtéShield. Safety Data Sheet. Section 1 Product and Company Identification: Section 2 Hazards Identification:

SAFETY DATA SHEET. AccuStandard, Inc SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Identifiers

Material Safety Data Sheet

BOSS LUBRICANTS: MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Date Prepared: Revision: F, Revision Date: SECTION I

Rest Easy SECTION 1 - IDENTIFICATION SECTION 2 - INGREDIENTS. The remaining components of this product comprise proprietary information.

1. PRODUCT IDENTIFICATION 2. COMPOSITION / INFORMATION ON HAZARDOUS INGREDIENTS

Safety Data Sheet S-288 Flooring Adhesive

OSHA regulated. NE NE No No No. NE NE No No No

Safety data sheet decolourant Revision date :5/6/2015 Page: 1

Material Safety Data Sheet Product No PELCO CryO-Z-T Issue Date ( ) Review Date ( )

TAYLOR. Safety Data Sheet 2033 Clear Thin Spread VCT Tile Adhesive. Revision date: Oct. 27, Version: Identification

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. AK Page 1 of 6 January 01, Appearance/Odor: Thick, viscous, white to off-white liquid with a mild ammonia odor

Gelatin ( ) 100 NE NE No No No

Material Safety Data Sheet SANTOLUBES LLC SANTOTRAC, SANTOVAC, SANTOLUBES, AND SYNERGY P.O. Box 960 St. Charles, MO

MATERIAL SAFETY DATA SHEET WIZARDS METAL POLISH MSDS DATE: 7/31/2010

1. Chemical Product and Company Identification. 2. Hazardous Ingredients. 3. Hazards Identification

Air Tool Lubricant MSDS. Air Tool Lubricant. (800) (Poison Control USA) 24 Hours (800) (CHEMTREC) 24 Hours. Not Applicable - Mixture

Material Safety Data Sheet

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET FILE NO.: 4110 NAME OF PRODUCT: HI-LITE SOLUTIONS PAINT PREP CLEANER MSDS DATE: 03/10/2010

Transitional Pressure Sensitive Vinyl and Adhesive

The RectorSeal Corporation Chemtrec 24 Hours 2601 Spenwick Drive (800) Houston, Texas USA

MATERIAL SAFETY DATA SHEET

The RectorSeal Corporation Chemtrec 24 Hours 2601 Spenwick Drive (800) Houston, Texas USA

Silver ( )* ~ ND No No No Arcosolve PM ( ) Toluene ( ) ** 200 PPM 20 PPM No 3 No ** 1000 PPM

Version /28/2006

THE ANDERSONS SAFETY DATA SHEET DATE PREPARED: 01/25/07 CURRENT AS OF: 6/2/15

Material Safety Data Sheet

1. Chemical Product and Company Identification

Material Safety Data Sheet

Material Safety Data Sheet

Transcription:

1 MATERIAL SAFETY DATA SHEET Monolithic Address City, state, zip EMERGENCY PHONE #s: fill in your phone numbers SECTION 1 PRODUCT INFORMATION MONOFORM Common Chemical Name: Synonyms: Molecular Formula: Chemical Family: Molecular Weight: ACRYLATE COPOLYMER DISPERSION NONE MIXTURE POLYMER DISPERSION NOT APPLICABLE SECTION 2 INGREDIENTS Chemical Name: CAS Amount POLYMER 28063-87-8 64.0 66.0% PEL/TLV NOT ESTABLISHED WATER 7732-18-5 34.0 36.0% PEL/TLV NOT ESTABLISHED ACRYLONITRILE 107-13-1 < 10.0 PPM ACGIH TLV SKIN TWA 2 PPM OSHA PEL CEIL 10 PPM TWA 2 PPM BUTYL ACRYLATE 141-32-2 < 200.0 PPM ACGIH TLV TWA 2 PPM VINYL ACETATE 108-05-4 < 0.4 % ACGIH TLV STEL 15 PPM TWA 10 PPM FORMALDEHYDE 50-00-0 < 100.0 PPM ACGIH TLV CEIL 0.3 PPM OSHA PEL STEL 2 PPM TWA 0.75 PPM SECTION 3 HAZARDS IDENTIFICATION Emergency Overview Color: Milky White Form/Appearance: Aqueous Dispersion Odor: Ester

2 WARNING STATEMENT: CAUTION: INHALATION OF VINYL ACETATE AT HIGH LEVELS MAY BE IRRITATING TO THE EYES, MUCOUS MEMBRANES AND RESPIRATORY TRACT AND PRODUCE CNS EFFECTS. REPEATED INHALATION EXPOSURES HAVE PRODUCED NASAL AND PULMONARY IRRITATION AND LESIONS AT LEVELS UP TO 600 PPM IN EXPERIMENTAL ANIMALS. IARC CLASSIFIED VINYL ACETATE UNDER GROUP 2B AS POSSIBLY CARGINOGENIC TO HUMANS BASED ON ITS RAPID HYDROLYSIS TO ACETALDEHYDE, AND BASED ON THE EVIDENCE THAT BOTH VINYL ACETATE AND ACETALDEHYDE INDUCE NASAL CANCERS AFTER INHALATION EXPOSURES AND ARE GENOTOXIC. CONTACT WITH THE EYES AND SKIN MAY RESULT IN IRRITATION. INHALATION MAY RESULT IN RESPIRATORY IRRITATION. INGESTION MAY RESULT IN GASTRIC DISTURBANCES. POTENTIAL HEALTH EFFECTS Primary Routes of Exposure: Routes of entry for solids and liquids include eye and skin contact, ingestion and inhalation. Routes of entry for gases include inhalation and eye contact. Skin contact may be a route of entry for liquefied gases. Acute Overexposure Effects: Contact with the eyes and skin may result in irritation. Inhalation of vinyl acetate at high concentrations may be irritating to the eyes, mucous membranes and respiratory tract and may result in CNS effects. Chronic Overexposure Effects: Repeated inhalation exposures of vinyl acetate have produced nasal and pulmonary irritation and lesions at concentrations up to 600 ppm in experimental animals. IARC classified vinyl acetate under Group 2B as possibly carcinogenic to humans based on its rapid hydrolysis to acetaldehyde, and based on the evidence that both acetate and acetaldehyde induced nasal cancers after inhalation exposures and are genotoxic. First Aid Procedures Aggravated Medical Conditions No data is available which addresses medical conditions that are generally recognized as being aggravated by exposure to this product. Please refer to the effects of overexposure section for effects observed in animals. SECTION 4 FIRST AID MEASURES First Aid Procedures Skin: Wash affected areas with soap and water. Remove and launder contaminated clothing before reuse. If irritation develops, get medical attention. First Aid Procedures Eyes: Immediately rinse eyes with running water for 15 minutes. If irritation develops, get medical attention.

3 First Aid Procedures Ingestion: If swallowed, dilute with water. DO NOT INDUCE VOMITING. Never give fluids or induce vomiting if the victim is unconscious or having convulsions. Get immediate medical attention. First Aid Procedures Inhalation: Move to fresh air. Aid in breathing, if necessary, and get immediate medical attention. First Aid Procedures Notes to Physicians: None known. First Aid Procedures Aggravated Medical Conditions: No data is available which addresses medical conditions that are generally recognized as being aggravated by exposure to this product. Please refer to the effects of overexposure section for effects observed in animals. First Aid Procedures Special Precautions: None. SECTION 5 FIRE FIGHTING MEASURES Typical Low/High Deg. Method Flash Point: > 300 F NOT SPECIFIED Auto ignition: NOT AVAILABLE Extinguishing Media: Use water fog, foam or dry chemical extinguishing media. Fire Fighting Procedures: Firefighters should be equipped with self-contained breathing apparatus and turn out gear. Water may be ineffective but should be used to keep exposed containers cool. Unusual Hazards: There are no known unusual fire or explosion hazards. SECTION 6 ACCIDENTAL RELEASE MEASURES General: Spills should be contained, solidified and placed in suitable containers for disposal in a licensed facility. This material is regulated by CERCLA ( Superfund ). General: Protect from freezing. SECTION 7 STORAGE AND HANDLING SECTION 8 PERSONAL PROTECTION Clothing: Gloves, coveralls, apron, and boots as necessary to prevent contact.

4 Eyes: Chemical goggles; also wear a face shield if splashing hazard exists. Respiration: If vapors or mists are generated, wear a NIOSH/MSHA approved organic vapor/mist respirator or an air-supplied respirator as appropriate. Ventilation: Use local exhaust to control to recommended P.E.L. Explosion Proofing: None required. SECTION 9 PHYSICAL PROPERTIES Color: Form/Appearance: Odor: Odor Intensity: Slight Milky White Aqueous Dispersion Ester Typical Low/High U.O.M. Specific Gravity: ~ 1.05 @ 68 DEG. F Viscosity: 400 CENTIPOISE @ 73 DEG. F ph: 4 5 SU Typical Low/High Deg. @ Pressure Boiling Point: ~212 F 760 MM HG Freezing Point: ~ 32 F 760 MM HG Decomposition Temperature: NOT AVAILABLE Solubility in Water Description: Miscible Vapor Pressure: 17 MM HG @ 68 DEG. F SECTION 10 STABILITY AND REACTIVITY Stability Data: Stable Incompatibility: Metal salts will coagulate product. Conditions/Hazards to Avoid: Excessive heat. Hazardous Decomposition/Polymerization: Hazardous polymerization will not occur. Hazardous Decomposition Products: CO, CO2, Nox, hydrocarbons. Corrosive Properties: Not corrosive. Oxidizer Properties: Not an oxidizer.

5 SECTION 11 TOXICOLOGICAL INFORMATION No applicable data for this section. No applicable data for this section. SECTION 12 ECOLOGICAL INFORMATION SECTION 13 DISPOSAL CONSIDERATIONS Waste Disposal: Incinerate in a licensed facility. Do not discharge into waterways or sewer systems. Container Disposal: Dispose of in a licensed facility. Recommend crushing or other means to prevent unauthorized reuse. SECTION 14 TRANSPORTATION INFORMATION DOT Proper Shipping Name: DOT Technical Name: DOT Primary Hazard Class: DOT Secondary Hazard Class: DOT Label Required: DOT Placard Required: DOT Poison Constituent: Bill of Lading Description: NOT REGULATED BY THE DEPARTMENT OF TRANSPORTATION SECTION 15 REGULATORY INFORMATION TSCA Inventory Status Listed on Inventory: YES SARA 313 Listed Chemicals: CAS: 108-05-4 AMOUNT: 0.4 % NAME: VINYL ACETATE

6

7 RCRA Haz. Waste No.: CERCLA: REPORTABLE QUANTITY: VINYL ACETATE* - 5000 LBS *RESIDUAL MONOMER IN PRODUCT State Regulatory Information: (By Component) NJ/PA/MA RTK CAS: 108-05-4 YES NAME: VINYL ACETATE CAS: 7732-18-5 YES NAME: WATER CAS: 28063-87-8 YES NAME: POLYMER This product contains one or more chemicals known to the State of California to cause cancer. SECTION 16 OTHER INFORMATION Hazard Ratings: UCSC currently uses the National Paint & Coating Association (NPCA) rating system. The use of an asterisk (*) in the HMIS rating indicates the potential for chronic health effects. Health: Fire: Reactivity: Special: HMIS 2* 1 0 This product is hazardous or contains components which are hazardous according to the OSHA Hazard Communication Standard. IMPORTANT: WHILE THE DESCRIPTIONS, DESIGNS, DATA AND INFORMATION CONTAINED HEREIN ARE PRESENTED IN GOOD FAITH AND BELIEVED TO BE ACCURATE, IT IS PROVIDED FOR YOUR GUIDANCE ONLY. BECAUSE MANY FACTORS MAY AFFECT PROCESSING OR APPLICATION/USE, WE RECOMMEND THAT YOU MAKE TESTS TO DETERMINE THE SUITABILITY OF A PRODUCT FOR YOUR PARTICULAR PURPOSE PRIOR TO USE. NO WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERECHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE PRODUCTS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE. FURTHER, YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE DESCRIPTIONS, DESIGNS, DATA, AND INFORMATION FURNISHED BY UCSC HEREUNDER ARE GIVEN GRATIS AND UCSC ASSUMES NO OBLIGATION OR LIABILITY FOR THE DESCRIPTION,

DESIGNS, DATA AND INFORMATION GIVEN OR RESULTS OBTAINED, ALL SUCH BEING GIVEN AND ACCEPTED AT YOUR RISK. 8