hapter - Pressure Regulators Pressure range onnection thread Device Page 3 mm, high precision 0.0 2 / 8 bar G 1 8 RI.02 highly sensitive, max. 3 bar supply pressure 0.002 0.12 / 31 bar ¼"NPT R40.03 without constant bleed 0.01 1 / 16 bar R217.04 without constant bleed, large diaphragm 0.01 0.6 / 3. bar, G 3 8 R216.0 high accuracy up to 30 mbar 0.02 0. / 10 bar 11-818.06 high accuracy up to mbar 0.14 1.7 / 8 bar, ¼"NPT 3.10.07 supply pressure 3 bar 0.01 0.14 / 28 bar - G½ 10.08 many variations 0.01 0.14 / 10 bar - G½ R230.09 small design 0.001 0.14 / 7 bar, G 3 8 R300.10 without constant bleed 0.03 0.7 / 10 bar, G 3 8 R100.11 high flow rate and exhaust 0.01 3 / 10 bar - G½ R03.12 without constant bleed, high precision 0.03 0.7 / 17 bar G 3 8, G¾ R400.13 high flow rate 30.000 l/min 0.001 0.7 / 10 bar G1, G1½ R102.14 Pressure Regulators.01
Miniature Pressure Regulator 3 mm RI Diaphragm precision pressure regulator of very small design and low air consumption Supply pressure max. 10 bar ccuracy response sensitivity: ± 0.2 % FS reproducibility: ± 0, % FS ir consumption max. l/min at 10 bar supply pressure. onsumption depends on supply pressure. by handwheel with locknut Relieving function relieving Gauge port G 1 8 on both sides of the body, screw plug supplied Mounting position any Temperature range 0 to 60 / 32 F to 140 F Material ody: zinc die-cast Elastomer: NR/una-N Inner valve: stainless steel and brass G 1 8 Dimensions Flow Supply onnection Pressure Order Price rate pressure thread range number mm mm mm l/min* 1 max. bar G bar regulator supply pressure max. 10 bar, relieving, with constant bleed, with mounting nut 3 90 10 200 10 G 1 8 0.0... 2 RI-01 89,00 RI 0.0... 4 RI-01 89,00 0.0... 8 RI-01 89,00 pressure Ø 23 mm, 0 * 2 bar, G 1 8 M2301-.. * 2 11,00 mounting bracket made of steel, mounting nut at the device W10-02,00 RI-01, with mounting nut accessory: constant bleed exhaust 28 R4.2 G 1 8 R2.2 1 9 26 RI W10-02 * 1 for compressed air: 7 bar supply pressure, 6 bar pressure and 1 bar pressure drop * 2 04 = 0 4 bar, 10 = 0 10 bar RI-01.02
Pressure Regulator / ooster with Excellent Pressure Stability Nullmatic R40 Highly sensitive, two-step precision pressure regulator working in the flapper-nozzle principle. Solid construction for low-maintenance operation with. ooster version In option version the regulator can also be controlled by pilot pressure up to 7 bar in addition to range spring control. Thereby the regulator becomes a volume booster with double loop, parallel zero point shift Supply pressure minimum: 0.3 bar above pressure maximum: see chart ir consumption onstant bleed only when flow is circulating. The greater the difference between supply and pressure the greater ist the air consumption, e.g. 9 bar and 7 bar resulting in 3 l/min air consumption. Exhaust 0 l/min at 1.7 bar pressure and 20 mbar overpressure to pressure Pressure stability 10 mbar pressure drop when changing flow rate from "0" to "max". Setting accuracy < 0.03 % pressure. Ten adjusting knob turns for the setting of the whole adjustment range. Gauge port 1 4 NPT on both sides, screw plugs supplied Temperature range Operating pressure : -4 to 80 / 2 F to 176 F Storage temperature: -20 to 100 / -4 F to 212 F Temperature sensitivity 1 % pressure deviation at temperature change of 30 K, 0.1 % deviation for isotherm spring (please inquire) Material fluid-contact: brass, stainless steel, neoprene, aluminium and zinc 2 120 mbar / 1 31 bar 1 4 NPT Dimensions Flow supply pressure onnection Pressure Order Price height Ø rate recommended max. thread range number D mm mm l/min* 1 bar* 2 bar NPT mbar / bar regulator Nullmatic Kv = 0.16 Kv = 0.66 for version "H" R40 189 86 300 0.7 1.7 1 4 2...120 mbar R40-2 60,00 189 86 300 3. 7 1 4 10...00 mbar R40-7 60,00 189 86 300 10 1 4 0.03... 1 bar R40-1 60,00 189 86 300 8 10 1 4 0.07... 2 bar R40-30 60,00 189 86 300 8 10 1 4 0.07... 3. bar R40-0 60,00 189 86 1200 8 10 1 4 0.07... 3. bar R40-0H 60,00 189 86 300 10 3 1 4 0.1... 7 bar R40-100 60,00 189 86 1200 10 3 1 4 0.1... 7 bar R40-100H 730,00 192 86 300 17 3 1 4 0.2... 14 bar R40-200 730,00 192 86 300 24 3 1 4 0.... 21 bar R40-300 730,00 192 86 300 3 3 1 4 1... 31 bar R40-40 70,00 R40 volume booster version: up to max. 7 bar pilot pressure R40-... +180,00 pressure Ø 0 mm, 0 * 2 bar, M002-..* 2 9,0 connectors for NPT ports, adapter ¼ NPT to female VP-0202N 6,00 mounting bracket W20-02 40,00 60 Ø 7 pressure max. flow rate l/min panel mounting max. 6 mm thickness booster version (71) 30 7 W20-02 connection for booster version 134 > 14 bar(+3) port 1 4 NPT pressure max. flow rate l/min supply pressure restriction Ø 86 cleaning wire R40 * 1 at 7 bar supply pressure, 1.7 bar pressure and 20 mbar pressure drop * 2 lowest pressure will only be reached when applying the recommended pressure R40-2 supply pressure.03
Regulator without onstant leed, up to 16 bar Outlet Pressure R217 Diaphragm pressure regulator with good regulation accuracy at varying volume flow. Supply pressure max. 16 bar ir consumption without constant bleed by handwheel with locknut, suitable for panel mounting Relieving function relieving Gauge port on both sides of the body, one screw plug supplied Mounting position any Temperature range 0 to 80 / 32 F to 176 F Material ody: zinc die-cast O-ring: NR/una-N Spring cage: zinc die-cast ottom screw: POM Diaphragm: FKM, up to 16 bar 600 l/min Dimensions K v - Flow onnection Pressure Order Price value rate thread range number D pressure regulator supply pressure max. 16 bar, relieving, without constant bleed R217 82 148 20 0.3 36 600 0.01 1 R217-02 7,00 0.20 3 R217-02 7,00 0.40 6 R217-02 7,00 0.0 10 R217-02D 7,00 0.70 16 R217-02E 7,00 free of grease and oil specially cleaned R217-0..L +20,00 pressure Ø 63 mm, 0 * 2 bar, M6302-..* 2 10,0 mounting bracket made of steel W00-36 10,00 R217 with mounting nut 20 panel cut-out G 1 4 Ø9 8 18 4 R217 W00-36 * 1 at 8 bar suppy pressure, 6 bar pressure und 1 bar pressure drop * 2 01 = 0 1 bar, 04 = 0 4 bar, 06 = 0 6 bar, 10 = 0 10 bar, 16 = 0 16 bar R217-02.04
Regulator without onstant leed, up to 3. bar Outlet Pressure R216 Diaphragm pressure regulator with good regulation accuracy at varying volume flow, especially at low pressure. Supply pressure max. 21 bar ir consumption without constant bleed by T-handle with locknut, mounting bracket not possible by handwheel with locknut, suitable for panel mounting Relieving function relieving, optionally non-relieving Gauge port G 1 8 on the bottom side of the body, one screw plug supplied Mounting position any Temperature range 0 to 0 / 32 F to 122 F for handwheel version 0 to 80 / 32 F to 176 F for T-handle version for appropriately conditioned compressed air down to -30 / -22 F Material ody: zinc die-cast Elastomer: NR/una-N Spring cage: aluminium ottom screw: brass and G 3 8 70 l/min Dimensions Kv- Flow onnection Pressure Order Price value rate thread range number D mm mm mm by (m ³ /h) m ³ /h* 1 l/min* 1 G bar pressure regulator supply pressure max. 21 bar, relieving, without constant bleed R216 108 162 32 T-handle 0.39 42 700 0.01 0.6 R216-02E 82,00 0.01 1.6 R216-02F 82,00 0.01 3. R216-02H 82,00 0.42 4 70 G 3 8 0.01 0.6 R216-03E 82,00 0.01 1.6 R216-03F 82,00 0.01 3. R216-03H 82,00 108 162 32 handwheel 0.39 42 700 0.01 0.6 R216-02EP 102,00 for panel 0.01 1.6 R216-02FP 102,00 mounting 0.01 3. R216-02HP 102,00 0.42 4 70 G 3 8 0.01 0.6 R216-03EP 102,00 0.01 1.6 R216-03FP 102,00 0.01 3. R216-03HP 102,00 R216-02F non-relieving without relieving function R216-0.. K + 2,0 NPT connection thread R216-0.. N +10,00 free of oil and grease specially cleaned R216-0.. L +20,00 pressure Ø 63 mm, 0 *2 bar,, connection parts required M6302-.. *2 10,0 connection parts for pressure M-02,00 mounting bracket made of steel, mounting nut at the device for R216-0..P W20-02 3,00 R216-02FP for panel mounting R216 G 1 8 60 Ø7 16 16 30 G 1 8 76 R216- P panel cut-out W20-02 * 1 at 7 bar supply pressure and 3 bar pressure * 2 01 = 0 1 bar, 02 = 0 2. bar, 04 = 0 4 bar R216-02E.0
Pressure Regulator 11-818 pressure regulator designed for precise pressure control in the event of changes in flow and supply pressure. Due to constant bleed slight blow-off sounds existing. dry, oil-free and 2 μm filtered compressed air Supply pressure max. 8 bar for 0.02...0. bar, max. 10 bar for 0.07 4 bar, max. 14 bar for 0.4...10 bar ccuracy at varying supply pressures: < 20 mbar pressure deviation at varying volume flows: < 30 mbar pressure deviation at / K temperature variation: < 3 mbar pressure deviation ir consumption max. 2 l/min, subject to pressure by handwheel for panel mounting, optionally by spindle Relieving function relieving, 3 mm exhaust diameter Gauge port on both sides of the body, optionally without port Mounting position any Temperature range 0 to 70 / 32 F to 18 F, for appropriately conditioned compressed air down to -30 / -22 F Material ody: zinc die-cast Inner valve: brass, plastic Elastomer: NR/una-N, 280 l/min Dimensions Supply Flow onnection Pressure Order Price max. rate thread range number D mm mm mm bar l/min* 1 G bar supply max. 8 / 10 / 14 bar, relieving, with constant Precison pressure regulator bleed, accurcay < 30 mbar, K V = 0.16 m 11-818 3 /h 137 13 handwheel, 8 280 0.02 0. 11-818-999 142,00 w/o port 10 0.07 4.0 11-818-100 142,00 14 0.40 10 11-818-110 142,00 137 13 handwheel, 8 280 0.02 0. 11-818-987 142,00 with port 10 0.07 4.0 11-818-993 142,00 14 0.40 10 11-818-991 142,00 137 13 spindle, 8 280 0.02 0. 11-818-998 142,00 w/o port 10 0.07 4.0 11-818-101 142,00 14 0.40 10 11-818-112 142,00 tamper-proof cap made of brass, adjustment by screwdriver, total height 108 mm 11-818-...T +10,00 11-818-100 pressure Ø 0 mm, 0 * 2 bar, M002-..* 2 9,00 mounting bracket made of steel, mounting nut at the device W12-01 10,00 tamper-proof cap for metal sheet thickness from 2. up to 6 mm 3081-01 1,00 16 Ø. 17 9 2 10 11-818 W12-01 tamper-proof cap * 1 at 7 bar supply pressure and 1.4 bar pressure * 2 01 = 0 1 bar, 04 = 0 4 bar, 10 = 0 10 bar 11-818-999.06
High Pressure Regulator, ccurate to mbar 3.10 / 3.13 Regulator of proven reliability and durability designed for precise pressure regulation in the event of changes in flow, supply pressure and temperature. Slight exhaust sounds are normal. Note To avoid leaks the mounting nut must be screwed tight. dry, oil-free and 2 μm filtered compressed air Supply pressure max. 10 bar ccuracy at varying supply pressures: < 1 mbar pressure deviation at varying volume flows: < mbar pressure deviation ir consumption max. 2 l/min, subject to pressure by handwheel with locknut, for panel mounting Mounting position any Relieving function relieving, the exhaust valve's diameter is six times greater than the regulating valve s diameter Gauge port or ¼ NPT on both sides of the body, identical with the connection thread Temperature range 0 to 70 / 32 F to 18 F, for appropriately conditioned compressed air down to -30 / -22 F Material ody: zinc die-cast Measuring capsule: beryllium copper Elastomer: NR/una-N and ¼ NPT 280 l/min Dimensions Kv- Flow onnection Pressure Order Price value rate thread range number D mm mm mm (m ³ /h) m ³ /h* 1 l/min* 1 G/NPT bar Precison pressure regulator supply pressure max. 10 bar, relieving, with constant bleed, accuracy mbar Manostat 4 70 14 standard 0.16 17 280 0.14 1.7 3.1002.4X 160,00 0.14 4.0 3.1002.X 160,00 0.14 8.0 3.1002.6X 160,00 4 70 14 standard 0.16 17 280 ¼ NPT 0.14 1.7 3.1002.00 160,00 0.14 4.0 3.1003.00 160,00 0.14 8.0 3.1004.00 160,00 4 70 14 with gear 6:1 0.16 17 280 ¼ NPT 0.14 1.7 3.1002.96 189,00 0.14 4.0 3.1003.96 189,00 0.14 8.0 3.1004.96 189,00 4 70 14 tapped 0.16 17 280 ¼ NPT 0.14 1.7 3.1302.00 220,00 exhaust 1 8 NPT 0.14 4.0 3.1303.00 220,00 0.14 8.0 3.1304.00 220,00 3.1002.6X tamper-proof cap aluminium, adjustment by screwdriver, total height 109 mm 3.1.....T +10,00 pressure Ø 0 mm, 0 * 2 bar, M002-..* 2 9,0 connectors for NPT ports, adapter ¼ NPT - female VP-0202N 6,00 mounting bracket made of steel, mounting nut at the device W11-01 1,00 + 44 + 44 + 4 1 Ø6. 9 30 3.10 3.13 3.10 96 W11-01 * 1 at 7 bar supply pressure and 1.4 bar pressure * 2 02 = 0 2. bar, 04 = 0 4 bar, 10 = 0 10 bar 3.1002.4X.07
Pressure Regulator with Increased ccuracy 10 The diaphragm pressure regulator provides precision regulation in high flow applications. balanced inner valve, sensitive rolling diaphragm and carefully positioned aspirator tube ensure constant pressure even with changing supply pressure and flow fluctuations. Supply pressure max. 3 bar ccuracy response sensitivity: < 2 mbar ir consumption max. 6 l/min, subject to pressure by handwheel with locknut Relieving function relieving, optionally non-relieving Relief capacity 10 l/min at 1. bar and 0.3 bar overpressure above setpoint Gauge port on both sides of the body, optionally ¼ NPT Mounting position any Temperature range 0 to 90 / 32 F to 194 F, for appropriately conditioned compressed air down to -40 / -40 F Material ody: aluminium die-cast Inner valve: stainless steel and brass Elastomer: NR/una-N, optionally FKM to G½, 1000 l/min 10 140 mbar / 28 bar Dimensions K v - Flow onnection Pressure Order Price value rate thread range number D supply pressure max. 3 bar, relieving, pressure regulator with constant bleed Modell 10 67 169 26 0.64 60 1000 0.01 0.14 10212H 22,00 0.01 0.7 10222H 22,00 0.01 1.4 10202H 22,00 0.01 2.1 10232H 22,00 0.07 4.1 10242H 22,00 0.14 10 10262H 22,00 0.20 14 10272H 270,00 67 178 26 0.64 60 1000 0.30 21 10282H 39,00 0.30 28 10292H 39,00 G 3 8 connection thread 102. 3H +10,00 G½ connection thread, recommended for mbar-range 102. 4H +40,00 NPT connection thread 102. 2 +10,00 non-relieving and without constant bleed 102. 2.N +32,00 reduced bleeding ca. 2 l/min 102. 2. +23,00 for small flow rate high constant bleed for more sensitivity 102. 2.L +40,00 tapped exhaust connection thread 102. 2.E +43,00 FKM elastomer 102. 2.J +100,00 tamper-proof cap aluminium, adjustment by screwdriver, total height 166 mm 102. 2.T +3,00 for oxygen specially cleaned 102. 2.S +172,00 non-ferrous metal-free FKM elastomer 102. 2.X63 +30,00 Model 10 pressure Ø 63 mm, 0 160 mbar,, capsule type M6302-2 70,00 pressure Ø 0 mm, 0 * 2 bar,, ourdon tube M002-..* 2 9,0 connectors for NPT ports, adapter ¼ NPT - female VP-0202N 6,00 mounting bracket made of steel W00-34 12,00 166 8 Ø9 18 37 Model 10 with tamper-proof cap W00-34 * 1 at 7 bar supply pressure, 6 bar pressure and 1 bar pressure drop * 2 01 = 0 1 bar, 02 = 0 2. bar, 06 = 0 6 bar, 10 = 0 10 bar, 16 = 0 16 bar, 2 = 0 2 bar, 60 = 0 60 bar 10212H.08
Pressure Regulator in Many Variations R230 The diaphragm pressure regulator provides precision regulation in high flow applications. balanced inner valve, sensitive rolling diaphragm and carefully positioned aspirator tube ensure constant pressure even with changing supply pressure and flow fluctuations. Supply pressure max. 17 bar ccuracy response sensitivity: < 4 mbar ir consumption max. 6 l/min, subject to pressure by handwheel with locknut Relieving function relieving, optionally non-relieving Relief capacity 110 l/min at 1. bar and 0.3 bar overpressure above setpoint Gauge port on both sides of the body, optionally ¼ NPT Mounting position any Temperature range 0 to 80 / 32 F to 176 F, for appropriately conditioned compressed air down to -40 / -40 F Material ody: aluminium die-cast Inner valve: stainless steel and brass Elastomer: NR/una-N up to G½, 900 l/min 10 140 mbar / 10 bar Dimensions K v - Flow onnection Pressure Order Price value rate thread range number D pressure regualtor supply pressure max. 17 bar, relieving, with constant bleed R230 67 14 16 0. 4 900 0.01 0.14 R230-020 190,00 0.01 1.0 R230-02 190,00 0.01 2.0 R230-02 190,00 0.07 4.0 R230-02 190,00 0.14 10 R230-02D 190,00 G 3 8 connection thread R230-03. +10,00 G½ connection thread, recommended for mbar range R230-04. +40,00 NPT connection thread R230-0..N +10,00 non-relieving and without constant bleed R230-0..K +2,00 reduced bleeding R230-0..X19 +2,00 tapped exhaust connection thread R230-0..X12 +3,00 tamper-proof cap aluminium, adjustment by screwdriver, total height 17 mm R230-0..T +3,00 check valve quick exhaust at supply pressure removal R230-0..X80 +8,00 R230 pressure Ø 63 mm, 0 160 mbar,, capsule type M6302-2 70,00 pressure Ø 0 mm, 0 * 2 bar,, ourdon tube M002-..* 2 9,0 connectors NPT connection thread, adapter ¼ NPT to female VP-0202N 6,00 mounting bracket made of steel W00-33 12,00 17 8 Ø9 18 4 R230 with tamper-proof cap W00-33 * 1 at 7 bar supply pressure, 6 bar pressure and 1 bar pressure drop * 2 01 = 0 1 bar, 02 = 0 2, bar, 06 = 0 6 bar, 10 = 0 10 bar R230-020.09
Pressure Regulator, Small and Light R300 Diaphragm pressure regulator of small and light design with high flow capacity. It provides sensitive adjustment accurate to 2 mbar. Supply pressure max. 18 bar ccuracy setting accuracy: < 2 mbar response sensitivity: < 2 mbar ir consumption max. 3 l/min, subject to pressure by handwheel with locknut Relieving function relieving Relief capacity l/min at 1. bar and 0.3 bar overpressure above setpoint Gauge port G 1 8 on both sides of the body, screw plugs supplied Mounting position any Temperature range 0 to 90 / 32 F to 194 F, for appropriately conditioned compressed air down to -40 / -40 F Material ody: aluminium die-cast Inner valve: stainless steel, brass and steel Elastomer: NR/una-N, optionally FKM and G 3 8 900 l/min Dimensions K v - Flow onnection Pressure Order Price value rate thread range number D pressure regulator supply pressure max. 18 bar, relieving with constant bleed R300 7 133 2 0. 4 900 0.001 0.14 R300-020 212,00 0.01 0.7 R300-021 212,00 0.03 2.0 R300-02 212,00 0.07 4.0 R300-02 212,00 0.14 7.0 R300-02 212,00 7 133 2 0. 4 900 G 3 8 0.001 0.14 R300-030 212,00 0.01 0.7 R300-031 212,00 0.03 2.0 R300-03 212,00 0.07 4.0 R300-03 212,00 0.14 7.0 R300-03 212,00 without constant bleed non-relieving, for small flow rate R300-0.. K +30,00 NPT connection thread R300-0.. N +10,00 tamper-proof cap aluminium, adjustment by screwdriver, total height 141 mm R300-0.. T +3,00 FKM elastomer R300-0.. V +10,00 for oxygen specially cleaned, with oxygen grease R300-0.. 1 +172,00 R300 pressure Ø 63 mm, 0 160 mbar, G 1 4 - connection parts required M6302-2 70,00 pressure Ø 0 mm, 0 * 2 bar, G 1 8 M001-..* 2 9,0 connection parts for M6302-2 M-04 1,0 mounting bracket made of steel W00-46 10,00 G 1 8 30 7 3 11 40 R300 W00-46 * 1 at 7 bar supply pressure and 1.4 bar pressure * 2 01 = 0 1 bar, 02 = 0 2, bar, 04 = 0 4 bar, 10 = 0 10 bar, 16 = 0 16 bar, 2 = 160 mbar R300-020.10
Pressure Regulator without onstant leed R100 Regulator provides precision regulation in high flow and high relief applications. sensitive rolling diaphragm and balanced inner valve assure constant pressure even with changing supply pressure and flow fluctuations. Supply pressure max. 18 bar ccuracy at supply pressure variation of 7 bar: < 7 mbar pressure deviation response sensitivity: < 2 mbar ir consumption without constant bleed by handwheel with locknut Relieving function relieving Relief capacity 200 l/min at 1. bar and 0.3 bar overpressure above setpoint Gauge port on both sides of the body, screw plugs supplied Mounting position any Temperature range 0 to 80 / 32 F to 194 F, for appropriately conditioned compressed air down to -40 / -40 F Material ody: zinc die-cast Inner valve: aluminium, brass and neoprene Elastomer: NR/una-N and G 3 8 1400 l/min Dimensions K v - Flow onnection Pressure Order Price value rate thread range number D pressure regulator supply pressure max. 18 bar, relieving, without constant bleed R100 4 129 2 0.73 78 1300 0.03 0.7 R100-021 362,00 0.03 2.0 R100-02 362,00 0.07 4.0 R100-02 362,00 0.14 10 R100-02 362,00 4 129 2 0.78 84 1400 G 3 8 0.03 0.7 R100-031 362,00 0.03 2.0 R100-03 362,00 0.07 4.0 R100-03 362,00 0.14 10 R100-03 362,00 NPT connection thread R100-0.. N +10,00 tamper-proof cap of aluminium, adjustment by screwdriver, total height 139 mm R100-0.. T +3,00 R100 pressure Ø 0 mm, 0 * 2 bar, M002-.. * 2 9,0 mounting bracket made of steel W20-04 1,00 R100 * 1 at 7 bar supply pressure and 1.4 bar pressure * 2 01 = 0 1 bar, 02 = 0 2. bar, 04 = 0 4 bar, 10 = 0 10 bar R100-021.11
Pressure Regulator with High Flow Rate and Exhaust R03 Regulator provides precision regulation in high flow and high relief applications. sensitive rolling diaphragm and balanced inner valve ensure constant pressure even with changing supply pressure and flow fluctuations. The regulator is silicone-free and suitable for panel mounting. oil-free and μm filtered Supply pressure max. 16 bar ccuracy at supply pressure change from 2 bar to 7 bar: < 6 mbar pressure deviation at volume flow change from 0 l/min to 20 l/min: < 20 mbar pressure deviation response sensitivity: < 4 mbar ir consumption < 1. l/min at P 1 = bar, < 2 l/min at P 1 = 7 bar, < 4 l/min at P 1 = 10 bar, < 1% of volume flow by handwheel with locknut, suitable for panel mounting Relieving function relieving Relief capacity 700 l/min at 6 bar and 0.3 bar overpressure above setpoint Gauge port on both sides of the body, one screw plug supplied Mounting position any Temperature range 0 to 60 / 32 F to 140 F, for appropriately conditioned compressed air down to -3 / -31 F Material ody: zinc die-cast Elastomer: NR/una-N up to G½ 400 l/min Dimensions K v - Flow onnection Pressure Order Price value rate thread range number D pressure regulator supply pressure max. 16 bar, relieving, with constant bleed R03 82 200 41 2.1 198 3300 * 3 0.01 3 R03-02 194,00 0.02 R03-02 194,00 0.04 7 R03-02 194,00 0.0 10 R03-02D 194,00 82 200 41 2.4 228 3800 G 3 8* 3 0.01 3 R03-03 194,00 0.02 R03-03 194,00 0.04 7 R03-03 194,00 0.0 10 R03-03D 194,00 82 200 41 2.9 270 400 G½ 0.01 3 R03-04 194,00 0.02 R03-04 194,00 0.04 7 R03-04 194,00 0.0 10 R03-04D 194,00 tamper-proof cap total height 204 mm R03-0.. T +20,00 pressure Ø 0 mm, 0 * 2 bar, M002-..* 2 9,0 mounting bracket made of steel W00-36 10,00 R03 20 G 1 4 panel cut-out 4 Ø. 204 32 17 R03 exhaust G 3 8 46 W00-36 tamper-proof cap * 1 at 7 bar supply pressure and 6 bar pressure * 2 04 = 0 4 bar, 06 = 0 4 bar, 10 = 0 10 bar * 3 standard unit G½ is reduced to smaller threads by fittings R03-02.12
Pressure Regulator without onstant leed R400 The diaphragm regulator provides high-precision regulation in high flow and high relief applications. sensitive rolling diaphragm and balanced inner valve ensure constant pressure even with changing supply pressure and flow fluctuations. Supply pressure max. 18 bar ccuracy response sensitivity: < 2 mbar ir consumption without constant bleed by handwheel with locknut Relieving function relieving Relief capacity 1000 l/min at 1. bar and 0.3 bar overpressure above setpoint Gauge port on both sides of the body, screw plugs supplied Mounting position any Temperature range 0 to 90 / 32 F to 194 F, for appropriately conditioned compressed air down to -40 / -40 F Material ody: aluminium die-cast Elastomer: NR/una-N, optionally FKM Inner valve: stainless steel, brass, aluminium and steel G 3 8 and G 3 4 4200 l/min Dimensions K v - Flow onnection Pressure Order Price value rate thread range number D pressure regulator R400 supply pressure max. 18 bar, relieving, without constant bleed 89 206 39 2.12 228 3800 G 3 8 0.03 0.7 R400-031 6,00 0.03 2.0 R400-03 6,00 0.07 4.0 R400-03 6,00 0.1 10 R400-03 6,00 0.3 17 R400-03D 60,00 89 206 39 2.23 240 4000 G½ 0.03 0.7 R400-041 6,00 0.03 2.0 R400-04 6,00 0.07 4.0 R400-04 6,00 0.1 10 R400-04 6,00 0.3 17 R400-04D 60,00 89 206 39 2.34 22 4200 G¾ 0.03 0.7 R400-061 6,00 0.03 2.0 R400-06 6,00 0.07 4.0 R400-06 6,00 0.1 10 R400-06 6,00 0.3 17 R400-06D 60,00 R400 tapped exhaust connection thread R400-0..X12 +2,00 NPT connection thread R400-0..N +10,00 tamper-proof cap of aluminium, adjustment by screwdriver, total height 29 mm R400-0..T +3,00 FKM elastomer up to 10 bar R400-0..V +16,00 pressure Ø 63 mm, 0 * 2 bar, M6302-..* 2 10,0 mounting bracket made of steel W00-47 73,00 39. 27. Ø. Ø. 27 20 2 Ø9 R400 W00-47 * 1 at 7 bar supply pessure and 1.4 bar pressure * 2 01 = 0 1 bar, 02 = 0 2. bar, 04 = 0 4 bar, 10 = 0 10 bar, 2 = 0 2 bar R400-031.13
Pressure Regulator for Flow 30 000 l/min R102 Provides precision regulation in high flow and high relief applications. sensitive rolling diaphragm and balanced inner valve assure constant pressure even with supply pressure and flow fluctuations. Supply pressure max. 18 bar, optionally max. 3 bar ccuracy response sensitivity: < 2 mbar ir consumption 0.% of volume flow, max. 1 l/min by T-handle with locknut Relieving function relieving, optionally non-relieving Relief capacity 1200 l/min at 1. bar and 0.3 bar overpressure above setpoint Gauge port for pressure Mounting position any Temperature range 0 to 90 / 32 F to 194 F, for appropriately conditioned compressed air down to -40 / -40 F Material ody: aluminium die-cast Elastomer: NR/una-N, optionally FKM at 3 bar version Inner valve: stainless steel, brass, aluminium and steel G1 and G1½ 30 000 l/min Dimensions K v - Flow onnection Pressure Order Price value rate thread range number D pressure regualtor supply pressure max. 18 bar, relieving, with constant bleed R102 141 287 6 11.4 1 680 28 000 G1 0.001 0.7 R102-081 1.00,00 0.03 2.0 R102-08 1.00,00 0.07 4.0 R102-08 1.00,00 0.14 7.0 R102-08 1.00,00 0.14 10 R102-08D 1.00,00 141 287 6 12.2 1 800 30 000 G1½ 0.001 0.7 R102-121 1.00,00 0.03 2.0 R102-12 1.00,00 0.07 4.0 R102-12 1.00,00 0.14 7.0 R102-12 1.00,00 0.14 10 R102-12D 1.00,00 NPT connection thread R102-... N +10,00 non-relieving and without constant bleed R102-... K +80,00 supply pressure 3 bar free of non-ferrous metal, FKM elastomer R102-... X62 +620,00 tamper-proof cap aluminium, adjustment by screwdriver, total height 29 mm R102-... T +8,00 R102 pressure Ø 63 mm, 0 * 2 bar, M6302-..* 2 10,0 mounting bracket made of steel W00-30 30,00 64 Ø7 19 63 R102 W00-30 * 1 at 10 bar supply pressure and 2.8 bar pressure * 2 01 = 0 1 bar, 02 = 0 2. bar, 04 = 0 4 bar, 10 = 0 10 bar R102-081.14