PRECISION FIREARMS FOR HUNTING SPORTING ARMOURY
PSG Walküre The precision rifle made in Bavaria / Germany The Precision Rifle range Walküre is based on our own designs and is built in-house. The actions are manufactured with our state of the art CNC centres using the finest steels. Currently we supply three action sizes - short, long and magnum. Without compromising accuracy we complete the rifles by using selected Lothar-Walther-match-barrels in customized lengths. We offer our customers a selection of different rifle stocks for their Walküre Rifle. We provide the E-Tac from PSE Composites in standard length of 14,2 inches and an adjustable cheek piece with roughly 1.2 inches travel. Furthermore we provide a selection of stocks from AICS. Features of our PSG Walküre: 3 lug steel action in short, long and magnum length. Fluted Bolt. Extractor similar to Sako. Bolt handle threaded to M8 to use a selection of bolt knobs. 3 position firing pin safety. Integrated Picatinny rail 0 MOA. Integrated recoil lug. Lothar Walther Match barrel Article Nr. 7525. 52cm, 58cm or 65cm barrel length depending on cartridge.* Remington 700 compatible trigger (Choose between Shilen or Jewell). Optional black, tan or green barrelled action coating. Muzzle thread M18x1. AICS-Magazin 1x5 round standard with every rifle, further 5 or 10 round Magazines available. Choice of 4 stock versions. Options for adjustable cheek, folding stock, bipod attachments and choice of 3 colours.* * For details please have a look at the Configuration sheet.
Combinations Options Calibre Action Barrel length in cm Barrelled action colour Stock Bolt Knob Shape Trigger 52 58 65 (Plastic).223 Rem. Short Action Parkerized, Barrel stainless E-Tac (PSE Composite) + Cone Shilen 6,5 x 47 Lapua Short Barrelled action tan colour + AICS AT fixed Pear Jewell +.260 Rem. Short Barrelled action green colour + AICS AT folding + Ball.308 Win. Short Barrelled action black colour + AICS AX folding +.300 Win. Short. Mag. Short --.300 Win. Mag. Long -- 6,5 x 55 Long -- Standard / Optional 6,5-.284 Long -- + Option at extra cost.338 Lapua Magnum Magnum -- -- -- Option not available EWB. This article can only be purchased with the correct licence. The pictured Walkure has the following features: 308Winchester with 65cm Barrel, barrelled action coated in tan, E-Tac stock in tan colour, cone shaped bolt knob, Shilen trigger, Muzzle break, Schmidt & Bender 5-25x56 PMII mounted on ERA-TAC.
Tikka T3 Laminated Stainless with single stage trigger and standard bolt handle. Open sights not included. The Tikka T3 can only be purchased with the correct licence. Best choice for opening with gloves! Bolt handle with M8 thread and screw-on bolt knobs in ball, cone or pear shape. Just like our tactical bolt handles, the version with M8 thread can be fitted without any re-work in the left or right-hand T3. The lever is made from corrosion resistant steel and weighs 28 grams which is 3 grams lighter than the original. Our bolt handles have been vibratory finished to remove all burrs and sharp edges. The M8 thread allows you to choose your favourite bolt knob shape. Our bolt knobs are made from engineering plastic the ball shaped knob weighs 14 grams and the other two weigh 17 grams. Tactical Bolt Handle for Tikka T3. Our tactical bolt handles will fit left or right actions without any need for re-work. The complete handle is made of steel and weighs 62 grams which is only 20 grams over the original from Tikka. The surface and edges are rounded with vibratory grinding which leads to more comfort when operating the bolt. On the tactical handle, the "knob" is 21mm long with a diameter of 20mm. To save some weight the end has been drilled hollow with a 13mm diameter hole, 25mm deep. The complete bolt handle is 85mm long which is 14mm longer than the original. You can choose between parkerized steel or stainless steel.
Customize your TIKKA T3! The 3-Pos safety will make your gun handling safer. With our bolt-handles your rifle will not only look better it leads to smoother and faster operation when hunting. 3-position safety TIKKA T3 left 3-Position Safety for Tikka T3 left/right 3-position safety TIKKA T3 right Make your Tikka T3 safer. We have developed a 3-position safety to replace your standard 2-position safety for left or right actions. The original plastic shroud is replaced by our blued steel shroud. The safety now engages directly on the firing pin. The safety lever can be removed horizontally between "safe & bolt locked" to "safe bolt free to load / unload" and to "fire" positions. The original safety will not be required and is removed in the process.
Also available in octagonal shape. Cocking lever left, red dot visible: cocked and bolt can be opened. Cocking lever to the right: de-cocked and bolt locked.
It is my passion to enhance proven rifle actions through providing my customers with increased safety and ease of handling. All of this»made in Bavaria «Manual cocking-system for K-98 We re-designed the manual cocking-system for the model 98. We mainly emphasised user-friendliness and reliable strike. Two shapes are available round and octanol. Cocking the lever will not require any great effort only 45 Newton or roughly 4.5kg on the lever. The lever moves horizontally along the shroud. The rotational movement of the lever on a cam tensions the firing pin spring. The spring reaches a spring force of 120 Newton. Your safety and the safety of your 98 bolt action rifle is a main concern of ours and we have therefore designed our manual cocking device with a firing pin safety. Therefore, our manual cocking has three lever positions: Cocked, bolt can be opened De-cocked and bolt locked Unlocked position Fitting should be completed by a gunsmith as minor adjusting and re-working will be required. We supply an instruction manual with the manual cocking shroud. Please keep in mind the two versions are only to be used with the appropriate rifle. The cocking devices can t be used or adapted for other rifles.
Büchsenmacherei zu Hochwang Andreas Schuler Leitiweg 25 D-89335 Ichenhausen / Hochwang Tel. +49 82 23. 40 90 61 Fax +49 82 23. 40 90 66 info@buema-hochwang.de www.buema-hochwang.de