OVER YEARS EXPERIEN IN EVERY STITCH
468 EN 397: 12 Industrial Safety Helmets Mandatory tests: Impact* : Energy spread to the head form must not exceed 5 kn after the fall of an object of 5 kg at 1m high. Penetration* : The tip of the test mass used (3 kg from 1m height) must not come into contact with the skull. Flammability : The helmet is exposed to a flame and it must not burn with flame emission more than 5 seconds after removal of the flame. * Impact and penetration tests are performed at room temperature, at + C and at -10 C. Optional tests: Resistance at extreme temperatures: testing impact and penetration are performed at +1 C, at - C or -30 C temperatures. Electrical properties: Protects against a short accidental contact with electric leads under voltage up to 440 Vac. Lateral deformation: Protects against lateral compression. The maximum deformation of the helmet should be 40 mm (). Molten metal splashes: The helmet is not deformed or penetrated by splashes of molten metal (MM). : 02 Insulating helmets for use on low voltage installations This standard is for helmets used for working live or close tolive parts on installations not exceeding 0 V a.c. or 10 V d.c. Testing to EN365 exceeds testing under EN397 for electrical properties. Marking: double triangle + class +batch number. ANSI/ISEA Z89.1: 09 American National Standard for Industrial Head Protection This standard describes Types and Classes, testing and performance requirements for protective helmets. These include recommended safety requirements for authorities considering the establishment of regulations or codes concerning the use of protective helmets. TYPE I - Hard hats are designed only to withstand top impacts TYPE II - Hard hats designed to withstand impacts from the top and the side. Class C - Conductive Helmet = the hard hat will not protect the wearer from electrical hazards. Class G - General Helmet = helmet can withstand an electrical current up to 2,0 volts. Class E - Electrical Helmet = helmet that providing the highest level of electrical protection, withstanding currents up to,000 volts. PA51 PA52 PW54 / PS54 PW55 / PS55 PS53 PW97 PW51 PE -30 C/+ C -30 C/+ C -30 C/+ C -30 C/+ C 440 VAC 440 VAC 440 VAC MM PW56 PW58 MM PW47 / PS47 PW42 / PS42 Head Protection PW rapidly expanding head protection product range aims to benefit our customers by combining the most updated styles and standards in head protection, irrespective of job or location. A wide selection of compatible accessories is also available. A full explanation of features and performances are given in order to help you make a more informed choice. Range Selection Help With Choice FEATURES EN 397 Shell material Harness material Polyamide Polyamide Nylon Adjustment Wheel Ratchet Wheel Ratchet Wheel Ratchet Wheel Ratchet Buckle Ventilation Temperatures Electrical Properties (440Vac) Molten Metal Lateral Deformation Electrical Insulation (0Vac/10Vdc)
PW53 0 10 PA51 Chin Strap Suitable for PW, PW51, PW57 and PS. PA52 Safety Helmet Harness Ratchet Polypropylene Clear Adjustable headband 52-62cm Nylon, Black PW56 Slip Ratchet Safety Harness 0 Endurance Visor Replacement EN 166 1 B 9 Polypropylene Clear Adjustable headband 52-62cm Suitable for PW54, PS54, PW55 and PS55. Polycarbonate Clear ID10 ID Holder In Case of Emergency (I) stickers for accident victims gives on-site instant access to victims potential lifesaving information and enables emergency contacts be quickly notified of the situation 24/7. PVC Yellow PS PW PW57 PS52 PW98 Polyamide Nylon Buckle Buckle Buckle Wheel Ratchet Wheel Ratchet 600 1 ID11 440 VAC -30 C/+ C 800 1 440 VAC ne Jo Pe ter PVC Red 800 1 PW98 12 SNR 29dB AW15_E-FINAL.indd 469 Medical Information Contact Offers immediate identification of the worker with medical information that could ultimately save the life of the worker in accidents and emergencies. Language free with instantly recognisable icons for easy and global recognition. s Emergency ID using universal images to ensure that vital emergency information can be easily identified in the event of an accident. A window displays user s name. PVC Yellow ID12 Universal Emergency ID Forestry Combi Kit EN 352-3 EN 166 3B EN 1731 F EN 397-30 C/+ C, ANSI/ISEA Z89.1 TYPE I CLASS G Helmet, Mesh Visor, / Polystyrene Ear protector. Orange, Adjustable 56cm - 62cm H: 32 db M: 26 db L: 19 db 04/06/15 14:56
470 PW54 AS AF MM Endurance Plus Visor Helmet CLASS:0 EN 397-30 C/+ C, MM,, 440V EN 166 1 B 9 shell helmet, textile comfort harness 6 points, wheel ratchet adjustment, adjustable size 56-63 cm. Sweat band and chin strap included. Sold with retractable clear visor PW56 included. Spare parts available., Polycarbonate Blue, Orange, Red, White, Yellow PS54 MM Endurance Plus Helmet EN 397 + C/-30 C; MM; ; 440VAC CLASS:0 Endurance Plus shell helmet - now available without retractable visor. White PW55 AS AF Endurance Visor Helmet EN 166 1 B 9 EN 397-30 C/+ C, ANSI/ISEA Z89.1 TYPE I CLASS G Vented helmet. shell, textile comfort harness 6 points, wheel ratchet adjustment, adjustable size 56-63 cm. Sweat band and chin strap included. Sold with retractable clear visor PW56 included. Spare parts available., Polycarbonate Blue, Orange, Red, White, Yellow PS55 Endurance Helmet EN 397-30 C/+ C, ANSI/ISEA Z89.1 TYPE I CLASS G Endurance vented shell helmet - now available without retractable visor. White Secure Comfortable Fit for the Wearer AW15_E-FINAL.indd 470 05/06/15 10:11
PS53 PW Height Endurance CLASS:0 - LT (OPTIONAL) EN 397-30 C/+ C Designed to be specially used for working at heights. Light, comfortable and compact with a short peak. shell, textile comfort harness 6 points, wheel ratchet adjustment, size 56-63 cm. Sweat band and 4 points chin strap (Y style) with soft rubber chin protector included. Orange, Yellow, White Adjustabe 56-63cm PW97 MM Climbing Helmet EN 397-30 C/+ C MM 440V ANSI/ISEA Z89.1 TYPE I Vented helmet, adapted for working at heights. High wearing comfort polyethylene shell, six points harness, buckle adjustment. Supplied with sweat band and 4 points chin strap (Y style). PE Blue, White, Yellow Adjustable 52-62cm PS52 PW Full Brim Future EN 397 Full brim helmet with lightweight shell. Its wide profile provides extra protection against sun, glare, rain, debris and non-toxic splashes. A 4 points nylon harness with ratchet wheel adjustable size (52-63 cm). Soft foam sweat band included. White Adjustable 52-63cm PW51 Endurance Plus Safety Helmet EN 397 shell helmet with extended peak to minimise glare. A 4 points nylon webbing harness, Buckle adjustable size 55-62cm. Foam sweat band included. Blue, White, Yellow Adjustable 55-62cm Better Visibility, Less Cumbersome
472 PS PW Arrow Safety Helmet EN 397 ANSI/ISEA Z89.1 TYPE I CLASS C Vented helmet with unique arrow vented design allowing a refreshing airflow around the head. High-density polypropylene shell, 4 points suspension harness with buckle adjustable size 55-62cm. Foam sweat band included. Blue, White, Yellow Adjustable 55-62 cm PW Endurance Safety Helmet EN 397,, 440V CLASS:0 High-density polypropylene shell helmet, 4 points plastic suspension harness. Buckle adjustable size 55-62cm. Soft sweat band included. Blue, Green, Orange, Red, White, Yellow Adjustable 55-62cm PW57 Hi-Vis Helmet EN 397,, 440V CLASS:0 High density polypropylene Hi-Visibility shell helmet. Four-points plastic harness includes a foam backed polyester sweatband. Buckle adjustable size 55-62 cm. High-Visibility Orange, High- Visibility Yellow Adjustable 55-62cm PA58 Helmet Winter Liner This insulating liner is suitable to be worn with all helmets. Four Hook & Loop straps attach the liner to helmets for a secure fit. Can be worn with chin strap. % Cotton Black,Navy one size fits all Sub Zero Protection Lightweight Head Protection
Bump Caps Bump Caps can reduce the risk of head injuries in the workplace by providing head protection against minor bumps and scrapes. Combining the comfort and style of a Sport Cap with the added protection of a plastic protective shell and soft pads, PW Bump Caps provide a light weight, comfortable solution to head protection. Fashionable design also means it is a form of safety wear that employees will actually want to wear. 473 : 12 Industrial Bump Caps European standard for bump caps for industry, describing mandatory impact and penetration tests. NOTE: Bump Caps protect against impacts from knocks against structures and objects. They don t protect against falling objects and in all cases where a Safety Helmet is required. HOOK & LOOP STRAP allows easy adjustment and secure fitting Large VENTILATION HOLES for breathability INNER SOFT PAD for extra comfort and shock absorption OUTER SOFT PAD for comfort and shock absorption OUTER CAP made from heavy duty cotton twill HIGH QUALITY PLASTIC SHELL provides good protection PW59 60 Portwest Bump Cap Classic design bump-cap; ventilation ports for maximum breathability. Metallic ring holes for baseball cap look. % Cotton,, EVA Black, Navy, Royal Adjustable 54-59 cm PW79 60 Hi Vis Bump Cap Modern style bump cap in Hi-Visibility colours. Mesh panel on the back which, together with covering the ventilation holes on the internal shell, help cooling comfort. Cotton, Mesh,, EVA Orange, Yellow Adjustable 54-59 cm PW69 Vent Cool Bump Cap PW89 60 60 Sport look bump cap, with large mesh panel on the top, allowing maximum airflow. Reflective stripes for enhanced safety and style. Cotton, Mesh,, EVA Black, Grey, Navy, Red PW Short Peak Bump Cap Without reducing the level of performance and protection, the short peak of this bump cap gives the benefit of lighter wear and better visibility. Peak length 3cm only. % Cotton,, EVA Foam Black, Navy, Royal Adjustable 54-59 cm