HETING SYSTEM ESSORIES ccessories for heating systems PRESOR PRESOR S FLEXON THERMO-PRESSURE GUGE FLEXFST FLEXONSOLE 2005 Edition / EXP
complete programme for the protection of Prescor safety valves are used to maintain safe pressure levels in closed central heating/ chilled water systems. hoosing a Prescor safety valve can be done by ensuring the nominal boiler capacity. ll safety valves made by bear the E mark. The set pressure and the maximum capacity for which the valve is suitable are marked on the valve. PRESOMNO PRESOR 1 / 2 Prescomano, the handy combination of Prescor safety valve and Flexcon pressure gauge. Prescor safety valves complete programme of 1 /2-2 valves with standard set pressure. Robust brass housing. Easy readable pressure gauge with adjustable red pointer. PRESOR SFETY - THE ULTIMTE SFETY an be fitted on, or as PRESOR VNTGES High-quality material and construction are your guarantee of reliable function when you need it most. The pop-effect means that the valve opens automatically when pressure rises quickly. Excess energy is then expelled as steam. Valves and materials can withstand temperatures up to 140. ll valves are individually tested in the factory. close as possible to, the boiler in the supply line. Remember - never position a stop cock between the boiler and the valve! 2
your system PRESOR 3 / 4 PRESORPLUS T 1 / 2 PRESOR S FLMO FLNGE VLVES Handle for testing the valve. plate of the Prescor S which lists the set pressure and the maximum boiler capacity for which the valve is suitable. Prescor S safety valves Prescor S safety valves are suitable for sealed central heating and chilled water systems with a capacity of up to 5590 kw at a standard set pressure from 2 up to 10 bar. These valves, with their 1 1 /4 2 fittings form the ideal protection for larger systems. flanged safety valves (TR approved) For protection against excess pressure in heat-generation systems (IN EN 12828-compliant) with a maximum permitted temperature of 120. Robust brass housing. Important: Never block a safety valve's discharge opening. o not use the safety valve to drain, bleed or vent the system. What to do: lways fit a funnel or a discharge pipe of the accompanying diameter (which matches the discharge opening of the valve). offers the best in safety valves for each system application 3
Expert construction and high-quality materials The above, in addition to the craftsmanship of the fitter, makes each Prescor safety valve an absolute top product. Optimum safety for each system. The regular Prescor valves are sufficient in systems with a capacity of up to 929 kw. In systems with greater capacity, up to 5590 kw, you should choose the Prescor S. hoose Prescor and you choose quality! PRESOR 3 / 4 60 80 40 100 20 120 o Impact-resistant plastic button. bar 4 3 2 1 0 The system when cold. Non-ageing spring steel prevents the set pressure from dropping. 60 80 40 100 20 120 o bar 4 0 1 3 2 The diaphragm prevents moisture and dirt getting into the moving parts during blowing-off. When the system heats up, the water inside will expand. 60 80 40 100 20 120 o bar 4 0 1 3 2 The pressure in the system rises. The valve seal is made of highquality rubber and is heat-resistant up to 140. The degree of hardness of the rubber is adjusted to the valve s set pressure. These properties prevent the valve from sticking to its seat. 60 80 40 100 Safety is a matter of confidence. Prescor has been offering that confidence for decades. That name is a guarantee for me, as it is for you and your customer." 20 120 o bar 4 3 2 1 0 The Prescor valve opens. The excess pressure is discharged. Prescor for safety and quality 4
form the basis of Prescor quality ll Prescor safety valves are permanently factory-preset to the set opening pressure marked on them. philosophy is that no one should be able to mess around with the safety device of your expensive boiler/cooling machine. PRESOR S Handle for testing the valve. Prescor S valves Several Prescor S safety valves may be fitted to a system to meet its usable capacity, if permitted by the prevailing rules and regulations. The safety valve must be fitted to Spring for pre-setting the pressure. This setting is locked. rass housing. the system when it is not under pressure. When commissioning the system, we recommend flushing the pipe work first. s is the case with bleeding, this must never be done with the Prescor S safety Valve with seal of special rubber. valve. iaphragm protecting the spring and preventing leakage of water at the spindle. E approved. rass valve seat. PRESOR VNTGES n extensive programme which always has the right valve for you. Guaranteed quality means you needn't worry about safety. ll valves are individually tested in our factory. Valves and materials can withstand temperatures up to 140. 5
wide range of accessories In addition to an extensive range of safety valves for systems of all sizes, can also offer you a series of other products. Their aim is not only the safety of your system; they are also geared to making your job easier. (THERMO) PRESSURE GUGES. FILLING GROUP. FLEXON THERMO-PRESSURE GUGE FLEXON PRESSURE GUGE Flexcon thermo-pressure gauge For simultaneously reading the operating pressure and temperature. lack moving pointer = current operating pressure. Flexcon pressure gauge Flexcon pressure gauges, Ø 80, may be fitted/changed without draining the system owing to the shut-off valve. Temperature indicator. Immersion pipe. Flexcon pressure gauge, Ø 80 rad. Movable red pointer shows the maximum temperature. Green zone = safe operating pressure. Red stripe at 3 bar shows the maximum operating pressure. Flexcon pressure gauge, Ø 80 ax. FLMO: FLEXILE WITH USEFUL ESSORIES! USE N FITTING The Flexcon thermo-pressure gauge is supplied complete with immersion pipe. Easy to fit all you need is a suitable socket spanner for the hexagon-head bolt on the connection. fter fitting, water flows into the immersion pipe. efore screwing in, the shut-off valve closes off the immersion pipe. Once properly screwed in, the immersion pipe must be rinsed with water. 6
FLMO WMS 800 MNOFILLER PRESSURE-REUING VLVE WMS 800 It is particularly recommendable to fit this low-water-level security in heating systems with boilers at the highest point. If the water level is too low, the WMS 800 will switch the burner off. This action prevents the boiler from boiling dry. pressure-reducing valves comprehensive range of valves specially designed for building services applications. oth adjustable (by screw with locking nut) and factory pre-setting is available for all sizes ( 1 /2 2 ). Integral stainless steel strainers are fitted and all larger valves have a pressure gauge with union. The gauge may be mounted on either side. Maximum inlet pressure 16 bar. Maximum pressure reduction ratio: 10:1. WR listed (except 1 /2 RFM). ompact valves with excellent performance! all valve for filling and draining, with hose coupling and shut-off cap. The filling and draining cock can be opened and closed by using the rear of the shut-off cap. T-piece with 1 /2 coupling. MNOFILLER Manofiller filling group The Manofiller filling group is suitable for fitting to one of the loose connection points of a radiator. The best use for a Manofiller is in situations in which the pressure gauge is fitted to or next to the boiler/cooling machine, while the system is filled somewhere else: perhaps in the bathroom. It is possible to fit it in any position. : flexible with useful accessories! 7
With these products, you can mount, disasse Flexcon vessel can, of course, be attached directly to a pipeline. However, for a better solution, you can turn to the Flexfast isolating union, Flexconsoles or Flexcon connection sets shown here. Their use greatly facilitates reading the pressure or disconnecting the vessel without draining the system or releasing the pressure. ISOLTING UNION. ONNETION SETS. FLEXFST 3 / 4 Valve open Valve closed The Flexfast isolating union makes it possible to inspect the pre-pressure of Flexcon vessels with capacity of up to 25 litres quickly and efficiently, or to replace the vessel without the system losing pressure or having to be drained. Valve open Valve closed Vessel connected to system. Vessel disconnected from system. VNTGES OF FLEXFST Finished with 3 /4 internal thread and 3 /4 external thread. Easy to mount with the correct tools before handtightening the individual components. onsiderable time saving when performing maintenance on your Flexcon vessel. 8
mble and inspect Flexcon expansion tanks quickly! FLEXONSOLE PLUS FLEXONTROL FLEXON ONNETION SET 1 / 2 FLEXON ONNETION SET 1 Flexconsole Plus Flexontrol Flexcon connection sets n exceptionally complete For easy disassembly There are two types. The Flexcon product in the same red colour as the Flexcon of the Flexcon vessel without draining the Seal with safety sleeve. 1 /2 connection set is suitable for Flexcon expansion vessels from vessels. The vessels are system or releasing 35-300 litres and installations to be mounted vertically, hanging from the mains- the pressure. System connection. with an output of up to 660 kw. The Flexcon 1 connection set water connection. Product is suitable for Flexcon expansion includes: Flexcon pressure gauge. Flexvent floatvent, safety valve, Flexfast isolating union, mounting set. vessels from 110-1000 litres and installations with an output of up to 2355 kw. Flexconsole This model is supplied with a 1 /2 radiator stop including manual venting device. Flexcon pressure gauge, Ø 50 mm, settings from 0 8 bar. all cock for filling and draining with hose coupling and shut-off cap. onnection for attachment to the vessel. Flexcon connection sets consist of components such as a drain cock and shut-off valve. Once the valve is closed, the vessel may be drained and then inspected or replaced. The Flexcon 1 /2 connection set is fitted on the expansion pipe, whereas the 1 version is fitted to the water nipple of the Flexcon vessel. develops, produces and sells an exceptionallywide range of accessories for heating and other systems. You can rely on. 9
The possibilities offered by are legion. In addition to the products shown on the previous pages, you can also choose products shown on this page. is the only company in its class that can deliver a total range of products which are precisely in harmony with each other and are attuned to practical situations. PRESSURE SFETY FLEXON ISSSEMLY SPNNER T FLMO FUNNEL FLEXON M 2 VESSEL SUPPORT Together with each Prescor valve belongs a funnel The funnel keeps the connection open to the atmosphere under all conditions; if there is a blockage or if the supply pipe is frozen, an open connection is vital to safety. funnels can be rotated in relation to the elbow joint, which means that they can be mounted easily. Installation The Flexcon T disassembly spanner easily unscrews a stuck Flexcon vessel. Flexcon vessels have a long service life. When they, eventually, have to be replaced, they may be so tight that it seems impossible to remove them. Help is at hand, in the shape of the Flexcon disassembly spanner - the best way to release such Flexcon vessels. Flexcon ombi-set TThe Flexcon ombi-set is a universal connection set for expansion vessels. They can be used if a Flexcon vessel cannot be fitted directly to an existing system, for example if expansion vessels have to be changed. The set has a flexible pipe ( 3 /4 x 3 /4 ) of length 520 mm. Pressure-safety System high or low pressure cut out switch. Safety device for wiring into boiler controls. One switch for each operation. Flexcon M 2 vessel support 1. The Flexcon M 2 vessel support is fitted to the wall with the threaded dowel pins and plugs supplied. 2. The Flexcon M 2 has a slot in which the vessel's clamp fits exactly. The action of screwing in the two pins clamps the tank in place. 3. The Flexcon M 2 is suitable for fixing Flexcon and irfix vessels with capacities of up to 25 litres to the wall. 10
Prescor, Flopress, Prescomano and PrescorPlus Should the pressure in the installation rise too high, the Prescor safety valve will ensure that the excess water and steam are discharged safely. Prescor safety valves for sealed central heating and chilled water (cooling) systems. Pre-set pressure, non adjustable, membrane seal, quick release. The Prescomano is a combination of a Prescor safety valve and a Flexcon pressure gauge. The PrescorPlus T 1 /2 is a Prescor safety valve with an extra integrated T-piece clamp (22 mm) for direct fixing in a 22 mm pipe. Models and dimensions Prescor safety valves Set low-off onnections imensions in mm ode pressure capacity number in bar in kw Prescor 1 /2 1,5 81 1/2 F 1/2 F 65 49 27608 Prescor 50-1 /2 TR 2,5 50 1/2 F 3/4 F 61 51 27630 Prescor 50-1 /2 M TR 2,5 50 1/2 M 3/4 F 73 51 27620 Prescor 50-1 /2 TR 3 50 1/2 F 3/4 F 61 51 27634 Prescor 1 /2 3 125 1/2 F 1/2 F 65 49 27665 Prescor 1 /2 M 3 125 1/2 M 1/2 F 79 49 27675 Prescor 1 /2 4 154 1/2 F 1/2 F 76 51 27606 Prescor 3 /4 1 170 3/4 F 3/4 F 76 51 27022 Prescor 3 /4 1,5 85 3/4 F 3/4 F 76 51 27023 Prescor 3 /4 2,5 115 3/4 F 3/4 F 76 51 27026 Prescor 100-3 /4 TR 2,5 100 3/4 F 1 F 82 61 27020 Prescor 170-3 /4 3 200 3/4 F 3/4 F 76 51 27025 Prescor 100-3 /4 TR 3 100 3/4 F 1 F 82 61 27024 Prescor 1 1,5 140 1 F 1 1 /4 F 99 76 27042 Prescor 1 2 170 1 F 1 1 /4 F 99 76 27043 Prescor 200-1 TR 2,5 200 1 F 1 1 /4 F 99 76 27044 Prescor 320-1 3 375 1 F 1 1 /4 F 99 76 27045 Prescor 1 3,5 240 1 F 1 1 /4 F 99 76 27047 Prescor 320-1 4 270 1 F 1 1 /4 F 99 76 27040 Prescor 320-1 5 320 1 F 1 1 /4 F 99 76 27049 Prescor 320-1 1 /4 TR 2,5 350 1 1 /4 F 1 1 /2 F 128 83 27055 Prescor 1 1 /4 3 640 1 1 /4 F 1 1 /2 F 128 83 27056 Prescor 350-1 1 /4 TR 3 350 1 1 /4 F 1 1 /2 F 128 83 27057 Prescor 1 1 /4 3,5 716 1 1 /4 F 1 1 /2 F 128 83 27036 Prescor 550-1 1 /4 4 787 1 1 /4 F 1 1 /2 F 128 83 27037 Prescor 550-1 1 /4 4,5 858 1 1 /4 F 1 1 /2 F 128 83 27038 Prescor 550-1 1 /4 5 929 1 1 /4 F 1 1 /2 F 128 83 27039 PRESOR PRESOMNO Models and dimensions Prescomano safety valves low-off low-off onnections imensions in mm ode pressure capacity number in bar in kw Prescomano 1 /2 3,0 125 1/2 int. 1/2 int. 65 90 27683 Prescomano 3 /4 3,0 200 3/4 int. 3/4 int. 76 92 27090 PRESORPLUS Models and dimensions PrescorPlus safety valves low-off low-off onnections imensions in mm ode pressure capacity number in bar in kw Prescorplus T 1 /2 3,0 125 22 mm 15 mm 82 68 27668 Models Flopress safety valves FLOPRESS low-off low-off onnections ode pressure capacity number bar in kw Flopress 1 /2 2,5 90 1/2 F 1/2 F 27006 Flopress 1 /2 3,0 110 1/2 F 1/2 F 27005 Flopress 1 /2 3,0 100 1/2 M 1/2 F 27015 11
Prescor S safety valves and full-stroke safety valves with flanges Prescor S safety valves are suitable for sealed central heating systems with outputs of up to 1980 kw at 3.0 bar. Unnecessary use of the safety valve must be avoided as otherwise there is a greater risk that dirt will build up between the valve and its seat. Full-stroke safety valves with flanges are TR approved. Full-stroke safety valves with flanges must also be fitted vertically, in accordance with local rules and regulations. Please state set-pressure when ordering (between 1,0 bar and 10,0 bar). Models and dimensions Prescor S safety valves low-off low-off onnections imensions in mm ode pressure capacity (internal thread) number in bar in kw E F Prescor S 1 1 /4 2 600 1 1 /4 1 1 /2 96 58 48 166 29201 Prescor S 1 1 /4 2,5 704 1 1 /4 1 1 /2 96 58 48 166 29202 Prescor S 1 1 /4 3 810 1 1 /4 1 1 /2 96 58 48 166 29203 Prescor S 1 1 /4 3,5 911 1 1 /4 1 1 /2 96 58 48 166 29204 Prescor S 1 1 /4 4 1013 1 1 /4 1 1 /2 96 58 48 166 29205 Prescor S 1 1 /4 4,5 1117 1 1 /4 1 1 /2 96 58 48 166 29206 Prescor S 1 1 /4 5 1220 1 1 /4 1 1 /2 96 58 48 166 29207 Prescor S 1 1 /4 6 1426 1 1 /4 1 1 /2 96 58 48 166 29208 Prescor S 1 1 /4 7 1632 1 1 /4 1 1 /2 96 58 48 166 29209 Prescor S 1 1 /4 8 1839 1 1 /4 1 1 /2 96 58 48 166 29210 Prescor S 1 1 /4 10,0 2252 1 1 /4 1 1 /2 96 58 48 166 29211 PRESOR S F Prescor S 1 1 /2 2 850 1 1 /2 2 96 68 53 173 29221 Prescor S 1 1 /2 2,5 996 1 1 /2 2 96 68 53 173 29222 Prescor S 1 1 /2 3 1120 1 1 /2 2 96 68 53 173 29223 Prescor S 1 1 /2 3,5 1289 1 1 /2 2 96 68 53 173 29224 Prescor S 1 1 /2 4 1435 1 1 /2 2 96 68 53 173 29225 Prescor S 1 1 /2 4,5 1581 1 1 /2 2 96 68 53 173 29226 Prescor S 1 1 /2 5 1727 1 1 /2 2 96 68 53 173 29227 Prescor S 1 1 /2 6 2019 1 1 /2 2 96 68 53 173 29228 Prescor S 1 1 /2 7 2312 1 1 /2 2 96 68 53 173 29229 Prescor S 1 1 /2 8 2604 1 1 /2 2 96 68 53 173 29230 Prescor S 1 1 /2 10,0 3188 1 1 /2 2 96 68 53 173 29231 E Prescor S 2 2 1491 2 2 1 /2 129 101 76 217 29241 Prescor S 2 2,5 1747 2 2 1 /2 129 101 76 217 29242 Prescor S 2 3 1980 2 2 1 /2 129 101 76 217 29243 Prescor S 2 3,5 2259 2 2 1 /2 129 101 76 217 29244 Prescor S 2 4 2515 2 2 1 /2 129 101 76 217 29245 Prescor S 2 4,5 2772 2 2 1 /2 129 101 76 217 29246 Prescor S 2 5 3028 2 2 1 /2 129 101 76 217 29247 Prescor S 2 6 3540 2 2 1 /2 129 101 76 217 29248 Prescor S 2 7 4053 2 2 1 /2 129 101 76 217 29249 Prescor S 2 8 4565 2 2 1 /2 129 101 76 217 29250 Prescor S 2 10,0 5590 2 2 1 /2 129 101 76 217 29251 FLNGE VLVES H Models and dimensions safety valves with flanges Nominal imensions in mm Free Weight ode diameter N space number Inlet ischarge above flange flange cap Flange Flange E F H X in mm in kg Full-stroke safety valve 20 20 32 105 140 85 95 270 150 8,5 27080 Full-stroke safety valve 25 25 40 115 150 100 105 280 150 9,5 27081 Full-stroke safety valve 32 32 50 140 165 110 115 330 200 13,5 27082 Full-stroke safety valve 40 40 65 150 185 115 140 390 250 20 27083 Full-stroke safety valve 50 50 80 165 200 120 150 435 300 26 27084 Full-stroke safety valve 65 65 100 185 220 140 170 545 350 39 27085 Full-stroke safety valve 80 80 125 200 250 160 195 610 400 53 27086 Full-stroke safety valve 100 100 150 220 285 180 220 690 500 82 27087 Full-stroke safety valve 125 125 200 250 340 200 250 845 500 125 27088 E F 12
Manofiller, pressure-reducing valves and (thermo)pressure gauges ecause of its radiator coupling, the Manofiller can be connected directly to existing radiator connections. Flexcon pressure gauges must be mounted using a suitable llen key. In the case of the Flexcon thermo-pressure gauge, a hexagonal key is needed. Flexcon Ø 80 pressure gauges and Flexcon thermo-pressure gauges may be fitted and changed without draining the system, due to the shut-off valve. pressure-reducing valves are compact with excellent performance. They utilise the proven bladder principle of pressure regulation. omplete with an integral serviceable strainer. Model and dimensions Manofiller filling group onnections ode number Manofiller 1/2 ext. Ø 15 mm 27097 MNOFILLER Models and dimensions Flexcon pressure gauges onnections imensions in mm ode E number Pressure gauge Ø 63 rad. G 3 /8 Ø 63 28 87 27200 Pressure gauge Ø 63 rad. G 1 /4 Ø 63 28 87 27205 Pressure gauge Ø 63 ax. G 1 /4 Ø 63 51 27210 Pressure gauge Ø 80 rad.* R 1 /2 G 1 /4 Ø 80 32 121 27220 Pressure gauge Ø 80 ax.* R 1 /2 G 1 /4 Ø 80 78 27230 * With shut-off valve. 96 150 Model and dimensions Flexcon thermo-pressure gauge onnection imensions in mm ode number Thermo-pressure gauge Ø 80 ax.* R 1 /2 Ø 84 78 27250 87 * With shut-off valve. Models and dimensions pressure reducing valves THERMO-PRESSURE GUGES onnection imensions in mm Max. pressure ode bar number 1 /2 PR with gauge 1/2 F 100 65 16 17441 3 /4 PR with gauge 3/4 F 105 75 16 17442 1 PR with gauge 1 F 130 100 16 17443 1 1 /4 PR with gauge 1 1 /4 F 160 190-17444 1 1 /2 PR with gauge 1 1 /2 F 220 220-17445 2 PR with gauge 2 F 220 250-17446 * With shut-off valve. PRESSURE REUING VLVES PRESSURE GUGES X E PRESSURE GUGES R 13
Flexfast isolating union, Flexcon connection sets, Flexontrol and funnels For simple and efficient inspection or changing of a Flexcon tank, without having to release the system pressure or drain the system. The underside and top of the Flexfast isolating union must be fitted with the correct tools. Then, both Flexfast component parts must be screwed together hand-tight. The Flexcon 1 /2 connection set may be used in systems with a capacity of up to 660 kw. For the Flexcon 1 connection set, the maximum capacity of the system can be up to 2355 kw. The 1 /2 and 3 /4 funnels are made of brass. The 1 1 /4 and 1 1 /2 funnels are made of cast iron. Model and dimensions Flexfast isolating union onnections imensions in mm ode number Flexfast 3 /4 3/4 ext. 3/4 int. 68 27920 Models and dimensions Flexcon connection sets onnections ode number 1 /2 with pressure gauge 1/2 ext. 12 mm- 1 /2 ext. Ø 13 mm 27290 1 /2 without pressure gauge 1/2 ext. 12 mm- 1 /2 ext. Ø 13 mm 27900 1 with pressure gauge 1 int. 1 int. Ø 15 mm 27293 Model and dimensions Flexontrol onnections ode number Flexontrol 3 /4 3/4 int. 3/4 int. 28920 FLEXFST Models and dimensions funnel 84 onnections imensions in mm ode number (ext.) (int.) Funnel 1 /2 1/2 1/2 80 55 27350 Funnel 3 /4 3/4 1 94 76 27360 Funnel 1 1 1 1 /2 195 100 27325 Funnel 1 1 /4 1 1 /4 1 1 /2 195 100 27330 Funnel 1 1 /2 1 1 /2 1 1 /2 205 105 27340 97 51 FLEXON ONNETION SET 1 / 2 87,5 100 145 Ø50 FLEXONTROL FUNNELS 93 FLEXON ONNETION SET 1 14
Flexconsole, T disassembly tool, Flexcon M 2, pressure safety, ombi-set and WMS 800 y screwing in the wingnut, the Flexcon T disassembly tool attaches itselves to the Flexcon tank clamp ring. Then all you need to do is move the tank to the side. The Flexconsole and Flexconsole Plus are used for simply and quickly fitting and connecting Flexcon expansion tanks with capacities of up to 25 litres. The WMS 800 low-water-level protection prevents the boiler from boiling dry. t regular intervals, a professional must inspect the system and its function using the test button. Models and dimensions Flexconsole onnections imensions in mm ode number (bi.) (bi.) Flexconsole 3 /4 1/2 3/4 195 275 27910 Flexconsole Plus 3/4 3/4 195 275 27996 Flexconsole Plus without accessories 3/4 3/4 195 275 27998 FLEXONSOLE Ø42 Model and dimension Flexcon T imension in mm ode number Flexcon T 350 27925 FLEXON T Model and dimensions Flexcon M 2 Suitable for imensions in mm ode number Flexcon vessel support M 2 Flexcon / irfix 8-25 94 110 26 27913 M 2 Model pressure safety onnection ode number Minimum pressure safety 1/2 27459 Maximum pressure safety 1/2 27458 Model and dimensions WMS 800 onnections imensions in mm ode number E F WMS 800 27 mm / 1 ext. 27 mm / 1 ext. 358 62 85 195 27455 PRESSURE LIMITER WMS 800 Models and dimensions Flexcon ombi-set Suitable for Length in mm onnections ode number Flexcon ombi-set 35-50 Flexcon vessels 35-50 litres 520 3/4 x 3 /4 27966 F E 15
PRESOR HETING SYSTEM ESSORIES TLE OF ONTENTS PGE PRESOR S FLEXON THERMO-PRESSURE GUGE complete range of safety valves 2/3 You can trust our advanced technology 4/5 (Thermo)pressure gauges filling/safety assemblies 6/7 Quick fixing and releasing 8/9 Funnels and miscellaneous items 10 Tables 11/15 b.v. P.O. ox 115 2800 Gouda - Holland Industriestraat 6 2802 Gouda - Holland Telephone: (+ 31) 182 591800 Fax: (+ 31) 182 522557 info@flamco.nl www.flamcogroup.com FLEXFST You will find much more information on the which accompanies this brochure. opyright b.v., Gouda, Holland. No part of this publication may be reproduced in any way without explicit reference to the source. The data listed apply solely to products. b.v. is in no way liable for the misuse of the equipment or incorrect interpretation of the technical information contained herein. We reserve the right to make technical alterations. FLEXONSOLE b.v. refers you further to its international sales and delivery conditions as drawn up by the latest version of Orgalime. 18501722