SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Product code : 91439 Manufacturer or supplier's details Company name of supplier : Kimberly-Clark Corporation Address : 14 Holcomb Bridge Road Roswell, GA 376-2199 Telephone : 1-888-346-4652 Emergency telephone number : 1-877-561-6587 SECTION 2. HAZARDS IDENTIFICATION Emergency Overview Physical state Colour Odour liquid purple pleasant Potential Health Effects Aggravated Medical Condition Symptoms of Overexposure : None known. : No hazards which require special first aid measures. SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS Substance / Mixture : Mixture Hazardous components Chemical Name CAS-No. Concentration (%) Sodium laureth sulfate 68585-34-2 >= 5 - < 1 Cocamidopropyl Betaine 61789-4- >= 1 - < 5 SECTION 4. FIRST AID MEASURES If inhaled : No hazards which require special first aid measures. In case of skin contact : Not required under normal use. Wash off with plenty of water. Get medical attention if irritation develops and persists. In case of eye contact : Flush eyes with water at least 15 minutes. Get medical atten- 1 / 6
tion if eye irritation develops or persists. If swallowed : Not required under normal use. Drink 1 or 2 glasses of water. If large quantities of this material are swallowed, call a physician immediately. Most important symptoms and effects, both acute and delayed : No hazards which require special first aid measures. None known. Notes to physician : No hazards which require special first aid measures. SECTION 5. FIREFIGHTING MEASURES Suitable extinguishing media : Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Hazardous combustion products Specific extinguishing methods Special protective equipment for firefighters : Carbon monoxide, carbon dioxide and unburned hydrocarbons (smoke). : Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. : In the event of fire, wear self-contained breathing apparatus. SECTION 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures : Not required under normal use. Environmental precautions : No special environmental precautions required. Methods and materials for containment and cleaning up : Flush with water. SECTION 7. HANDLING AND STORAGE Advice on safe handling : Avoid spillage on floor as the product can become very slippery when wet. Conditions for safe storage : No special storage conditions required. SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Components with workplace control parameters Contains no substances with occupational exposure limit values. Personal protective equipment Protective measures : No special protective equipment required. 2 / 6
Hygiene measures : not required under normal use SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance : liquid Colour Odour : purple : pleasant ph : 5.5 Melting point/range : No data available Boiling point/boiling range : > 212 C Flash point : not applicable Upper explosion limit : not applicable Lower explosion limit : not applicable Vapour pressure : < 24 hpa Relative density : 1.15-1.25 Solubility(ies) Water solubility : completely soluble SECTION 1. STABILITY AND REACTIVITY Incompatible materials : No information available. SECTION 11. TOXICOLOGICAL INFORMATION Acute toxicity Skin corrosion/irritation Classification: No skin irritation Result: No skin irritation Result: Skin irritation Serious eye damage/eye irritation Result: Mild eye irritation 3 / 6
Result: Eye irritation Respiratory or skin sensitisation Result: Does not cause skin sensitisation. Germ cell mutagenicity Carcinogenicity Reproductive toxicity STOT - single exposure Remarks: not applicable STOT - repeated exposure Remarks: not applicable Aspiration toxicity No aspiration toxicity classification SECTION 12. ECOLOGICAL INFORMATION Ecotoxicity Toxicity to fish Toxicity to daphnia and other aquatic invertebrates Toxicity to algae : LC5 (Fish): 1.11 mg/l Exposure time: 96 h : EC5: 1.9 mg/l Exposure time: 48 h : EC5: 5.6 mg/l Exposure time: 72 h Persistence and degradability Biodegradability : Result: Readily biodegradable. 4 / 6
Bioaccumulative potential Partition coefficient: n- octanol/water : Remarks: not applicable Mobility in soil No data available Other adverse effects No data available SECTION 13. DISPOSAL CONSIDERATIONS Disposal methods Waste from residues : Dispose of in accordance with local regulations. Contaminated packaging : Dispose of as unused product. SECTION 14. TRANSPORT INFORMATION International regulation Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Not applicable for product as supplied. National Regulations SECTION 15. REGULATORY INFORMATION WHMIS Classification : Not Rated SARA 311/312 Hazards : No SARA Hazards This product has been classified according to the hazard criteria of the CPR and the MSDS contains all of the information required by the CPR. Inventories AICS (Australia), DSL (Canada), IECSC (China), REACH (European Union), ENCS (Japan), ISHL (Japan), KECI (Korea), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA) 5 / 6
SECTION 16. OTHER INFORMATION Further information NFPA: Flammability HMIS III: HEALTH Health Instability FLAMMABILITY PHYSICAL HAZARD Special hazard. = not significant, 1 =Slight, 2 = Moderate, 3 = High The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. 6 / 6