Guide 1 Collet Chuck ccepts nylon, soft nylon and polyurethane tubes. as large retaining force. Release button (Inch-Orange, etric-gray) ow disconnecting force. When the fitting is removed from the tubing, the chuck and collet are released, thus preventing them from biting into the tube to an unnecessary degree. Unique shape allows easy tube release. acking Can be used for a wide range of pressure from a low vacuum up to a pressure of 15psi (1.0a). he use of a special profile ensures positive sealing and reduced resistance when the tube is being inserted. ube Body O-ring Stud ossible to insert tube in narrower space. he body and threaded portion can turn independently. Stud has electroless nickel plating. Standard preapplied thread sealant. (Except -2, ) Optimum piping in less space with 20% minituarization of the outside diameter Standard with thread sealant Can be used in applications where copper-free material is required. ossible to use in vacuum to 1.Ka ( orr) pplicable ube ube material ube O.D. Specifications rincipal Element aterial Nylon, Soft nylon, olyurethane Inch ø1/, ø5/2, ø1/ etric ø.2, o, ø NOE 1) Operating fluid ir, Water ax. operating pressure 15psi (1.0pa) ax. operating vacuum pressure 1.Ka ( orr) roof pressure 5psi(.0a) mbient and fluid temperature 2 to 10 F (-5 to 0 C), Water: 2 to 5 F (0 to 0 C) (no freezing) NSI/SEB1.20.1-19 ( thread), ortion Inch JIS B 02 2, Class 2B (-thread) Nut JIS B 02 2, Class 2B (-thread) ortion JIS B 020 (aper pipe thread) etric JIS B 0209, Class 2 (etric coarse thread) Nut JIS B 02, Class 2 (etric fine thread) Note1) pplicable for general industry water. Consult SC if using for other kinds of fluid. Surge pressure must be under the max. operating pressure. Body Stud Chuck, Guide Collet, Release button, Guide acking, O-ring SUS0, C0BD, B C0BD ( portion) SUS0 O NBR
odel exagon socket head male connector KJS. Internal hex allows thread connection by using an allen wrench, for confined space. Bulkhead union KJE. 20 Used to connect two tubes through a panel. Extended male elbow KJW. 15 he most appropriate use is when the elbow extends over a standard elbow for ease of connection/ disconnection of tubing. ale connector KJ. Use to pipe in the same direction from female threaded portion. ost general type. lug-in elbow KJ. 1 Use to change by 90 in a tube direction from One-touch fittings. Union Y KJU. 1 Use to branch connection of tubes in the same direction. Female union KJF. 1 Use to pipe from male threaded portion such as pressure gauge. Reducer elbow KJ. 15 Use to change by 90 in tube direction from One-touch fittings and to size down. Different union Y KJU. 1 Use to branch connection of tubes with size down in the same direction. Straight union KJ. 1 Use to connect tubes in the same direction. Branch tee KJ. 1 Use to branch line from female thread of both side 90 direction. lug-in Y KJU. 1 Use to branch tubing in the same direction from One-touch fittings. Different straight KJ. 1 Use to connect different size tubes. Union tee KJ. 1 Use to branch connection of tubes of both side 90 direction. Different plug in Y KJX. 19 Use to branch line of size down in the same direction from Onetouch fittings. ale elbow KJ. 1 Use to pipe in right angle to female threaded portion. ost general type. Different tee KJ. 1 Use to branch connection of tubes with size down in both side 90 direction. Branch Y KJU. 19 Use to branch line in the same direction from female thread. Union elbow KJ. 1 Use to connect tubes in right angle. ale run tee KJY. 1 Use to branch line in the same direction from female thread and in 90 direction. lug-in reducer KJR. 19 Use to change size of One-touch fittings. recautions Be sure to read before handling. Refer to ir Fittings & ubing recautions for other details. Interchangeability of and Series K Caution 1 Do not use the plug-in K Series with the KJ Series, it will not hold. 2 For combinations other than the plug-in Ks, they are interchangeable. Installation and Removal of One-touch ini Fittings Caution Installing ube 1 Cut the tube perpendicularly, using caution not to damage its O.D. surface. (Use tube cutter K-1, 2 or. Do not cut the tube with cutting pliers, nippers, scissors, etc.) 2 Grasp the tube, then slowly push it until it comes to a dead-end. hen pull it back gently to make sure that it does not pull out. Removing ube (Use one hand for removal.) 1 old the release button with the thumb and forefinger. 2 Grasp the tube with the remaining three fingers and palm. hen pull out the tube by the three fingers and palm while pushing in the release button with the thumb and the forefinger. o re-use the released tube, cut off the damaged portion of the tube.
ale connector: KJ Inch -2 pplicable tube () O.D. -2 1 1-2 5 2 1 1 KJ01-2 KJ01-S KJ01-S KJ0-2 KJ0-S KJ0-S KJ0-2 KJ0-S (ex.) 1. 1. 1. 1 19.5 1. 22 9.5. 9.5. -2 1 1 1. KJ0-S 1. 1. Reference dimensions after thread installation. 9. 1.9 15.5. 1 in. 2. 2 2. 2..5 5. 2....2 5.2-2 R() KJ etric pplicable (ex.) 0.5 KJ2-1. 1..2 5 0. KJ2-5 1. R() KJ2-01S 1. 9. 0.5 KJ0-1. 1. 5 0. KJ0-5 1 1.9 KJ0-01S. 5 0. KJ0-5 1. 1. 1.5 KJ0-01S 19. 15. Reference dimensions after R() thread installation. 1. 2. 1.9 2.. 5.2 exagon socket head male connector: KJS Inch -2 pplicable tube () O.D. (ex.) -2 KJS01-2 2 19. 5 2-2 KJS0-2 1. 1 1 KJS0-S 2. 19. KJS0-S. 1-2 1 1 KJS0-2 KJS0-S KJS0-S.5.. 19. 21.1 20.1 Reference dimensions after thread installation. 1. 15. 15. 1.5 1.1 1.1 2 2. in... 2. 2. 5.. 5. 5.2-2 KJS etric pplicable (ex.) 0.5 KJS2-1.5 1..2 5 0. KJS2-5 2 19. 0.5 KJS0-1.5 1. 5 0. KJS0-5 1. KJS0-01S 9. 19. 5 0. KJS0-5 19.5 KJS0-01S 20 Reference dimensions after R() thread installation. 1. 1. 1. 15. 15. 1. 1 1.5 1. 1. 1. 1. 1. 2. 1. 2. 5.. 5.2 R()
ale elbow: KJ Inch -2 pplicable () -2 (ex.) KJ01-2 1 1 KJ01-S 9.5. KJ01-S. -2 KJ0-2 5 2 1 1 KJ0-S 9.5 9. 15. KJ0-S. -2 KJ0-2 1 1 1 KJ0-S 9.5 1.1 KJ0-S. 1. Reference dimensions after thread installation. KJ etric pplicable.2 0.5 5 0. R() 0.5 5 0. 5 0. KJ2- KJ2-5 KJ2-01S KJ0- KJ0-5 KJ0-01S KJ0-5 KJ0-01S (ex.). 9.. 1 1 15. 1.1 1. Reference dimensions after R() thread installation. 2 1.2 1. 1. 1. 15. 15. 1. 1.9 15.9 15.1 1. 1. 1. 1. 1 20. 19. 2 1 1.1 1.2 15.2 1 1. 15. 1. 1. 1. 15. 15.1 1. 1. 1.5 1.5 in. 2. 5.9. 2. 2..5. 2..2 5.. 0. 0. 2. 0. 0..5.5.5.5 9 9-2 2.1. 2...2. Union elbow: KJ Inch pplicable KJ01-00 5 2 KJ0-00 1 KJ0-00. 9. 15 15. 1. 5... in. 1. 2. KJ etric pplicable.2 KJ2-00 KJ0-00 KJ0-00. 9.. 15 15. 1.1 5... 1.5 Nylon 2..5 9 Urethane.5 9 1. 2.1 1 lug-in elbow: KJ Inch pplicable 5 2 1 5 2 1 KJ01-99 KJ0-99 KJ0-99 Note) 1: max. diameter KJ etric pplicable.2 pplicable ød pplicable ød.2 Note) 1: max. diameter KJ2-99 KJ0-99 KJ0-99 1. 9. 1. 9.. 2. 2 1 1.5 15. 1. 1 1.5 15. 1. 2 2. 2. 2 2. 2. 2. 1. 19. 1. 19.1 1.5 in. 1 1.2 2.1 Nylon 2..5 9 Urethane.5 9 1 1.2 2
Reducer elbow: KJ Inch pplicable pplicable ød 5 1 2 KJ01-0 1 KJ01-0 5 2 1 KJ0-0 Note) 1: max. diameter 1. 9. 2 1 1.5.5 1..5 1.9 2 2. 25. 15. 1. 1. in. 1.1 1. 1.5 KJ etric pplicable pplicable fittings size ød KJ2-0.2 KJ2-0 KJ0-0 Note) 1: max. diameter 1 2 1 2. 1.5 2. 15. 25. 1 2. 9. 15. 25. 1.9.5.5 1.1 1.2 1. Extended male elbow: KJW Inch -2 pplicable () -2 (ex.) KJW01-2 1 1 KJW01-S 9.5. KJW01-S. -2 KJW0-2 5 2 1 1 KJW0-S 9.5 9. 15. KJW0-S. -2 KJW0-2 1 1 1 KJW0-S 9.5 1.1 KJW0-S. 1. Reference dimensions after thread installation. 1 2 2. 29. 25. 29. 25.9 2. 2. 29.9 0. 2.9 2.1 1 1.. 0. 2. in. 2..2.5 1. 2... 2..9. 1.2-2 KJW etric pplicable.2 0.5 5 0. R() 0.5 5 0. R() 5 0. KJW2- KJW2-5 KJW2-01S KJW0- KJW0-5 KJW0-01S KJW0-5 KJW0-01S (ex.). 9. 1 2 15. 1.1. R() 1. Reference dimensions after R() thread installation. 2 2.1 0. 0. 25.2 2. 25. 2. 2 25.1 0. 0. 25. 2. 2..5.5 2. 29..5.5 1.5 2. 0.5 9 9 5.2 1. 5.1..9 1.2 15
Branch tee: KJ Inch -2 pplicable () -2 (ex.) KJ01-2 1 1 KJ01-S 9.5. KJ01-S. -2 KJ0-2 5 2 1 1 KJ0-S 9.5 9. 15. KJ0-S. -2 KJ0-2 1 1 1 KJ0-S 9.5 1.1 KJ0-S. 1. Reference dimensions after thread installation. 1 2 1.2 1. 1. 1. 15. 15. 1. 1.9 15.9 15.1 1. 1. 1. 1. 1 20. 19. in. 2..2.. 2..5.9. 2.... -2 KJ etric pplicable.2 0.5 5 0. R() 0.5 5 0. R() 5 0. 1 2 (ex.) KJ2- KJ2-5 KJ2-01S KJ0- KJ0-5 KJ0-01S KJ0-5 KJ0-01S. 9. 15. 1.1. R() 1. Reference dimensions after R() thread installation. 1 1.1 1.2 1. 15.2 1 1. 15. 15.1 15. 1. 1. 1. 1. 1.5 1.5.2 2..5.5.5.5 2..2..1.5... Union tee: KJ Inch pplicable KJ01-00 5 2 KJ0-00 1 KJ0-00. 9. 15 15. 1. 5... in.. KJ etric pplicable.2 KJ2-00 KJ0-00 KJ0-00. 9.. 15 15. 1.1 5... 1.5 Nylon.2.5 Urethane 2..5 1
Different tee: KJ Inch pplicable a b 5 2 1 KJ0-0 5 2 KJ01-0 Note) 1, 2: max. diameter 1 2 9.. 9. 1 1. 2 15. 1. 1 5.. 2.. 1 2 in. 2..9 KJ etric pplicable 1 a b.2 KJ2-0 9. KJ0-0. Note) 1, 2: max. diameter 2. 9. 1 1. 2 15. 1. 1 5.. 2.. 1 1.5 2 Nylon.5 Urethane.5 2.. ale run tee: KJY Inch -2 pplicable () -2 (ex.) KJY01-2 1 1 KJY01-S 9.5. 15. KJY01-S. -2 KJY0-2 5 2 1 1 KJY0-S 9.5 9. 15. KJY0-S. -2 KJY0-2 1 1 1 KJY0-S 9.5 1. KJY0-S. 1.9 Reference dimensions after thread installation. 1 2 1. 1 1.2 2.9 1. 15. 1. 25. 1.9 15.9 2. 2. 15.1 29. 1. 1. 1.9 0. in. 2..2 5.1. 2..5 5.. 2..5..5-2 KJY etric pplicable.2 0.5 5 0. R() 0.5 5 0. KJY2- KJY2-5 KJY2-01S KJY0- KJY0-5 KJY0-01S KJY0-5 KJY0-01S (ex.). 1 15. 9. 15. R() 5 0. 1.1. R() 1.5 Reference dimensions after R() thread installation. 2 1.1 1. 1 2. 1.2 2.9 15.2 2 1 25.2 1. 25. 15. 1. 1. 2.5 2. 29. 1.5.2 2..5.5.5.5 2..2..1.5..5.5 1
Union Y : KJU Inch pplicable KJU01-00 5 2 KJU0-00 1 KJU0-00. 9. 1 2 19. 5..9 2.9 1. 9...9 2. 22.. 1. 1 2 in. 2. 5 KJU etric pplicable.2 KJU2-00 KJU0-00 KJU0-00. 9.. 1 2.9 1.2 2 19 1. 21.. 9.. 5... 1 1.5 2.9.9 1. Nylon.2.5 Urethane 2..5 2.. Different union Y : KJU Inch pplicable a b 5 2 1 KJU0-0 5 2 KJU01-0 Note) 1, 2: max. diameter 1 2. 9. 9. 1 2.5 0. 2 1. 20.. 9... 1 2.9 1. in. 2..9 KJU etric pplicable 1 2 a b.2 KJU2-0. 9. KJU0-0 9.. Note) 1, 2: max. diameter 1 2.5 29.2 2 1. 19.. 9... 1 2.9 1..5.5 2.. lug-in Y : KJU Inch pplicable pplicable ød 5 2 1 5 2 1 KJU01-99 KJU0-99 KJU0-99 Note) 1: max. diameter 1. 9. 2.5. 9.9. 9..1 5. 9. in. 2..2. KJU etric pplicable.2 pplicable fittings size ød.2 Note) 1: max. diameter KJU2-99 KJU0-99 KJU0-99 1. 9.. 2.5... 9...1 5.. 1.5.2 2..5.5 2..2.5 1
Different lug-in Y : KJX Inch pplicable pplicable ød 5 2 5 2 1 KJX01-0 KJX0-0 Note) 1: max. diameter 1. 9. 2 5.. 9. 5. in. 2.. KJX etric pplicable pplicable fittings size ød.2 KJX2-0 KJX0-0 Note) 1: max. diameter 1. 9. 2 5.. 9. 5.5.5.5 2..5 Branch Y : KJU Inch -2 pplicable 1 1 5 2 () -2-2 1 1 KJU01-2 KJU01-S KJU01-S KJU0-2 KJU0-S KJU0-S KJU0-2 KJU0-S (ex.).. 1. 9. 2-2 1 1 1. KJU0-S Reference dimensions after thread installation. Note) 1: max. diameter KJU etric pplicable (ex.).2 5 0. 5 0. 5 0. KJU2-5 KJU0-5 KJU0-5 R() R() R() KJU2-01S KJU0-01S KJU0-01S. 9.. Reference dimensions after R() thread installation. Note) 1: max. diameter 1 2 0..1 1.. 5.5 9 0..1 1....9 2.5. 0.1 9. 0. 2. 5 in. 2. 5.9.1. 2....5. 2...5. 2.5 0.1.2 2. 9. 0..5.5. 0. 1.5 2.9 5.9.... 9.9-2 lug-in reducer: KJR Inch pplicable pplicable ød 5 1 2 KJR01-0 1 KJR01-0 5 2 1 KJR0-0. 9. 2.5 19. 19. 19.9 in. 0.9 1.2 1. KJR etric pplicable pplicable fittings size ød KJR2-0.2 KJR2-0 KJR0-0. 9. 2.5 19. 19.5 20 0.9 1.1 1. 19
Bulkhead union: KJE Inch pplicable 5 2 1 pplicable.2 KJE01-00 KJE0-00 KJE0-00 KJE etric KJE2-00 KJE0-00 KJE0-00 ounting in. () (ex.) -2 2.5.1-2 2.5 1 2-20 15. 2. 1 15. 0.5 9 0.5 0.5 (ex.) 1 2 2 2. ounting 9 1.5 5..5 20