SAFETY DATA SHEET. Identification Product identifier Black Magic 2-in- Leather Treatment Other means of identification 3625 Recommended use Leather Care Recommended restrictions known. Manufacturer/Importer/Supplier/Distributor information Manufacturer Company name ITW Permatex Address 35 Brownridge Road, Unit Halton Hills, ON L7G C6 Telephone -95-693-89 e-mail Emergency phone number -877-54-9352 Supplier See above. 2. Hazard identification Physical hazards Health hazards Environmental hazards Label elements Hazard symbol Signal word Hazard statement Precautionary statement Prevention Response Storage Disposal Other hazards Supplemental information The mixture does not meet the criteria for classification. Observe good industrial hygiene practices. Wash hands after handling. Store away from incompatible materials. Dispose of waste and residues in accordance with local authority requirements. known. 3. Composition/information on ingredients Mixtures Non hazardous by WHMIS Criteria. Inhalation Skin contact Eye contact Ingestion Most important symptoms/effects, acute and delayed Indication of immediate medical attention and special treatment needed 4. First-aid measures If symptoms develop move victim to fresh air. If symptoms persist, obtain medical attention. Flush with cool water. Wash with soap and water. Obtain medical attention if irritation persists. Flush with cool water. Remove contact lenses, if applicable, and continue flushing. Obtain medical attention if irritation persists. Rinse mouth. Do not induce vomiting. If vomiting occurs naturally, have victim lean forward to reduce risk of aspiration. Never give anything by mouth if victim is unconscious, or is convulsing. Obtain medical attention. Treat patient symptomatically. #27287 Page: of 5
General information Suitable extinguishing media Unsuitable extinguishing media Specific hazards arising from the chemical Hazardous combustion Special protective equipment and precautions for firefighters Fire fighting equipment/instructions Specific methods General fire hazards Personal precautions, protective equipment and emergency procedures Methods and materials for containment and cleaning up Environmental precautions Precautions for safe handling Conditions for safe storage, including any incompatibilities Occupational exposure limits Biological limit values Appropriate engineering controls If you feel unwell, seek medical advice (show the label where possible). Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. Show this safety data sheet to the doctor in attendance. Avoid contact with eyes and skin. Keep out of reach of children. 5. Fire-fighting measures Water fog. Foam. Dry chemical powder. Carbon dioxide. During fire, gases hazardous to health may be formed. Self-contained breathing apparatus and full protective clothing must be worn in case of fire. Move containers from fire area if you can do so without risk. Use standard firefighting procedures and consider the hazards of other involved materials. No unusual fire or explosion hazards noted. 6. Accidental release measures Keep unnecessary personnel away. For personal protection, see section 8. Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth and place into containers. Never return spills in original containers for re-use. Following product recovery, flush area with water. Clean surface thoroughly to remove residual contamination. For waste disposal, see section 3 of the SDS. Do not discharge into lakes, streams, ponds or public waters. 7. Handling and storage Observe good industrial hygiene practices. When using do not eat or drink. Wash thoroughly after handling. Store in original tightly closed container. Store away from incompatible materials (see Section of the SDS). Keep out of reach of children. 8. Exposure controls/personal protection No exposure limits noted for ingredient(s). No biological exposure limits noted for the ingredient(s). Ensure adequate ventilation. Individual protection measures, such as personal protective equipment Safety glasses Eye/face protection Skin protection Hand protection Other Respiratory protection Thermal hazards General hygiene considerations Appearance Physical state Form Colour Odour Odour threshold Rubber gloves. Confirm with a reputable supplier first. As required by employer code. Where exposure guideline levels may be exceeded, use an approved NIOSH respirator. Not applicable. Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and immediately after handling the product. When using do not eat or drink. Liquid Liquid. Liquid. Off white Mild 9. Physical and chemical properties #27287 Page: 2 of 5
ph 7.5-8.5 Melting point/freezing point Initial boiling point and boiling range Flash point Evaporation Rate Flammability (solid, gas) > C (> 22 F) Not applicable. Upper/lower flammability or explosive limits Flammability limit - lower Flammability limit - upper Explosive limit - lower Explosive limit upper Vapour pressure Vapour density Relative density.93 -.95 @ 2 C Solubility(ies) Solubility (Water) Partition coefficient (n-octanol/water) Auto-ignition temperature Decomposition temperature Viscosity Other information Density Explosive properties Oxidizing properties Soluble 7.74 g/cm3 VOC (Weight %) < % Not explosive. Not oxidising.. Stability and reactivity Reactivity Chemical stability Possibility of hazardous reactions Conditions to avoid Incompatible materials Hazardous decomposition May react with incompatible materials. Material is stable under normal conditions. Hazardous polymerisation does not occur. Do not mix with other chemicals. Strong oxidizing agents. No hazardous decomposition are known.. Toxicological information Information on likely routes of exposure Inhalation Prolonged inhalation may be harmful. Skin contact Eye contact Ingestion Symptoms related to the physical, chemical and toxicological characteristics Information on toxicological effects No adverse effects due to skin contact are expected. May cause stomach distress, nausea or vomiting. Acute toxicity Skin corrosion/irritation Exposure minutes Erythema value Oedema value Prolonged skin contact may cause temporary irritation. #27287 Page: 3 of 5
Serious eye damage/eye irritation Corneal opacity value Iris lesion value Conjunctival reddening value Conjunctival oedema value Recover days Respiratory or skin sensitisation Respiratory sensitisation Not a respiratory sensitizer. Skin sensitisation Germ cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity - single exposure Specific target organ toxicity - repeated exposure Aspiration hazard Chronic effects Further information This product is not expected to cause skin sensitisation. No data available to indicate product or any components present at greater than.% are mutagenic or genotoxic. See below. This product is not expected to cause reproductive or developmental effects. Not an aspiration hazard. Prolonged inhalation may be harmful. This product has no known adverse effect on human health. 2. Ecological information Ecotoxicity Persistence and degradability Bioaccumulative potential Mobility in soil Mobility in general Other adverse effects Disposal instructions Local disposal regulations Hazardous waste code Waste from residues / unused Contaminated packaging No data is available on the degradability of this product. No data available. No data available. No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component. 3. Disposal considerations Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Dispose in accordance with all applicable regulations. The waste code should be assigned in discussion between the user, the producer and the waste disposal company. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions). Since emptied containers may retain product residue, follow label warnings even after container is emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal. 4. Transport information General : TDG Proof of Classification: In accordance with Part 2.2. (SOR/24-52) of the Transportation of Dangerous Goods Regulations, we certify that the classification of this product is correct as of the SDS date of issue. If applicable, the technical name and the classification of the product will appear below. Transportation of Dangerous Goods (TDG- ) Not regulated as dangerous goods. Canadian federal regulations Export Control List (CEPA 999, Schedule 3) Not listed. Greenhouse Gases Not listed. 5. Regulatory information This product has been classified in accordance with the hazard criteria of the HPR and the SDS contains all the information required by the HPR. #27287 Page: 4 of 5
Precursor Control Regulations Not regulated. WHMIS status Controlled Inventory Status Country(s) or region Inventory Name On Inventory (Yes/No)* Domestic Substances List (DSL) Yes Non-Domestic Substances List (NDSL) No *A"Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) 6. Other information Severe Serious Moderate Slight Minimal LEGEND 4 3 2 HEALTH FLAMMABILITY PHYSICAL HAZARD PERSONAL PROTECTION / X Issue date Revision date Version # Other information Disclaimer Prepared by 3-May-26 3-May-26 For an updated SDS, please contact the supplier/manufacturer listed on the first page of the document. Information contained herein was obtained from sources considered technically accurate and reliable. While every effort has been made to ensure full disclosure of product hazards, in some cases data is not available and is so stated. Since conditions of actual product use are beyond control of the supplier, it is assumed that users of this material have been fully trained according to the requirements of all applicable legislation and regulatory instruments. No warranty, expressed or implied, is made and supplier will not be liable for any losses, injuries or consequential damages which may result from the use of or reliance on any information contained in this document. Dell Tech Laboratories Ltd. Phone: (59) 858-52 #27287 Page: 5 of 5