FLP Laser Pistol Frame OPERATING INSTRUCTIONS FLP Laser Pistol Frame FLP with LB 16 laser barrel FLP with LC 14 laser container Address Phones Identification Numbers E-mail Czech Republic Page - 1 -
1.Description 1 2 4 5 3 1. Fixing adapter for laser emitter and accessories 2. Loading lever 3. Trigger 4. Rear sight 5. Wooden grip FLP laser pistol frame is designed for use with the PENTASHOT laser emitters LC 14 laser container and LB 16 laser barrel in the instructional courses, trainings or modern pentathlon competitions. FLP laser pistol frame initiates laser beam by triggering after loading with loading lever. FLP laser pistol frame has single shot trigger system. Safety Instructions and Important Notice for use of laser emitters with FLP: LASER RADIATION DO NOT LOOK DIRECTLY INTO LASER BEAM! CLASS I. LASER DEVICE - The PENTASHOT laser emitters LC14 and LB 16 are a Class I. laser shooting device, laser emitter follows the standard EN 60825-2014. - It is forbidden to open or modify the FLP 12 pistol s laser emitter, excluding change of battery or grip. It may expose the user to dangerous laser radiation. - Never aim at people, animals or uncontrolled areas. - While handling the weapon, observe the general rules for manipulation with a real weapon. - Do not look into laser beam directly or through any optical device. Address Phones Identification Numbers E-mail Czech Republic Page - 2 -
- Read carefully the Operating Instructions before using the FLP laser pistol frame with laser emitter.. - Don t use equipment for purposes other than those which it is addressed. - Pistol must be used in accordance with this Instructions only. - FLP laser pistol frame must be protect against strong sun and rain in accordance with the UIPM Rules, part 5.9.4 vi) - Follow instructions for the PENTASHOT laser emitters by use with the FLP laser pistol frame. - WARNING! Failure to follow these instructions may expose the user to dangerous laser radiation. 2. Rear sight setting Check zeroing with the white wall shot from the distance of 10 meters. You should see a red dot impact. Use the rear sights for zeroing. Turning the screw (6a) clockwise you take aim to the right Turning the screw (6a) counterclockwise you take aim to the left 6a Address Phones Identification Numbers E-mail Czech Republic Page - 3 -
Turning the screw (6b) clockwise you take aim downward Turning the screw (6b) counterclockwise you take aim upward 6b HINT: The laser container check and zeroing should only be performed by watching the red dot within the target area from 5 meters min. 3. Trigger Settings 7 8 9 Address Phones Identification Numbers E-mail Czech Republic Page - 4 -
Overlap / pos.7/ The sear engagement is already exactly adjusted by the factory and must not be changed. First stage weight /pos.8/ Turning the screw clockwise increases the first stage trigger weight. Turning the screw countercklockewise reduces the first stage trigger weight. First stage travel /pos.9/ Turning the screw clockwise reduce the first stage travel. Turning the screw counterclockwise increase the first stage travel. Trigger position setting 10 11 After loosening the screw /10/ you can change the position of the trigger forward and backward. After loosening the screw /11/ you can change the position of the trigger around. Address Phones Identification Numbers E-mail Czech Republic Page - 5 -
4.Maintenance Keep the FLP laser pistol frame clean by wiping the dust out of them using a dry cloth. Do not use any cleaning agents, solvents and chemical preparations. Possible Defects and Their Removal The laser beam impact is evaluated anywhere else but not where the weapon aims. Do new adjustment. Check correct function of target. 5.Environmental Protection The FLP laser pistol frame must not be dumped into the dustbin. Collect the FLP frame dispose of them at collection points. 10.Technical parameters Parameter name Value Dimensions 410 mm x 150 mm x 50 mm ( with LB 16 laser barrel ) Trigger system type single shot full laser pistol Mechanical lever movement 35 min 410 mm x 150 mm x 50 mm ( with LC 14 laser container ) Weight 860 g (with LB 16 laser barrel) 915 g ( with LC 14 laser container ) Approved Laser emitters PENTASHOT LB 16 PENTASHOT LC 14 laser barrel Laser class I.(in accordance with the EN 60825 : 2014 ) Wavelength 650 nm ±5 nm Laser beam diameter 4 mm±5% / 10 m Laser coding 15,6 ms UIPM laser signal Laser class certificate LC 14 laser container LB 16 laser barrel Minimum laser peak value (empty battery) 2,5 mw Maximum laser peak value (full battery ) 3,2 mw Recommended shooting distance up to 10m Number of shoots done with 1 pc battery min. 40 000 /at 20 C No: 1140735 (EZU TESTING INSTITUTE, CZECH REPUBLIC) No: 1150658 (EZU TESTING INSTITUTE, CZECH REPUBLIC) Emitter power supply 1,5V AAA Alcaline battery for LB 16 laser barrel Operating conditions +10 C to +42 C, IP 52* All technical parameters are stable over the full temperature range 1,5V AA Alcaline battery for LC 14 laser container *while respecting the UIPM Rules, part 5.9.4 vi) Address Phones Identification Numbers E-mail Czech Republic Page - 6 -