for Certificate No.: IECEx TSA 10.0014 Issue No.: 2 Equipment: The Series 1200 range of blanking plugs, reducers and conversions are manufactured from mild steel, stainless steel or brass alloy and are intended for application to Group I/IIC flameproof (Ex d) equipment. Mild steel versions may be zinc electroplated. Blanking plugs may be provided in either metric or BSP thread types and have hexagon heads. Alternatively, metric blanking plugs may be provided with a hexagon socket round head. s are provided with metric (external) to metric (internal) or BSP (external) to metric (internal) threads and have hexagon heads. Conversions are provided with metric (external) to metric (internal) or BSP (internal) to metric (external) threads and have hexagon heads. Metric threads are 1.5 mm pitch and 6H/6g tolerance quality. BSP threads are Class A tolerance quality. The Series 1200 range has an IP66 rating when install using Fluid Film GEL BW or Fluid Film LIQUID AR applied to the threads, in accordance with the manufacturer s instructions. The various sizes and types of threaded blanking plugs, reducers and conversions are listed in the following Schedules. Schedule 1 Series 1200 Metric Blanking Plugs* Plug Recommended Torque (Nm) M20 Metric 20 1.5 18 6g 65 M25 Metric 25 1.5 18 6g 95 M32 Metric 32 1.5 18 6g 110 M40 Metric 40 1.5 18 6g 130 M50 Metric 50 1.5 18 6g 165 M63 Metric 63 1.5 18 6g 195 M80 Metric 80 1.5 18 6g 280 * Metric blanking plugs may be provided with alternative metric thread sizes (eg M28, M45, etc) in the range between M20 to M80, which do not appear in Schedule 1. Alternative metric thread sizes are 1.5 mm pitch and tolerance quality 6g. Schedule 2 Series 1200 Metric s* M25 / M20 Metric 25 / 20 1.5 18 / 24 6g / 6H M32 / M20 Metric 32 / 20 1.5 18 / 24 6g / 6H M32 / M25 Metric 32 / 25 1.5 18 / 24 6g / 6H M40 / M20 Metric 40 / 20 1.5 18 / 26 6g / 6H Page 1 of 6
for Certificate No.: IECEx TSA 10.0014 Issue No.: 2 Series 1200 Metric s* M40 / M25 Metric 40 / 25 1.5 18 / 26 6g / 6H M40 / M32 Metric 40 / 32 1.5 18 / 26 6g / 6H M50 / M20 Metric 50 / 20 1.5 18 / 26 6g / 6H M50 / M25 Metric 50 / 25 1.5 18 / 26 6g / 6H M50 / M32 Metric 50 / 32 1.5 18 / 26 6g / 6H M50 / M40 Metric 50 / 40 1.5 18 / 26 6g / 6H M63 / M20 Metric 63 / 20 1.5 18 / 28 6g / 6H M63 / M25 Metric 63 / 25 1.5 18 / 28 6g / 6H M63 / M32 Metric 63 / 32 1.5 18 / 28 6g / 6H M63 / M40 Metric 63 / 40 1.5 18 / 28 6g / 6H M63 / M50 Metric 63 / 50 1.5 18 / 28 6g / 6H M80 / M20 Metric 80 / 20 1.5 18 / 28 6g / 6H M80 / M25 Metric 80 / 25 1.5 18 / 28 6g / 6H M80 / M32 Metric 80 / 32 1.5 18 / 28 6g / 6H M80 / M40 Metric 80 / 40 1.5 18 / 28 6g / 6H M80 / M50 Metric 80 / 50 1.5 18 / 28 6g / 6H M80 / M63 Metric 80 / 63 1.5 18 / 28 6g / 6H * Metric reducers may be provided with alternative metric thread sizes (eg M28, M45, etc) in the range between M20 to M80, which do not appear in Schedule 2. Alternative metric thread sizes are 1.5 mm pitch and tolerance quality 6H/6g, as applicable. Schedule 3 Series 1200 Metric Conversions Conversion M25 / M20 Metric 25 / 20 1.5 18 / 24 6H / 6g M32 / M25 Metric 32 / 25 1.5 18 / 24 6H / 6g M40 / M32 Metric 40 / 32 1.5 18 / 26 6H / 6g M50 / M40 Metric 50 / 40 1.5 18 / 26 6H / 6g M63 / M50 Metric 63 / 50 1.5 18 / 28 6H / 6g Page 2 of 6
for Certificate No.: IECEx TSA 10.0014 Issue No.: 2 Schedule 4 Series 1200 BSP Blanking Plugs Plug 2 ½" BSP BSP 75.184 2.309 25 Class A¹ 3 " BSP BSP 87.884 2.309 25 Class A¹ ¹ ISO 228-1, ISO 228-2 Schedule 5 Series 1200 BSP to Metric s Dia Pitch 2 ½" BSP / M20 BSP / Metric 75.184 / 20 2.309 / 1.5 25 / 35 Class A¹ / 6H 2 ½" BSP / M25 BSP / Metric 75.184 / 25 2.309 / 1.5 25 / 35 Class A¹ / 6H 2 ½" BSP / M32 BSP / Metric 75.184 / 32 2.309 / 1.5 25 / 35 Class A¹ / 6H 2 ½" BSP / M40 BSP / Metric 75.184 / 40 2.309 / 1.5 25 / 35 Class A¹ / 6H 2 ½" BSP / M50 BSP / Metric 75.184 / 50 2.309 / 1.5 25 / 35 Class A¹ / 6H 2 ½" BSP / M63 BSP / Metric 75.184 / 63 2.309 / 1.5 25 / 35 Class A¹ / 6H 3" BSP / M20 BSP / Metric 87.884 / 20 2.309 / 1.5 25 / 35 Class A¹ / 6H 3" BSP / M25 BSP / Metric 87.884 / 25 2.309 / 1.5 25 / 35 Class A¹ / 6H 3" BSP / M32 BSP / Metric 87.884 / 32 2.309 / 1.5 25 / 35 Class A¹ / 6H 3" BSP / M40 BSP / Metric 87.884 / 40 2.309 / 1.5 25 / 35 Class A¹ / 6H 3" BSP / M50 BSP / Metric 87.884 / 50 2.309 / 1.5 25 / 35 Class A¹ / 6H 3" BSP / M63 BSP / Metric 87.884 / 63 2.309 / 1.5 25 / 35 Class A¹ / 6H ¹ ISO 228-1, ISO 228-2 Schedule 6 Series 1200 BSP to Metric Conversions Dia Pitch 2 ½" BSP / M63 BSP / Metric 75.184 / 63 2.309 / 1.5 25 / 35 Class A¹ / 6H ¹ ISO 228-1, ISO 228-2 Page 3 of 6
for Certificate No.: IECEx TSA 10.0014 Issue No.: 2 Schedule 7 Series 1200 Blanking Plugs, s and Conversions Manufacturer s Recommended Tightening Torque Values Metric Size Recommended Torque (Nm) BSP Size (inch) Recommended Torque (Nm) 20 40 2½ 150 25 55 3 180 32 65 40 80 50 100 63 115 80 160 For metric blanking plugs or reducers in the thread size range between M20 M80, which do not appear in Schedule 7, the recommended torque value is to be equal to that of the next thread size above (eg for M28, the recommended torque value would be equal to that required for M32, etc). Drawing list pertaining to Issue 0 of this Certificate: Drawing/ Document No.: Page/s: Title: Revision Level: Date: (yyyy-mm-dd) 1200-01 1 ATF Mining Electrics Series 1200 Metric Blanking Plugs General Details 1200-02 1 ATF Mining Electrics Series 1200 Metric ed Entry s General Details 1200-03 1 ATF Mining Electrics Series 1200 Metric to Metric Conversions General Details 1200-04 1 ATF Mining Electrics Series 1200 BSP Blanking Plugs General Details 1200-05 1 ATF Mining Electrics Series 1200 BSP to Metric ed Entry s General Details 1200-06 1 ATF Mining Electrics Series 1200 BSP to Metric Conversions General Details 6 2011-02-28 6 2011-02-28 Page 4 of 6
for Certificate No.: IECEx TSA 10.0014 Issue No.: 2 Variations pertaining to Issue 1 of this Certificate: Schedule of Variations Addition of an M28/M20 reducer to the existing range of reducers. Schedule 8. Series 1200 Metric s* M25 / M20 Metric 25 / 20 1.5 18 / 24 6g / 6H M28 / M20 Metric 28 / 20 1.5 18 / 24 6g / 6H M32 / M20 Metric 32 / 20 1.5 18 / 24 6g / 6H M32 / M25 Metric 32 / 25 1.5 18 / 24 6g / 6H M40 / M20 Metric 40 / 20 1.5 18 / 26 6g / 6H M40 / M25 Metric 40 / 25 1.5 18 / 26 6g / 6H M40 / M32 Metric 40 / 32 1.5 18 / 26 6g / 6H M50 / M20 Metric 50 / 20 1.5 18 / 26 6g / 6H M50 / M25 Metric 50 / 25 1.5 18 / 26 6g / 6H M50 / M32 Metric 50 / 32 1.5 18 / 26 6g / 6H M50 / M40 Metric 50 / 40 1.5 18 / 26 6g / 6H M63 / M20 Metric 63 / 20 1.5 18 / 28 6g / 6H M63 / M25 Metric 63 / 25 1.5 18 / 28 6g / 6H M63 / M32 Metric 63 / 32 1.5 18 / 28 6g / 6H M63 / M40 Metric 63 / 40 1.5 18 / 28 6g / 6H M63 / M50 Metric 63 / 50 1.5 18 / 28 6g / 6H M80 / M20 Metric 80 / 20 1.5 18 / 28 6g / 6H M80 / M25 Metric 80 / 25 1.5 18 / 28 6g / 6H M80 / M32 Metric 80 / 32 1.5 18 / 28 6g / 6H M80 / M40 Metric 80 / 40 1.5 18 / 28 6g / 6H M80 / M50 Metric 80 / 50 1.5 18 / 28 6g / 6H M80 / M63 Metric 80 / 63 1.5 18 / 28 6g / 6H * Metric reducers may be provided with alternative metric thread sizes (eg M28, M45, etc) in the range between M20 to M80, which do not appear in Schedule 2. Alternative metric thread sizes are 1.5 mm pitch and tolerance quality 6H/6g, as applicable. Page 5 of 6
for Certificate No.: IECEx TSA 10.0014 Issue No.: 2 Drawings pertaining to Issue 1 of this Certificate: Drawing/Document No.: Page/s: Title: Revision Level: 1200-02 1 ATF Mining Electrics Series 1200 Metric ed Entry s General Details Date: (yyyy-mm-dd) 7 2012-08-24 Variations pertaining to Issue 2 of this Certificate: 1. Applicant name changed to ATF Mining Electrics Pty Ltd, was Ampcontrol Pty Ltd Incorporating ATF Mining Electrics Pty Ltd. 2. Changed of manufacturing location to 17 Old Punt Road, Tomago NSW 2322, was 39 Munibung Road, Cardiff NSW 2285. 3. Two additional manufacturer s locations were added. Conditions Relating to Variations Permitted by Issue 2: All previous conditions still apply. Page 6 of 6