5 MINUTE EPOXY RESIN Page 1 1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING Product name: Use of substance / preparation: Quick Set Epoxy Adhesive - Resin Product code: RS 406-9592, 850-934 Epoxy resin preparation Supplier: RS Components Ltd, Birchington Road, Corby, Northants, NN17 9RS, Tel: +44 (0) 1536 402888 (8am to 8pm) Fax: +44 (0) 1536 401588 Revision No: 4 RS REACH MSDS Date 01/10/08 Email: technical.help@rs-components.com 2. HAZARDS IDENTIFICATION Main hazards: Irritating to eyes and skin. May cause sensitisation by skin contact. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. 3. COMPOSITION / INFORMATION ON INGREDIENTS Hazardous ingredients: BISPHENOL- F TYPE EPOXY RESIN 10-30% CAS: 28064-14-4 [Xi] R36/38; [Sens.] R43; [N] R51/53 BISPHENOL A-(EPICHLORHYDRIN) {REACTION PRODUCT} 70-90% EINECS: 500-033-5 CAS: 25068-38-6 [Xi] R36/38; [Sens.] R43; [N] R51/53 4. FIRST AID MEASURES (SYMPTOMS) Skin contact: Eye contact: Ingestion: Inhalation: There may be irritation and redness at the site of contact. There may be irritation and redness. The eyes may water profusely. There may be soreness and redness of the mouth and throat. Exposure may cause coughing or wheezing. 4. FIRST AID MEASURES (ACTION) Skin contact: Remove all contaminated clothes and footwear immediately unless stuck to skin. Wash immediately with plenty of soap and water. Consult a doctor. Eye contact: Bathe the eye with running water for 15 minutes. Transfer to hospital for specialist examination. Ingestion: Wash out mouth with water. Do not induce vomiting. Give 1 cup of water to drink every 10 minutes. Consult a doctor. Inhalation: Remove casualty from exposure ensuring one's own safety whilst doing so. Consult a doctor.
5 MINUTE EPOXY RESIN Page 2 5. FIRE-FIGHTING MEASURES Extinguishing media: Exposure hazards: Protection of fire-fighters: Water spray. Carbon dioxide. Dry chemical powder. In combustion emits toxic fumes. Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes. 6. ACCIDENTAL RELEASE MEASURES Personal precautions: Environmental precautions: Clean-up procedures: Do not attempt to take action without suitable protective clothing - see section 8 of SDS. Turn leaking containers leak-side up to prevent the escape of liquid. Do not discharge into drains or rivers. Contain the spillage using bunding. Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for disposal by an appropriate method. 7. HANDLING AND STORAGE Handling requirements: Storage conditions: Suitable packaging: Avoid direct contact with the substance. Smoking is forbidden. Store in cool, well ventilated area. Keep container tightly closed. Must only be kept in original packaging. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering measures: Respiratory protection: Hand protection: Eye protection: Skin protection: Ensure there is sufficient ventilation of the area. Self-contained breathing apparatus must be available in case of emergency. Impermeable gloves. Safety glasses. Ensure eye bath is to hand. Impermeable protective clothing. 9. PHYSICAL AND CHEMICAL PROPERTIES State: Liquid Colour: Pale yellow Odour: Perceptible odour Solubility in water: Insoluble Viscosity value: 8000~15000 Boiling point/range C: >200 Flash point C: >150 Relative density: 1.17 10. STABILITY AND REACTIVITY Stability: Conditions to avoid: Materials to avoid: Stable under normal conditions. Heat. Strong oxidising agents. Strong acids. Strong bases.
5 MINUTE EPOXY RESIN Page 3 Haz. decomp. products: In combustion emits toxic fumes. 11. TOXICOLOGICAL INFORMATION Acute toxicity: Hazardous ingredients: Chronic toxicity: Routes of exposure: 5 MINUTE EPOXY RESIN ORL RAT LD50 >5000 mg/kg BISPHENOL A-(EPICHLORHYDRIN) {REACTION PRODUCT} ORL MUS LD50 15600 mg/kg ORL RAT LD50 11400 mg/kg SKN RBT LD50 >20 ml/kg May cause sensitisation by skin contact. Refer to section 4 of SDS for routes of exposure and corresponding symptoms. 12. ECOLOGICAL INFORMATION Mobility: Persistence and degradability: Other adverse effects: Insoluble in water. Not readily biodegradable. Toxic to aquatic organisms. 13. DISPOSAL CONSIDERATIONS Disposal operations: Disposal of packaging: NB: D10 Incineration on land. Dispose of in a regulated landfill site or other method for hazardous or toxic wastes. The user's attention is drawn to the possible existence of regional or national regulations regarding disposal. 14. TRANSPORT INFORMATION ADR / RID UN no: 3082 ADR Class: 9 Packing group: III Classification code: M6 Shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. BISPHENOL (A-(EPICHLORHYDRIN) {REACTION PRODUCT}) Hazard ID no: 90 IMDG / IMO UN no: 3082 Class: 9 Packing group: III EmS: F-A,S-F Marine pollutant:.
5 MINUTE EPOXY RESIN Page 4 IATA / ICAO UN no: 3082 Class: 9 Packing group: III Packing instructions: 914 15. REGULATORY INFORMATION Hazard symbols: Irritant. Dangerous for the environment. Risk phrases: R36/38: Irritating to eyes and skin. R43: May cause sensitisation by skin contact. R51/53: Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Safety phrases: S2: Keep out of the reach of children. S24/25: Avoid contact with skin and eyes. S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S29: Do not empty into drains. S37: Wear suitable gloves. S57: Use appropriate container to avoid environmental contamination. S60: This material and its container must be disposed of as hazardous waste. S61: Avoid release to the environment. Refer to special instructions / safety data sheets. Precautionary phrases: Contains epoxy constituents. See information supplied by the manufacturer. Haz. ingredients (label): BISPHENOL- F TYPE EPOXY RESIN; BISPHENOL A-(EPICHLORHYDRIN) {REACTION PRODUCT} Note: The regulatory information given above only indicates the principal regulations specifically applicable to the product described in the safety data sheet. The user's attention is drawn to the possible existence of additional provisions which complete these regulations. Refer to all applicable national, international and local regulations or provisions. 16. OTHER INFORMATION Risk phrases used in s.3: R36/38: Irritating to eyes and skin. R43: May cause sensitisation by skin contact. R51/53: Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
5 MINUTE EPOXY RESIN Page 5 Legal disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any damage resulting from handling or from contact with the above product. [final page]
5 MINUTE EPOXY HARDENER Page 1 1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING Product name: Use of substance / preparation: Quick Set Epoxy Adhesive - Hardener Product code: RS 406-9592, 850-934 Epoxy hardener preparation Supplier: RS Components Ltd, Birchington Road, Corby, Northants, NN17 9RS, Tel: +44 (0) 1536 402888 (8am to 8pm) Fax: +44 (0) 1536 401588 Issued: 06/05/08 Revision No: 4 RS REACH MSDS Date 01/10/08 Email: technical.help@rs-components.com 2. HAZARDS IDENTIFICATION Main hazards: No significant hazard. 3. COMPOSITION / INFORMATION ON INGREDIENTS Hazardous ingredients: 2,4,6-TRIS(DIMETHYLAMINOMETHYL)PHENOL 10-30% EINECS: 202-013-9 CAS: 90-72-2 [Xn] R22; [Xi] R36/38 4. FIRST AID MEASURES (SYMPTOMS) Skin contact: Eye contact: Ingestion: Inhalation: There may be mild irritation at the site of contact. There may be irritation and redness. There may be irritation of the throat. Irritate the respiratory tract. 4. FIRST AID MEASURES (ACTION) Skin contact: Wash immediately with plenty of soap and water. Remove all contaminated clothes and footwear immediately unless stuck to skin. Consult a doctor. Eye contact: Bathe the eye with running water for 15 minutes. Consult a doctor. Ingestion: Wash out mouth with water. If conscious, give half a litre of water to drink immediately. Give 1 cup of water to drink every 10 minutes. Consult a doctor. Inhalation: Remove casualty from exposure ensuring one's own safety whilst doing so. 5. FIRE-FIGHTING MEASURES Extinguishing media: Exposure hazards: Carbon dioxide. Foam. Water. Dry chemical powder. In combustion emits toxic fumes.
Issued: 06/05/08 5 MINUTE EPOXY HARDENER Page 2 Protection of fire-fighters: Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes. 6. ACCIDENTAL RELEASE MEASURES Personal precautions: Environmental precautions: Clean-up procedures: Refer to section 8 of SDS for personal protection details. Turn leaking containers leak-side up to prevent the escape of liquid. Do not discharge into drains or rivers. Contain the spillage using bunding. Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for disposal by an appropriate method. 7. HANDLING AND STORAGE Handling requirements: Storage conditions: Suitable packaging: Avoid direct contact with the substance. Store in cool, well ventilated area. Keep container tightly closed. Must only be kept in original packaging. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering measures: Respiratory protection: Hand protection: Eye protection: Skin protection: Ensure there is sufficient ventilation of the area. Respiratory protection not required. Protective gloves. Safety glasses. Ensure eye bath is to hand. Protective clothing. 9. PHYSICAL AND CHEMICAL PROPERTIES State: Liquid Colour: Yellow Odour: Characteristic odour Solubility in water: Insoluble Flash point C: > 100 Relative density: 1.13 10. STABILITY AND REACTIVITY Stability: Conditions to avoid: Materials to avoid: Haz. decomp. products: Stable under normal conditions. Heat. Strong oxidising agents. In combustion emits toxic fumes. 11. TOXICOLOGICAL INFORMATION Hazardous ingredients: 2,4,6-TRIS(DIMETHYLAMINOMETHYL)PHENOL ORL RAT LD50 1200 mg/kg SKN RAT LD50 1280 mg/kg
Issued: 06/05/08 5 MINUTE EPOXY HARDENER Page 3 Routes of exposure: Refer to section 4 of SDS for routes of exposure and corresponding symptoms. 12. ECOLOGICAL INFORMATION 13. DISPOSAL CONSIDERATIONS Disposal of packaging: NB: Dispose of in a regulated landfill site or other method for hazardous or toxic wastes. The user's attention is drawn to the possible existence of regional or national regulations regarding disposal. 14. TRANSPORT INFORMATION ADR / RID UN no: 3334 ADR Class: 9 Classification code: M11 Shipping name: AVIATION REGULATED LIQUID, N.O.S. (2,4,6-TRIS(DIMETHYLAMINOMETHYL)PHENOL) IMDG / IMO UN no: 3334 Class: 9 Marine pollutant: NO IATA / ICAO UN no: 3334 Class: 9 Packing instructions: 906 15. REGULATORY INFORMATION Hazard symbols: Note: No significant hazard. The regulatory information given above only indicates the principal regulations specifically applicable to the product described in the safety data sheet. The user's attention is drawn to the possible existence of additional provisions which complete these regulations. Refer to all applicable national, international and local regulations or provisions. 16. OTHER INFORMATION Risk phrases used in s.3: R22: Harmful if swallowed. R36/38: Irritating to eyes and skin.
Issued: 06/05/08 5 MINUTE EPOXY HARDENER Page 4 Legal disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any damage resulting from handling or from contact with the above product. [final page]