ISO/IEC 17025:2017. Accreditation No. Name and Address: Organization Name Address

Similar documents
MET-101 Introduction to Metrology

THE USE OF Z FACTORS IN GRAVIMETRIC VOLUME MEASUREMENTS

Performance Overview calibration Laboratory EP Instruments Messtechnik und Kalibrierung GmbH

LEAP CO 2 Laboratory CO 2 mixtures test facility

CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF PRESSURE METROLOGY

Chapter 1: Basic Concepts of Pneumatics

FPG8601 Force Balanced Piston Gauge

Establishing Primary Gas Pressure Standard facility (0.140 to 70) bar Gas Piston Gauge at FCRI and its applications

Pressure Measurements

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

Pressure Measurement

NMISA NEW GAS FLOW CALIBRATION FACILITY. Deona Jonker 7 October 2013

GMC-I Service GmbH Calibration Center

SIM MWG7 Mass and Related Quantities. Report to CCM

Unique mounting features for Thermal Mass Flow Meters. By Martin Raab in cooperation with CaTeC b.v.

THERMODYNAMICS, HEAT AND MASS TRANSFER TUTORIAL NO: 1 (SPECIFIC VOLUME, PRESSURE AND TEMPERATURE)

THE PRESSURE SIGNAL CALIBRATION TECHNOLOGY OF THE COMPREHENSIVE TEST

SPH 4C Unit 4 Hydraulics and Pneumatic Systems

Operational experiences with the EuroLoop Liquid Hydrocarbon Flow Facility

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

PC10 Piezoresistive Silicon Pressure Sensor

mass of container full of air = g mass of container with extra air = g volume of air released = cm 3

and its weight (in newtons) when located on a planet with an acceleration of gravity equal to 4.0 ft/s 2.

All-Russia D.I.Mendeleyev Scientific and Research Institute for Metrology (VNIIM)

Pressure calibration. 20

Selecting the right pressure sensor for your application

K V A L I F I K. Our accreditation number: NAH /2015. Valid to:

Automatic Isokinetic Sampler. ST5 Evo

H&D Fitzgerald Pressure Pyknometry System Mark 5

Coriolis Mass Flow Meter

Organisation Internationale de Métrologie Légale

LECTURE 20 FLOW CONTROL VAVLES SELF EVALUATION QUESTIONS AND ANSWERS

Properties of Fluids SPH4C

Slide 1 / What is the density of an aluminum block with a mass of 4050 kg and volume of 1.5 m 3?

SEMEM3-78 Testing and calibrating instrumentation and control equipment and circuits

Truck-mounted Mass Flow Metering for LPG Delivery

Chapter 9 Fluids and Buoyant Force

Vortex Flow Meter Wafer or Flange Connection. - Steam - Liquid - Gas

Chapter Pipette service & maintenance. Pipette specifications according to ISO Repair in the lab or return for service?

Automatic Isokinetic Sampler. ST5 Evo

Measurement And Control Appreciation

Gas flow calibrations performed at the National Metrology Institute of South Africa (NMISA)

ISO INTERNATIONAL STANDARD. Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor

Gas Flow Calibration Basics

JCSS accredited laboratory Endress+Hauser Japan

TEK-SUB 4800B. Submersible Level Transmitter. Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys LEVEL

AN ANALYSIS ON HIGH PRESSURE DYNAMIC CALIBRATORS USED IN THE DEFENSE AREAS

Differential Pressure Transmiter

BS12N Piezoresistive OEM Pressure Sensor

Coriolis Mass Flow Meter

Gas Measurement Fundamentals Certification. Curriculum

CONTENTS 1. INTRODUCTION DESCRIPTION OF TEST SAMPLE TEST RIG GENERAL ARRANGEMENT TEST SEQUENCE...7

PRESSURE TRANSDUCERS WITH UNIFIED (4-20) ma OR (10-50) ma OUTPUT SIGNAL

Quiz #1 Thermodynamics Spring, 2018 Closed Book, Open Appendices, Closed Notes, CLOSED CALCULATORS

PG7000 high line differential mode for defining differential pressure at line pressures above atmospheric pressure (PG7000 V2.

Slide 5 / What is the difference between the pressure on the bottom of a pool and the pressure on the water surface? A ρgh B ρg/h C ρ/gh D gh/ρ

Experimental investigation of the check valve behaviour when the flow is reversing

Pressure transmitters EMP 2

ISO INTERNATIONAL STANDARD. Hydraulic fluid power Filter elements Determination of resistance to flow fatigue using high viscosity fluid

NMISA New Gas Flow Calibration Facility

Hydraulic pressure balance Model CPB5800

Technical Datasheet ZHA Series Gear Flow Meters Aluminum Version with ball bearing for lubricating media

POLISH MARITIME RESEARCH 4(80) 2013 Vol 20; pp /pomr

FROTH: Fundamentals and Reliability of Offshore Structure Hydrodynamics EPSRC

Digital pressure gauge Model CPG500

1. The principle of fluid pressure that is used in hydraulic brakes or lifts is that:

ProSoft Technology, Inc. Summary Regarding Alberta Energy and Utilities Board Directive 017 of May 2007

Accredited Laboratory

Successful completion of the course leads to the award of the Technical Training Solutions Certificate of Competence 510: Instrumentation.

ASDX Series Silicon Pressure Sensors

Digital Pressure Gauge Main features: Data Sheet: BIT02B.417.R6.EN COVER on request

Rotary Viscometers Rotary viscosimeters ST-2020

BS12 Piezoresistive OEM Pressure Sensor

Product Specification

The HumiPyc - Model 1 - Gas Pycnometer; Density, Moisture, Permeation Analyzer; RH sensor Calibrator

Scanning Laser Vibrometry Assessment of Sports Equipment

2600T Series Pressure Transmitter Models 264DC Differential and 264HC Gage Level Transmitters. Kent-Taylor

Old-Exam.Questions-Ch-14 T072 T071

ISO Vacuum gauges Calibration by direct comparison with a reference gauge

OPTIBAR P 1010 C Technical Datasheet

HPFM GEN3 - High Pressure Flow Meter

Density and Specific Gravity

INVITATION FOR QUOTATION. TEQIP-III/2019/mmug/Shopping/51

Lab 3 Introduction to Quantitative Analysis: Pumps and Measurements of Flow

The HumiPyc ( Model 2) - Gas Pycnometer; Density, Moisture, Permeation Analyzer; Filter Integrity Tester; RH sensor Calibrator

Test pumps. Pressure sources. Good reasons for proper and reliable calibration

Instrumentation & Data Acquisition Systems

Air Cylinders Drive System Full Stroke Time & Stroke End Velocity

HYDRAULICS. H89.8D - Hydraulic Bench

7250 Sys. Ruska Multi-Range Pressure Calibration System. GE Sensing & Inspection Technologies. Features. Applications

Certificate of Accreditation

Pneumatic dead-weight tester Model CPB3500

Pressure Calibration Solutions

CALIBRATION SERVICES HUMIDITY DEW POINT AIR VELOCITY MASS FLOW TEMPERATURE CO 2 PRESSURE. (+34)

UKAS calibration laboratory 8809 Temperature, pressure and electrical signals calibration guide

KNOWN: Mass, pressure, temperature, and specific volume of water vapor.

Capillary Flow Porometer/Frazier/C-522 CFP-1100AEX-F-C522

Compiled by: B Beard. Approved by: SH Carstens. Description of requirements and procedures for compact provers to be used as verification standards.

P9000 DESCRIPTION. For parts requiring RoHS compliance, please contact factory. P February /6

Transcription:

Name and Address: Organization Name Address Phone Fax E-Mail Magnus Engineering and Maintenance Ltd. Faran 4,, Yavne 8122503, Israel +972-8-6599000 +972-8-942-0858 Lab@magnus-eng.com Date of issue 17.2.2019 Version No. 4 Page No. 1 of: 6

Calibration - Large Volume Volumetric Instruments 1 A P Liquid Mass. Liquid Mass s כיול כיול מכשירים וו ל ומ ט ר יים נפחים גדולים מסת נוזלים. מדי מסת נוזל ] 1 kg to 1600 kg] 0.04 % O.R. Internal Calibration Procedure 9 Internal Procedure 2 A P Liquid Mass. Weighing Tanks, Liquid Mass s מסת נוזלים. מיכלים שקולים, מדי מסת נוזל ]1600 kg to 195000 kg] At flow rate of 0.12 kg/min to 1300 kg/min 0.13 % O.R. CI-06 3 A T Liquid Mass. Weighing Tanks, Liquid Mass s מסת נוזלים. מיכלים שקולים, מדי מסת נוזל [1 kg to 195000 kg] At flow rate of 0.12 kg/min to 1300 kg/min 0.13 % O.R. CI-06 4 A P;T Liquid Volume. Liquid Tanks, Liquid Volume s נפח נוזלים. מיכלים למדידת נפח נוזלים, מדי נפח נוזלים [1 L to 195000 L] At flow rate of 0.12 L/min to 1300 L/min 0.14 % O.R. CI-06 Coriolis flow and density meter. of s: A- Fixed, C- Flexible scope in analytical tests : of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's Date of issue 17.2.2019 Version No. 4 Page No. 2 of: 6

Calibration - Physical Quantities - Liquid and Air Flow 5 A P Liquid Mass Flow rate, ספיקת נוזלים מסתית, [3.6 g/min to 30 g/min] 0.09 % OR 6 A P Liquid Mass Flow rate מד ספיקה מסתית לנוזלים [0.03 kg/min to 60 kg/min] 0.03 % OR CI-02, CI-05 7 A P )60 kg/min to 300 kg/min] 0.04 % OR 8 A P )300 kg/min to 1300 kg/min] 0.05 % OR 9 A P;T Liquid Mass Flow rate, ספיקת נוזלים מסתית, (3.6 g/min to 30 g/min) 0.40 % OR 10 A P;T Liquid Mass Flow rate מד ספיקה מסתית לנוזלים (30 g/min to 120 g/min) 0.14 % OR CI-03, CI-04 11 A P;T [0.12 kg/min to 1300 kg/min] 0.11 % OR 12 A P Liquid Volume Flow rate, ספיקת נוזלים נפחית, [3.6 ml/min to 30mL/min] 0.10 % OR 13 Liquid Volume Flow rate מד ספיקה נפחית לנוזלים [0.03 L/min to 60 L/min] 0.04 % OR CI-02, CI-05 14 A P (60 L/min to 300 L/min] 0.05 % OR 15 A P (300 L/min to 1300 L/min] 0.06 % OR 16 A P;T Liquid Volume Flow rate, ספיקת נוזלים נפחית, (3.6 ml/min to 30 ml/min) 0.40 % OR 17 A P;T Liquid Volume Flow rate מד ספיקה נפחית לנוזלים (30 ml/min to 120 ml/min] 0.15 % OR CI-03, CI-04 18 A P;T [0.12 L/min to 1300 L/min] 0.12 % OR 19 A P;T Gas Mass Flow rate, ספיקת גזים מסתית, (6 mg/min to 12 mg/min) 0.70 % OR 20 A P;T Gas Mass Flow rate מד ספיקת גזים מסתי (0.06 g/min to 3.6 g/min) 0.65 % OR CI-07 21 A P;T (3.6 g/min to 960 g/min) 0.60 % OR 22 A T (3.6 g/min to 900 kg/min) 0.60 % OR 23 A P;T Gas Volume Flow rate, Gas Volume Flow rate of s: A- Fixed, C- Flexible scope in analytical tests : of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's כיול - גדלים פיזיקליים - זרימה, נוזל ואויר ספיקת גזים נפחית, מד ספיקת גזים נפחי (5 to 5000) ml/min 0.50 % OR CI-07 weighing weighing and density calibration Flow rates values may be converted to other units by taking into account relevant reference conditions. Piston prover Flow rates values may be converted to other units by taking into account relevant reference conditions. Date of issue 17.2.2019 Version No. 4 Page No. 3 of: 6

Calibration - Physical Quantities - Pressure 24 A P;T Pressure, Hydraulic, Gauge Pressure meters and transmitters כיול - גדלים פיזיקליים - לחץ לחץ, לחץ יחסי הידראולי מדי לחץ משדרי לחץ [0.7 MPa to 35 MPa] (35 MPa to 70 MPa] 1.2 Pa/kPa 1.4 Pa/kPa CI-11 EURAMET cg-17 OIML R 101 25 A P;T Pressure, [5 kpa to 2 MPa] 0.7 Pa/kPa לחץ, Pneumatic, Absolute לחץ אבסולוטי פניאומטי CI-11 A P;T Pressure meters and מדי לחץ משדרי לחץ 26 (2MPa to 10 MPa] 1.1 Pa/kPa transmitters EURAMET cg-17 OIML R 101 27 A P;T Pressure, [-95 kpa to -20 kpa) 0.7 Pa/kPa לחץ, Pneumatic, Gauge Pressure לחץ יחסי פניאומטי CI-11 28 A P;T meters and transmitters [-20 kpa to 20 kpa] 15 Pa מדי לחץ משדרי לחץ 29 A P;T (20 kpa to 2 MPa] 0.7 Pa/kPa EURAMET cg-17 30 A P;T (2 MPa to 10 MPa] 1.1 Pa/kPa 31 A P;T (10 MPa to 15 MPa] 1.2 Pa/kPa OIML R 101 Pressure Calibrator Druck Pressure Calibrator Druck Pressure Calibrator Druck of s: A- Fixed, C- Flexible scope in analytical tests : of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's Date of issue 17.2.2019 Version No. 4 Page No. 4 of: 6

Calibration - Physical Quantities - Temperature 32 A P;T Temperature, Temperature indicators for resistance sensors 33 A P;T Temperature, Temperature resistance sensors כיול - גדלים פיזיקליים - טמפרטורה טמפרטורה, מדידי טמפרטורה לגששי התנגדות טמפרטורה, מדי טמפרטורה התנגדות [-200 C to 650 C] 0.25 C CI-22 ASTM E 1137/1137M [-30 C to 120 C] 0.11 C CI-21 ASTM E 1137/1137M Calibration by electrical simulation Comparison to PRT in liquid bath of s: A- Fixed, C- Flexible scope in analytical tests : of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's Date of issue 17.2.2019 Version No. 4 Page No. 5 of: 6

Calibration - Mechanical Quantities - Accelerometers 34 A P Acceleration Piezoelectric accelerometer 35 A P Acceleration Piezoresistive accelerometer 36 A P Vibration Transducer Velocity Transducer m/s²] [5 m/s² to 200 מד תאוצה פייזואלקטרי m/s²] [5 m/s² to 200 מד תאוצה פייזורזיסטיבי [5 Hz to 10 Hz] (10 Hz to 3.5 khz] [5Hz to 10 Hz] (10 Hz to 3.5 khz] 1.6% O.R. 1.2 % O.R. 1.6 % O.R. 1.2 % O.R. CI-10 ISO 16063-21 CI-10 ISO 16063-21 כיול - גדלים מכניים מדי תאוצה m/s²] [5 m/s² to 200 מד מהירות [45 Hz to 3.5 khz] 1.2% O.R. CI-10 ISO 16063-21 Back to back calibration versus standard accelerometer DUT Sensitivity range 0.1 pc/g to 999 pc/g g = 9.80655 m/s2 DUT mass up to 200 g OR of reading Back to back calibration versus standard accelerometer DUT Sensitivity range 0.1 mv/g to 999 mv/g g = 9.80655 m/s2 DUT mass up to 200 g OR of reading Back to back calibration versus standard accelerometer DUT Sensitivity range 0.1 mv/ips to 999 mv/ips g = 9.80655 m/s2 DUT mass up to 200 g OR of reading of s: A- Fixed, C- Flexible scope in analytical tests : of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's Date of issue 17.2.2019 Version No. 4 Page No. 6 of: 6