MATERIAL SAFETY DATA SHEET - REPORT NO FOR A PRODUCT CALLED "RUST-BUSTER" DISTRIBUTED BY NORVEY, INC.

Similar documents
MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Version /28/2006

Material Safety Data Sheet Product No Cresyl Violet Acetate, Certified. Issue Date ( ) Review Date ( )

Version /30/2006

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Version /20/2006

Version /28/2006

1. Identification of the preparation and company. 2. Hazard identification of the product. Warning

Material Safety Data Sheet

OSHA regulated. NE NE No No No. NE NE No No No

GLENIUM 3000 (FORMERLY: RHEOBUILD 3000FC; PS1140 ADMIXTURE)

Bardahl XTF Syn Multi-Functional ATF

Material Safety Data Sheet

3. COMPOSITION / INFORMATION ON INGREDIENTS

MATERIAL SAFETY DATA SHEET Date Revised: 7/18/2013 Page: 1 Mold Release MSDS Number: SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFTEY DATA SHEET

Issue Date: 16-Feb-2012 Revision Date: 24-Feb-2015 Version 2 1. IDENTIFICATION. United 894 ZYME-OUT. For industrial and institutional use only.

Material Safety Data Sheet Product No Colloidal Silica Suspension, 0.06µm

Version /29/2006

TESCO Products Inc. Crystal Seal II

SAFETY DATA SHEET SECTION 1 PRODUCT AND COMPANY INFORMATION SECTION 2 COMPOSITION INFORMATION ON INGREDIENTS SECTION 3 HAZARDS IDENTIFICATION

Safety Data Sheet Product No Tissue-Tack Adhesive Issue Date ( ) Review Date ( )

MATERIAL SAFETY DATA SHEET C-MUL SUN DRILLING PRODUCTS CORP.

HOC Industries, Inc. Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Air Tool Lubricant MSDS. Air Tool Lubricant. (800) (Poison Control USA) 24 Hours (800) (CHEMTREC) 24 Hours. Not Applicable - Mixture

Sodium Lauroyl Sarcosinate

MATERIAL SAFTEY DATA SHEET

Material Safety Data Sheet Remel Prepared Culture Media Containing Vancomycin. Section 1 - Chemical Product and Company Identification

Version /08/2003

Material Safety Data Sheet RUST VETO 342

MATERIAL SAFTEY DATA SHEET

Revision Date: March 12, 2014 Page 1 of 5 SECTION 1: IDENTIFICATION SECTION 2: HAZARDS IDENTIFICATION

Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR

AUTOMOTIVE INTERNATIONAL

MATERIAL SAFETY DATA SHEET Certis USA 9145 Guilford Road, Suite 175 Columbia, Maryland 21046

Version /30/2006

MATERIAL SAFETY DATA SHEET PAGE 1

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H20E, Part A BILLERICA, MA 01821

GHS Classification: 1. PRODUCT AND COMPANY IDENTIFICATION. Product Identity: Crude Glycerin Chemical Name: 1,2,3-propanetriol

Safety Data Sheet. BOSS 139 Hi-Temp Mortar. Section 1. Identification. Section 2. Hazards Identification. Synonyms Manufacturer Stock Numbers

MATERIAL SAFETY DATA SHEET PAGE 1

SAFETY DATA SHEET FOR FALK GMAX 6000

MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON INGREDIENTS

BACHARACH, INC. MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. (Glycerine) Glycerine DATE PREPARED: 6/18/2015. Section 1. Product and Company Identification. Product Name CAS Number

Section 3 Physical Data

Material Safety Data Sheet

Version /27/2006

Activated Carbon %

MATERIAL SAFETY DATA SHEET 2. COMPOSITION/INFORMATION ON INGREDIENTS

SAFETY DATA SHEET. Section 2: Hazard Identification Classification of the chemical in accordance with paragraph (d) of :

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Product No PELCO CryO-Z-T Issue Date ( ) Review Date ( )

Material Safety Data Sheet

24 hr. Emergency Contact (CHEMTREC) US Tel: Int l. Tel CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET A Colorant

Gulf Compressor Synthetic DE Lubricant

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR

Rust Check Corporation Rust Inhibitor MATERIAL SAFETY DATA SHEET

The Valvoline Company Date Prepared: 01/14/02. MSDS No: I

* HMIS CODE ratings are estimated by Epoxy Technology. II. HAZARDOUS INGREDIENTS CAS# WT % TOXICITY DATA

1. Chemical Product and Company Identification

Silver ( )* ~ ND No No No Arcosolve PM ( ) Toluene ( ) ** 200 PPM 20 PPM No 3 No ** 1000 PPM

MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON INGREDIENTS

Mearlin Magnapearl 2000

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR

Cuprous Oxide Safety Data Sheet

Section 1 Chemical Product and Company Information. Product Name: ATI PAO-4 Preparation Date: 11/21/00 Product Use: Filter Testing

MATERIAL SAFETY DATA SHEET Artisan Penetrating Stone Sealer & Oil Repellent SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

SAFETY DATA SHEET SECTION 1 IDENTIFICATION. MB4908 Product Line

MATERIAL SAFETY DATA SHEET

LIQUID ICE CORPORATION

Safety Data Sheet. 503 Main Street Belle Chasse, LA 70037

MATERIAL SAFETY DATA SHEET Artisan Intensive Stone Cleaner SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

PRO-LINE PL-11 PHTHALOCYANINE BLUE

SAFETY DATA SHEET. Orang-Sol 300. MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS Detco Industries, Inc.

Material Safety Data Sheet

1. Chemical Product and Company Identification. 2. Hazardous Ingredients. 3. Hazards Identification

Version /28/2006

Thoroseal Waterproofing Paint

Tetrasodium Pyrophosphate Safety Data Sheet

Issue Date: 13-Dec-2012 Revision Date: 10-APR-2015 Version 2 1. IDENTIFICATION. United 432 PHASER GLASS BLAST. Concentrated glass cleaner.

MATERIAL SAFETY DATA SHEET MSDS DATE: 9/3/ Surfactant SUPERSEDES: None

Emergency Overview HARMFUL OR FATAL IF SWALLOWED. COMBUSTIBLE. EYE AND SKIN IRRITANT.

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

1. Product And Company Identification

SAFETY DATA SHEET. Lemon Oil Furniture Polish. 1. Product and Company Identification. 2. Hazards Identification

MATERIAL SAFETY DATA SHEET

Transcription:

MATERIAL SAFETY DATA SHEET - REPORT NO. 005565 FOR A PRODUCT CALLED "RUST-BUSTER" DISTRIBUTED BY NORVEY, INC. REPORT NUMBER: 005565, PAGE 1 COMPANY ADDRESS: NORVEY, INC. 300 SOUTH STANDARD AVE. SANTA ANA, CA 92701 TEL: (714) 973-0330 FAX: (714) 973-2383 E-MAIL: hbrody9001@aol.com IF OUR ASSISTANCE IS REQUIRED DUE TO ANY KIND OF AN EMERGENCY WHICH MAY OCCUR DURING THE DAY AND/OR DURING THE NIGHT (INCLUDING WEEKENDS AND/OR HOLIDAYS), PLEASE CALL ONE OR MORE OF THE FOLLOWING TELEPHONE NUMBERS: DAYS: (714) 973-0330, DURING REGULAR BUSINESS HOURS, MONDAY-FRIDAY HOLIDAYS AND/OR WEEKENDS, DAY AND/OR NIGHT, AT ONE OR MORE OF THE FOLLOWING TELEPHONE NUMBERS: (714) 557-4161, (714) 641-6883, (714) 283-5388, (714) 856-9087 (714) 856-8797 (714) 925-O853, OR (714) 925-0873 TO REACH US VIA FAX, CALL (714) 973-2383 AT ANY TIME DAY OR NIGHT, DURING THE WORK WEEK, WEEKENDS OR HOLIDAYS. FOR SALES AND TECHNICAL ASSISTANCE: PLEASE CALL THE NORVEY, INC. HEADQUARTERS TELEPHONE NUMBER, (714) 973-0330 FROM 9:30 A.M. UNTIL 4:00 P.M.MONDAY -FRIDAY, OR USE FAX NUMBER (714) 973-23.M. 1. PRODUCT IDENTIFICATION The trade name of this product is "RUST-BUSTER" It can be described as a paraffinic/napthenic solvent and/or an aliphatic solvent, that is primarily a petroleum distillate. The CAS number for this product is: 64742-47-8 distillate (petroleum), hydrotreated light.

REPORT NUMBER: 005565, PAGE 2 NOTE: This product should only be used as a penetrant for loosening rusted parts. If it is used for any other purpose, please test the planned use in a safe manner, in order to avoid direct or indirect damage to any person or equipment. Please also follow any and all of the safety precautions listed on this MSDS. NORVEY, INC and/or any of its affiliated corporate and other entities, its distributors etc., all assume no responsibility for the use of this product other than for those uses described in this MSDS, when accompanied by all of the procedures herein described and also explained. The safety and use information described on this MSDS sheet should be used as the basis for descriptive literature and also all directions or instructions covered on any and all product literature. 2. COMPONENTS AND HAZARD CLASSIFICATION This product is described by OSHA as a combustible, and it is also described by SARA 311/312, as a "fire hazard." It contains no chemicals in any quantity that would subject it to reporting procedures as mandated by SARA 302 or SARA 313. 3. PHYSICAL DATA BOILING POINT (DEGREES F.): 368-405 SPECIFIC GRAVITY (H2O = 1): 0.809 @ 60 DEGREES F. VAPOR PRESSURE (mm Hg.): 1.1 @ 100 DEGREES F. MELTING POINT: <-103 DEGREES F. SOLUBILITY IN WATER: NEGLIGIBLE VAPOR DENSITY: 5.2 APPEARANCE AND ODOR: 4. FIRE AND EXPLOSION DATA WATER WHITE, OILY LIQUID WITH HYDROCARBON ODOR THE FIRE/EXPLOSION DATA OF THIS PRODUCT IS LISTED AS FOLLOWS: FLASH POINT (TEST METHOD): 146 DEGREES F. AUTO-IGNITION TEMPERATURE: NOT AVAILABLE. FLAMMABLE LIMITS IN AIR: BY % VOLUME, APPROXIMATELY 0.7 FOR LOWER LIMIT AND 7 FOR UPPER LIMIT. EXTINGUISHING MEDIA: USE WATER SPRAY, DRY CHEMICAL OR

ALCOHOL COMPATIBLE FOAM REPORT NUMBER: 005565, PAGE 3 NOTE: Special fire fighting procedures should be used to cool exposed equipment with water spray, until long after fire is out. Self-contained breathing apparatus (SCBA) and structural fire fighter's protective clothing, will provide limited protection. In regard to unusual fire and explosion hazards, this fluid is described as a NFPA class IIIa combustible fluid. 5. HEALTH HAZARD INFORMATION FIRST AID: EYES: Immediately flush eyes with plenty of water for at least 15 minutes. If irritation persists, seek immediate medical attention. SKIN: Flush skin with plenty of water. Remove contaminated clothing. Call a physician if irritation persists. Wash clothing before reuse. INHALATION: Remove to patient fresh air. If not breathing, give artificial respiration and seek immediate medical attention. Oxygen should be administered only by trained personnel. INGESTION: If swallowed, call a physician immediately. Never induce vomiting, unless instructed to do so by a physician. Avoid asperation of vomitus into lungs, because even small quantities can result in asperation pneumonitus. NATURE OF HAZARD: EYES: Liquid contact of this fluid to eyes, may cause irritation. SKIN: Repeated or prolonged contact with liquid may cause irritation, reddening and dermatitis. INHALATION: High vapor concentrations of this fluid, may cause headaches, stupor, irritation of throat/eyes and adverse kidney effects. Aspiration may cause critical pneumonia, or death. INGESTION: This product has a low order of toxicity when ingested, but it does cause irritation of the stomach and intestines, possibly resulting in nausea and vomiting. EXPOSURE LIMITS: Norvey, Inc. recommended PEL: 100 ppm, 525 mg/m3 for 8-hour TWA (exposure limits for petroleum distillate Stoddard solvent)

REPORT NUMBER: 005565, PAGE 4 TOXICITY DATA: This product has not been specifically tested. Data from a similar product is given below: EYE CONTACT: Primary Eye Irritation Index (Rabbit): Maximum average score - 3.0 after one hour (max. 110). SKIN CONTACT: Primary Skin Irritation Index (Rabbit): 1.2 of 8 Acute Dermal Toxicity (Rabbit): LD50 2.0-4.0 gm/kg for a similar product. INHALATION: No toxicity observed in rats exposed to this product for four hours, to 2 mg/l. INGESTION: Acute Oral Toxicity (Rat): LD50 >5.0 gm/kg. SPECIAL PRECAUTIONS: May cause skin irritation. 6. REACTIVITY DATA CONDITIONS CONTRIBUTING TO INSTABILITY: High temperatures INCOMPATIBILITY: May react with strong oxidizers HAZARDOUS DECOMPOSITION PRODUCTS: None CONDITIONS CONTRIBUTING TO HAZARDOUS POLYMERIZATION: None 7. SPILL OR LEAK PROCEDURES TO ABSORB A SPILL Absorb a spill with inert material, then place in chemical waste container. For large spills, contain and pick up fluid just as soon as possible. Dispose fluid according to local, state and federal regulations. In Canada, follow federal guidelines and also follow provincial guidelines. WASTE CLASSIFICATION: If discarded in its purchased form, this product is not designated as an RCRA hazardous waste. Current evaluation of the product may be required by the user at the time of disposal, since the utilization of the product, as well as the

transformations and mixtures that have taken place during use, may change the above mentioned classification. REPORT NUMBER: 005565, PAGE 5 8. SPECIAL PROTECTION INFORMATION VENTILATION RECOMMENDATIONS: Air contaminant levels should be controlled below the PEL or TLV for this product (see Section 5, under Health Hazard Information). Mechanical ventilation may be needed if this product is used in an enclosed place. SPECIFIC PERSONAL PROTECTIVE EQUIPMENT: EYES: When contact with liquid may occur, please use a face shield and chemical goggles. Otherwise use safety glasses. SKIN: Chemical gloves should be worn in order to prevent repeated contact with skin. If the potential for significant exposure to skin, eyes and lungs concerning this liquid exists, use full protective clothing in addition to chemical boots. RESPIRATORY PROTECTION: Use NIOSH-approved organic vapor air purifying respirator, self-contained breathing apparatus and/or air supplied respirator, depending upon the concentration of product present. 9. SHIPPING, TRANSFER AND STORAGE SHIPPING INFORMATION: For quantities greater than 119 gallons, please use the following designation: DOT PROPER SHIPPING NAME: Petroleum distillates, n.o.s. DOT HAZARD CLASS: Combustible liquid DOT IDENTIFICATION NO.: UN 1268 PACKING GROUP: III For quantities less than, or equal to, 119 gallons, not regulated This product is not a dangerous product as defined by IATA for air transportation or IMO for water transport. TRANSPORTATION AND STORAGE: ELECTROSTATIC ACCUMULATION HAZARD: None expected STORAGE/TRANSPORT TEMPERATURE: Ambient STORAGE/TRANSPORT PRESSURE: Ambient

VISCOSITY: 1.8 cst @ 70 degrees F. 1.4 cst @ 100 degrees F. REPORT NUMBER: 005565, PAGE 6 10. REGULATORY INFORMATION This material contains the following chemicals subject to the reporting requirements of SARA 313 and 40 CFR 372: --NONE-- WARNING: This material contains the following chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm, and are subject to the requirements of California Proposition 65 (CA Health/Safety Code Section 25249.5):--None Known-- This material has not been identified as a carcinogen by NTP, IARC, or OSHA. For carcinogenicity information on individual components, see TOXICITY DATA. EPA (CERCLA) Reportable Quantity: --None-- Legend for data listed below: 0, 1 (moderate), 2 (high), 3 (very high) 4 (extreme) Degree of Hazard NFPA HMIS RATINGS Health 1 1 Fire 2 2 Reactivity 0 0 Specific Hazards None Personal Protection Index a* OTHER REGULATIONS: All components of this formulations are listed in the Domestic Substances List (DSL., Canadian) and in the Toxic Substance Control Act Inventory (TSCA). This product contains no known carcinogens. WHMIS (Canada) DSCL (EEC) Japan/Australia Listed as a B-3 substance Listed under EINECS (Europe) Listed under MITI (Japan), AICS (Australia) EPA (CERCLA) (40 CFR 302.40) Not listed, no reportable quantities NTP/IARC/OSHA EPCRA Has not been identified as a carcinogen none

* Use protective glasses when eyes are exposed to spray or liquid REPORT NUMBER: 62, PAGE 7 NOTICE: PLEASE MODIFY ANY AND ALL GRAPHICS, TYPOGRAPHY AND WORDING ON ALL EXISTING LITERATURE RELATED TO THIS COMMERCIAL PRODUCT, WHICH IS SOLD UNDER THE NAMES OF "RUST-BUSTER" SO THAT THE EXISTING LITERATURE IS CONSTANTLY MADE TO CONFORM TO THE SAFETY DATA AND HANDLING INFORMATION CONTAINED HEREIN. NORVEY, INC. EXPRESSLY DISCLAIMS ALL ORAL, WRITTEN OR IMPLIED WARRANTIES, REGARDLESS OF WHETHER SUCH WARRANTIES ARE DIRECTLY OR INDIRECTLY IMPLIED, CONCERNING THE MARKETABILITY AND/OR FITNESS OF THIS PRODUCT FOR A PARTICULAR PURPOSE, OTHER THAN FOR THE USES WHICH ARE DESCRIBED AND HEREIN APPROVED IN THIS MATERIAL SAFETY DATA SHEET. ALL INFORMATION APPEARING HEREIN IS BASED UPON DATA OBTAINED FROM THE PRIME INGREDIENT MANUFACTURERS, AND/OR FROM DATA SECURED FROM RECOGNIZED TECHNICAL AND LABORATORY SOURCES. WHILE ALL OF THE INFORMATION CONTAINED HEREIN IS BELIEVED TO BE ENTIRELY ACCURATE, NORVEY, INC. MAKES NO REPRESENTATIONS AS TO ITS TOTAL ACCURACY OR SUFFICIENCY. IN ADDITION, CONDITIONS OF USE ARE BEYOND THE CONTROL OF NORVEY, INC. THEREFORE, ANY AND ALL USERS ARE RESPONSIBLE FOR VERIFYING THIS DATA IN RESPECT TO THEIR OWN OPERATING CONDITIONS AND/OR USES, IN ORDER TO DETERMINE WHETHER THIS PRODUCT IS SUITABLE FOR THE PARTICULAR PURPOSES AND USES INTENDED. IN ADDITION, ANY AND ALL USERS MUST ASSUME ALL RISKS FOR THE UTILIZATION, HANDLING AND DISPOSAL OF THIS PRODUCT, WHEN IT IS UNDER THEIR CONTROL AND/OR IN THEIR POSSESSION. USERS MUST ALSO ASSUME ANY AND ALL RISKS RELATED TO THE PROPER USE, HANDLING AND DISPOSAL OF THIS PRODUCT. THIS INFORMATION RELATES ONLY TO THE PRODUCT, HEREIN DESIGNATED AS "RUST-BUSTER" IT DOES NOT RELATE TO THE USE OF THIS PRODUCT IN COMBINATION WITH ANY OTHER MATERIAL, OR WHEN USED AS A PART OF ANY OTHER PROCESS.