PATENTED TECHNOLOGY A HIGH PERFORMANCE SURFBOARD BLANK info@incideblanks.com INCIDEblanks.com 310 225 6774
T H E B R A I N SURFBOARD BLANK TECHNOLOGY Until now, the structure of a surfboard has been rooted in the wooden stringer. As a board is shaped, the stringer is thinned down with each pass of the planer. THIS ALTERS THE STRUCTURE OF THE BOARD. A thick board has more structure, making the board stiffer in turns. A thinner board has less structure making the board more flexible. Instead of relying on a wooden stringer that is altered as the board is shaped, INCIDE sandwiches the structure inside of the foam blank via 'THE BRAIN'. 1 - EPS foam 1 - EPS foam ( CROSS-SECTION OF AN INCIDE BLANK ) This carbon fiber part is pre-tuned prior to shaping allowing the board to be shaped without altering the flex or integrity of the structure. With 'THE BRAIN', we are improving the classic wooden stringer, now providing board builders the ability to approach their shaping in a new light, opening new doors for design and processes in which boards are made.
A R B O N SURFBOARD BLANK TECHNOLOGY 5 x STRONGER than 2 x AS STIFF 1/3 THE WEIGHT This amazing weight to strength ration makes carbon fiber one of the most high performance materials out there. With INCIDE s blank technology, the performance and structure of the surfboard is fixed in carbon fiber. Up until now people have only used carbon fiber in the external shape of the board. This does not work for a number of reasons, mainly cost and the inability to tune your shape making it simply an expensive glass job. Instead we use carbon to actually make a better board by not only extending the performance life of your board, but increasing the ability to FINE TUNE THE FLEX.
FLEX SURFBOARD BLANK TECHNOLOGY Flex is best decribed as the way a board bends, then recoils as it comes back to static. The faster the recoil, the more lively the board feels. Feeling this response is what gives that magic board feeling. The key to INCIDE's blanks is that we have the ability to control this flex independent from the design. PUNKER PAT info@incideblanks.com INCIDEblanks.com 310 225 6774
SHAPE AT WILL SURFBOARD BLANK TECHNOLOGY WILL I PLANE INTO THE CARBON BRAIN? Unlikely - the brain is suspended in a spot that is untouched by the Shaper 99% of the time. WELL - WHAT IF I DO HIT IT? Not a problem, as strong and durable as carbon is - it can be cut with normal household scissors your planer will win and live to shape another rail. WHERE IS THE BRAIN LOCATED? The bottom of the brain is flat - locate the center seem on the rail of the blank All of the foam below that line, is brain -less - shape away // measure an inch Down from the deck - it too is brain -less. info@incideblanks.com INCIDEblanks.com 310 225 6774
INCIDE 600 DM LENGTH : 6 2.8 WIDTH : 22.2 VOLUME : 60.1 I SURFACE : 8686.2 cm2 SURFACE DEV DECK : 10054.7 cm2 BOT : 9781.6 cm2 Width Thickness 6 2.8 5 11.8 5 8.8 5.9 1.4 9.8 12.4 SCOOP 4.9 3.6 2.8 5 2.8 56.8 50.8 15.9 18.4 20.2 1.7 0.4 35.4 22.2 37.7 24.0 21.1 0.3 19.5 0.6 17.4 6.0 3.0 0.0 14.4 12.5 10.2 1.5 1.8 2.2
INCIDE 604 DM LENGTH : 6 2.8 WIDTH : 22.2 VOLUME : 59.6 I SURFACE : 8686.2 cm2 SURFACE DEV DECK : 10044.7 cm2 BOT : 9773.7 cm2 Width Thickness 6 2.4 5 11.4 5 8.4 1.4 SCOOP 3.9 2.9 2.2 5 2.4 2.8 1.3 56.4 50.4 22.2 0.8 0.4 35.2 22.12 37.4 24.0 0.3 0.6 6.0 3.0 1.5 1.8 2.2 0.0
INCIDE 602 CHUM LENGTH : 6 2.4 WIDTH : 22.2 VOLUME : 58.4 I SURFACE : 8640.5 cm2 SURFACE DEV DECK : 9969.6 cm2 BOT : 9704.3 cm2 Width Thickness 6 2.4 5 11.4 5 8.4 5.9 1.4 9.8 12.4 SCOOP 3.9 2.9 2.2 5 2.4 2.8 56.4 50.4 16 1 18.5 20.3 1.3 0.75 0.3 35.2 22.12 37.4 24.0 21.1 1.06 0.25 19.7 1.06 0.6 22.36 6.0 3.0 0.0 14.4 12.5 10.2 1.25 1.5 1.75
INCIDE 602 RC LENGTH : 6 2.8 WIDTH : 22.2 VOLUME : 59.4 I SURFACE : 8686.2 cm2 SURFACE DEV DECK : 10037.7 cm2 BOT : 9768.0 cm2 Width Thickness SCOOP 5 8.8 5.9 1.4 9.8 12.4 5 2.8 16.0 1.7 56.8 18.4 50.8 20.2 1.1 0.5 22.2 37.9 24.0 21.1 0.3 19.6 0.6 17.4 6 2.8 5 11.8 4.9 3.6 2.8 35.4 6.0 3.0 0.0 info@incideblanks.com 14.4 12.5 10.2 INCIDEblanks.com 1.4 1.7 2.0 310 225 6774
INCIDE 603 HP LENGTH : 6 2.8 WIDTH : 22.2 VOLUME : 59.5 I SURFACE : 8686.2 CM2 SURFACE DEV DECK : 10041.9 CM2 BOT : 9771.4 CM2 Width Thickness 5 8.8 5 2.8 16.0 1.7 56.8 18.4 50.8 20.2 1.1 0.4 6 2.8 5 11.8 22.2 35.4 4.9 3.6 2.8 37.4 24.0 21.1 0.3 19.6 0.6 17.4 6.0 3.0 14.4 12.5 10.2 0.0 info@incideblanks.com Scoop 5.9 1.4 9.8 12.4 INCIDEblanks.com 1.8 2.2 310 225 6774
INCIDE 608 HP LENGTH : 6 8.8 WIDTH : 22.2 VOLUME : 63.5 I SURFACE : 9342.8 cm2 SURFACE DEV DECK : 10790.1 cm2 BOT : 10501.3 cm2 Width Thickness 6 2.8 5 11.8 5 8.8 5.9 9.6 1.5 12.1 1.8 SCOOP 4.9 3.6 2.8 5 2.8 56.8 50.8 15.6 19.8 1.7 0.4 35.4 22.2 37.7 24.0 20.8 0.3 19.3 0.6 17.1 6.0 3.0 0.0 14.2 12.4 10.2 1.5 1.8 2.2
INCIDE 609 HP LENGTH : 6 8.3 WIDTH : 22.2 VOLUME : 64.9 I SURFACE : 9342.8 cm2 6 8.3 6 5.3 6 2.3 Width Thickness 1.4 1.9 SURFACE DEV DECK : 10824.3 cm2 BOT : 10528.8 cm2 SCOOP 3.9 2.9 2.2 5 8.3 2.8 1.9 5 2.3 1.1 56.3 0.5 38.0 22.12 34.4 24.0 0.4 0.8 1.3 6.0 3.0 0.0 2.0 2.3 2.8
PATENTED TECHNOLOGY P U N K E R P A T MANUFACTURED AND DISTRIBUTED by USBlanks A HIGH PERFORMANCE SURFBOARD BLANK
MADE and DISTRIBUTED by USBlanks INFO@USBLANKS.COM INCIDEBLANKS.COM 310 225 6774 SURFBOARD BLANK TECHNOLOGY With the large amount of stoke INCIDE s blanks were recieving it became clear we were going to need a bigger ship... A MUCH bigger ship. We look forward to being able to fully service any order that may come to fruition. Hop on board - it s going to be quite a journey.