HP NEO RIFLE SLING Constructed of heavy duty, padded neoprene Adjustable for wide range user heights and rifle sizes Shoulder strap is slip resistant Quick-detach swivels included SKU: 35009700 ENCORE RIFLE CASE WITH BARREL POUCH Full length soft rifle case fits rifle with or without scope Side pouch holds one extra scoped barrel Thoroughly padded for excellent protection Inside Dim: 42 L x 7 1 2 H x 1 1/2 D Barrel pouch Dim: 33 L x 6 1/2 H x 2 1/4 D SKU: 35007478 SKU: 110117 HUNTER S BINO STRAP Securely holds binoculars close to the chest Adjustable elastic straps to guarantee perfect fit Heavy duty synthetic materials are designed to be scent resistant SPEED SHOT SLING WITH SPEED SHOT AMMO TUBES Constructed of heavy duty, padded neoprene Includes two accessory Speed Shots Adjustable for wide range user heights and rifle sizes Shoulder strap is slip resistant Quick-detach swivels included Multiple mounting options SKU: 31007502 SKU: 35009701 SOFT-SIDED GUN CASE Fits any scoped T/C Muzzleloader or Centerfire rifle Embroidered T/C logo along the side Soft padded sides and bottom Heavy duty reinforcement along bottom edge 3-zippered accessory pockets along right side Full wrap around nylon carry handles Heavy duty nylon construction Will accommodate a rifle up to 47 long Outside Dim: approx. 50 L x 10 H x 3 D ACCESSORIES MAGAZINES & CASE SLINGS 61
T/C ACCESSORIES CLEANING & MAINTENANCE T/C PRO HUNTER TOOL This tool can be used to remove and replace the grip cap, grip, forend and can be used to adjust the rear sight. Allows removal or replacement of the choke tube in 45 Colt/410 ga barrels. SKU: 35007992 NIPPLE WRENCH Made of hardened steel. Fits all #11 nipples (except T/C Scout) and fits musket cap nipples. SKU: 51017482 - For #11 Nipple Only SKU: 51017064 - For #11 and Musket Nipple ENCORE BARREL REMOVAL TOOL Allows easy removal of barrels. SKU: 35007503 WEDGE PIN PULLER Made of hardened steel. Taps out the forend wedge enough for claw end to pull it free. Also has a nipple wrench that fits all T/C nipples that take #11 except for T/C Scout. XT BREECH PLUG WRENCH Designed as a backup tool for all Speed Breech XT Models SKU: 31007062 SKU: 31007747 SKU: 1093582 IMPACT! SB BREECH PLUG WRENCH Precision steel tool to make removing and installing the breech plug in your Impact! SB muzzleloader easy. RAMROD ACCESSORY KIT, WITH STANDARD BULLET PULLER A combination of the most popular ramrod accessories in one pack. Includes: Worm (patch puller) Bronze Bore Brush Super Jag Standard ball & bullet puller Cotton bore swab RAMROD ACCESSORY KIT, WITH PRO HUNTER BULLET PULLER A combination of the most popular ramrod accessories in one pack. Includes: Worm (patch puller) Bronze Bore Brush Super Jag Pro-Hunter ball & bullet puller with aluminum alignment tool Cotton bore swab SKU: 31007234 -.45cal SKU: 31007298 -.50cal SKU: 31007240 -.50cal 62
T/C PRIMER CADDY Holds a reserve of 209 primers. Keeps them clean and dry and easy to find. Holds 9 primers and stays flexible in the cold weather. SKU: 31007891 DOG-BONE 209 PRIMING TOOL Durable polymer 209 priming tool holds two 209 shot sell primers on each end. Holds a reserve of 6 primers on main shaft. SKU: 31007808 209 FLEX CAPPER Durable, flexible polymer 209 capper presents two 209 shotshell primers, one at each end, while storing six more. Includes lanyard hole. SKU: 35008007 ACCESSORIES POWDER SPOUTS Makes it easier to pour black powder or black powder substitute without spilling. SKU: 31007223 - Pyrodex or Blackhorn 209 U-VIEW IN-LINE CAPPER Designed specifically for use with any muzzleloaders that use a musket cap or primer. Holds eight caps or primers. SKU: 31007233 - Musket Caps Only SKU: 31007219-209 Primers Only PRO HUNTER BULLET PULLER WORM (PATCH PULLER) Specially designed for removing spire point and polymer tipped bullets Used for field cleaning or to retrieve a cleaning patch which is lost from the bore of a muzzleloader. Fits 10-32 thread,.50 caliber. in the bore. Solid brass with strong spring steel fingers, fits all T/C muzzleloading calibers. SKU: 51169009 SKU: 51169010 SKU: 51169014 IN-LINE CAPPER FOR #11 CAPS Solid brass body with steel jaws. Allows the plunger spring to be locked in compressed position for easy loading. American Made. Holds 17 #11 percussion caps. SKU: 31007025 BALL, BULLET & WAD PULLER Threads onto ramrod and successfully removes stuck balls, bullets or shotgun wads from the bore of a muzzleloader. Fits 10-32 threads,.45 and.50 calibers. CLEANING & MAINTENANCE 63
T/C ACCESSORIES CLEANING & MAINTENANCE MUZZLELOADER CLEANING JAG Solid brass cleaning jag holds patches against bore for effective cleaning. Fits 10 32 thread ramrod. SKU: 51169085 -.50cal SKU: 53169084 -.54 and 56cal UNIVERSAL LOADING TIP & CLEANING JAG Knurled brass loading tip that will handle spire point bullets, hollow point conical bullets or round nose bullets. The contour fits all three types, preventing deformity of the tip during the loading process. Fits 10-32 thread ramrod or short starter. SKU: 54169071 -.45cal SKU: 54169067 -.50cal EXTENDED SUPER JAG Knurled to provide maximum contact between patch and bore. Long stepped shank prevents patches from binding. Concave tip allows use for loading with spire point bullets. Adds 3¾ to ramrod. The Extended Jag is necessary for cleaning all 28 muzzleloader barrels. Fits 10-32 threads. SKU: 54167227 -.45cal SKU: 54169087 -.50cal SUPER JAG Knurled to provide maximum contact between patch and bore. Long stepped shank prevents patches from binding. Concave tip allows use for loading with spire point bullets. Fits 10-32 threads. SKU: 54169241 -.45cal SKU: 54169243 -.50cal SKU: 54169245 -.54cal REPLACEMENT O-RINGS Replacement O-Rings for the T/C STRIKE Muzzleloader. For use on Primer Adapter Plugs. Quantity pack of 3. SKU: 3005294 SKU: 1094269 IMPACT! SB REPLACEMENT O-RINGS Replacement O-Rings for the Impact! SB Muzzleloader. For use on Primer Adapter Plugs. Quantity pack of 3. BREECH AND FIRE CHANNEL BRUSH SET Brushes designed specifically to clean the breech area and the fire channel of the T/C STRIKE muzzleloader. BREECH PLUG CLEANING BRUSH Makes cleaning the removable breech plug in a T/C In-line a snap. Long enough to reach into the threads in the barrel/receiver, as well. BREECH BRUSH & FIRE CHANNEL BRUSHES Includes the Breech Plug Cleaning Brush and Fire Channel Brush for cleaning your T/C muzzleloader. SKU: 3005562 SKU: 35009507 SKU: 35009508 64
BRUSH & SWAB SET A bronze bore brush and cotton bore swab sold together. Standard 10-32 threads, for.50 Caliber firearms. SKU: 35007484 BRONZE BORE BRUSHES Available with 2 thread sizes: 5 16-27 which fits shotgun cleaning rods and 10-32 threads which fits muzzleloading ramrods. SKU: 35009500-10-32 thread,.45cal SKU: 31009405-5/16-27 thread,.50cal SKU: 35009502-10-32 thread,.50cal SKU: 35009504-10-32 thread,.54cal COTTON BORE CLEANING SWABS Used to clean and oil the bore of a muzzleloader or to apply Natural Lube 1000 Plus Bore Butter as a seasoning agent. Fits 10-32 threads. SKU: 35009514 -.50cal SKU: 35009516 -.54cal ACCESSORIES PRIMER ADAPTER PLUGS For use with the T/C Adapt Breech System in the T/C STRIKE Muzzleloader. SKU: 3005295 - For use with pellet loads SKU: 3005296 - For use with loose powder IN-LINE NIPPLE PICK Brass housing with extended bent arm houses a fine wire. Pushing the button forward extends the wire. Fits all in-lines and is easy to use even when rifle is scoped. Lanyard bail allows for secure attachment. SKU: 31007244 BREECH PLUG CLEANING TOOL Spin the breech plug through the stainless steel bristles to thoroughly clean the threads of your breech plug. SKU: 31007465 ENCORE ADJUSTABLE HINGE PIN Encore adjustable hinge pin locks the position of the hinge pin so that it is exactly the same every time. No rotation or drifting from side to side. Fits all standard and Pro Hunter Encore barrels. SKU: 31007010 BREECH THREAD CLEANER FOR ENCORE & OMEGA Cleans the breech threads in the barrel with the thread cleaner. The thread cleaner eliminates the need to brush or patch the breech of the barrel. SKU: 31007499 EXTENDED POLYMER CLEANING JAG Rugged steel shank with polymer over-molding protects bore during cleaning. Fits.50 caliber muzzleloaders, 10-32 threads fits most ramrods. SKU: 54169083 (Does Not fit Speed Breech ) CLEANING & MAINTENANCE 65
T/C ACCESSORIES CLEANING & MAINTENANCE T/C IN-LINE CLEANING SYSTEM Works with any.50 caliber in-line ignition muzzleloader. LOW-ODOR FORMULA NUMBER 13 BORE CLEANER Industry standard for muzzleloader cleaning, compatible with the Natural Lube 1000 Plus Bore Butter. NATURAL LUBE 1000 PLUS BORE BUTTER - TUBE Rust preventative on external surfaces of any firearm. Can also be used to lube bullets. Biodegradable, contains no petroleum-based oil or additives. SKU: 31007309-5 oz Natural Scent SKU: 31009065-8 oz Spray Bottle SKU: 31007409-5 oz Pine Scent SKU: 31009041-8 oz Pour Bottle SKU: 31007357 4 oz. Number 13 Bore Cleaner Bronze Bore Brush.50 Caliber Super Jag.50 Caliber Cotton Cleaning Patches Cleaning/Utility Brush A Silicone Gun Cloth.75 oz Natural Lube 1000 Plus Bore Butter.23 oz Super Lube Anti-Seize Lubricant NUMBER 13 PRE-SATURATED CLEANING PATCHES 2½ diameter, 100% cotton patches pre-saturated in Number 13 Bore Cleaner. Works well with.45.58cal muzzleloaders. Quantity 100. SKU: 31007143 WARNING: Cancer - NATURAL LUBE 1000 PLUS BORE BUTTER SEASONING PATCHES 2½ diameter, 100% cotton patches pre-saturated in Natural Lube 1000 Plus Bore Butter. Works well with.45.58cal muzzleloaders. SKU: 31007147 - QTY 25/bag SKU: 31007141 - QTY 50/jar SKU: 31007003 - QTY 100/jar GENERAL PURPOSE CLEANING PATCHES 2½ diameter, 100% cotton patches. Offset their position on the jag, centering, or doubling the patch thickness, they will work well with.45.54 cal. black powder &.375.45 centerfire. SKU: 31007037 - QTY 100/bag SKU: 31007178 - QTY 250/bag 66
HUNTER S CHOICE MUZZLELOADING ACCESSORY KIT (1) T-handle short starter/ramrod extension (10).50 cal. ShockWave Sabots w/250 grain ShockWave Bullets (1) Flex loader for easy field carry of prepared loads (1) 4 oz. bottle of Number 13 Bore Cleaner (50) 2½ cotton patches (25) 2½ All-Natural seasoning patches (1).23 oz. tube of Super Lube (1) Universal loading tip/jag (1) Breech brush SKU: 31007101 T/C BASIC MUZZLELOADER CLEANING KIT 4 oz Number 13 Bore Cleaner 2½ Cleaning Patches 25pk Natural Lube 1000 Plus Bore Butter saturated cleaning patches 25pk Bronze bore brush Knurled brass extended Super Jag SKU: 31007333 ESSENTIAL MUZZLELOADER CLEANING PACK 4 oz Number 13 Bore Cleaner.23 oz Super Lube Anti-Seize Lubricant 100% Cotton cleaning patches.75 oz Natural Lube 1000 Plus Bore Butter SKU: 31007217 ACCESSORIES GORILLA GREASE An all-natural, anti-seize lubricant formulated for use on the threads of removable breech plugs and nipples. Works with any removable breech plug or nipple. ¼ oz tub. SKU: 31007356 ALL-PURPOSE ANTI-SEIZE SUPER LUBE Synthetic lubricant protects threads of muzzleloading breech plugs as well as shotgun choke tubes from corrosion. ½ oz tube. SKU: 31007362 BREECH PLUG LUBE APPLICATOR WITH SUPER LUBE Uniformly applies lubricant to the breech threads in the barrel. Super Lube contains PTFE which coats the threads in the breech to prevent the breech plug from getting seized. Works on most break-open and pivoting breech muzzleloaders. Applicator with 1.44 oz. SKU: 31007497 (Does Not fit Encore Pro Hunter) WARNING: Cancer - CLEANING & MAINTENANCE SHOCK WAVE is a registered trademark of Vista Outdoor and is used under license. 67
T/C ACCESSORIES CLEANING & MAINTENANCE T17 BREECH PLUG GREASE Synthetic-based lubricant that withstands the high operating temperatures of muzzleloaders to prevent residue from binding breech plugs. Works well on nipples and shotgun choke tubes. ½ oz tube with applicator tip. T17 NATURAL LUBE 1000 PLUS Enhanced to work with Hodgdon s Triple Seven powder. An all natural lubricant which reduces fouling, improves accuracy and prevents rust. Specially formulated to work with sabot bullets. 3 oz tube. T17 BREECH PLUG CLEANER/JAR Solvent for cleaning breech plugs, no brushing or scrubbing required. Shake for 30 seconds then wipe clean. SKU: 31007491 SKU: 31007479 SKU: 31007433 WARNING: Cancer - T17 FIREARM WIPES Hand wipes that coats the firearm with a micro thin layer of protectant that withstands the corrosive effects of black powder fouling. Use these wipes prior to hunting in bad weather. Keeps your firearm in factory condition. Quantity 50. T17 MUZZLELOADER BREECH PLUG WIPES Quickly wipe off caked on fouling and grease from breech plugs and between breech plug threads. Works great for traditional black powder and most black powder substitutes. Quantity 50. T17 FOAMING BORE CLEANER Effectively cleans and neutralizes the harmful fouling in the bore from black powder and black powder substitutes. Eliminates the need to brush your barrel. 7 oz can. SKU: 31007493 SKU: 31007541 WARNING: Cancer - SKU: 31007495 WARNING: Cancer - T17 BLACK POWDER BORE CLEANER This solvent is specially formulated to effectively clean and neutralize the harmful fouling left in the bore from Triple Seven and other black powder substitutes. 8 oz. Bottle SKU: 31007488 WARNING: Cancer - SKU: 31007480 T17 PRO HUNTER ACCESSORY KIT 2 oz T17 Bore Cleaning Solvent ½ oz T17 Breech Plug Anti-Seize Grease 2 ½ diameter Dry Cotton Patches 40 Cleaning Patches 25 Seasoning Patches Breech Thread Cleaning Brush T-handle Short Starter (10).50 caliber Super Glide Sabots with 250 grain Shock Wave Controlled Expansion bullets (2) Speed Shots Extended Polymer Cleaning Jag 68
T17 SEASONING PATCHES Pre-saturated with all-natural Natural Lube 1000 Plus lubricant. Reduces fouling, improves accuracy and prevents rust. 2 ½ diameter (works well with.45 &.50 cal. muzzleloaders). Quantity 50 patches. SKU: 31007477 T17 MUZZLELOADER CLEANING KIT 2 oz bottle T17 Bore Cleaner 3/4 oz T17 Natural Lube ½ oz. T17 Breech Plug Anti-Seize Grease (20) 2 ½ dry cotton cleaning patches.50cal Extended Cleaning Jag.50cal Bronze Bore Brush Breech thread cleaning brush SKU: 31007473 SKU: 31007471 T17 OILED PATCHES Pre-saturated with oil formulated to prevent rust and corrosion and displace moisture. 2 ½ diameter (works with most bore sizes). Quantity 50 patches. SKU: 31007372 T17 BASIC MUZZLELOADER CLEANING KIT 2 oz. bottle T17 Bore Cleaning Solvent 3/4 oz. T-17 Natural Lube ½ oz. T-17 Breech Plug Anti-Seize Grease (40) 2 ½ dry patches T17 PRE-SATURATED CLEANING PATCHES 100% double knapped cotton patches. Specially formulated to clean and neutralize the corrosive effects of black powder and black powder substitutes. 2½ (works well with.45 &.50 cal.). Quantity 100 patches. SKU: 31007483 T17 BLACK POWDER CLEANING KIT Comes with a collapsible cleaning rod. Works with barrels up to 32 long. 3-piece aluminum rod with molded handle 3/4 oz T17 Natural Lube 1000 Plus 2 oz of T17 Bore Cleaner Solvent T17 Breech Plug Grease.50 cal Bore Brush.50 cal Bore Swab.50 cal Jag (20) Cleaning patches SKU: 31007530 WARNING: Cancer - All T17 Solvents are specially formulated to work on modern In-line and traditional muzzleloaders. T17 is designed for use in cleaning the corrosive fouling & plastic deposits from muzzleloaders when using Black Powder, pelletized powder, and black powder substitutes like Triple Seven. This modern formula removes plastic, copper and lead deposits then leaves a micro-thin layer of protectant behind to help prevent rust and corrosion. ACCESSORIES CLEANING & MAINTENANCE SHOCK WAVE is a registered trademark of Vista Outdoor and is used under license. 69
T/C ACCESSORIES MUZZLELOADING PROJECTILES Bonded Core construction penetrates tough hide and bone with no separation of core and jacket. SHOCK WAVE BONDED CORE BULLETS IN SUPER GLIDE SABOTS Made for.50 caliber rifles with bonded core construction. Quantity 15. SKU: 17008245-250 Grain SKU: 17008235-300 Grain SHOCK WAVE BONDED CORE BULLETS IN MAG EXPRESS SABOTS Made for.50 caliber rifles with bonded core construction. Quantity 15. SKU: 17008207 - For 250 Grain Only SKU: 17008211 - For 300 Grain Only SHOCK WAVE CONTROLLED EXPANSION BULLETS IN MAG EXPRESS SABOTS Polymer tip increases the Ballistic Coefficient for sustained high velocity down range and punches into the pocket to open up the nose cone for fast expansion. SKU: 17008244 -.45cal, 200 Grain, QTY 15 SKU: 17008238 -.50cal, 200 Grain, QTY 15 SKU: 17008242 -.50cal, 250 Grain, QTY 15 SKU: 17008236 -.50cal, 250 Grain, QTY 30 SKU: 17008230 -.50cal, 300 Grain, QTY 15 SHOCK WAVE CONTROLLED EXPANSION BULLETS IN SUPER GLIDE SABOTS Made for.50 caliber rifles with controlled expansion construction. Quantity 15. SKU: 17008208-250 Grain SKU: 17008215-300 Grain CHEAP SHOT SABOTS WITH HOLLOW POINT BULLETS All-lead 240 grain, hollow point bullet made for.50 caliber rifles. Deep hollow point cavity provides maximum expansion and down range energy transfer. Quantity 20. SKU: 17008296 SUPER 45 XR SABOTS WITH HOLLOW POINT XTP BULLETS Superior.40 caliber 155 grain jacketed XTP hollow point bullets, for.45 caliber muzzleloaders, provide magnum performance without the recoil. Provide nearly 2 times the expansion of the bullet s original diameter Quantity 30. SKU: 17007759 XTP BULLETS JACKET HOLLOW POINT IN MAG EXPRESS SABOTS XTP bullets are known for their tremendous expansion and are the choice for any big game animals. Quantity 30. SKU: 17008246 -.50cal, 240 Grain SKU: 17008294 -.50cal, 300 Grain SKU: 17008287 -.54cal, 250 Grain SURE FIRE JACKETED HOLLOW POINT BULLETS IN MAG EXPRESS SABOTS.45 caliber, 230 grain jacketed hollow point bullet made to go in.50 caliber rifles. Quantity 20. SKU: 17008206 SUPER GLIDE SABOTS Super.Glide sabots are the first sabots that can be loaded with one hand. Made for.50 caliber rifles. Quantity 50 (sabots ONLY). SKU: 17008252 - For.45cal bullets 70 SHOCK WAVE is a registered trademark of Vista Outdoor and is used under license.
MAG EXPRESS SABOTS Made for.50 caliber rifles to use with jacketed or lead pistol bullets. Quantity 50 (sabots ONLY). SKU: 17008277 - For.44cal bullets SKU: 17008281 - For.45cal bullets MAXI-BALL Pre-lubed with Natural Lube 1000 Plus Bore Butter to eliminate the need to wipe the bore or clean between shots. Made for.50 caliber rifles. Quantity 20. SKU: 16007895-320 Grain SKU: 16007795-370 Grain MAXI-HUNTER Maxi-Hunter bullets gives you maximum expansion on deer-sized game. Pre-lubed with Natural Lube 1000 Plus Bore Butter to eliminate the need to wipe the bore or clean between shots. Made for.50 caliber rifles. Quantity 20. SKU: 17007885-275 Grain SKU: 17007785-350 Grain ACCESSORIES 100% COTTON ROUNDBALL PATCHES 100% cotton patches available un-lubricated or pre-lubricated with T/C Natural Lube 1000 Plus Bore Butter. Biodegradable and non-toxic. Quantity 100. SKU: 31007030 -.45-.50cal UNLUBED SKU: 31007043 -.45-.50cal PRELUBED SKU: 31007034 -.54-.56cal UNLUBED SKU: 31007044 -.54-.56cal PRELUBED PILLOW TICKING ROUNDBALL PATCHES The tight weave 100% cotton fabric resists tearing and prevents burnthrough. Patches are pre-lubricated with Natural Lube 1000 Plus Bore Butter. Biodegradable and non toxic. Quantity 100. SKU: 31007135 -.32-.36cal SKU: 31007136 -.45-.50cal SKU: 31007137 -.54-.56cal SKU: 31007138 -.58cal SWAGED LEAD ROUND BALLS Pure lead.50 caliber, 175 grain roundballs for hunters who prefer (or are required by law) to use patched roundballs in their muzzleloaders. Quantity 100. SKU: 16008276 MUZZLELOADING PROJECTILES WADE MIDDLETON - WHITETAIL DIARIES 71
T/C ACCESSORIES POWDER MEASURES ADJUSTABLE BLACK POWDER MEASURE Positive snap ring clicks off each increment of adjustment and holds cavity at desired volume. Measures 50-120 grains in 10 grain increments. T/C MAGNUM POWDER MEASURE For use with any of the in-line T/C muzzleloaders when using magnum charges of up to 150 grains of Black Powder or Pyrodex equivalent. Measures in 10 grain increments. FIELD POWDER MEASURE Compact lightweight powder measure with solid brass cup and durable polymer adjusting sleeve marked in 10 grain increments from 20 to 120 grains. Brass locking set screw can be locked into infinite positions. SKU: 31007040 SKU: 31007102 SKU: 31007152 U-VIEW POWDER MEASURE See the exact level of the powder in the tube. Includes loading spout that swivels out of the way to fill the measure. Graduated in 5 increments from 15 to 125 grains. SKU: 31007222 U-VIEW BLACK POWDER FLASK See-thru powder flask small enough to fit in your pocket yet it holds enough powder for a dozen reloads. Easy to control, spring loaded plunger for dispensing powder into a measure. SKU: 31007224 SKU: 31007048 HUNTER S BLACK POWDER MEASURE Lightweight powder measure with knurled collet to lock the cavity at any setting from 20 to 120 grains. Has a sliding funnel and calibrated adjusting sleeve made of durable polymer to reduce weight. Marks indicate 10 grain increments. 72
FLINT LOCK RIFLE FIELD KIT Contains Pan brush Jaw tightening rod Stainless steel touch hole pick * NOTE: The Pan Charger is to be used with black powder only. All implements must be used in accordance with the instructions provided by Thompson/Center. FLINT LOCK PAN CHARGER Holds approximately 80 grains FFFFG (4F) Black Powder. Each dispensed charge fills the pan of a T/C rifle one-half full. Small screwdriver, with 3 different size blades Key ring (2) Flints SKU: 31007099 SKU: 31007020 SKU: 31007299 BASIC FLINT LOCK ACCESSORY KIT Works with any.50 caliber flint lock muzzleloader. Contains: (1) Pan Charger (1) Touch Hole Pick (1) Leather Pad (2).50 caliber Quick Shots ACCESSORIES FLINT LOCK TOUCH HOLE PICK Rugged stainless steel touchhole pick with lanyard loop. SKU: 31007113 SKU: 51017093 FLINT LOCK TOUCH HOLE PICKS Durable polymer spark proof. Quantity 2. WARNING: Cancer - FLINTS FOR MUZZLELOADERS These high quality rifle flints are recommended for use with all T/C flint locks. Quantity 4. SKU: 31007200 FLINT LOCK ACCESSORIES 73
T/C ACCESSORIES MUZZCHARGER MUZZCHARGER BLACK POWDER SPEED LOADER 3-shot revolving cylinder holds pre-measured charges ready-to-load Single-stroke loading action seats powder charge and bullet into barrel in single motion Universal muzzle clamp aligns charger with any In-line muzzleloader barrel Built-in primer holder keeps primers safe and dry Includes decapping tool for removing stuck 209 primers from breech plug Holds up to 150 grains of black powder SKU: 1078975 Simple 3 step operation! The MuzzCharger can hold up to 3 pre-measured loads in a compact easy to access package! 1. Charge the handle 3. Charge Muzzleloader! Primer Decapper removes stubborn spent primers and tucks into the casing of the MuzzCharger 2. Rotate a speed load into position LARAMY SASQUATCH MILLER - LAST OF A BREED 74
Thompson/Center Breech Plugs are made of the highest quality materials for years of rugged service. As T/C has evolved, so have our muzzleloaders. Advancements in extraction, use, fouling prevention, and cleaning make T/C Breech Plugs some of the best in the modern muzzleloading market. Below is a chart detailing which Breech Plug works with which model of T/C Muzzleloader. BREECH PLUG Item # NAME Triumph & Encore Triumph Bone Pro Hunter & XT Encore & Encore Collector Endeavor Pro Hunter FX Pro Hunter 1st Gen ONLY 31007542 SPEED BREECH XT X 501000000 SPEED BREECH 3 X 31007523 SPEED BREECH X 31007729 TRIUMPH SPEED BREECH XT X STAINLESS STEEL BREECH PLUG Encore 209x50 & Omega IMPACT! IMPACT! SB 31007761 IMPACT! BREECH PLUG X 31007763 SS BREECH PLUG X 1093597 IMPACT! SPEED BREECH X Speed Breech, Speed Breech 3, Speed Breech XT, Triumph Speed Breech XT, Impact! Breech Plug and Stainless Steel Breech Plugs all have a limited lifetime warranty. Extractor in Place Extractor Out Position ACCESSORIES BREECH PLUGS REPLACEMENT PERCUSSION CAP NIPPLES (For use with No.11 Percussion Caps) For most T/C Cap Lock rifles. (Except Cherokee & Seneca ). ¼-28 threads. Fits many TC In-lines also (except Encore 209x50, T/C Scout, Omega & Triumph models). SKU: 51167070 209 PRIMER ADAPTER FOR BLACK DIAMOND & WOODS RIFLE Primer adapter for older model T/C Muzzleloaders. Must be used with the correct striker. SKU: 31007805 SKU: 31007211 Patent #7,257,917 ENCORE 209X50 E-Z TIP EXTRACTOR The E-Z Tip extractor for the Encore 209x50 Magnum muzzleloader is an accessory item that allows the extractor to be tipped out of the way for easy removal of the breech plug. 75
T/C ACCESSORIES BULLET STARTERS & RODS STANDARD BULLET STARTER The purpose of this implement is to start a tight fitting ball into the muzzle and to drive it far enough down the barrel so that it can be handled with the ramrod. For use with.45-58 Cal. DELUXE BULLET STARTER Similar to the standard model except that it offers the added feature commonly called a palm saver. This feature offers protection to the hand and is particularly helpful when a number of shots are being fired or when a tight fitting ball or bullet is difficult to seat. For use with.45-.58cal PALM SAVER SHORT STARTER A lightweight, compact short starter with a palm saver built right into the end. SKU: 31007050 SKU: 34007054 SKU: 31007144 T-HANDLE SHORT STARTER & RAMROD EXTENSION Features a hardwood handle with a 2-piece solid brass rod, coupled with standard 10-32 threads. Converts your ramrod to a range rod and provides you with extra leverage for firmer, more uniform seating. RUGGED ROD RANGE ROD 32 long solid aluminum stock and hard coat anodized. Features a tough polymer palm saver knob for a firm grip when driving down balls, bullets or sabots. Accepts standard 10-32 threaded accessories. FLEX PRIMING PALM SAVER Fits over the end of the ramrod to ease pressure on the hand when seating projectile. Made of soft Bio-Flex molded over a hard fiber core for superior durability. Houses 4 spare 209 primers, with 2 ready for instant priming. SKU: 31007079 SKU: 31009692 SKU: 35009611 LOAD AND CLEAN POWER ROD Universal ramrod with cut-to-length design for use with muzzleloader barrels up to 28 5.5 telescoping section allows the ramrod to function as a cleaning rod on removable breech plug rifle designs Removable, universal brass bullet seater doubles as a cleaning jag 10-32 threaded ferrule allows for attachment of additional ramrod accessories Compact T-handle folds down and fits into muzzleloader forend, allowing constant attachment of bullet loading tips Un-cut max length extended: 30.8 Un-cut max length not-extended: 25.4 T-handle rotates Independently T-handle folds for storage SKU: 1081862 Power rod unscrews for up to 5.5 extension 76
UNIVERSAL RUGGED ROD 32 long solid aluminum ramrod which can be cut to fit a muzzleloader. The seating end of the ramrod is threaded to accept standard 10-32 thread ramrod accessories. SKU: 31009201 SKU: 31009139 POWER ROD RAMROD Universal Power Rod for all styles of muzzleloaders Works with barrels up to 31 in length Tip accepts 10-32 thread loading and cleaning tools Pivoting handle gives maximum grip and folds in for storage SKU: 31007980 - Universal Power Rod (cut to length) SKU: 31007983 - Encore Pro Hunter & Omega (28 barrel) SKU: 31007979 - Encore Muzzleloader (26 barrel) Patent #6,145,235 UNIVERSAL LIGHTWEIGHT RAMROD 31 universal ramrod that you cut to the length you need. Lightweight, hollow aluminum. Accepts standard 10-32 thread ramrod accessories. T-HANDLE SHORT STARTER WITH EXTENDED SUPER JAG Lightweight, compact short starter with a removable seating end which allows for the conversion of the ramrod into a work rod. Extended Super Jag adds 3¾ to ramrod and is necessary for cleaning all 28 muzzleloader barrels. 10-32 threads. SKU: 31007239 RUGGED ROD RAMROD Aluminum for T/C Omega.45 &.50 caliber, 28 barrel. SKU: 310099144 T-HANDLE SHORT STARTER WITH UNIVERSAL LOADING TIPS Attaches to ramrod to extend the length. Includes interchangeable tips, short starter, brass loading tips and aluminum seating head. SKU: 54169058 SKU: 31007127 T-HANDLE SHORT STARTER & RAMROD EXTENSION Lightweight, compact short starter with a removable seating end which allows for the conversion of the ramrod into a work rod. ACCESSORIES BULLET STARTERS & RODS 77
T/C ACCESSORIES SPEED LOADERS & MISCELLANEOUS The Magnum QuickShot holds a pre-measured powder charge of up to 150 grains of loose Black Powder or Pyrodex equivalent - or three Pyrodex 50 grain equivalent pellets. RIP-CORD SPEED LOADER Unique speed loader with a second charge just a quick pull away. Pull the tube away from its top and load a charge. Bottom houses a 209 capper for instant priming plus a spare. Made of bio-flex. SKU: 35009613 SPEED SHOT - 2 PACK The Speed Shot holds a magnum muzzleloader charge for quick follow-up shots. The tubes can be cut to fit specific loads. Speed Shots can be used alone or in conjunction with our sling, belt pouch or stock pouch. SKU: 31007498 QUICKSHOT LOADING TOOL Holds a pre-measured powder charge, projectile and priming in a waterproof container. Use with patch and ball, Maxi-Ball or Sabot. QuickShot may be used with either a percussion or flint lock rifle. Quantity 3. SKU: 31007027 -.45cal, Green SKU: 31007028 -.50cal, Red SKU: 31007029 -.54cal, Blue SKU: 31007104 -.50cal Magnum, Black SKU: 31007109 -.54cal Magnum, Orange Holds pre-measured powder charges (up to 150 grains of black powder or Pyrodex equivalent or three Pyrodex 50 grain equivalent pellets)..50 CAL. MAGNUM QUICKSHOT VALUE PACK.50 caliber QuickShot with (3).50 cal. Mag Express Sabots & 240 grain XTP bullets. SKU: 31007004 4-N-1 QUICKSHOT Carries your powder, projectile, cap and serves as your bullet starter. Also holds a 209 Primer in recess on the top. Quantity 2. SKU: 31007057 -.50cal SKU: 31007058 -.54cal SKU: 31007106 -.50cal mag 4-N-1 QuickShot MUZZLELOADING AMMO TUBES - 3 PACK Carry spare sabots or Pyrodex pellets Can also be cut or sized to accommodate your specific charge with sabot SKU: 31007232 U-VIEW FLEX LOADER Holds three loading tubes and four 209 shot shell primers. Accepts magnum charges of three Pyrodex Pellets with sabot. Made of Bio-Flex. SKU: 35008031 -.45-.50cal rifles SKU: 31007238-3 replacement tubes 78
TOUCH HOLE BUSHINGS For T/C Firestorm Flint Lock LACE-ON BUTTSTOCK FLEX LOADER FOR MUZZLELOADERS Fits.50/.45 caliber. Quantity 3 tubes. SKU: 57167327 SKU: 31007889 SKU: 31007764 BREECH PLUG WRENCH FOR ENCORE 209X50 & OMEGA Realtree & associated camouflage & patterns are trademarks & copyrights of Jordan Outdoor Ent, Ltd. Mossy Oak & associated camouflage & patterns are trademarks & copyrights of Hass Outdoors, Inc. Mossy Oak, Break-Up Country and Bottomland are trademarks of Haas Outdoors, Inc. Hogue & Overmolded are registered trademarks of Hogue Grips (Aaron Hogue and Patrick Hogue). LIMBSAVER is a trademark of SIMS Vibration Laboratory Bone Collector is a registered trademark of Michael Waddell LLC and is used under license. XTP is a registered trademark of Hornady Manufacturing Co. Pyrodex is a registered trademark of Hodgdon Powder Company, Inc. Triple-7 is a registered trademark of Hodgdon Powder Company, Inc. Bio-Flex is a registered trademark of FKuR Kunstoff GmbH. Super Lube is a registered trademark of SynCo Chemical Corp. Maxima is a registered trademark of WSM Manufacturing, LLC. SHOCK WAVE is a registered trademark of Vista Outdoor and is used under license. MagPul and M-LOK are trademarks of MagPul Industries Corp. Caldwell is a registered trademark of Battenfeld Technologies, Inc. 10/22 is a Registered Trademark of Sturm, Ruger & Co., Inc. Williams is a trademark of Williams Gun Sight, Co. G2 is trademark of Next Camo, LLC. ACCESSORIES MISCELLANEOUS 79
FOR FIREARMS FOR ACCESSORIES 2100 Roosevelt Ave. Springfield, MA 01104 Customer Service: 866-730-1614 Web: www.tcarms.com Battenfeld Technologies Inc. 2501 LeMone Industrial Blvd. Columbia, MO 65201 Customer Service: 877-509-9160 Web: accessories.tcarms.com E-mail: tcaccessories@btibrands.com 2019 Smith & Wesson Corp. All Rights Reserved HUNTERS SHOOTERS COLLECTORS Join the Thompson/Center Collectors Association P.O. BOX 18111 OKLAHOMA CITY, OK 73154 WWW.THOMPSONCENTERASSOCIATION.ORG facebook/tcarmsco twitter/tcarmsco instagram/tcarmsco youtube/tcarmsco REV.01-2019