Primetac Generic Material Safety Data Sheet For Filament Reinforced Tapes 09/10/2008 Material Safety Data Sheet Primetac products should not present a health and safety hazard when being used under normal and recommended conditions. However, potential health and safety hazards may occur when Primetac products are used not in accordance with ordinary conditions or recommended applications. Section 1: Product and Company Identification Product Name: Company: Primetac Filament Reinforced Tapes Primetac Corp 223-B Gates Road Little Ferry, NJ 07643 800-285-6980 Issue Date: September 10, 2008 Section 2: Ingredients Ingredient CAS No. % By Weight Glass Fiber Reinforced, Polypropylene Backing None 45-75 Polyester Fiber Reinforced, Polyester Backing None 45-75 Glass Fiber Reinforced, Polyester Backing None 45-75 Tackified Synthetic Rubber Adhesive None 25 55 Page 1 of 5
Section 3: Hazards Identification Emergency Overview: Odor, Color, Grade: Clear, White or Tan, little to no odor General Physical Form: Solid Immediate health, physical and environmental hazards: The products present low environmental hazards. The products should not present a health and safety hazard when being used under normal and recommended conditions. However, potential health and safety hazards may occur when Primetac products are not used under ordinary conditions or recommended applications. Potential Health Effects: Eye Contact: No potential health effects are anticipated under normal conditions. Vapor may form at elevated temperatures and may be irritating to the eyes. Skin Contact: No potential health effects are anticipated under normal conditions. Exposure to heated material may cause thermal burns. Inhalation: No potential health effects are anticipated at ambient temperature (0-100 F). Vapor may form at elevated temperatures and may be irritating to the respiratory tract. Ingestion: Not anticipated. Section 4: First Aid Measures First Aid Measures: Eye Contact: Skin Contact: Inhaled: Ingested: Page 2 of 5
Section 5: Fire Fighting Measures A. Flammable Properties Flash Point: Auto ignition Temperature: Flammable Limits: May produce carbon dioxide, carbon monoxide or other vapors during fire. B. Fire Fighting Use fire extinguishers with class B agents (dry, chemical, carbon dioxide) Section 6: Accidental Release Measures Not applicable Section 7: Handing and Storage A. Handling The products are considered an article, which do not release hazardous chemical under normal application conditions. Avoid prolonged skin contact. Use general ventilation. B. Storage Not applicable. Section 8: Exposure Controls and Personal Protection 8.1. Personal Protection Equipment 8.1.1. Eye Contact: avoid eye contact 8.1.2. Skin Protection: Avoid prolonged or repeated skin contact. Gloves are not normally required. 8.1.3. Respiration Protection: Airborne exposures are not expected to be high enough to require respiratory protection under normal conditions 8.1.4. Maintain good personal hygiene 8.1.5. Work Place Exposure Guidelines: Page 3 of 5
Section 9: Physical and Chemical Properties Odor Color General Physical Form Auto Ignition Point Flash Point Flammable Limits Boiling Point Density Vapor Density Vapor Pressure PH Solubility in Water Melting Point Evaporation Rate Specific Gravity Viscosity Percent Volatile Little or no odor Clear, white or tan Solid Section 10: Stability and Reactivity Stability: Stable Conditions to Avoid: None known Hazardous Polymerization: Will not occur Hazardous Decomposition or By-Products: Hazardous decomposition is not anticipated under recommended application conditions. Section 11: Toxicological Information Please refer to Section 3 for available information and potential health effects. Section 12: Ecological Information Page 4 of 5
Section 13: Disposal Consideration Dispose of waste product in a sanitary landfill, or incinerate the waste product in a commercial or municipal incinerator. Consult applicable local regulations or authorities before disposal. Section 14: Transportation Information Not regulated Section 15: Regulatory Information Chemical Inventories: The products are defined as an article by TSCA regulations, and therefore are exempt from the inventory listing requirements. Other Regulations: please contact Primetac for more information Section 16: Other Information NFPA Hazard Classification: Health: 0 Flammability: 1 Reactivity: 0 Special hazards: None This information relates to the specific products designated, may not be valid when used in combination with any other materials or in any process. Such information is based on the best of our knowledge and belief as of the date compiled. However its accuracy, reliability or completeness is not guaranteed. It is the users responsibility to determine the suitability and completeness of such information for their specific application. We do not accept liability for any loss or damage that may occur from the use of this information. Page 5 of 5