FS3 flexible LED strip
FS1 pg 24 FS2 pg 25 FS3 pg 26 23 FS4 pg 28 FS5 pg 29
FS1 COMPONENTS IP20 The FS1 is a modular single colour LED system which enables OEMs to easily construct bespoke schemes by selecting from the listed components. This flexible system is ideal in applications where curves and corners need to be negotiated for continuous lighting. The components are PCB s which include the K2 LED in the chosen colour and optic, with wiring connectors and VHB tape on the rear, plus a range of link leads and heat sink plates. 24 Thermagon 1kA thermally conductive MCPCB Heat sink mounting plate: Aluminium Suitable for interior applications Surface mount with Plug & Socket connection 100mm, 200mm or 300mm leads as std (Other lengths by special request) Optic L D D W L Non optic 1 x 1W Luxeon K2 LED 5 15 25 5 x25 no optic Option L W D No Optic 1 x K2 60 16 11 3 x K2 76 25 11 Optic 1 x K2 76 25 20 3 x K2 110 25 20 CW NW WW R G RB A C Component Lamp Cat. No. Input Power option power consumption Thermagon PCB 1 x K2 FS1C-20-PCB1K2 350 to 700mA 1.3 to 2.6W FS1 Non optic heat sink n/a LNK-HS n/a n/a FS1 Optic heat sink n/a LNK-HS1 n/a n/a Single colour leads 100mm starter lead n/a STR-100-1 n/a n/a 200mm starter lead n/a STR-200-1 n/a n/a 300mm starter lead n/a STR-300-1 n/a n/a 100mm interconnecting lead n/a INT-100-1 n/a n/a 200mm interconnecting lead n/a INT-200-1 n/a n/a 300mm interconnecting lead n/a INT-300-1 n/a n/a PCB termination link n/a BDTM-1 n/a n/a
IP20 FS2 COMPONENTS The FS2 is a modular single colour and full colour change LED system which enables OEMs to easily construct bespoke schemes by selecting from the listed components. By positioning the individual LED s close to each other, an intense colour mixing effect is produced, ideal for wall wash detailing and feature lighting. The components are PCB s which include the 3xK2 LED s in the chosen colour and optic, with wiring connectors and VHB tape on the rear, plus a range of link leads and heat sink plates. 25 Thermagon 1kA thermally conductive MCPCB Heat sink mounting plate: Aluminium Suitable for interior applications Surface mount with Plug & Socket connection 100mm, 200mm or 300mm leads as std (Other lengths by special request) For FS2 (3 x K2) dimensions refer to page 24 3 x 1W Luxeon K2 LED 5 15 25 5 x25 no optic CW NW WW R G RB A C R GB Component Lamp Cat. No. Input Power option power consumption Thermagon PCB 3 x K2 FS2C-20-PCB3K2 350 to 700mA 3.9 to 7.8W FS2 Non optic heat sink n/a LNK-HS1 n/a n/a FS2 Optic heat sink n/a LNK-HS2 n/a n/a Single colour leads 100mm starter lead n/a STR-100-1 n/a n/a 200mm starter lead n/a STR-200-1 n/a n/a 300mm starter lead n/a STR-300-1 n/a n/a 100mm interconnecting lead n/a INT-100-1 n/a n/a 200mm interconnecting lead n/a INT-200-1 n/a n/a 300mm interconnecting lead n/a INT-300-1 n/a n/a PCB termination link n/a BDTM-1 n/a n/a Colour change leads 100mm starter lead n/a STR-100-3 n/a n/a 200mm starter lead n/a STR-200-3 n/a n/a 300mm starter lead n/a STR-300-3 n/a n/a 100mm interconnecting lead n/a INT-100-3 n/a n/a 200mm interconnecting lead n/a INT-200-3 n/a n/a 300mm interconnecting lead n/a INT-300-3 n/a n/a PCB termination link n/a BDTM-3 n/a n/a RGB RJ45 starter lead n/a STR-RJ-2000-3 n/a n/a
FS3 IP20 IP67 The FS3 LED product comprises individual surface mounted high output LEDs every 20mm. Supplied by the metre, it is available in a wide range of single colours as well as RGB colour change. A cut point is provided at intervals along the strip for total versatility. A foil backed flexible PCB dissipates the heat from the LED s, thus improving LED life and colour stability. The FS3 is supplied complete with a self adhesive backing. 26 Flexible circuit board IP20 version suitable for interior applications IP67 version suitable for exterior applications supplied in flexible polycarbonate sleeve & c/w mounting clips Surface mount with self adhesive backing Cut points with solder connection points every 50mm IP20 versions available in 1m increments up to 6m for single colour, & up to 3m for RGB colour change IP67 versions available in up to 6m for single colour & up to 3m for RGB colour change 60 x SMD LED/m (single colour) 66 x RGB trinity SMD LED/m (colour change) no optic CW WW R G RB A R GB 50 Length 2 11.5 IP20 version 4.5 Length 13.5 IP67 version
FS3 27 Lamp Cat. No. Length Input Power option (m) power consumption IP20 Single Colour 60xSMD/m FS3-20-60SMD 1 12V DC 4.8W/m 60xSMD/m FS3-20-120SMD 2 12V DC 4.8W/m 60xSMD/m FS3-20-180SMD 3 12V DC 4.8W/m 60xSMD/m FS3-20-240SMD 4 12V DC 4.8W/m 60xSMD/m FS3-20-300SMD 5 12V DC 4.8W/m 60xSMD/m FS3-20-360SMD 6 12V DC 4.8W/m IP20 RGB Colour Change 66xSMD/m FS3-20-66SMD 1 24V DC 15.84W/m 66xSMD/m FS3-20-132SMD 2 24V DC 15.84W/m 66xSMD/m FS3-20-188SMD 3 24V DC 15.84W/m IP67 Single Colour 60xSMD/m FS3-67-60SMD 1 12V DC 4.8W/m 60xSMD/m FS3-67-120SMD 2 12V DC 4.8W/m 60xSMD/m FS3-67-180SMD 3 12V DC 4.8W/m 60xSMD/m FS3-67-240SMD 4 12V DC 4.8W/m 60xSMD/m FS3-67-300SMD 5 12V DC 4.8W/m 60xSMD/m FS3-67-360SMD 6 12V DC 4.8W/m IP67 RGB Colour Change 66xSMD/m FS3-67-66SMD 1 24V DC 15.84W/m 66xSMD/m FS3-67-132SMD 2 24V DC 15.84W/m 66xSMD/m FS3-67-188SMD 3 24V DC 15.84W/m
FS4 IP44 28 The FS4 is a revolution in flexible lighting, the result of many years of technical LED research and development it is now used on projects around the world. The FS4 offers the same intense light output and uniform brightness as neon but with one significant benefit in that it is bendable. It is easily shaped and cut to length, making installation simple and quick, and the all important appearance shows no hot spot. FS4 is ideal for signage and displays, architectural features and edge illumination e.g. stairs or ground marking. Body: Encapsulated polycarbonate IP44 suitable for interior and exterior applications Secured with fixing clips or channel section available separately Cut points every 100mm Available in 1m increments up to 48m: 72 x SMD LED/m (Single Colour) 237 x SMD LED/m (Colour Change) no optic CW WW R G RB A R GB 15 27 Single colour 20 30 RGB Colour change Lamp Cat. No. Weight Input Power option (kg) power consumption 72SMD/m FS4-72SMD 0.55/m 24V DC or 240V AC 9.4W/m 237SMD/m FS4-237SMD 0.7/m 24V DC or 240V AC 17W/m
IP65 FS5 The FS5 is a modular LED system which enables OEMs to easily construct and control full colour change applications using LED technology. Supplied as a 2m length, the FS5 is constructed with 20 pre-connected IP65 rated modules in total. (The 2m length achieved with each of the 20 modules installed at 100mm centres). This product can be used for a wide range of applications such as architectural detail lighting and is ideal for applications where curves and corners need to be negotiated for continuous lighting. 29 Body: Encapsulated polycarbonate IP65 suitable for interior and exterior applications Secured via the screw holes in the body of each module 15 x 5mm High Output LED no optic CW WW R GB 78 78 18 18 RGB Colour change Single colour 11 11 Lamp Cat. No. Weight Input Power option (kg) power consumption 15x5mm/module FS5-155mm 2.7/2m length 24V DC 0.96W/module