Schedule of Quantity and Rate for Annual Maintenance Rate Contract for Electrical Jobs for the year (Section-F) Cleaning Jobs.

Similar documents
FINAL FACILITY STUDY. KV1C Transformer Addition at Badwater Substation 2009-T1. November 17, 2009

" High Voltage Switch Yards & How Safe are these really" <Peter Rhodes> <Principal and High Voltage Solution. Com Ltd>

Kodiak Electric Renewable Energy Implementation. Colin Young System Engineer 4/26/2016

TEST BENCH FOR SAFETY VALVES

TURBO OXYGEN NITROGEN PLANT

Using propane cylinders safely

CompAir provide high quality and reliable Nitrogen solutions

Selection of Electrical PPE Tables

VERTICAL AIR COMPRESSORS

VERSION 1 SUMP PUMP PIT UNIT KAWAMOTO PUMP ASIA CO.,LTD.

VERTICAL AIR COMPRESSORS

Operators & Maintenance Manual OPERATOR S MANUAL USAGE AND MAINTENANCE F100M F100M. Powered Fixed Hoist Ideal for raised swimming pools and hot tubs

TB 42. Low maintenance effort saves on time and costs. High variability for vehicle types, construction and expan- sion options

INSTRUCTION MANUAL MST AFTERCOOLER SYSTEM MODEL

ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY

Fire Safety Hot Work Permit Policy/ Procedures

4 Machine maintenance and repair

HNP-021 Oil Purifier. Description. Specifications. Features. Contact Us:

Code AWC20HP Air Compressor

Power Supply Facilities Failure (Units 3-4 Temporary M/C (A), etc.) March 22, 2013 Tokyo Electric Power Company

TECHNICAL DATA MAINTENANCE AIR COMPRESSOR MODEL G-1

Manual Actuated Boiler Blowdown Valves

Bulletin Swimming pool, hot tub and spa installations Rules , , , , , and

Aquor House Hydrant V2

DEH Instructions. Three-Phase, Platform-Mounted Distribution Transformers

Rates of various Line materials and Labour charges used in cost sheets for general works

ATL R/V Atlantis AUXILIARY PLANT OPERATION APPENDIX OPERATING PROCEDURES

ECONORESS ELECTRONIC EPS & EPT - ENHANCED PRESSURISATION SET INSTALLATION OPERATION & MAINTENANCE DOCUMENTATION

The following is a walk-around that should be done on each day of use before starting the airboat.

C-Consequence, P Probability, R-Risk Rating Value Page 2 of 2

Vacuum Excavation in the vicinity of the Wellington Electricity Network

Self-supporting hot water high pressure cleaner on trailer Hudson 315

This training does not attempt to cover all safety regulations or precautions.

INTERPLANT STANDARD - STEEL INDUSTRY CODE OF PRACTICE FOR SELECTION, Corresponding IS does not exist

1. PARTS INTRODUCTION ELECTRICAL NOTES INSTALLATION 5/6. 5. START UP 6/7. 6. MAINTENANCE 7/8/9. 7. PRESSURE SWITCH ADJUSTMENTS 9/10.

Deep Well Submersible Pump Model MSU/MSUS

IDEAS FOR MATHS TRAILS

AIR COMPRESSOR OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: CHAMP 3 PART NO: LS0115

Long term stability tests of INO RPC prototypes

General No. 25 and D-25 Handy Operating Instructions

24 Litre Air Compressor

Trench Cable Rollers - Straight Pulling Application

D C P L OXYGEN / NITROGEN PLANT

23.1 Functions, Basic Configuration, and Interfaces

Spare parts list ( ) Spare parts list HDS 990

PressVal Pressurisation Units. Packaged Pressurisation Units with expansion vessels for heating systems.

Plumbing Products FLOOR DRAIN CLEANOUT GATE VALVE BALL VALVE.

24L AIR COMPRESSOR MODEL NO: TIGER 11/250 PART NO: OPERATION & MAINTENANCE INSTRUCTIONS LS01/13

T17 Scrubber PARTS & CONSUMABLES

Materials : Carbon steel ASTM A216 WCB

Water Mist Systems Inspection, Testing, and Maintenance of Water Mist Systems

Annex E(M) - Final inspection checklist - monowheel

50L BELT DRIVEN AIR COMPRESSOR

Electric and Natural Gas Safety Slide Show Presenter s Notes

Description. Chassis. Cabinet. Long chassis - Type: Dimensions (mm): 2700 x 1200 x 1678

100L AIR COMPRESSOR MODEL NO: TIGER 16/1010 PART NO: OPERATION & MAINTENANCE INSTRUCTIONS LS01/13

Airless-Spraying Equipment. SuperFinish31. Fully equipped. More power. Innovative QLS technology

Booster Pump PB4-60 Replacement Kits

Step-by-Step Planning Guide

Installation, Operation and Maintenance Instructions for Electronically Controlled Pressurisation Units

i) Filtration machine, measuring equipment and other related machinery

POP Safety Valve. POP Safety Valve INTRODUCTION DEFINITIONS

2/2- and 3/2-way Rocker Solenoid Valve - bistable (impulse) version

SC100V AIR COMPRESSOR

Product Sheet Spraymist Unit

: Electric Power Generation, Transmission, and Distribution. Region IV - OSHA

USER S INFORMATION MANUAL

HIRE EQUIPMENT LIST BREATHING AIR EQUIPMENT. Mobile Breathing Air Units

Innovative Pressure Testing Equipment

Distribution Transformer Instruction Manual

24L AIR COMPRESSOR MODEL NO: TIGER 8/260 PART NO:

Risk Assessment for: Fume cupboards

Written Closure Plan. Comanche Station - Active CCR Surface Impoundment Public Service Company of Colorado Denver, Colorado

-FRU FREEZE RESISTANT WATER VALVE COOLERS SYSTEM

$ Plan Review Fee when Permit Application is submitted HOT TUBS AND SPAS BUILDING PERMIT APPLICATION. COST: $80.

SPECIFICATION OF FIRE PROXIMITY SUIT

Arab Fertilizers Association Knowledge Sharing Template

Contractors' Code of Safe Practice

Parts Manual STRIKER Striker 2840 Parts List - PN Printed in USA 03/18/08

6-5 Maintenance Manual

MiniMag. 1 of 8. The MiniMag scrubber s 2 recover drain are 80% larger than a 1.5, making the MiniMag scrubber s drain hose less likely to clog.

24L OIL FREE AIR COMPRESSOR MODEL NO: TIGER 7/250 PART NO: OPERATION & MAINTENANCE INSTRUCTIONS LS10/13

Single-Phase Pad-Mounted Distribution. Single-Phase Pad-Mounted Distribution Transformers KVA

SHHH AIR COMPRESSOR Model Nos. SHHH5/24 - SHHH5/50 - SHHH7/100

KTM 50 (DN ) Installation, maintenance and operating instructions

Innovative Techniques for Mitigating Arc Flash Exposure

THE COMPACT LINE. Mobile power packs in convincing BAUER quality l/min 225 / 330 bar TOUGH RELIABLE WELL ESTABLISHED

OXYGEN and SYSTEM OXY

icon i150 / i350 Installation / Operation Manual

24L AIR COMPRESSOR OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: RANGER 7/240 PART NO: LS0913

ANNEX AMENDMENTS TO THE INTERNATIONAL CODE FOR FIRE SAFETY SYSTEMS (FSS CODE) CHAPTER 15 INERT GAS SYSTEMS

BOSS PULISCI PROVA IMPIANTI MEDIA

TECHNICAL DATA. Q = C v P S

Fluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS

market leading commercial and domestic ventilation with heat recovery Nilan VPM Active heat recovery and cooling (air/air)

GEN20AD-GEN20AL-GEN18AN

Budget Range Operators Handbook

INSTALLATION & OPERATING INSTRUCTIONS FOR THE DS300 BRAZING HEARTH FLAMEFAST (UK) LIMITED

Squeegee Unit for MRS Multi-Recovery System

SEries 29 Hydrant valves installation, operation & maintenance manual

Transcription:

Schedule of and for Annual Maintenance Contract for Electrical Jobs for the year 2017-18 (Section-F) Cleaning Jobs. 1.00 Cleaning of cable trenches of various sizes from 450 mm wide x 600 mm deep to 1000 mm wide x 1250 mm deep containing MS angle/support including cleaning, scraping rust from each arm of cable rack support and its other chambers, nuts and bolts etc. and then applying two coats of rust preventor and two coats of epoxy paints. 1.01 1.02 Removal of Heavy duty slab above 10 cm thick and placing them back on the cable trench. Removal of Light duty slab upto 10 cm. thick and placing them back on the cable trench. Nos 64 Nos 93 1.03 Cleaning and removal of rust from cable/cable racks and various arms, application of rust preventor and epoxy paint on all cable/cable racks. Mtr. 273 Dencote/ anti corrosive paint 1.04 1.05 1.06 Cleaning of cable trench of various width. Removal of rubbish containing ash, coal, fuel oil, accumulated water filled trenches, stacking and disposal of the same. The choked drain outlets of the cable trenches are also to be cleaned with water jets. Sealing of slab joints of cable trenches with premixed sand bitumen (250mg of bitumen of 80/100 grade is to be mixed with one cubic meter of river sand ). Surface dressing uprooting of small bushes along the cable trenches 30 cm wide from both side of the trench and disposed of rubbish at nearest available place. MTR 282 MTR 1000 Bitumen Compound MTR 338 Signature of Issuing Authority Page 1 of F Signature of the Contractor with seal

2.00 Cleaning of motors parts such as body, fan covers, foundation bed, radiator, push button station, site isolator etc. 2.01 2.02 From fractional H.P to 5HP/3 KW.(420 Nos. per round x 24 above 5 HP to 20 HP/15 KW(125 Nos. per round x 24 Nos 10080 Nos 3000 Min.288 No. mandays are 2.03 Above 20 HP to 40 HP/27 KW(150 Nos. per round x 24 Nos 3600 2.04 2.05 Above 40 HP to 200HP/149 KW(131 Nos. per round x 12 Above200HP/149 KW (84 Nos. per round x 12 Nos 1572 Nos 1008 Min.180 No. mandays are 3.00 Cleaning of power panels, lighting panels, lighting board, sub lighting distribution boards, small power or control panel etc. (106 Nos. per round x 12 Nos 1272 Polishing liquid or cream Min. 300 No. mandays are 4.00 CLEANING OF TRANSFORMERS. 4.01 6/10 MVA and 35 MVA (10 Nos. per round x 12 Nos 120 Min. 240 No. mandays are 4.02 4.03 1750 KVA, 2000 KVA and 2250 KVA (22 Nos. per round x 12 1250 KVA & 750 KVA (20 Nos. per round x 12 Nos 264 Nos 240 Min. 240 No. mandays are Min.108 No. mandays are 4.04 Small transformers below 750 KVA.(28 Nos. per round x 12 Nos 372 Min. 72 No. mandays are Signature of Issuing Authority Page 2 of F Signature of the Contractor with seal

5.00 Cleaning of substations/transformers rooms/bays. 5.01 Large sized substations including basement such as main substation /ammonia substation/sgp substation. (Surface area 2800 sq mm and above).(3 Nos. per round x 12 Nos 36 Min.240 No. mandays are 5.02 Medium substations such as coal handling substation,soot blower MCC rooms, Ammonia MCC 2, 5000 Te ammonia storage MCC, BFW MCC room, 4th boiler substation, HCN chromate, 10 MVA transformers bay, 1750 KVA transformer bays of unit group of plants and expansion plants, 1250 KVA sub-station, 750KVA sub-station, emergeny diesel gen. station.(surface area 600 sq mtrs.) (80 Nos. per round x 12 Nos 960 Min.360 No. mandays are 5.03 Small substations/transformer bays etc. such as fly wheel MG sets room / UPS rooms, battery rooms, filter rooms or any other small substation/transformer bay etc.(surface area below 600 sq m) (60 Nos. per round x 12 Nos 720 Min.240No. mandays are 6.00 Cleaning of cable racks and trays in carbon recovery /urea plant, SGP (around boilers1, 2 & 3), NOX plant, NLSP, Silo(CAN & Urea) & Bagging(CAN & Urea).The cable racks and trays laid horizontally are to be cleaned of dust, oil, coal dust mixture and cleaning with jute brush. 6.01 6.02 Cable trays/racks of size 15cm wide (3000 Metre per round x 4 Cable trays/racks of size 30 cm wide(3285 Metre per round x 4 MTR 12000 MTR 13140 Min.160 No. mandays are Signature of Issuing Authority Page 3 of F Signature of the Contractor with seal

6.03 Cable trays/racks of size 45cm wide(1300 Metre per round x 4 MTR 5200 Min.120 No. mandays are 6.04 Cable trays/racks of size 60 cm wide(3700 Metre per round x 4 MTR 14800 Min.432 No. mandays are 6.05 7.00 Cable trays/racks of size 100cm wide(3500 Metre per round x 4 MTR 14000 Uprooting /trimming /pruning trees coming up beneath over-head lines.uprooting of bushes around over-head lines,poles and substations. Min.320 No. mandays are 7.01 7.02 Trimming /pruning /uprooting of trees coming up beneth the over-head net work if any. (1250 No.per round x 6 Uprooting of bushes (small trees) grass and wild growth,surface dressing around 9 sq meters of each RCC/steel tubular poles and then disposal of rubbish at the nearest suitable place. (200 No.per round x 12 Nos 7500 Nos of poles 2400 Min.120 No. mandays are Min.240No. mandays are 7.03 Uprooting of bushes (small trees) grass and wild growth,surface dressing around 400 sq meters of each substation. (20 No.sub-station per round x 4 Sq meter 45000 Min.80 No. mandays are 7.04 Uprooting of wild growth/grass from the pebbels in the 66 KV Switch Yard, W.T. Plant and out sides of 66 KV Switch-Yard(6000 sq.mr. per round x 6. Sq meter 36000 Min.360 No. mandays are 8.00 Cleaning of Battry Bank (fortnightly) in different sections as per their Voltages mentioned below:- 8.01 24 V Battery Bank (7 nos. 24 V Banks per round x 24 round) Nos 168 Petroleum Jelly Signature of Issuing Authority Page 4 of F Signature of the Contractor with seal

8.02 8.03 8.04 8.05 9.00 48V/50 V Battery Bank (5 nos. Banks per round x 24 round) Nos 120 110 V Battery (6 nos. Banks per round x 24 round) Nos 144 220 V/240V Battery Bank (10 no Banks per round x 24 round) Nos 240 360 V Battery Bank (6 no Banks per round x 24 round) Nos 144 Cleaning of air filters of following sizes installed in the various substations for pressurisation equipments. It includes removal of filters, cleaning with water and pressurised air, refixing of filters after cleaning and drying, replacement of filters. Petroleum Jelly Min.288 No. mandays are Min.192 No. mandays are 9.01 9.02 9.03 10.00 Filter size upto 600 x 600 mm.( Upto 3600 Sq. mm.) (10 Nos. Filter per round x 12 round) Nos 120 Filter size upto 1000 x 500 mm.( Upto 500000 Sq. mm.) (6Nos. Filter per round x 12 round) Nos 72 Paper Filter Sets of Tranformer oil.this includes removing of filters from oil filteration set and refixing the same after cleaning.(6 Nos. Filter per round x 12 round) Cleaning of Surge counter / lightening arrestor/ Bushing / Insulators of T/ship & switchyard. Nos 72 Nos 600 Min.80 No. mandays are 11.00 Cleaning of gravels in transformer pits 35 MVA /10 MVA /1750 KVA/ 1250 KVA / 1000 KVA / 750 KVA (50 Nos. Transformer Pits) Nos 50 Min.500 No. mandays are TOTAL Signature of Issuing Authority Page 5 of F Signature of the Contractor with seal