CMA 4500 Series Optical Time Domain Reflectometer The CMA 4500 continues NetTest s tradition as the industry s premier OTDR solution designed with the high performance and scalability necessary to meet the stringent demands of telecommunications professionals, while simultaneously accelerating the deployment of new services and reducing the total cost of measurement. Specifications Standard Desktop Operating System Windows XPe Windows XP Pro with desktop option Data I/O (modular) CD-R/W (optional) CD-R/W (standard) 3.5".44 MB floppy drive (optional) 3.5".44 MB floppy drive (optional) Data I/O (fixed) Processor 0 GB hard drive minimum (standard) Ultra-low power 300 MHz NOTES: All specifications subject to change Although Windows is the platform operating system, it is not accessible unless the desktop model is ordered System Memory Display Control Interface 56 MB Touch screen, 6.4 cm (0.4") XGA LCD (04 x 768 pixel resolution) Touch screen, cursor control, dedicated hardkeys and status LEDs Standard I/O Ports USB (), Ethernet 0/00(), IrDA (), PS/ Mouse (), PS/ Keyboard () Dimensions (H x W x D) Weight 4. x 34.3 x 9.5 cm (9.5 x 3.5 x 3.75 inches) 5.4 kg ( lbs) includes battery Power Specifications AC Battery Battery Life Recharge Time Auto switching 9-3 VAC 47-63 Hz, 84-64 VAC 47-63 Hz Li-Ion - battery standard >3 hours <3 hours Environmental Specifications Operation Storage Temperature 0º to 45º C (3º to º F) -5º to 60º C (-3º to 40º F) Humidity 95% max, non-condensing 95% max, non-condensing Altitude 5,40 m (50,000 ft) 5,40 m (50,000 ft) Specifications
CMA 4500 Series OTDR Specifications - (Single Wavelength Available upon request) 5 35 45 54 30 nm ±0 nm 550 nm ±0 nm 30 nm ±0 nm 550 nm ±0 nm 30 nm ±0 nm 550 nm ±0 nm 550 nm ±0 nm 30 nm: <5 nm 550 nm: <5 nm 30 nm: <5 nm 550 nm: <5 nm 30 nm: <5 nm 550 nm: <5 nm 550 nm: <5 nm Dynamic Range 30 nm: 37 db 550 nm: 36 db 30 nm: 40 db 550 nm: 40 db 30 nm: 43 db 550 nm: 45 db 550 nm: 50 db Deadzone 30 nm: 4 m 550 nm: 3.5 m 30 nm: 4 m 550 nm: 3 m 30 nm: 5 m 550 nm: 5 m 550 nm: 5 m 30 nm: 9 m 550 nm: 9 m 30 nm: 8 m 550 nm: 6 m 30 nm: 0 m 550 nm: 0 m 550 nm: 0 m SNR= with up to 56k averages (typical, subtract approximately db of range to 98% peak noise. Bellcore TR-TSY-00096 Issue ) Using Bellcore TR-TSY-00096 Issue (typical) 3 Deadzones measured on -45 db reflections (typical) 4 Wavelength dependent 5 66 and 69 Distance Range is 5, 0, 50, 5 km 6 66 and 69 Distance Sampling is 0.5, 0.5, 0.5,,, 4, 8 m Pulsewidth Dynamic Range Deadzone 5 ns to 0 µs 36 30 nm ±0 nm 550 nm ±0 nm 65 nm ±5 nm 30 nm: <5 nm 550 nm: <5 nm 65 nm: <5 nm 30 nm: 40 db 550 nm: 40 db 65 nm: 40 db 30 nm: 4 m 550 nm: 3 m 65 nm: 3 m 30 nm: 8 m 550 nm: 6 m 65 nm: 6 m 5 ns to 0 µs 46 30 nm ±0 nm 550 nm ±0 nm 65 nm ±5 nm 30 nm: <5 nm 550 nm: <5 nm 65 nm: <5 nm 30 nm: 43 db 550 nm: 45 db 65 nm: 43 db 30 nm: 6 m 550 nm: 5 m 65 nm: 5 m 30 nm: 0 m 550 nm: 0 m 65 nm: 0 m 66 Multimode (6.5 µm) 300 nm ±30 nm 850 nm: <5 nm 300 nm: <5 nm 850 nm: 4 db 300 nm: 6 db 850 nm:.5 m 300 nm:.5 m 300 nm: 7 m 69 Multimode (50 µm) 300 nm ±30 nm 850 nm: <5 nm 300 nm: <5 nm 850 nm: 4 db 300 nm: 6 db 850 nm: 3 m 300 nm: 3 m 300 nm: 7 m Pulsewidth 4 5 ns to 0 µs 5 ns to µs 5 ns to µs Distance Resolution 0.000 km, 0. m, ft, 0.000 mi Distance Range Setting 4, 5 5, 0, 50, 5, 50, 300 km Loss Resolution 0.00 db Distance Sampling 4, 6 (Range Dependent) 0.5, 0.5, 0.5,,, 4, 8, 6 m Data Points Up to 56,000 Distance Accuracy Laser Safety 0.005% of distance measurement ± distance resolution ± index uncertainty Meets IEC6085- Class I and CDRH Class Requirements (Eye Safe) CFR 040 Universal (Uses UC-30-XX adapters) Page of 5 CMA 4500 OTDR Specification
CMA 4500 Series OTDR Specifications Dynamic Range Deadzone 6 30 nm ±0 nm 550 nm ±0 nm 30 nm: <5 nm 550 nm: <5 nm 30 nm: 35 db 550 nm: 35 db 30 nm: 5 m 550 nm: 5 m 30 nm: 0 m 550 nm: 0 m Multimode (6.5µm) 300 nm ±30 nm 850 nm: <5 nm 300 nm: <5 nm 850 nm: 4 db 300 nm: 6 db 300 nm: 5 m 850 nm: 7 m 300 nm: 8.5 m SNR= with up to 56k averages (typical, subtract approximately db of range to 98% peak noise. Bellcore TR-TSY-00096 Issue ) Using Bellcore TR-TSY-00096 Issue (typical) 3 Deadzones measured on -45 db reflections (typical) 4 Wavelength dependent 5 66 and 69 Distance Range is 5, 0, 50, 5 km Pulsewidth Distance Resolution Distance Range Setting 4, 5 Loss Resolution Distance Sampling 4, 6 (Range Dependent) 0.000 km, 0. m, ft, 0.000 mi 5, 0, 50, 5, 50, 300 km 0.00 db Data Points Up to 56,000 Distance Accuracy Laser Safety 5 ns to 0 µs 0.5, 0.5, 0.5,,, 4, 8, 6 m 0.005% of distance measurement ± distance resolution ± index uncertainty Meets IEC6085- Class I and CDRH Class Requirements (Eye Safe) CFR 040 Universal (Uses UC-30-XX adapters) 5 ns to µs 6 66 and 69 Distance Sampling is 0.5, 0.5, 0.5,,, 4, 8 m CMA 4500 OTDR Specification Page 3 of 5
Light Source (optional - factory installed) Multimode Type Laser LED Wavelengths Same as corresponding 850/300 nm ± 0 nm OTDR module Output -8 dbm (min.) -5 dbm (min.) Output Fiber 9/5 µm single-mode fiber 6.5 or 50 µm multimode Universal Universal (uses UC-30-XX adapters) (uses UC-30-XX adapters) Modes of Operation CW, KHz and KHz CW, KHz and KHz Stability ±0. db (8 hours) ±0. db (8 hours) <5 nm <50/<5 FWHM Safety Meets IEC6085- Class I and CDRH Class Requirements (Eye Safe) CFR 040 Power Meter (optional - factory installed) Detector Type Wavelength Range InGaAs 780-800 nm At 3º C 4500-6 quad singlemode and multi-mode only features a singlemode light source Range Calibrated Wavelengths Resolution Store Reference Mode Accuracy +0 to -45 dbm 850, 300, 30, 550, 65 nm Universal (uses LP-XX adapter caps) 0.0 db, 0.0% Watts Yes ±4% @ +5 dbm to -50 dbm ±8% @ +0 dbm to -5 dbm, -50 dbm to -55 dbm ±0.0 db, +5 dbm to -55 dbm Visual Fault Locator (optional - factory installed) Wavelength 650 nm ±0 nm Output (max) 0 dbm into 9/5 µm Transmission Mode Output Fiber CW or Hz 9/5 µm, SM fiber.5 mm Universal Safety IEC 6085- Class II, FDA ( CFR 040. 0 Class ) CMA 4500 OTDR Specification Page 4 of 5
Standard Accessories Color display with touch screen, operator's manual, support CD, Li-Ion battery (), AC charger/adapter, 0/00 MB Ethernet Port, and choice of AC line cord. Optical Accessories NOTES: Must be added as a separate line item Option-50CD-RW Option-50FLOPPY Option-507KEYUS 4500-BATT Option-5AC Option-55PRINT 4500-MANUAL 4500-HARDCASE 4500-SOFTCASE 4500-USBKEY 4500-USBFLOPPY 4500-USBCDRW 4500-EXT 4500-EXT 4500-AUTO CMA 4500/5000 internal CD/read/write module CMA 4500/5000 internal floppy drive module CMA 4500/5000 US keyboard Replacement Li-Ion battery Replacement AC charger/adapter CMA 4500/5000 portable external printer with cable and case Replacement operator s manual CMA 4500 hard transit case CMA 4500 soft transit case USB keyboard with trackball USB external floppy drive USB external CD-R/W CMA 4500 Year extended warranty CMA 4500 Year extended warranty Cigarette lighter charger/adapter AC Power Cord Options OPTION-570LINEUS US/Japan AC line cord OPTION-570LINESW Switzerland AC line cord OPTION-570LINEEU Europe AC line cord OPTION-570LINEIT Italy AC line cord OPTION-570LINEUK United Kingdom AC line cord Option for use with CMA 4500 Desktop only OPTION-570LINEAU Australia AC line cord Option-580DATA USB data transfer kit, includes software and cable for Windows 98/000/XP NetTest A/S Kirkebjerg Allé 90 DK-605 Brøndby Denmark Tel: +45 7 3 00 Fax: +45 7 3 50 E-mail: nordic@nettest.com USB Video Inspection Probe (see VIP Application datasheet for additional information) The CMA 4500/5000 video inspection probe features a 00X/400X user selectable probe that allows fiber optic connectors to be viewed, stored and analyzed (with option 546) through the CMA 4500 USB port. Option-545VIP Option-546VIPA NetTest Sales Offices China +86 0 6467 9888 Denmark +45 7 00 France +33 64 53 64 00 Germany +49 89 99 89 0-0 USB probe with basic viewing/image capture software, FC, SC, ST,.5 mm and.5 mm tips USB probe with basic viewing/image capture/advanced analysis software, hard case, FC, SC, ST,.5 mm and.5 mm tips (USB feature key) Italy +39 06 43 36 4 00 Singapore +65 60 9575 Spain +34 9 37 9 7 USA + 35 66 5000 NetTest develops and markets operational support solutions that provide unique insights into the function and performance of telecommunication networks so that owners, operators, and vendors can make informed business decisions that drive their profitability. ISO 900:000 certified. CMA 4500 OTDR Spec Sheets - A4 Rev. C 004 NetTest All Rights Reserved. Specifications subject to.