MATERIAL SAFETY DATA SHEET 1. Product and Company Identification Material name Version # 03 Revision date Chemical description CAS # Manufacturer information 2. Hazards Identification CETSEAL 05-October-2012 Silyl terminated polyether Mixture CETCO Building Materials Group 2870 Forbs Avenue Hoffman Estates, IL 60192 United States safety.data@amcol.com http://www.cetco.com/ General Information (800) 527-9948 CHEMTREC (800) 424-9300 Potential health effects Routes of exposure Eyes Skin Inhalation Ingestion Eye contact. Skin contact. Avoid contact with eyes. May irritate eyes. Prolonged and/or repeated skin contact may result in mild irritation or redness. Do not breathe dust. Inhalation of dusts produced during cutting, grinding or sanding of this product may cause irritation of the respiratory tract. Health injuries are not known or expected under normal use. Do not ingest. May cause irritation of the gastrointestinal tract. 3. Composition / Information on Ingredients The manufacturer lists no ingredients as hazardous according to OSHA 29 CFR 1910.1200. Composition comments This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA. 4. First Aid Measures First aid procedures Eye contact Skin contact Inhalation Ingestion tes to physician General advice Immediately flush eyes with plenty of water for at least 20 minutes. Get medical attention if irritation develops or persists. Wash off with soap and water. Get medical attention if irritation develops or persists. If symptoms are experienced, remove source of contamination or move victim to fresh air. Call a physician if symptoms develop or persist. If material is ingested, immediately contact a physician or poison control center. Provide general supportive measures and treat symptomatically. If you feel unwell, seek medical advice (show the label where possible). 5. Fire Fighting Measures Flammable properties Extinguishing media Suitable extinguishing media Protection of firefighters Protective equipment and precautions for firefighters Fire fighting equipment/instructions The product is not flammable. Use any media suitable for the surrounding fires. As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. Move containers from fire area if you can do it without risk. 1 / 5
6. Accidental Release Measures Personal precautions Environmental precautions Methods for containment Methods for cleaning up 7. Handling and Storage Handling Storage Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Do not flush into surface water or sanitary sewer system. Stop leak if you can do so without risk. 8. Exposure Controls / Personal Protection Occupational exposure limits US. ACGIH Threshold Limit s Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal. Clean contaminated surface thoroughly. Do not get this material in your eyes, on your skin, or on your clothing. Wash hands after handling and before eating. Keep containers tightly closed in a dry, cool and well-ventilated place. Never allow product to get in contact with water during storage. Keep out of the reach of children. TWA US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) US. OSHA Table Z-3 (29 CFR 1910.1000) Engineering controls Personal protective equipment Eye / face protection Skin protection Respiratory protection General hygiene considerations 9. Physical & Chemical Properties Appearance Physical state Color Odor Odor threshold ph Vapor pressure PEL TWA 3 mg/m3 Respirable particles. 10 mg/m3 Inhalable particles. 5 mg/m3 Respirable fraction. 15 mg/m3 Total dust. Good general ventilation should be sufficient to control airborne levels. Wear safety glasses; chemical goggles (if splashing is possible). 5 mg/m3 Respirable fraction. 15 mg/m3 Total dust. 50 mppcf Total dust. 15 mppcf Respirable fraction. Wear appropriate chemical resistant gloves. Use of protective coveralls and long sleeves is recommended. personal respiratory protective equipment normally required. Use good industrial hygiene practices in handling this material. Wash hands before breaks and immediately after handling the product. Paste. Solid. Grey. Ester-like. Vapor density > 1 air = 1 Boiling point Melting point/freezing point Solubility (water) 2 / 5
Specific gravity Relative density Flash point Flammability limits in air, upper, % by volume Flammability limits in air, lower, % by volume Auto-ignition temperature Viscosity Percent volatile Other data Density 800000 cp 0 % estimated 13.35 lb/gal 10. Chemical Stability & Reactivity Information Chemical stability Conditions to avoid Incompatible materials Hazardous decomposition products Possibility of hazardous reactions Stable at normal conditions. hazards to be especially mentioned. Exposure to moisture. Polymerization can occur. ne known. At thermal decomposition temperatures, carbon monoxide and carbon dioxide. Will not occur. 11. Toxicological Information Local effects Carcinogenicity Mutagenicity Teratogenicity Prolonged and/or repeated skin contact may result in mild irritation or redness. This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA. data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic. data available to indicate product or any components present at greater than 0.1% may cause birth defects. 12. Ecological Information Ecotoxicity Environmental effects Persistence and degradability data is available on the product itself. This product is not expected to produce significant ecotoxicity upon exposure to aquatic organisms and aquatic systems. data available for this product. Based on the physical properties of this product, significant environmental persistence and bioaccumulation would not be expected. 13. Disposal Considerations Disposal instructions Dispose in accordance with all applicable regulations. 14. Transport Information DOT IATA IMDG 15. Regulatory Information US federal regulations OSHA Process Safety Standard: This material is not known to be hazardous by the OSHA Highly Hazardous Process Safety Standard, 29 CFR 1910.119. Drug Enforcement Administration (DEA). List 2, Essential Chemicals (21 CFR 1310.02(b) and 1310.04(f)(2) DEA Essential Chemical Code Number 3 / 5
Drug Enforcement Administration (DEA). List 1 & 2 Exempt Chemical Mixtures (21 CFR 1310.12(c)) DEA Exempt Chemical Mixtures Code Number CERCLA (Superfund) reportable quantity ne Superfund Amendments and Reauthorization Act of 1986 (SARA) Hazard categories Section 302 extremely hazardous substance Section 311 hazardous chemical Inventory status Immediate Hazard - Delayed Hazard - Fire Hazard - Pressure Hazard - Reactivity Hazard - Country(s) or region Inventory name On inventory (yes/no)* Australia Australian Inventory of Chemical Substances (AICS) Canada Canada China Europe Europe Japan Korea New Zealand Philippines United States & Puerto Rico Domestic Substances List (DSL) n-domestic Substances List (NDSL) Inventory of Existing Chemical Substances in China (IECSC) European Inventory of Existing Commercial Chemical Substances (EINECS) European List of tified Chemical Substances (ELINCS) Inventory of Existing and New Chemical Substances (ENCS) Existing Chemicals List (ECL) New Zealand Inventory Philippine Inventory of Chemicals and Chemical Substances (PICCS) *A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) State regulations 16. Other Information Further information HMIS ratings Health: 0 Flammability: 0 Physical hazard: 0 NFPA ratings Health: 0 Flammability: 0 Instability: 0 Disclaimer Toxic Substances Control Act (TSCA) Inventory This product does not contain a chemical known to the State of California to cause cancer, birth defects or other reproductive harm. This safety datasheet only contains information relating to safety and does not replace any product information or product specification. The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The manufacturer expressly does not make any representations, warranties, or guarantees as to its accuracy, reliability or completeness nor assumes any liability, for its use. It is the user's responsibility to verify the suitability and completeness of such information for each particular use. Third party materials: Insofar as materials not manufactured or supplied by this manufacturer are used in conjunction with, or instead of this product, it is the responsibility of the customer to obtain, from the manufacturer or supplier, all technical data and other properties relating to these and other materials and to obtain all necessary information relating to them. liability can be accepted in respect of the use of this product in conjunction with materials from another supplier. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. Yes 4 / 5
Issue date This data sheet contains changes from the previous version in section(s): 05-February-2009 Hazards Identification: Eyes Hazards Identification: Skin Hazards Identification: Inhalation Hazards Identification: Ingestion Fire Fighting Measures: Suitable extinguishing media Fire Fighting Measures: Fire fighting equipment/instructions Toxicological Information: Local effects 5 / 5