Safe Work Method Statement. Hook up and Towing - Risk Assessment

Similar documents
Safe Work Method Statement. Set up and Use - Risk Assessment

Safe Work Method Statement

WH&S Act 2011 & Regulations 2011, Environmental Protection Act and Regulations

SAFE WORK METHOD STATEMENT SWMS No Version

SAFE WORK METHOD STATEMENT

SAFE WORK METHOD STATEMENT

Potable Water Truck Safe Work Procedure PTES_HSE_SWP_041. Name Date Signature. Author Geoff Selfe 25/01/2016. Reviewed Solomon Site 25/01/

The Sample Company Pty Ltd

Job Safety and Environmental Analysis (JSEA)/Safe Work Method Statement (SWMS)

WORK METHOD STATEMENT STRUCTURAL STEEL

SAFE WORK METHOD STATEMENT (SWMS) GENERAL GARDENING with Blowers, Hedge Trimmers, Whipper Snippers, Pruners, Spray Units

SAFE WORK METHOD STATEMENT Part B

Safe Work Method Statement (SWMS)

Safe Work Method Statement LRB TREE SERVICES 6 Behland St, Kearneys Spring QLD, 4350 ABN

MONTHLY SAFETY NEWSLETTER

Safe Work Method Statements (SWMS)

How severely could the risk hurt someone? Low/Insignificant First aid

Safe Work Method Statement Tasks

SAFE WORK METHOD STATEMENT CARPENTER

RulesforLaborers,Oilers, andtheplacingcrew VERSION7.0.1

ACCREDITED SAFETY TRAINING FOR EQUIPMENT OPERATORS

SAFE WORK METHOD STATEMENT

Work Activity (e.g. Road Work): Work Location:.

SAFE WORK METHOD STATEMENT

SAFE WORK METHOD STATEMENT

SWMS No 012 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 6

SAFE WORK METHOD STATEMENT WORKING IN CONFINED SPACE HSE NET NAT SWMS APAND00030

JUNE 2018 VOL.06 MONTHLY HEALTH & SAFETY NEWSLETTER

Safe Work Method Statement

Safe Work Method Statement

SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt, GEEBUNG PH M ABN

Hazard & Risk Management

Plant Hazard Identification and Risk Assessment

Staff Contractors. Public. Staff Contractors

SAFE WORK METHOD STATEMENT (SWMS)

Buchanan. Approved: John Downes

Pewsey Carnival Event

CONTRACTOR SAFETY RULES

WORK METHOD STATEMENT CARPET LAYING

Charmborough Bells Risk Assessment and Method Statement

Hazard Identification and Risk Assessment Form. Risk Assessment

Bogo Operations Pollution Incident Response Management Plan

Wheeler Cranes 6 McIntyre Rd Tomago NSW 2324

2 Man Cruiser Rules. 1. Car must be stock. OEM parts only. 2. Remove all exterior trim and moldings.

SAFE WORK METHOD STATEMENT (SWMS) All Trades Abseiling ABN: Ph:

THE CONTROLLED COPY OF THIS DOCUMENT IS ON THE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR THE DATE AT THE BOTTOM OF THE PAGE.

Method Statement Author

SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt St, GEEBUNG QLD 4031 ph ABN:

Operation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039. Name Date Signature. Author Jarred Hearle 27/11/2015

SEMPEO SQA Unit Code H2CB 04 Preparing and Manoeuvring Armoured Fighting Vehicles (AFVs) for Maintenance and Transportation

IMMANUEL CHURCH, CHICHESTER HEALTH AND SAFETY POLICY

WORK METHOD STATEMENT TERMITE PROTECTION

SWMS documented by: Feb Bo Ceprnja Date Feb Feb Feb 2018

SAFETY MANAGEMENT SYSTEM

How severely could the risk hurt someone?

Pre-control risk estimate. Likelihood Risk

Darling Downs Soaring Club Inc

Accident/Incident Reporting and Investigation Procedures

Work Activity (e.g. Road Work): Work Location:.

MEWP - Boom Note: It is recommended that you read the Supporting Information page before you read this factsheet.

WORK METHOD STATEMENT ALUMINIUM WINDOWS AND DOORS

Appendix 4C - Sample SWMS Trenching

SWMS No 001 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 5

High visibility jacket/tabard to be worn by all staff working on site and on the yard.

SH&EWMS No.: F-C-QLD-10 Revision Date: July 2018 Revision Due: July 2019

Faculty/School: Pharmacy Initial Issue Date: Oct 2016

1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT

UK Contractors Group Mobile Elevating Work Platforms Good Practice Toolkit June June 2015 Page 1 of 16

FLYING OBJECTS MANUAL HANDLING EXCESSIVE NOISE

SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt St, GEEBUNG QLD 4031 ph ABN:

How severely could the risk hurt someone? Low/Insignificant First aid

Wheeler Cranes 6 McIntyre Rd Tomago NSW 2324

Safe Work Method Statement

WORK HEALTH SAFETY MANAGEMENT SYSTEM First Aid Policy & Procedure WHS2200

Safety Guidelines for Live Entertainment and Events I Part 2. Hazard Identification and Risk Management 1

SAFE WORK METHOD STATEMENT Part 1

Safe Work Method Statement

LEARNER GUIDE. Trencher TS. PO Box 2026 Mountain Gate VIC 3156 p: ABN: RTO: 21396

The Sample Company Pty Ltd

PLANT RISK ASSESSMENT REPORT

Original Date of Issue: 04/09

PRO Lifting Operations

Safe Work Method Statement (SWMS) Worksheet

How severely could the risk hurt someone? Low/Insignificant First aid

Hazards Requiring Attention: AS AT Friday, 29 January Next Review Saturday, 28 January Total Hazards Recorded 39. Critical Risk Hazards 0

Hazard Identification and Risk Assessment Form. Risk Assessment

Note: You will need a full tank of CO2 for connection and leak testing! Kit Number

Specialists Window Cleaning Induction

SAFE WORK METHODS STATEMENT (SWMS) & ON-SITE JSEA

LPG SAFETY INFORMATION. Kwik-Gas. Safety Manual. Less talk more energy

JOB SAFETY ENVIRONMENT ANALYSIS (JSEA) Working With In Situ Testing Rigs

GAP Tool Box Talk: Quick Hitches

SAFETY MANAGEMENT SYSTEM

PLANT RISK ASSESSMENT REPORT

JACKHAMMER SAFETY TRAINING

Management of risk. Definition of terms. Managing risks. Risk

TOPLINE ELECTRONICS LTD CO2 CONTROL UNIT MANUAL

SH&EWMS No: F-C-QLD-23 Revision Date: July 2018 Revision Due: July Brief Description of Work Activity: Use Petrol Hand Saw / Ring Saw

CONSTRUCTION HEALTH AND SAFETY MANAGEMENT SYSTEM BASELINE HIRA

PPE and Tools PPE and Tools

Transcription:

Hook up and Towing - Risk Assessment

WORK STRUCTURES ABN: 97142401501 Work Activity/ Task: Hook up & Towing Caravan Address: 4 KAMHOLTZ CRT ASHMORE 4214 QLD Phone: 0404600001 Email: sales@caravans-australia.com.au Approved by: Glen Lawton Prepared by: Signature: TIM HADLEY: 0418 181 095 Monitor and Review: Weekly Date: September 5, 2011 Procedure (in steps) Hazards and Risks Initial Risk Residual Risk Control Measures L C R L C R Person Responsible 1)Before Delivery Pre Pick up 2) Gas Bottles & Generator turned off at fuel tap. 3) Waste water Hold is empty & hoses are disconnected 4) Main Pressure hose is disconnected 5) Annexe, Poles, Ropes & pegs are stowed & secure 6) All Internal loose items are secured 7) All external doors, windows & generator hatch are shut & secured. Delivery drivers not inducted and/or do not have appropriate Vehicle or Knowledge of towing Caravan. Vehicle does not meet towing capacity Explosion / Fire Contact with Waste water, slight water pressure in hoses Splashed with water under pressure Falling objects, trip points Damage to Caravan & items Pinch points on hands 1 2 2 2 2 3 Ensure all delivery drivers report to the office for a site specific induction, all drivers to must have towing knowledge for Caravan Ensure operator reads & understand the Operational Handbook Towing Vehicle must have appropriate rated capacity to safely manoeuvre the caravan Gas bottle must be turned off & hoses disconnected Generator must be turned off & fuel hose shut off (if appropriate) 3 3 5 Appropriate rubber gloves & Safety eye wear should be applied 3 3 5 Appropriate gloves for the task, Take care and aim hose down whilst disconnecting 3 3 5 Ensure annexe is safely secured in position, Ropes & Pegs are to be picked up when not in used & stored appropriately 3 3 5 Ensure all internal items are secured in place & evenly distributed to minimise weight difference issues (tipping) 2 3 4 Appropriate gloves for the task, Take care when shutting doors, windows & hatches. 4 3 6 Owner, Operator & Worker 4 3 6 Owner, Operator & Worker SWMS: Hooking up & Towing Caravan 1 of 5

Procedure (in steps) Hazards and Risks Initial Risk Residual Risk Control Measures L C R L C R Person Responsible 8) Check tyre pressure & conditions 9) Check wheel nuts are secured 10) Hitch Caravan to Towing Vehicle, Check safety catch is operating 11) Release van s hand break & remove chocks from wheels 12) Raise Jockey Wheel 13) Plug power from Tow Vehicle to Caravan (check all lights) 14) Attach Safety Chain & Break away cable 15) Check controls on Breaks 16) Fit & Adjust towing mirrors 17} Raise & secure steps & stabilisers on Caravan 18) Check under Caravan for all obstacles 19) Drive off, ensuring exclusion zone around caravan Blow out of tyres Cuts/nicks to hands Pinch Point / Crush injury to hands Manual Handling issues Pinch Point to hands Small electric shock 2 2 3 Ensure tyres are inflated to appropriate levels as per the manufactures guidelines & to suit the conditions of the road 2 2 3 Appropriate gloves for the task 3 2 4 Appropriate gloves for the task. Take care when placing towing coupling on to tow ball. 3 3 5 Appropriate gloves for the task, Ensure you understand manual handling issues, do not over exert your self 3 2 4 Appropriate gloves for the task 2 2 3 Ensure the plug is in good condition with no exposed wires, Ensure the plug is dry, Wear appropriate gloves Manual Handling Issues 3 3 5 Ensure you understand manual handling issues, do not over exert your self Manual Handling Issues 3 3 5 Ensure you understand manual handling issues, do not over exert your self Manual Handling Issues 3 3 5 Appropriate gloves for the task, Ensure you understand manual handling issues, do not over exert your self Manual handling Issues Manual handling Issues Contact with plant, Equipment, People, Environment 3 3 5 Appropriate gloves for the task, Ensure you understand manual handling issues, do not over exert your self 3 3 5 1 1 1 Remove any obstacles where practicable. Ensure you understand manual handling issues, do not over exert your self Ensure exclusion zone is in place around Caravan & Towing vehicle. Check all mirrors before moving. If necessary use a spotter to ensure no contact with Equipment, People or Environment 4 2 5 Owner, Operator & Worker 4 3 6 Owner, Operator & Worker 3 4 6 Owner, Operator & Worker 4 3 6 Owner, Operator & Worker SWMS: Hooking up & Towing Caravan 2 of 5

References: QLD WH&S ACT 1995. QLD WH&S Regulations 2008, Plant Code of Practice 2005. Risk Management Code of Practice 2007, Hazardous Substance Advisory Standard 2003. Qualifications: Appropriate Vehicle Licence Hazardous Substances Required: Diesel Fuel for Generator Special Precautions/ Environmental: Mobile phones should not be used by whilst performing these tasks. Hi-Vis shirts / vests, steel caps shoes & gloves are advisory only. Plant/ Equipment: Towing Vehicle & Work Structures Caravan Training: Induction into Caravan and equipment is advised. SWMS SIGN OFF SHEET We confirm that this has been explained to us and that we understand its contents. We also confirm that we understand that its purpose is to reduce, as far as possible, the chance of an incident or an accident occurring. Name Signature Date Must be completed SWMS: Hooking up & Towing Caravan 3 of 5

RISK SCORE CALCULATOR Likelihood? How often could it happen? Consequences? How severely could it hurt some one (C1)EXTREME! Death, permanent Disablement (C2)MAJOR! Hospital (C3)MODERATE! Doctor (C4)MINOR! First aid only no time lost (L1) VERY LIKELY? Daily 1 2 3 4 (L2)LIKELY? Monthly 2 3 4 5 (L3)UNLIKELY? 6 Monthly 3 4 5 6 (L4)VERYUNLIKELY? Yearly 4 5 6 7 SCORE ACTION 1 or 2 Do something about these risks immediately 3, 4 or 5 Do something about these risks A.S.A.P 6 or 7 These risks may not need immediate action COMMENTS SWMS: Hooking up & Towing Caravan 4 of 5

TOOLBOX TALK / RECORD OF CONSULTATION Subject Hooking Up & Towing of Caravan Print Name Date: Persons Present Signature Comments & points raised, input from employees: SWMS: Hooking up & Towing Caravan 5 of 5