PARTS MANUAL Invacare UK Ltd. Pencoed Technology Park Pencoed Bridgend CF35 5HZ Tel: 05 Fax: 05 0 E Mail: ordersuk@invacare.com Invacare Ireland Unit 5, Seatown Business Campus Seatown Road Swords County Dublin Ireland Tel: + 353 00 Fax: + 353 005 E Mail: ireland@invacare.com Web: www.invacare.ie 000
TABLE OF CONTENTS Accessories. Axles & Axle Components. 3 Anti-Tip Levers. Armrests 5- Flip Back & Locking 5 Adjustable Height. Adjustable Height Paediatric.. Backrests, Push Handles & Stroller Handles.. Caster Components. 9- Caster Forks. 9 Caster Components Mounting. 0 Caster Wheels. Footrests, Footplates. - Composite. Flip Up. 3 Footrests, Footboard Removable... Frame Components. 5-9 Frame Assemblies Base 5 Frame Assembly Seat / Tilt, Std.. Frame Growth Kits. Frame Assembly Gas Spring, X-Wide... Frame Assemblies - Tilt. 9 Front Rigging. 0- Pop-Up Hangers. 0 Pop-up Elevating Legrest.. Wheel Locks. Wheel Assemblies & Options. 3
Warranty Terms & Conditions Terms & Conditions Standard INVACARE Terms This is to certify that your product is warranted by INVACARE Ltd. for a period of year for parts and 5 years for frames.. Only INVACARE products purchased at full price are warranted against defective workmanship and materials.. If a defect or fault is discovered the INVACARE representative from whom the product was obtained should be notified immediately. 3. The manufacturer will not accept responsibility for damage caused by misuse or non-observance of the instructions set out in the user manual.. During the period of the warranty any parts that have become defective, due to faulty workmanship or materials, will be renewed or repaired without charge by the INVACARE representative. 5. The warranty will be forfeited should any unauthorised alteration be made to the equipment.. The purchaser s statutory rights under the Consumer Protection Act are not affected. Limitation Of Liability This warranty does not extend to the consequential costs from fault clearance, in particular freight and travel costs, loss of earnings, expenses, etc. Natural wear and tear. Inappropriate or incorrect use. Defective assembly or setting-up by the purchaser or third parties. Defective or neglectful treatment. Use of unsuitable spares.
ACCESSORIES 3 Protects and Pads Chair Frame (Velcro Attachment) 5 9 0 FBP Back Pack ea. 00 Canopy Fabric ea. FMNP Medical Necessities Bag ea. 03 Canopy Fabric/Visor ea. 3 090 Seat Pan Fixed ea. 0 Canopy Fabric/Visor, Frame & Clamps 0909 Seat Pan Quick Release ea 9 05 Canopy Frame/Clamps ea. 09- Frame Pads pr. 0 0 Canopy Hardware ea. 5 0 Canopy Fabric/Frame & Clamps ea. 0 Canopy Frame ea.. ea.
AXLE COMPONENTS 5 9 3 9 No. Part # Description Qty 005 Axle Plate ea. 00 Axle Plate Spacer ea. 3 003 Double Lock Axle Receiver ea. 999A Axle Spacer ea. 5 00 Quick Release Axle ea. 905 Screw, /-0 X -/ Flat Head pr. 90 Locknut, /-0 Nylon ea. 90 Washer, / Flat ea. 9 909 Jam Nut, 3/- Hex ea. 3
ANTI-TIP ASSEMBLIES Flip Up 0 3 9 5 3 0 3 3 000-L Anti-Tip Assembly Complete, Lt ea. 5 003 Anti-Tip Lever Tube ea. 000-R Anti-Tip Assembly Complete, Rt ea. 00 Anti-Tip Extension ea. 000- Anti-Tip Assembly Complete pr. 00 Dual Snap Button ea. 00-L Anti-Tip Tube Assembly Left ea. 9009A Roller ea. 00-R Anti-Tip Tube Assembly Right ea. 9 3099 Tube Plug, 3/ ea. 00- Anti-Tip Tube Assembly pr. 0 903 Screw, /-0 X -/ Button Hd ea. 3 00-L Anti-Tip Roller Assembly Left ea. 903 Screw, /-0 X Hex Head ea. 00-R Anti-Tip Roller Assembly Right ea. 903 Locknut, /-0 Nylon Thin ea. 00- Anti-Tip Roller Assembly pr. 3 90 Washer, / Flat ea. 00 Anti-Tip Housing Assembly ea. 900 Washer, / Nylon ea.
ARMRESTS Flip Back 0 9 3 5 FLIP BACK Full length pad (09) not available on 3 long arms LOCKING FLIP BACK 0-L Flip Back Armrest Assy, Lt ea. 50 Foam Pad 9 / ea. 0-R Flip Back Armrest Assy, Rt ea. 9005 Plastic Saddle, for 5/ Screw ea. 0- Flip Back Armrest Assemblies pr. 9 00-L Adjustment Plate Left ea. 0-PL Flip Back Armrest Assy 3, Lt ea. 00-R Adjustment Plate Right ea. 0-PR Flip Back Armrest Assy 3 - Rt ea. 00- Adjustment Plates Right & Left pr. 0-P- Flip Back Armrest Assemblies 3 pr. 0 9000 Tube Plug, ea. 05-L Locking Armrest Assy, Lt ea. 90 Screw, /-0 x / Hex Head ea. 05-R Locking Armrest Assy, Rt ea. 90 Screw, /-0 x 3/ Hex Head ea. 05- Locking Armrest Assemblies pr. 3 903 Screw, /-0 x Hex Head ea. 05-PL Locking Armrest Assy 3, Lt ea. 90 Screw, /-0 x 3/ Hex Head ea. 05-PR Locking Armrest Assy 3, Rt ea. 5 905 Screw, /-0 x Flat Head ea. 05-P Locking Armrest Assemblies 3 pr. 90 Locknut, /-0 Nylon ea. 3 0 Flip Back Tube (no hardware) - ea. 903 Locknut, /-0 Nylon Thin ea. 0-P Flip Back Tube (no hardware) - 3 ea. 90 Washer, / Flat ea. 05 Locking Arm Tube Assembly ea. 9 905 Washer, / Flat Thin ea. 05-P Locking Arm Tube Assembly 3 ea. 0 909 Washer, 5/ Flat ea. 5 0 Flip Back Armrest Barrel ea. 093 Desk Length Arm Pad 9 / Lg ea. 0 Mounting Plate ea. 09 Full Length Arm Pad 3 / Lg ea. 50 Foam Pad / ea. 5
ARMRESTS Adjustable Height 3 9 5 0a/ 3 0 5 9 STANDARD SEAT WIDTH REQUIRES ()INNER CLAMP (ITEM 5) AND USES -/ LONG MOUNTING SCREW (ITEM 0a) EXTENDED SEAT WIDTH REQUIRES () INNER CLAMPS AS SHOWN AND USES -/ LONG MOUNTING SCREWS (ITEM 0b) 05-L T-Arm Assembly Complete, Left ea. 0 0-STD Front Tube Standard ea. 05-R T-Arm Assembly Complete, Right ea. 0-SH Front Tube Short ea. 05- T-Arm Assemblies Comp., Rt & Lt pr. 0 Panel ea. 05-L Lower T-Arm Assembly Left ea. 0 Receiver Tube Cap ea. 05-R Lower T-Arm Assembly Right ea. 3 09 Height Adjust Post ea. 05- Lower T-Arm Assemblies Lt & Rt pr. 9039 Spacer Bushing ea. 3 05-L Upper T-Arm Assembly Left ea. 5 900 Spring ea. 05-R Upper T-Arm Assembly Right ea. 093 Desk Style Arm Pad 9 / Long ea. 05- Upper T-Arm Assemblies Lt & Rt pr. 09 Full Length Arm Pad 3 / Long ea. 059 Receiver Socket ea. 90 Screw, 0-3 X / Pan Head ea. 5 00 Receiver Frame Clamp ea. 905 Screw, 0-3 X 3/ Button Head ea. 0 Receiver Tube ea. 9 900 Screw, 0-3 X / Button Head ea. 03 Receiver Tube Clamp ea. 0a 900 Screw, /-0 X / Hex Head ea. 0 Frame Release Lever ea. 0b 90 Screw, /-0 X / Hex Head ea. 9 05-R Height Release Assembly Right ea. 90 Locknut, 0-3 Nylon ea. 05-L Height Release Assembly Left ea. 90 Washer, / Flat ea.
ARMRESTS Adjustable Height, Paediatric 3 9 9 5 3 0 3 5 5 5 5 3 STANDARD SEAT WIDTH REQUIRES ()INNER CLAMP (ITEM 5) AND USES -/ LONG MOUNTING SCREW (ITEM a) EXTENDED SEAT WIDTH REQUIRES () INNER CLAMPS AS SHOWN AND USES -/ LONG MOUNTING SCREWS (ITEM b) 00-L T-Arm Assembly, Ped. Complete Lt. ea. 0-P Front Tube Paediatric ea. 00-R T-Arm Assembly, Ped. Complete Rt. ea. 03 Panel, T-Arm ea. 00- T-Arm Assemblies, Ped. Cmplt. R & L pr. 3 0 Receiver Tube Cap, T-Arm ea. 0-L Lower T-Arm Assembly, Ped. Lt. ea. 09-P Height Adjust Post, T-Arm ea. 0-R Lower T-Arm Assembly, Ped. Rt. ea. 5 0 Spacer Tube, T-Arm ea. 0- Lower T-Arm Assemblies, Ped. Lt & Rt pr. 3099 Tube Plug 3/ ea. 3 0-L Upper T-Arm Assembly, Ped. Left ea. 9039 Spacer Bushing, T-Arm ea. 0-R Upper T-Arm Assembly, Ped. Right ea. 900 Spring, T-Arm ea. 0- Upper T-Arm Assemblies, Ped. Lt & Rt pr. 9 093 Desk Style Arm Pad 9 / Long ea. 059 Receiver Socket, T-Arm ea. 0 90 Screw, 0-3 x Button Head ea. 5 00 Receiver Frame Clamp, T-Arm ea. 90 Screw, 0-3 x / Phillips Pan Head ea. 0-P Receiver Tube, T-Arm ea. 905 Screw, 0-3 x 3/ Button Head ea. 03 Receiver Tube Clamp, T-Arm ea. 3 900 Screw, 0-3 x / Button Head ea. 0 Frame Release Lever, T-Arm ea. a 900 Screw, /-0 x / Hex Head ea. 9 05-L Height Release Assembly Left ea. b 90 Screw, /-0 x / Hex Head ea. 05-R Height Release Assembly Right ea. 5 90 Locknut, 0-3 Nylon ea. 05- Height Release Assemblies Lt. & Rt. pr. 90 Washer, / Flat ea.
BACK CANES & STROLLER HANDLES 3 *To order One Piece and Push Button Adjustable Stroller Handles (item numbers & ), please specify width after part number e.g. 05- is wide. 9 0 5 5 9 3 00- Backpost Tubes Short pr. 9 0 Adapter Tube ea. 0- Backpost Tubes Medium pr. 0 0 Stroller Handle ea. 0- Backpost Tubes Tall pr. *03 Pc. Push Handle Extension. Q. R. ea. a 303- Backposts, Ergo Short pr. *05 Push Button Adj. Stroller Handle ea. 30- Backposts, Ergo Medium pr. 3 99 Foam Grip ea. 305- Backposts, Ergo Tall pr. 9000 Tube Plug, ea. 050-N Rigidising Assembly Narrow ea. 5 9005 Plastic Saddle, for 5/ Screw ea. 050-M Rigidising Assembly Medium ea. 00 Bumper Plug ea. 050-W Rigidising Assembly Wide ea. 903 Screw, /-0 X -/ Button Head ea. 3 05-N Rigidising Centre Tube Narrow ea. 9035 Screw, /-0 X -/ Button Head ea. 05-M Rigidising Centre Tube - Medium ea. 9 90 Screw, /-0 X / Hex Head ea. 05-W Rigidising Centre Tube Wide ea. 0 90 Screw, /-0 X -3/ Hex Head ea. 05-R Backpost Receiver Right ea. 90 Screw, 5/- X -/ Hex Head ea. 05-L Backpost Receiver Left ea. 903 Locknut, /-0 Nylon Thin ea. 5 053 Backpost Clamp ea. 3 90 Locknut, 5/- Nylon Thin ea. 05 Rigidizer Side Tube ea. 90 Washer, / Flat ea. 09 Rigidising Backrest Bar Mount Fitting ea. 5 9090 Washer, 5/ Flat Thin ea. 00 Stroller Handle Assembly ea. 903 Set Screw, /-0 X 3/ ea.
CASTOR COMPONENTS Forks 3 3 9 3 9 5 0 0 00-3 Castor Fork Assembly ea. 00- Castor Fork ea. 00-3 Castor Fork Assemblies pr. 0A 5, & Castor Fork ea. 005- Castor Fork Assembly ea. 03 Castor Spacer (except x ) ea. 005- Castor Fork Assemblies pr. 9 90 Screw, 5/- X / Hex Head ea. 3 0053-5, & Castor Fork Assembly ea. 0 90 Locknut, 5/- Nylon Thin ea. 0053-5, & Castor Fork Assemblies pr. 909 Washer, / Flat ea. 00A 3-5/ Castor Stem ea. 905 Locknut, /-0 Nylon - Thin ea. 00B Castor Stem ea. 3 909 Nut, / Hex Jam ea. 5 0 3 Castor Fork ea. 9
CASTOR COMPONENTS Mounting 3 No. PART # DESCRIPTION QTY 0 Cap Castor Barrel ea. 009 Bearing, / x / ea. 3 905 Locknut, /-0 Thin Nylon ea. 00A Castor Stem, 3-5/ ea. 0
CASTOR COMPONENTS Wheels & Bearings 3 5 9 0 3 0-3 Micro Light Up Castor ea. 0- x Poly Castors pr. 0-3 Micro Light Up Castors pr. 050- x / Poly Castor ea. 0-3 Micro Castor ea. 050- x / Poly Castors pr. 0-3 Micro Castor pr. 9 05- x Poly Castor ea. 3 05- Micro Castor ea. 05- x Poly Castors pr. 05- Micro Castors pr. 0 05- x Pneumatic Castor ea. 053- Micro Light Up Castor ea. 05- x Pneumatic Castors pr 053- Micro Light Up Castors pr. 0- x Poly Castor ea. 5 03-5 x Poly Castor ea. 0- x Poly Castors pr. 03-5 x Poly Castors pr. 0- x / Castor ea. 09-5 x / Poly Castor ea. 0- x / Castors pr. 09-5 x / Poly Castors pr. 3 009A Castor Wheel Bearing ea. 0- x Poly Castor ea.
FOOTRESTS Composite Flip-up Footplate This footplate is only for use with hangers or elevating legrest shown on pages &. 3 5 5 00-L Footplate Assembly, -3, Left ea. 005-R Footplate, -3, Right ea. 00-R Footplate Assembly, -3, Right ea. 00-L Footplate, -5, Left ea. 00 Footplate Assemblies, -3 pr. 00-R Footplate, -5, Right ea. 00-L Footplate Assembly, -5, Left ea. 00-L Footplate, -, Left ea. 00-R Footplate Assembly, -5, Right ea. 00-R Footplate, -, Right ea. 00 Footplate Assemblies, -5 pr. 00-L Footplate, Left ea. 003-L Footplate Assembly, -, Left ea. 00-R Footplate, Right ea. 003-R Footplate Assembly, -, Right ea. 3 EE9D Heel Loops pr. 003 Footplate Assemblies, - pr. 90 Heel Loop Mount Stud ea. 00-L Footplate Assembly, Left ea. 5 909 Heel Loop Mount Screw ea. 00-R Footplate Assembly, Right ea. 90 Screw, /-0 x 3/ Socket Head ea. 00 Footplate Assemblies pr. 90 Locknut, /-0 Nylon ea. 005-L Footplate, -3, Left ea.
FOOTRESTS Flip Up Footplate This footplate hinge is only for use with hangers or elevating legrest shown on pages &. 9 5a 5 3 0 0050-L Flip Up Footplate Assy, 0-, Lt. ea. 005- Pivot Arm Assemblies pr. 0050-R Flip Up Footplate Assy, 0-, Rt. ea. 3 005-L Pivot Arm Left ea. 0050- Flip Up Footplate Assy, 0- pr. 005-R Pivot Arm Right ea. 000-L Flip Up Footplate Assy, -3, Lt. ea. 00 Footplate Swivel Clamp ea. 000-R Flip Up Footplate Assy, -3, Rt. ea. 5 00 Hanger Spacer ea. 000- Flip Up Footplate Assy, -3 pr. 5a 00 Hanger Spacer Extended ea. 00-L Flip Up Footplate Assy, -5, Lt. ea. 000 Footplate Flip Up Angle Adj., 0- ea. 00-R Flip Up Footplate Assy, -5, Rt. ea. 00 Footplate Flip Up Angle Adj., -3 ea. 00- Flip Up Footplate Assy, -5 pr. 00 Footplate Flip Up Angle Adj., -5 ea. 00-L Flip Up Footplate Assy, -, Lt. ea. 003 Footplate Flip Up Angle Adj., - ea. 00-R Flip Up Footplate Assy, -, Rt. ea. 00 Footplate Flip Up Angle Adj., ea. 00- Flip Up Footplate Assy, - pr. 009 Footplate Pivot Spacer ea. 003-L Flip Up Footplate Assy,, Lt. ea. 903 Screw, /-0 x Button Head ea. 003-R Flip Up Footplate Assy,, Rt. ea. 9 9053 Screw, /-0 x 5/ Flat Head ea. 003- Flip Up Footplate Assy, pr. 0 90 Screw, /-0 x 5/ Socket Head ea. 005-L Pivot Arm Assembly Left ea. 90 Locknut, /-0 Nylon ea. 005-R Pivot Arm Assembly Right ea. 90 Washer, / Flat ea. 3
FOOTRESTS Removable Footboard 3 5 0 3 5 5 9 5 000 Removable Footboard Assy, 0- ea. 3033 Spacer Tube, 3 ea. 00 Removable Footboard Assy, -3 ea. 303 Spacer Tube, 5 ea. 00 Removable Footboard Assy, -5 ea. 3035 Spacer Tube, ea. 003 Removable Footboard Assy, - ea. 303 Spacer Tube, ea. 00 Removable Footboard Assy, ea. 5 30 Footboard Clamp ea. 3 Hardware Assembly, 0 set 30 Clamp Plate ea. 3 Hardware Assembly, 3 set 309 Receiver Assembly ea. 39 Hardware Assembly, 5 set 30 Frame Clamp ea. 30 Hardware Assembly, set 9 305 Locking Insert ea. 3 Hardware Assembly, set 0 30 Adjustment Tube ea. 3 03 Removable Footboard, 0 ea. 3099 Tube Plug, 3/ ea. 03 Removable Footboard, 3 ea. 903 Screw, /-0 x Hex Head ea. 039 Removable Footboard, 5 ea. 3 903 Screw, /-0 x / Button Head ea. 00 Removable Footboard, ea. 9050 Screw, /-0 x 3/ Flat Head ea. 0 Removable Footboard, ea. 5 90 Locknut, /-0 Nylon ea. 303 Spacer Tube, 0 ea. 90 Washer, / Flat ea.
BASE FRAME Standard & X-Wide 0 9 5 3 5 0 5 3 9 030-RS Side Frame Right, Short ea. 033X Mounting Pin, X-Wide ea. 030-RL Side Frame Right, Long ea. 03 Bearing Spacer Tube ea. 030-RXL Side Frame Right, XLong ea. 035A Plastic Guide Bottom Outer ea. 030-LS Side Frame Left, Short ea. 9 035B Plastic Guide Bottom Side ea. 030-LL Side Frame Left, Long ea. 0 035C Plastic Guide Top Side ea. 030-LXL Side Frame Left, XLong ea. 009 Bearing, / x / ea. 3 03-F Base Tilt Bracket Front ea. 03 / Fender Washer ea. 03-FX Base Tilt Bracket Front, X-Wide ea. 3 03 Tube Cap, / ea. 03-R Base Tilt Bracket Rear ea. 903 Screw, /-0 X / Button Head ea. 03-RX Base Tilt Bracket Rear, X-Wide ea. 5 903 Screw, /-0 X -/ Button Head ea. 5 03 Base Cross Bar Rear ea. 90 Washer, / Flat ea. 03X Base Cross Bar Rear, X-Wide ea. 9 Washer, / Flat ea. 033 Mounting Pin ea. 903A Set Screw, /-0 x 3/ ea. 5
SEAT / TILT FRAME Standard & X-Wide 5 0 3 0 5 0 3 5 9 0 9 0 0 5 0 00-S Tilt Frame Assembly Short ea. 03 Seat Insert ea. 00-L Tilt Frame Assembly Long ea. 9 30 Pop-Up Plug ea. 00-X Tilt Frame Assembly X-Wide ea. 0 30 Pop-Up Spring 5 Degree Hanger ea. 0-S Seat Frame Assembly Right, Short ea. 30 Pop-Up Spring 90 Degree Hanger ea. 0-M Seat Frame Assembly Right, Med. ea. 309 Hanger Release Lever ea. 0-L Seat Frame Assembly Right, Long ea. 900 Binding Screw Female ea. 0-X Seat Frame Assembly Rt, X-Wide ea. 3 90 Binding Screw Male ea. 3 0-S Seat Frame Assembly Left, Short ea. 9000 Tube Plug, ea. 0-M Seat Frame Assembly Left, Medium ea. 5 903 Screw, /-0 X -/ Button Head ea. 0-L Seat Frame Assembly Left, Long ea. 9035 Screw, /-0 X -/ Button Head ea. 0-X Seat Frame Assembly Left, X-Wide ea. 903 Screw, /-0 X -3/ Button Head ea. 00 Seat Extension pr. 90 Lock Nut, /-0 Nylon ea. 5 305 Hanger Support Pop-Up ea. 9 903 Lock Nut, /-0 Nylon - Thin ea. 0 Hanger Latch ea. 0 90 Washer, / Flat ea. 0 Latch Spring ea. 900 Washer, / Nylon ea.
GROWTH KITS Medium Growth Kit Short Frame (0 - Wide / 0 - Deep) to Medium Frame ( - Wide / - Deep) MEDIUM GROWTH KIT INCLUDES THE FOLLOWING: RIGHT AND LEFT MEDIUM SEAT FRAMES (#0-M & 0-M) EA. RIGHT AND LEFT LONG BASE FRAMES (#030-RL & 030-LL) EA. LONG TILT FRAME (#00-L) EA. BACK RIGIDISING CENTER TUBE MEDIUM (#05-M) EA. Long Growth Kit Medium Frame ( - Wide / - Deep) to Long Frame ( - Wide / - Deep) LONG GROWTH KIT INCLUDES THE FOLLOWING: RIGHT AND LEFT LONG SEAT FRAMES (#0-L & 0-L) EA. BACK RIGIDISING CENTER TUBE WIDE (#05-W) EA.
GAS SPRING COMPONENTS - X-Wide 9 5 3 0 00 Gas Spring ea. 900 Binding Screw Female ea. 00 Mount Bar Gas Spring ea. 90 Binding Screw Male ea. 3 05 Mount Tube Gas Spring ea. 9 90 Screw, /-0 X / Socket Head ea. 0 Spring Seat Gas Spring ea. 0 903 Screw, / x / Button Head ea. 5 0 Collar Clamp Spring ea. 90 Washer, / Flat ea. 0 Spring ea. 900 Washer, / Plastic ea.
TILT ASSEMBLY Standard & X-Wide 9 5 3 3 5 0 5 039 Tilt Arm Standard ea. 300 Nylon Bearing ea. 039X Tilt Arm X-Wide ea. 9 0 Pedal Pad ea. 00 Tilt Lock Barrel Housing ea. 0 09 Tilt Spring ea. 3 0 Tilt Lock Barrel ea. 9033 Screw, /-0 X Button Head ea. 0 Tilt Lock Arm Standard ea. 903 Screw, /-0 X 3/ Button Head ea. 0X Tilt Lock Arm X-Wide ea. 3 90B Screw, 5/- X 3 / Hex Head ea. 5 0 Pedal Plate ea. 90 Lock Nut, 5/- Nylon-Thin ea. 05 End Cap Tilt Arm ea. 5 90 Washer, / Flat ea. 0 Spacer Bushing ea. 9090 Washer, 5/ Flat Thin ea. 9
HANGERS Pop Up from serial number CGX-50 0 0 5 9 3 9 These hangers require footplate assemblies shown on pages & 3. 00- Pop Up Hanger Assembly 90 ea. 009- Pop Up Hanger Support Tube 90 ea. 00 Pop Up Hanger Assembly 90 pr. 5 00- Pop Up Hanger Support Tube 5 ea. 00- Pop Up Hanger Assembly 5 ea. 303 Pivot Fitting Pop Up ea. 00 Pop Up Hanger Assembly 5 pr. 05 Alignment Guide ea. 3 00- Hanger Extension Assembly, / / Long ea. 00 Locking Insert ea. 00- Hanger Extension Assembly, / / Long pr. 9 9000 Tube Plug, ea. 003- Hanger Extension Assembly, / / Long ea. 0 903 Screw, /-0 x 3/ Button Head ea. 003- Hanger Extension Assembly, / / Long pr. 90 Screw, /-0 x 3/ Flat Head ea. 0
HANGERS Pop Up Elevating Legrest 5 0 This legrest must be used with new flip up footplate assembly (see pages & 3) 3 3 5 9 5 9 0 9 9 3 0-L ELR Assy w/o Pad & Footplate, Left ea. 9 9 Calf Pad Angle Stop ea. 0-R ELR Assy w/o Pad & Footplate, Right ea. 0 9 Pivot Insert ea. 0 ELR Assy w/o Pads & Footplates pr. 93 Pivot Insert Bushing ea. -L ELR Assy w/ Pad, w/o Footplate, Left ea. 09 Calf Pad Mount Plate ea. -R ELR Assy w/ Pad, w/o Footplate, Right ea. 3 0- Calf Pad ea. ELR Assy w/ Pads, w/o Footplates pr. 0 Calf Pads pr. -L ELR Assy w/ Pad & Footplate, Left ea. 903 Screw, /-0 X 3/ Button Head ea. -R ELR Assy w/ Pad & Footplate, Right ea. 5 903 Screw, /-0 X / Button Head ea. ELR Assy w/ Pads & Footplates pr. 9035 Screw, /-0 X / Button Head ea. - Hanger Weldment, Pop Up ea. 90 Screw, /-0 X 5/ Button Head ea. - Hanger Weldment, Pop Up pr. 90 Screw, /-0 x 3/ Flat Head ea. 3 3 Length Adjustment Tube ea. 9 903 Locknut, /-0 Nylon - Thin ea. 90-R Locking Mechanism Right ea. 0 90 Washer, / Flat ea. 90-L Locking Mechanism Left ea. 905 Washer, / Flat - Thin ea. 5 05 Alignment Guide ea. 903 Screw, 5/- X / Flat Head ea. 303 Pivot Fitting Pop Up ea. 3 90 Locknut, 5/- Nylon - Thin ea. 00 Locking Insert ea. 9090 Washer, 5/ Flat Thin ea. 9 Pad Mount Hook ea.
WHEEL LOCKS Lever Style & Accessories 5 3 0 9 9 500-L Push to Lock Wheel Lock Left (no clamp) ea. 50-R Push to Lock Lever Assembly Right ea. 500-R Push to Lock Wheel Lock Right (no clamp) ea. 50- Push to Lock Lever Assemblies pr. 0-L Push to Lock Wheel Lock / Clamp Left ea. 505-L Pull to Lock Lever Assembly Left ea. 0-R Push to Lock Wheel Lock / Clamp Right ea. 505-R Pull to Lock Lever Assembly Right ea. 0- Push to Lock Wheel Locks pr. 505- Pull to Lock Lever Assemblies pr. 3 500-L Pull to Lock Wheel Lock Left (no clamp) ea. 03 Wheel Lock Mounting Clamp ea. 500-R Pull to Lock Wheel Lock Right (no clamp) ea. 509 Wheel Lock Swivel Arm Long ( ) ea. 0-L Pull to Lock Wheel Lock / Clamp Left ea. 9 00 Lock Extensions pr. 0-R Pull to Lock Wheel Lock / Clamp Right ea. 0 50B Cap for Wheel Lock Extension ea. 0- Pull to Lock Wheel Locks / Clamps pr. 50C- Plastic Cap for Wheel Lock Handle ea. 5 50-L Push to Lock Lever Assembly Left ea.
WHEELS Mag Assemblies Mag Wheel, and Mag Wheel with Tyre & Tube PART # DESCRIPTION QTY PART # DESCRIPTION QTY - Mag Wheel with Tyre and Tube ea. 5- Mag Wheel with Tyre and Tube ea. - Mag Wheel with Tyre and Tube ea. Mag Wheel with Tyre & Insert PART # DESCRIPTION QTY PART # DESCRIPTION QTY 00- Mag Wheel with Tyre and Insert ea. 0- Mag Wheel with Tyre and Insert ea. 0- Mag Wheel with Tyre and Insert ea. Wheels Only Part No. Description Qty. 0 / X / Poly Tyre ea. 09 / X / Pneumatic Tyre ea. 03 x 3/ Pneumatic Tyre ea. 03 X 3/ Pneumatic Tyre ea. Tyres Part No. Description Qty. 00 Mag Rim with Bearings ea. 0 Mag Rim with Bearings ea. 0 Mag Rim with Bearings ea. Inner Tubes Part No. Description Qty. 03 / X / Inner Tube ea. 03 X 3/ Inner Tube ea. 03 X 3/ Inner Tube ea. Solid Tyre Inserts Part No. Description Qty. 0 / X / Solid Insert ea. 03 X 3/ Solid Insert ea. 0 X 3/ Solid Insert ea. Additional Components PART # DESCRIPTION QTY PART # DESCRIPTION QTY 009 Bearings, / X / ea. 000 Hub Cap for Mag Wheel ea. 3
Invacare UK Ltd. Invacare Ireland Pencoed Technology Park Unit 5, Seatown Business Campus Pencoed Seatown Road Bridgend Swords CF35 5HZ County Dublin Tel: 05 Ireland Fax: 05 0 Tel: + 353 00 E Mail: ordersuk@invacare.com Fax: + 353 005 E Mail: ireland@invacare.com Web: www.invacare.ie