MATERIAL SAFETY DATA SHEET. Revision Number: 3

Similar documents
MATERIAL SAFETY DATA SHEET. Revision Number: 0 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

MATERIAL SAFETY DATA SHEET 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING 2. COMPOSITION/INFORMATION ON INGREDIENTS

MATERIAL SAFETY DATA SHEET. Revision Number: 1

MATERIAL SAFETY DATA SHEET. Revision Number: 3

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET. Section 1. IDENTIFICATION

IDQ Operating, Inc. 44 Old Ridgebury Road Suite 300 Danbury, CT Tel Product And Company Identification

Material Safety Data Sheet ANSI Format

Issue Date: 13-Dec-2012 Revision Date: 10-APR-2015 Version 2 1. IDENTIFICATION. United 432 PHASER GLASS BLAST. Concentrated glass cleaner.

MSDS Table of Contents Click the desired link below to jump directly to that section in the MSDS.

SAFETY DATA SHEET. Section 1. IDENTIFICATION

SAFETY DATA SHEET. 1. Identification of the substance/mixture and of the company /undertaking

1. Product And Company Identification. ARMOR ALL Air Freshening Protectant Pure Linen

SAFETY DATA SHEET. CU-8120 Enzyme & bacteria digestive powder. None. (800) (800) Category 5 Category 3 Category 2B

Material Safety Data Sheet

NAME: CINNAMON OIL SDS NO. 1937

Safety Data Sheet Lyden Oil Company

Issue Date: 01-Jun-2010 Revision Date: 10-Sep-2015 Version 1 1. IDENTIFICATION MSH-32, MSH-1, MSH HAZARDS IDENTIFICATION

SPOTLESS :: Safety Data Sheet Version 1.0 Issuing Date 06/1/15

MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON INGREDIENTS

MATERIAL SAFETY DATA SHEET

BT-701. Advanced Chemical Technology, Inc. SAFETY DATA SHEET Version 1.0 Effective Date: 06/01/15 1. PRODUCT AND COMPANY IDENTIFICATION

Gulf Compressor Synthetic DE Lubricant

Issue Date: 27-Aug-2012 Revision Date: 02-Nov-2012 Version 1 1. IDENTIFICATION

Safety Data Sheet. (Glycerine) Glycerine DATE PREPARED: 6/18/2015. Section 1. Product and Company Identification. Product Name CAS Number

SAFETY DATA SHEET SECTION 1 IDENTIFICATION. MB4908 Product Line

SAFETY DATA SHEET. 1. Identification of the substance/mixture and of the company/undertaking

Safety Data Sheet Roadranger GREASE EP-2 Revision date : 2011/06/20 Page: 1/6

IncuCyte Annexin V Green Reagent

GHS Classification: 1. PRODUCT AND COMPANY IDENTIFICATION. Product Identity: Crude Glycerin Chemical Name: 1,2,3-propanetriol

Whyte Gate, Inc. SAFETY DATA SHEET

SAFETY DATA SHEET (800)

Issue Date: 16-Feb-2012 Revision Date: 24-Feb-2015 Version 2 1. IDENTIFICATION. United 894 ZYME-OUT. For industrial and institutional use only.

8728 Utica Avenue Rancho Cucamonga, CA Telephone: 24 Hours: or Daytime: Fax:

IDQ Operating, Inc. 44 Old Ridgebury Road Suite 300 Danbury, CT Tel Product And Company Identification

Material Safety Data Sheet Potassium Cocoate (PCOCOATE) April 22, 2015

SAFETY DATA SHEET (800) (800) Category 2 Category 2A

WT-9011 SAFETY DATA SHEET Version 1.0 Effective Date: 06/01/2015

Digital Press Fuser Oil/ Fuser Agent II

1. Product And Company Identification

SECTION 1: Identification of the substance/mixture and of the company/undertaking

Advanced Organics Carbon Based Fertilizers Inc.

1. IDENTIFICATION. WipesPlus Patient Washcloths. INFOTRAC (International) (North America) 2. HAZARDS IDENTIFICATION

SAFETY DATA SHEET (800) (800) Category 2 Category 2A

Issuing Date 17-May-2013 Revision Date 21-Nov-2016 Revision Number 1 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

Issue Date Revision Date Version 19-Sep Aug PRODUCT AND COMPANY IDENTIFICATION

Water-based Dye Ink - Magenta

Issue Date Revision date Revision Number Identification of the Substance/Preparation and of the Company/Undertaking

Issue Date: 27-Dec-2011 Revision Date: 03-Feb-2015 Version 1 1. IDENTIFICATION. Malodor Eliminator, Water Based.

IP6046 MOLD SOAP- GREEN PASTE SAFETY DATA SHEET Version 1.0 Effective Date: 05/27/16

Material Safety Data Sheet

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Preparation Date: 20-Jan-2009 Revision Date: 05-Dec-2016 Revision Number: 4

Safety Data Sheet. Issue Date: 06-Aug-2009 Revision Date: 18-Apr-2014 Version 1 1. IDENTIFICATION. Liquid disinfectant cleaner.

SAFETY DATA SHEET 1. IDENTIFICATION 2. HAZARDS IDENTIFICATION. Product Identifier. Additional Identification Product Code: Synonyms: 19015

SAFETY DATA SHEET. Section 1. IDENTIFICATION

Emergency Overview The product contains no substances which at their given concentration are considered to be hazardous to health.

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING 2. HAZARD IDENTIFICATION

SAFETY DATA SHEET SECTION 1 PRODUCT AND COMPANY INFORMATION SECTION 2 COMPOSITION INFORMATION ON INGREDIENTS SECTION 3 HAZARDS IDENTIFICATION

Issue Date: March 27, 2017 Revision Date: March 27, 2017 Version: PRODUCT AND COMPANY IDENTIFICATION

Safety Data Sheet. SECTION 1: Identification of the substance/mixture and of the company/undertaking

SAFETY DATA SHEET (800) (800)

Safety Data Sheet European Format

Safety Data Sheet 1818BR

Revision Date 13-Jul IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING. No information available

Material Safety Data Sheet. Drum Cartridge

Revision Date 14-May-2015 Version 1 1. IDENTIFICATION. For technical, scientific, manufacturing or R&D use. 2. HAZARDS IDENTIFICATION

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET 2. COMPOSITION/INFORMATION ON INGREDIENTS

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING. Entity / Business Name Oxoid Ltd.

Issue Date: 04-Dec-2004 Revision Date: 18-Nov-2013 Version 1 1. IDENTIFICATION. Plastpro Fiberglass Doors 2. HAZARDS IDENTIFICATION

Revision Date 13-Jul IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING. Cyproheptadine hydrochloride

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Drum Cartridge. Issuing Date Revision Date Version 1

3.2. Mixture Name Product identifier % GHS-US classification

Safety Data Sheet. Section 1. Product and Company Identification. Section 2. Hazards Identification

Safety Data Sheet Bulldog Durex EPDM Rinseable Primer #115

8728 Utica Avenue Rancho Cucamonga, CA Telephone: 24 Hours: or Daytime: Fax:

SIGMA-ALDRICH. Material Safety Data Sheet Version 4.2 Revision Date 11/22/2012 Print Date 03/04/2014

1. IDENTIFICATION FAST FIND LEAK DETECTOR. Package type: 32oz & 1 gallon. For Professional use only. 2. HAZARDS IDENTIFICATION

2. HAZARDS IDENTIFICATION GHS Classification: Acute oral toxicology 5, Acute dermal toxicaology 5, specific target organ toxicology 2

SAFETY DATA SHEET. Date: August 15, 2018

Safety Data Sheet. Section 2. Hazards Identification. Not classified. Caution - substance not yet fully tested.

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET CERAMIC GLAZE

Surfactant which improves penetration and rainfastness of Roundup herbicide.

Safety Data Sheet Lyden Oil Company

Hazard Communication Standard Safety Data Sheet Nature's Way Sweeping Compound, Red Oil-based

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET. 1. Identification of the substance/mixture and of the company/undertaking

Safety Data Sheet. (Sorbitan Tristearate) DATE PREPARED: 8/14/2015. Section 1. Product and Company Identification

SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING. 129 Lockwood St CHEM-TEL (24 hour)

Tetrasodium Pyrophosphate Safety Data Sheet

SAFETY DATA SHEET SECTION 1 - IDENTIFICATION

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

SAFETY DATA SHEET MS010. Date Revised: 01/23/ of 5 1. IDENTIFICATION AND GENERAL INFORMATION P/N#: 3001, , Nomenclature:

SAFETY DATA SHEET (800) (800)

Transcription:

STABURAGS NBU 12 MATERIAL SAFETY DATA SHEET Print date: 01-Apr-2013 Revision Number: 3 Revision date: 01-Apr-2013 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Product Name: STABURAGS NBU 12 Article Code: 017052 Synonyms: Chemical characterisation: Not applicable.. Supplier: Klüber Lubrication North America L.P. 32 Industrial Drive Londonderry, NH 03053 (603) 647-4104 Fax (603) 647-4106 Emergency telephone number CHEMTREC: 1-800-424-9300 International: (703) 527-3887 2. COMPOSITION/INFORMATION ON INGREDIENTS Components CAS-No ACGIH (TWA mg/m 3 ): OSHA (TWA mg/m 3 ): Mineral oil 5 (oil mist) 5 (oil mist) Barium complex soap None None 3. HAZARDS IDENTIFICATION Properties affecting health: Principle routes of exposure: Skin contact: Eye contact: Inhalation: Ingestion: Harmful if swallowed Skin. Prolonged skin contact may cause skin irritation and/or dermatitis.. Contact with eyes may cause irritation. Vapors and/or aerosols which may be formed at elevated temperatures may be irritating to eyes and respiratory tract. Harmful if swallowed. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhoea 4. FIRST AID MEASURES General advice: Skin contact: Eye contact: If symptoms persist, call a physician. Rinse with plenty of water. If skin irritation persists, call a physician. Flush eye with water for 15 minutes. If symptoms persist, call a physician. Product name: STABURAGS NBU 12 1 of 5

Inhalation: Ingestion: Notes to physician: Move to fresh air in case of accidental inhalation of fumes from overheating or combustion. If symptoms persist, call a physician. Do not induce vomiting. Consult a physician. Treat symptomatically. 5. FIRE-FIGHTING MEASURES Suitable extinguishing media: Carbon dioxide (CO2), Dry chemical, Dry sand, Water spray mist or foam Extinguishing media which must not be used for safety reasons: Do not use a solid water stream as it may scatter and spread fire. Special protective equipment for firefighters: In the event of fire and/or explosion do not breathe fumes. In the event of fire, wear self-contained breathing apparatus. Standard procedure for chemical fires. Specific hazards: Unusual hazards: Specific methods: Flash point: Autoignition temperature: Flammability Limits in Air: Lower Upper Burning produces irritant fumes. In the event of fire and/or explosion do not breathe fumes No hazards resulting from the material as supplied Water mist may be used to cool closed containers. Standard procedure for chemical fires. Not applicable... 6. ACCIDENTAL RELEASE MEASURES Personal precautions: Environmental precautions: Methods for cleaning up: Contaminated surfaces will be extremely slippery. Avoid contact with skin, eyes and clothing. Wear personal protective equipment. Prevent further leakage or spillage if safe to do so. Do not allow material to contaminate ground water system. Prevent product from entering drains. Scrape-up. Pick up and transfer to properly labelled containers. Clean contaminated surface thoroughly. 7. HANDLING AND STORAGE Handling Technical measures/precautions: Safe handling advice: Storage Technical measures/storage conditions: Incompatible products: No special technical protective measures required. Spilling onto the container`s outside will make container slippery. Avoid contact with skin, eyes and clothing. Handle in accordance with good industrial hygiene and safety practice. Keep containers tightly closed in a dry, cool and wellventilated place. Keep away from open flames, hot surfaces and sources of ignition. Keep in properly labelled containers. Keep out of reach of children. No materials to be specially mentioned. 2 of 5

8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering measures to reduce exposure: Ensure adequate ventilation, especially in confined areas.. Personal Protective Equipment Respiratory protection: Hand protection: Skin and body protection: Eye protection: Hygiene measures: No personal respiratory protective equipment normally required. Impervious gloves. Usual safety precautions while handling the product will provide adequate protection against this potential effect.. Safety glasses with side-shields. Avoid contact with skin, eyes and clothing. 9. PHYSICAL AND CHEMICAL PROPERTIES Physical State: Grease Color: Brown Specific gravity: ~ 0.99 Evaporation rate: Vapor pressure: Appearance: Odor: Boiling point/range Vapor density: Solubility: Paste Not significant Insoluble. 10. STABILITY AND REACTIVITY Stability: Polymerization: Hazardous decomposition products: Materials to avoid: Conditions to avoid: Stable under normal conditions Hazardous polymerisation does not occur. None under normal use Strong oxidising agents. Heat, flames and sparks.. 11. TOXICOLOGICAL INFORMATION Acute toxicity: Mineral oil: LD50 > 5,000 mg/kg (oral, rat), LD50 > 3,000 mg/kg (dermal, rabbit). 12. ECOLOGICAL INFORMATION Mobility: Bioaccumulative potential:.. Ecotoxicity effects: Aquatic toxicity: No data available. 13. DISPOSAL CONSIDERATIONS Waste from residues / unused products: Contaminated packaging: In accordance with local and national regulations. Empty containers should be taken for local recycling, recovery or waste disposal 14. TRANSPORT INFORMATION DOT 3 of 5

Proper shipping name: 14. TRANSPORT INFORMATION TDG (Canada) IMO / IMDG Proper shipping name: ICAO IATA Proper shipping name: 15. REGULATORY INFORMATION TSCA TSCA: Listed in TSCA U.S. Regulations: Mineral oil MARTK: Listed. NJRTK: Substance no. 1437 Listed. Substance no. 4004 Listed. PARTK: Listed. RIRTK: Listed. ILRTK: Listed. Barium complex soap SARA 313 Threshold: Barium compound (25-35%) Sara (311, 312) hazard class: Canada WHMIS hazard class: 16. OTHER INFORMATION NFPA Health: 1 Flammability: 1 Instability: 0 HMIG Health: 1 Flammability: 1 Reactivity: 0 Reason for revision: Prepared by: Not applicable Health & Safety 4 of 5

The information and recommendations contained herein are based upon tests believed to be reliable. However, Klüber does not guarantee their accuracy or completeness NOR SHALL ANY OF THIS INFORMATION CONSTITUTE A WARRANTY, WHETHER EXPRESSED OR IMPLIED, AS TO THE SAFETY OF THE GOODS, THE MERCHANTABILITY OF THE GOODS, OR THE FITNESS OF THE GOODS FOR A PARTICULAR PURPOSE. Adjustment to conform to actual conditions of usage maybe required. Klüber assumes no responsibility for results obtained or for incidental or consequential damages, including lost profits arising from the use of these data. No warranty against infringement of any patent, copyright or trademark is made or implied. 5 of 5