From lab to production, providing a window into the process Dynisco SPX Industrial (2280/2281) Series Smart General Purpose Pressure Sensors Description The Dynisco SPX228X is an all welded construction smart industrial 4-20mA pressure transmitter designed for use in hazardous locations. Models are available in PSIG, PSIA, and PSIS. Optional pressure fittings and electrical terminations are available. Features 4-20mA loop-powered output +/- 0.25% accuracy available Wide selection of pressure ranges available Turndown 3:1 Configurations available for use in hazardous locations Remotely configurable via HART TM Precise, repeatable pressure measurements Output supplied directly to DSC or PLC Meets CE requirements CE ATEX Intrinsically Safe Approved FM Explosion Proof Approved CSA Explosion Proof Approved SIL 2 Certified (Pressure Output) PL'c' Certified (Relay Output) Additional approvals are available
Smart General Purpose Pressure Sensors for Hazardous Locations Performance Characteristics SPX2280 & SPX2281 Output Input Voltage Accuracy Accuracy is defined as the combined error expressed as a percentage of full scale output with the specifications of: Electronics ambient temperature, capillary of <= 36"; DyMax coated 15-5 SST diaphragm; Best Straight Line (BSL) %FS, per ISA-37.1 Consult Factory for availability and specifications of other configurations. 4-20 ma, with optional HART 16-36 Vdc (Std); 16-30 Vdc (ATEX IS) 2280 ± 0.5% 2281 ± 0.25% Repeatability ±0.1% Rangeability 3:1 Turndown Over Pressure 1.5 x FSO; 250-30,000 psi 1.2 x FSO; 35,000-72,500 psi Zero Balance Adjustment Range ±5% FSO Maximum Load Resistance 500 Ω @ 24 Vdc, 1,000 Ω @ 36 Vdc Electronics Ambient Temperature 70 F (20 C) Operating Temperature -20 to 185 F (-29 to 85 C) Compenstated Temperature Range 0 to 150 F (-18 to 65 C) Span Shift (Temp Change) All Models: 0.02% F.S./ F max (0.04% F.S./ C max) Zero Shift (Temp Change) Burst Pressure All Models: 0.01% F.S./ F max (0.02% F.S./ C max) 250 psi: 10 X FSO 500-3,000 psi: 5 X FSO 5,000-10,000 psi: 3 X FSO 15,000-30,000 psi: 2.5 X FSO 40, 000-72,500 psi: 1.5 X FS Mechanical Characteristics Standard Wetted Parts 15-5 PH & 17-4 PH SST Approvals & Certifications CE ATEX IS SIL 2 (pressure output) & PL'c' (relay output) FM & CSA Explosion Proof Additional Approvals are Available
Smart General Purpose Pressure Sensors for Hazardous Locations Ordering Guide for Models SPX2280 & SPX2281 1 2XXX X X X XX X X XX X XXXX Approval E = Explosion Proof S = ATEX/Intrinsically Safe N = No Approvals Pressure Reference E = Absolute Pressure (Bar) N = Absolute Pressure (Kgf/cm 2 ) H = Absolute Pressure (KPa) R = Absolute Pressure (MPa) A = Absolute Pressure (PSI) B = Gage Pressure (Bar) K = Gage Pressure (Kgf/cm 2 ) C = Gage Pressure (KPa) M = Gage Pressure (MPa) G = Gage Pressure (PSI) D = Sealed Pressure (Bar) L = Sealed Pressure (Kgf/cm 2 ) F = Sealed Pressure (KPa) P = Sealed Pressure (MPa) S = Sealed Pressure (PSI) Process Connection A = 1/8-27 NPTF Internal B = 1/4-18 NPTF Internal C = 7/16-20 UNF Internal D = F-250-C Autoclave E = 1/4-18 NPTF External F = 1/2-14 NPTF External G = 7/16-20 UNF External H = R1/4 Metric K = 3/4-16 UNF External L = 1/2-14 BSP External M = 1/2-14 NPSM External N = F-562-C Autoclave P = 1 BSP Internal R = F-375-C Autoclave Model 280 281 Pressure Units B = BAR C = KPa K = Kgf/cm 2 M = MPa P = PSI Wiring Connections 4 = 2 Wire Conduit 5 = 2 Wire Connector Option Code Communications A = No Protocol B = HART TM Protocol Pressure Range 13= 250 psi 17.5 Bar 17.5 Kgf/cm 2 MPa 14 = 500 psi 35 Bar 35 Kgf/cm 2 3.5 MPa 15 = 750 psi 50 Bar 50 Kgf/cm 2 5 MPa 16 = 1,000 psi 70 Bar 70 Kgf/cm 2 7 MPa 17 = 1,500 psi 100 Bar 100 Kgf/cm 2 10 MPa 20 = 3,000 psi 200 Bar 200 Kgf/cm 2 20 MPa 21 = 5,000 psi 350 Bar 350 Kgf/cm 2 35 MPa 22 = 7,500 psi 500 Bar 500 Kgf/cm 2 50 MPa 23 = 10,000 psi 700 Bar 700 Kgf/cm 2 70 MPa 24 = 15,000 psi 1,000 Bar 1,000 Kgf/cm 2 100 MPa 25 = 20,000 psi 1,400 Bar 1,400 Kgf/cm 140 MPa 27 = 30,000 psi 2,000 Bar 2,000 Kgf/cm 2 200 MPa 28 = 35,000 psi 2,400 Bar 2,400 Kgf/cm 2 240 MPa 29 = 40,000 psi 2,700 Bar 2,700 Kgf/cm 2 270 MPa 30 = 50,000 psi 3,500 Bar 3,500 Kgf/cm 2 350 MPa 31 = 60,000 psi 4,200 Bar 4,200 Kgf/cm 2 420 MPa 32 = 72,500 psi 5,000 Bar 5,000 Kgf/cm 2 500 MPa Electrical Connections AC = PT1H-10-6P Connector CA = 1/2-14 NPT Conduit with 42" Leads AF = PCIH-12-8P Connector Threaded Style 1 Other configurations are avaialble. Please consult factory.
Smart Gereral Purpose Pressure Sensors for Hazardous Locations Drawing SPX2280 ZERO Z DO E x NOT 7/8 in. (FLATS) WAR R E MOV E N S EA L Alignment Flat IN G S S C RE W S SPAN VIEW A-A 3 - Conductor 5 - Conductor Cable Wiring Color Function RED E+ BLACK E- GREEN GROUND ORANGE Rcal + BLUE Rcal - -A Ftg = 5-20,000 PSIG -B Ftg = 5-20,000 PSIG -C Ftg = 5-10,000 PSIG -D Ftg = 5-60,000 PSIG Where; -R Ftg = 5-60,000 PSIG Fitting - R (and Fittings A thru D) (PRESSURE LISTED ABOVE) 18 AWG STRANDED, CABLE WIRE 1/2-14 NPT 7/8 FLATS LEAD LENGTH (42 in., std (107cm) 1.48 37.7mm 4.00 101.6mm END FITTING (SEE CHART) 5.48 + END FITTING ±.12 (3.1mm) (139.2 mm) Fitting - E Fitting - F Fitting - G (5-7,500 PSIG) Fitting - H Fitting - L (1,000-40,000 PSIG) 12.7mm.70.91 10.2mm.48 12.1mm 1.18 30mm.052.050 1.32mm 1.27mm O-RING GROOVE K265 OPT.ONLY Fitting - M.25 6.4mm 1-1/8 HEX 1.325 33.7mm Fitting - N Fitting - K (INCLUDES PSIS & PSIG) 1.014 4 25.8mm 25.5mm.098.093 2.5mm 2.4mm () Fitting - P.75 19mm (12.7mm) (1,000-30,000 PSIG) 2.05 HEX (52mm) Pressure Fitting Quick Reference Suffix DESCRIPTION TYPE -- A 1/8-27 NPTF -- B 1/4-18 NPTF -- C MS33649-4 -- D F-250-C -- E 1/4-18 NPTF -- F 1/2-14 NPTF Conduit ftg -- G MS33656-4 -- H R 1/4 -- K 3/4-16 UNF EXT. Thread -- L 1/2-14 BSP -- M 1/2-14 NPSM -- N F-562-C -- P 1" BSP -- R F-375-C.59 15mm 14mm 1.38 35.1mm
Smart Gereral Purpose Pressure Sensors for Hazardous Locations Drawing SPX2281 ZERO Z DO E x NOT WAR R E MOV E N S EA L Alignment Flat IN G S S C RE W S SPAN VIEW A-A 3 - Conductor 5 - Conductor RED E+ BLACK E- GREEN GROUND ORANGE Rcal + BLUE Rcal - -A Ftg = 5-20,000 PSIG -B Ftg = 5-20,000 PSIG -C Ftg = 5-10,000 PSIG -D Ftg = 5-60,000 PSIG Where; -R Ftg = 5-60,000 PSIG Fitting - R (and Fittings A thru D) (PRESSURE LISTED ABOVE) 18 AWG STRANDED, CABLE WIRE 1/2-14 NPT 7/8 FLATS LEAD LENGTH (42 in., std (107cm) 1.48 37.7mm 4.00 101.6mm END FITTING (SEE CHART) 5.48 + END FITTING ±.12 (3.1mm) (139.2 mm) Fitting - E Fitting - F Fitting - G (5-7,500 PSIG) Fitting - H Fitting - L (1,000-40,000 PSIG) 12.7mm.70.91 10.2mm.48 12.1mm 1.18 30mm Fitting - K (INCLUDES PSIS & PSIG).25 6.4mm.052.050 1.32mm 1.27mm 1-1/8 HEX 1.325 33.7mm Fitting - N O-RING GROOVE K265 OPT.ONLY 1.014 4 25.8mm 25.5mm.098.093 2.5mm 2.4mm () Fitting - M Fitting - P (12.7mm).75 19mm (1,000-30,000 PSIG) 2.05 HEX (52mm) Pressure Fitting Quick Reference Suffix DESCRIPTION TYPE -- A 1/8-27 NPTF -- B 1/4-18 NPTF -- C MS33649-4 -- D F-250-C -- E 1/4-18 NPTF -- F 1/2-14 NPTF Conduit ftg -- G MS33656-4 -- H R 1/4 -- K 3/4-16 UNF EXT. Thread -- L 1/2-14 BSP -- M 1/2-14 NPSM -- N F-562-C -- P 1" BSP -- R F-375-C.59 15mm 14mm 1.38 35.1mm
REV ECO BY APP DATE A 46553 TP LEB 07/29/16 PIN H S Z 8 - PIN PC O-RING WITH PUSH BUTTONS PCIH-12-8P GUARDIAN CONNECTOR WIRING PIN FUNCTION A POWER + B SIGNAL - C POWER - D NO CONNECTION E Rcal - F Rcal + G RELAY CONTACT H RELAY CONTACT PIN A PIN B 000652 PIN A PIN B PIN A PIN B PIN H PIN H 8 - PIN PC WELDED WITH PUSH BUTTONS PCIH-12-8P 8 - PIN PC WELDED WITH HALLS PCIH-12-8P NOTE: 1. THESE CONNECTOR OPTIONS ARE AVAILABLE ON MOST OF THE CONFIGURATIONS SHOWN ON THE PREVIOUS SHEETS. TOLERANCES UNLESS OTHERWISE SPECIFIED; 1. 2 PLACE DECIMAL ±.01 3 PLACE DECIMAL ±.005 2. FRACTIONS ± 1/32 3. DRILLS < 0.5 DIA 4. ANGLES ± 0.5 +.005 -.002 0.5 DIA 5. FILLETS R.005 MAX 6. EDGES R.005 OR CHAMFER MAX 7. PART TO BE FREE OF BURRS 8. ALL DIMENSIONS ARE IN INCHES. MODEL NO. MATERIAL x x +.008 -.003 DO NOT SCALE DRAWING TITLE DRAWN CHECKED APPROVED FINISH GUARDIAN SERIES CONNECTORS TP DATE 7/27/16 DATE LEB DATE 7/27/16 63 EXCEPT AS MAY BE OTHERWISE PROVIDED BY CONTRACT, THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF DYNISCO, ARE ISSUED IN STRICT CONFIDENCE, AND SHALL NOT BE REPRODUCED OR COPIED, OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS WITHOUT PERMISSION. SIZE B SCALE FORGE PARKWAY, FRANKLIN MA DWG. NO. 000652 NONE Instruments 1 SHEET OF REV A 1 R >
2016. Dynisco reserves the right to make changes without notice. Refer to www.dynisco.com for access to Operator Manual and other support documentation. PN: DSSPX228081SERIES REV: 0716 ECO: 46503 www.dynisco.com Dynisco Hotline 1-800-Dynisco Dynisco Europe, GmbH Dynisco Shanghai 38 Forge Parkway www.dynisco.com Pfaffemstr. 21 Phone +49 7131 297 0 Building 7A, No. 568 Phone +86 21 34074072-819 Franklin, MA 02038 Phone +1 508 541 9400 74078 Hellbronn Fax +49 7131 297 166 Longpan Rd Malu Toll Free +86 400 728 9117 USA Fax +1 508 541 6206 Germany Email dyniscoeurope@dynisco.com Jiading, 201801 China Fax +86 21 34074025 Email infoinst@dynisco.com