1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING Product information Commercial Product Name : Product code : 1511802508 MSDS-Identcode : 10035561 Company : Würth Handelsges.m.b.H. Würth Strasse 1 3071 Böheimkirchen Austria E-mail address: thomas.meindorfer@wuerth.at Telephone : +43 (0)5 08242 0 Telefax : +43 (0)5 08242 53333 Responsible/issuing person : E-mail address: prodsafe.wurth@sap.com Emergency telephone : Vergiftungs-Informations-Zentrale +43 (0)1 406 43 43 Use : Starter batteries for motor vehicles. 2. HAZARDS IDENTIFICATION Classification (67/548/EEC, 1999/45/EC) T Toxic N Dangerous for the environment R61 May cause harm to the unborn child. R20/22 Also harmful by inhalation and if swallowed. R33 Danger of cumulative effects. R35 Causes severe burns. R50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R62 Possible risk of impaired fertility. As an article the product does not need to be labelled in accordance with EC-directives or respective national laws. 3. COMPOSITION/INFORMATION ON INGREDIENTS 1 / 10
Chemical nature : lead batteries Hazardous components Chemical Name CAS-No. EC-No. / Registration number Classification Lead 7439-92-1 231-100-4 Xn; R20/22 R33 N; R50/53 Repr.Cat.1; R61 Repr.Cat.3; R62 Concentration [%] >= 65 - < 70 Sulphuric acid 7664-93-9 231-639-5 C; R35 >= 25 - < 35 For the full text of the R-phrases mentioned in this Section, see Section 16. 4. FIRST AID MEASURES General advice Inhalation Skin contact Eye contact Ingestion : In the case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). When symptoms persist or in all cases of doubt seek medical advice. First aider needs to protect himself. Move out of dangerous area. Never give anything by mouth to an unconscious person. Take off contaminated clothing and shoes immediately. : If breathed in, move person into fresh air. If symptoms persist, call a physician. Keep patient warm and at rest. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. : Call a physician immediately. Do NOT use solvents or thinners. Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty. Immediately flush skin with large amounts of water. : Protect unharmed eye. If easy to do, remove contact lens, if worn. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. : Take victim immediately to hospital. If a person vomits when lying on his back, place him in the recovery position. 5. FIRE-FIGHTING MEASURES Suitable extinguishing media Unsuitable extinguishing media : Dry powder, Foam, Carbon dioxide (CO2) : Water 2 / 10
Specific hazards Special protective equipment for fire-fighters Further information : Do not use a solid water stream as it may scatter and spread fire. Hazardous decomposition products may be formed under fire conditions (see section 10). Exposure to decomposition products may be a hazard to health. : In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment. : Standard procedure for chemical fires. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. In the event of fire and/or explosion do not breathe fumes. Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. 6. ACCIDENTAL RELEASE MEASURES Personal precautions Environmental precautions Methods for cleaning up : Refer to protective measures listed in sections 7 and 8. Use personal protective equipment. Avoid contact with skin and eyes. Ensure adequate ventilation, especially in confined areas. Remove all sources of ignition. Immediately evacuate personnel to safe areas. : Do not flush into surface water or sanitary sewer system. If the product contaminates rivers and lakes or drains inform respective authorities. Avoid release to the environment. Refer to special instructions/ Safety data sheets. : Contain and collect spillage with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations. Use mechanical handling equipment. Keep in suitable, closed containers for disposal. Pick up and transfer to properly labelled containers. Clean contaminated surface thoroughly. Do not flush with water. 7. HANDLING AND STORAGE Handling Advice on safe handling Advice on protection against fire and explosion : For personal protection see section 8. Avoid exposure - obtain special instructions before use. Limit the stocks at work place. Avoid contact with skin and eyes. Handle with care. : Normal measures for preventive fire protection. Keep away from heat and sources of ignition. 3 / 10
Storage Requirements for storage areas and containers Advice on common storage Other data : Store in a place accessible by authorized persons only. Keep locked up or in an area accessible only to qualified or authorised persons. Store in original container. Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from direct sunlight. : Keep away from food, drink and animal feedingstuffs. : No decomposition if stored and applied as directed. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Components with workplace control parameters Components CAS-No. Control parameters Basis Update Lead 7439-92-1 TMW (inhalable fraction): 0,1 mg/m3, AT OEL 2003-03-18 KZW (inhalable fraction): 0,4 mg/m3, Sulphuric acid 7664-93-9 TMW (inhalable fraction): 1 mg/m3, AT OEL 2006-06-29 KZW (inhalable fraction): 2 mg/m3, Components CAS-No. Control parameters Basis Update Lead 7439-92-1 TWA: 0,15 mg/m3, 98/24/EC I 1998-05-05 Other information on limit values: see chapter 16 Engineering measures Provide sufficient air exchange and/or exhaust in work rooms. Personal protective equipment Respiratory protection : In the case of vapour formation use a respirator with an approved filter. In the case of dust or aerosol formation use respirator with an approved filter. Respirator with combination filter for vapour/particulate (EN 141). 4 / 10
Respirator with filter type ABEK Hand protection Material : PVC Remarks Eye protection : Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous substance and specific to place of work. For special applications, we recommend clarifying the resistance to chemicals of the aforementioned protective gloves with the glove manufacturer. : Wear eye/face protection. Ensure that eyewash stations and safety showers are close to the workstation location. Skin and body protection : Wear suitable protective clothing. Safety shoes Choose body protection according to the amount and concentration of the dangerous substance at the work place. Hygiene measures : Handle in accordance with good industrial hygiene and safety practice. General industrial hygiene practice. Do not breathe dust. Avoid contact with skin, eyes and clothing. When using do not eat, drink or smoke. Wash hands before breaks and at the end of workday. Follow the skin protection plan. Wash contaminated clothing before re-use. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Form Odour Safety data Flash point Density : solid : odourless : does not flash : 1,21-1,30 g/cm3 Sulphuric acid 10. STABILITY AND REACTIVITY Conditions to avoid : Keep away from heat and sources of ignition. 5 / 10
Hazardous decomposition products Hazardous reactions : Hydrogen, Oxygen : Formation of flammable/highly flammable gases possible. Stability : No decomposition if stored and applied as directed. 11. TOXICOLOGICAL INFORMATION Acute oral toxicity: Sulphuric acid : LD50 (rat): 2.140 mg/kg Acute inhalation toxicity: Sulphuric acid : LC50 (rat): 510 mg/m3 Exposure time: 2 h Skin irritation: Sulphuric acid : Extremely corrosive and destructive to tissue. Eye irritation: Sulphuric acid : Risk of serious damage to eyes. CMR effects: Lead : Teratogenicity: Tests in some animals may indicate that the technical active ingredient may have embryotoxic activity. Further information : If ingested, severe burns of the mouth and throat, as well as a danger of perforation of the oesophagus and the stomach. 6 / 10
12. ECOLOGICAL INFORMATION Toxicity to fish: Lead : LC50 (Oncorhynchus mykiss (rainbow trout)): 0,14 mg/l Exposure time: 96 h Additional ecological information : The product should not be allowed to enter drains, water courses or the soil. 13. DISPOSAL CONSIDERATIONS Advice on disposal and packaging : Disposal: In accordance with local and national regulations. This material and its container must be disposed of in a safe way. Do not dispose of together with household waste. Dispose of as hazardous waste in compliance with local and national regulations. Waste codes should be assigned by the user based on the application for which the product was used. 14. TRANSPORT INFORMATION ADR UN-Number : 2794 Description of the goods : BATTERIES, WET, FILLED WITH ACID Class : 8 Packing group : -- Classification Code : C11 Hazard identification No : 80 Labels : 8 Limited quantity : -- Tunnel restriction code : (E) Environmentally hazardous : no Not a subject to the provisions of ADR/RID in accordance with special provision 598. RID UN-Number : 2794 Description of the goods : BATTERIES, WET, FILLED WITH ACID Class : 8 Packing group : -- 7 / 10
Classification Code : C11 Hazard identification No : 80 Labels : 8 Limited quantity : -- Environmentally hazardous : no Not a subject to the provisions of ADR/RID in accordance with special provision 598. IATA UN-Number : 2794 Description of the goods : Batteries, wet, filled with acid Class : 8 Packing group : -- Labels : 8 Packing instruction (cargo : 800 aircraft) Environmentally hazardous : no Packing instruction (passenger aircraft) : 800 IMDG UN-Number : 2794 Description of the goods : BATTERIES, WET, FILLED WITH ACID (Lead) Class : 8 Packing group : -- Labels : 8 EmSNumber 1 : F-A EmS Number 2 : S-B Marine pollutant : yes 15. REGULATORY INFORMATION Labelling according to EC Directives 1999/45/EC Symbol(s) : T Toxic N Dangerous for the environment R-phrase(s) : R61 May cause harm to the unborn child. R20/22 Also harmful by inhalation and if swallowed. R33 Danger of cumulative effects. R35 Causes severe burns. R50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R62 Possible risk of impaired fertility. S-phrase(s) : S53 Avoid exposure - obtain special instruc- 8 / 10
S22 S26 S35 S36/37/39 S45 S57 tions before use. Do not breathe dust. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. This material and its container must be disposed of in a safe way. Wear suitable protective clothing, gloves and eye/face protection. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). Use appropriate container to avoid environmental contamination. Hazardous components which must be listed on the label: 7439-92-1 Lead 7664-93-9 Sulphuric acid Special labelling of certain mixtures : The product is an article and is not subject of Directive 67/548/EEC or Directive 1999/45/EC. : Warning! Contains lead. Restricted to professional users. Further information : Reserved for industrial and professional use. Directive (96/82/EC) : Quantity 1 Quantity 2 Dangerous for the environment 100 t 200 t National legislation Other regulations : Take note of Dir 94/33/EC on the protection of young people at work. Take note of Dir 92/85/EEC on the safety and health at work of pregnant workers. 9 / 10
16. OTHER INFORMATION Full text of R-phrases referred to under sections 2 and 3 R20/22 Harmful by inhalation and if swallowed. R33 Danger of cumulative effects. R35 Causes severe burns. R50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R61 May cause harm to the unborn child. R62 Possible risk of impaired fertility. Other information The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. Prepared by : TechniData BCS GmbH Birlenbacher Str. 19 D-57078 Siegen Germany Telephone: +49-(0)271-88072-0 Ref.: WAT100000176 10 / 10