www.divatormask.com
CORPORATE OVERVIEW Interspiro has over 60 years of experience in the design of Breathing Apparatus for demanding firefighting and diving conditions >> Industry firsts, include positive pressure, full composite cylinders, 300 bar technology, computer monitored SCBA >> Part of Ocenco, the joint group ranks among the worlds largest manufacturers of breathing protection equipment
Interspiro Diving System Approach
>> The complete SCUBA has a CE-approval (EN250) >> Cylinders DOT approved >> Interspiro has full control over integration of all parts of the SCUBA equipment >> Superior performance for cold water use (NEDU)
DIVATOR LITE Carbon fiber composite cylinder pack
DIVATOR LITE Design concept 4. Carbon fiber/epoxy laminate 3. End part 1. Thermoplastic liner 2. Nipple 5. Label 6. Outer glass fibre layer
DIVATOR LITE Cylinder Technical Data (6.7 liter, 140 cu ft) Weight empty 12,3 kg ( 27,0 lbs ) Weight full (air) 17,0 kg (37,5 lbs ) Service pressure 300 bar ( 4350 psi) Test pressure PT 450 bar (6525 psi) Min burst pressure 900 bar ( 13050 psi ) Lifetime Europe No Limit (US 15 years) Underwater application DOT approved Hydrostatic pressure test Every 5 th year Inside cylinder inspection Every 5 th year
DIVATOR LITE Cylinder Technical Data (3.4 liter, 72 cu feet) Weight empty 7,2 kg ( 15,8 lbs ) Weight full (air) 9,4 kg (20,7 lbs ) Service pressure 300 bar ( 4350 psi) Test pressure PT 450 bar (6525 psi) Min burst pressure 900 bar ( 13050 psi ) Lifetime Europe No Limit (US 15 years) Underwater application DOT approved Hydrostatic pressure test Every 5 th year Inside cylinder inspection Every 5 th year
DIVATOR LITE Detachable Cylinder-pack weight
Back to the origin Retro design of weights in brass or bronze alloys
DIVATOR MK II 2 >> Minimized design, no protruding parts >> Few grips, all easy to reach >> By minimizing the operating procedures the diver can maintain focus on the mission >> The SCUBA is designed to minimize the number of failure modes, improving safety
DIVATOR MK II 3 >> Developed to endure extreme temperatures.( 198 feet sea water at 29 F water temp by NEDU. EN 250. 50 meter. 62,5 l/m) >> Proven for use from arctic to equator >> Finger tight fittings >> Designed to be used for contaminated water diving >> Low breathing resistance >> Reserve air valve
Divator MK II Mask, AGA Mask >> Balanced breathing valve with or without positive pressure >> Mutually centered inhalation and exhalation diaphragm eliminates WOB differences caused by divers attitude >> Many years of operations in freezing rapid currents
>> Low volume visor, reduces positive buoyancy >> Self-rinsing exhalation valve >> Easy to drain water from mask >> Low dead air space considerably reduces re-inhalation of CO 2 >> Excellent for communication
DIVATOR MASK 3
DIVATOR HUD and DIVATOR ABV >> Easily attached to a standard Divator MK II Full Face Mask >> Fits a wide range of regulators >> A mechanical pressure switch automatically activates the LED HUD when the cylinder pressure is below 870 psi (55 bar) >>Deactivated below 145 PSI (10 bar)
DIVATOR BCW WING TYPE BUOYANCY COMPENSATOR Front Back
DIVATOR DP1 >> DIVATOR DP1 Surface Supply hose (neutral buoyant) Inner diameter 2 mm ( 0.08 inch) >> Made of Oleo-Dynamic (Aramid type ) with woven Kevlar reinforcement, protected by an external polyurethane layer, for ease of decontamination >> Lightweight with an outside diameter of 0,4 Inch ( 10 mm ) >> Working pressure 4350 PSI (300 Bar) >> The burst pressure exceeds 21,760 PSI >> Max 360 feet ( 120 meter) >> Tensile load 900 Kg or 2,000 LBS >> P+ Regulator 145 PSI with lockable quick connector.
Divator Surface Supply Diving Panel >> Light weight, mobile solution for diving in remote locations >> Sealed Transportation box >> Primary Pressure Gauge >> Easy to operate, attendant do not need to compensate for different diving depths
Divator Surface Supply Diving Panel >> Automatic audible low air alarm sounding when pressure is down to 800 PSI >> Automatic shuttle valve for easy change of cylinders.
Divator Surface Supply Diving Panel >> T connector for air supply to two divers (Maximum 300 feet) >> Bleed valves (ease change Cyl.) >> Size (Inch) H 16,5W15,7D7,9 >> Weight LBS 10,8 ( 4,9 Kg ) >> Approvals 89/686 ECC >> Compl. appl. parts of EN 250
Oxydive, Closed Circuit Oxygen Rebreather >> For stealthy shallow water operations, used by military organizations for covert reconnaissance missions >> The canister is isolated to minimize effects of cold temperature
Demand Controlled Semi-Closed Rebreather >> Mine countermeasures >> Excellent magnetic signature and acoustic qualities >> Mechanical demand regulated dosage of gas, same consumption regardless of diving depth ACSC 1978
DCSC
IS MIX
A Selection of Government Customers US Air Force US Army US Coast Guard US Navy US Secret Service US Customs US DEP FBI Dive Teams NASA NOAA UK Royal Navy French Navy German Navy Netherlands Navy Austrian Navy Swedish Navy Swedish Army Swedish Air Force Swedish Coast Guard Danish Navy Danish Air Force Finnish Navy Norwegian Navy Norwegian Air Force Australian Navy New Zealand Navy New Zealand Army Indian Navy Indian Army Pakistan Navy Indonesian Navy Singapore Navy Malaysian Army
Military Search and Rescue
SP-100D Surface Buddy Phone
MKII-BUD Buddy Phone
Aquacom SSB-2010 Transceiver
M-ICU Silicone Masks
TACOPS BC
IQ Backpack Custom BC
Slipstream Fins
HAZMAT
Public Safety/SAR Fusion
Full Line of Portables