Quality Family Games Basketball Instructions Model 752.69 Product Registration 752.69 08/14/14 Visit www.carrom.com to register your product to receive the latest product updates, special offers, and other product related information.
Part List for Duel Basketball Game #1 #8 #14 Pipe 1 #2 Pipe 8 #9 #15 Support Bar Pipe 2 #3 Pipe 3 #4 Pipe 9 #10 J Hook #16 #5 Pipe 4 Pipe 10 #11 Chute #17 #6 Pipe 5 Pipe 11 #12 Backboard #18 Pipe 6 #7 Hinge 12 #13 Hoop with Net #19 Pipe 7 Pipe 13 Support Plate 1
Part List Continued #20 #27 #34 60mm Bolt #21 45mm Bolt 4 Pieces #28 L Wrench #35 #22 Electronic Scorer 40mm Bolt #29 Power Pack #36 Basketballs 6 Pieces #23 1/8 x 3/4 Screw 8 Pieces # Plastic Foam Block Pump #24 Flat Washer Pieces # 35mm Bolt 14 Pieces #25 Lock Nut Pieces #32 20mm x 5mm Bolt 4 Pieces #26 Lock Nut 32 4 Pieces #33 20mm x 6mm Bolt 8 Pieces Wrench 2
Step 1 Connect pipes #4 with #3 on each side - push buttons should lock. Connect pipes #6 and #3 using bolts #24, washer #, and lock nuts #. Connect pipes #8 and #9 together. Connect pipes #6 and #9 using bolts #20, washer #, and lock nuts #. Add pipe #2 to pipe #3 (push button lock), then connect pipe #7 and pipe #8 (push button lock). Connect pipes #7 and #2 using bolts #24, washer #, and lock nuts #. Repeat on other side of game. 7 24 2 7 2 3 3 8 6 8 24 6 4 9 9 20 3
Step 2 Attach pipes #10 into bracket of pipe #6 (use end of tube with two holes close to end and bolt into hole at very end) using bolt #28, washer #, and lock nut #. Attach pipe #11 to other end of pipe #10 using bolt #24, washer #, and lock nut #. Attach hinge #12, with hinge folding upward, to pipes #10 and #11 using bolt #24, washer #, and lock nut #. Hinges should attach to outside edge of game. Repeat on other side of the game. 6 28 24 10 12 11 10 12 11 Step 3 Attach the rims #18 to the front of the backboard using bolts #26, support plates #19, washers #, and lock nuts # as shown. Assemble nets to rims. 19 17 18 26 4
Step 4 Connect pipes #5 and #2 using bolt #24, washer #, and lock nut #. Slide pipes #1 and #2 together. Attach the backboard #17 to pipes #1 and #2 using bolt #27, washer #, and lock nut # through the two top holes on backboard. Attach J hook #15 and backboard together using bolt #27, washer #, and lock nut # in bottom holes. 1 1 17 15 2 24 2 27 5 3 3 4 4 5
Step 5 Attach electronic scorer #21 to the back of the back of backboard #17 using bolt #25 and lock nut #32. Screw the sensors into the back of the backboard using screws #29. Make sure the sensors with the Top sticker go in the top hole and the sensors with the Bottom sticker go in the bottom hole. Top (Gray Wire) 32 Top (White Wire) 21 29 Bottom (Black Wire) 17 Bottom (Red Wire) 25 Step 6a Remove two-sided tape from back of plastic foam block #37 and attach to back of backboard above scoring unit. See diagram on foam block. Step 6b Slide the end of chute #16 over pipe #13 as shown in the diagram below. 16 13 6
Step 7 Attach the ends of pipe #13 to both ends of pipe #11 as shown below. Affix the chute to the other end of the game near the backboard as shown in the inset drawings. Attach velcro strap from chute around pipe #13. 1 15 16 2 13 11 14 7
Step 8 Attach the support bar #14 over the chute and on outside end of pipe #13 using bolts #24, washer #, and lock nuts # as shown below. 24 14 8
To secure the unit upright when not in use, simply fold the unit up by folding the hinge #12, lift up bar #10, secure clevis pin lock by inserting the pin into the bracket hole then through the second hole on the pipe and then through the bracket hole. 9
Power Pack Connection 1. Plug the power pack cord into the scoring unit. 2. Plug the power pack into the wall outlet. Unplug the power pack when not in use. Always grasp the power pack at the outlet. Do not pull the cord to remove the plug from the wall outlet. Power Pack Safety Make sure the power cord does not cross an area where someone could trip over it. Be sure there s enough slack in the cord when it s connected to the outlet and the power pack. Keep liquids away from the power pack. Should it get wet, do not touch it. Turn off the power at a wall switch or fuse box before removing the plug from the outlet. Take #23 pump and remove needle from needle storage compartment in base of handle. Attach to end of pump. Moisten needle before inserting in Basketball Use and Care basketball. Pump up to desired size. Put needle back in storage compartment when done. 10
Instructions The object of the game is to score the most points in each round. The electronic scoring unit will keep time. As the balls are shot towards the basket they will roll back to the shooter in the chute. Keep shooting the balls until the second clock reaches zero (sound effects will indicate end of round). To Play: Turn the power on by plugging in the power pack. Once either player makes the first shot, the time will begin to count down. Baskets count as 2 points during the first 20 seconds and 3 points during the last 10 seconds. If either player reaches points during the first round, there is a 15 second extension. An additional 10 seconds is added if either player reaches 90 points before the extension expires. All baskets during the extension times are worth 3 points each. After the game ends, the display will show both players scores for 5 seconds. Auto Shut Off Mode The unit will turn off after 5 minutes of inactivity. Press the reset button to restart the game. Important Notes The unit must be unplugged after using to prolong the life of the infrared detector. This game is intended for indoor use only. Sensors may not operate properly if used outdoors. NOTICE: THIS GAME IS INTENDED FOR HOME USE ONLY. ANY COMMERCIAL OR INSTITUTIONAL USE WILL VOID THIS WARRANTY THIS PRODUCT IS INTENDED FOR USE BY OR UNDER THE SUPERVISION OF ADULTS. Limited Warranty Carrom Company warrants all games to be free from defect in material and workmanship for a period of ninety (90) days from the dates of original purchase. Should any defects in material or workmanship appear during that warranty period, the components will be repaired or replaced at Carrom location This warranty doesn t include damage due to misuse, vandalism, shipping, or incorrect assembly of components. This warranty give you specific right and you may also have other rights, which vary from state to state. Please file your claim to the customer service department at the address below. You must include the following: 1. Proof of purchase. 2. Faulty components with detailed explanation of the problem. 3. Your return address and daytime phone number. Carrom Company Attn: Customer Service 218 E. Dowland St. PO Box 649 Ludington, MI 494 (2) 845-1263 ext. 232 (2) 843-9276 fax (800) 223-6047 toll free customerservice@carrom.com www.carrom.com