SERES REMOE SELS SRY RSMERS
ROUO he SR series is a complete line of diaphragm seals including threaded, flanged and sanitary designs. he seals are available in a wide selection of wetted materials meet various process requirements, but without being unnecessarily expensive. Standard diaphragm seals are available in models conforming S, and JS specifications. Other standards are also available on request, consult Smar for available options. wide variety of sizes and ratings are available for these standards. langed seals are available in dimensions up mm ( in) and ratings up bar ( psi). hreaded seals are available in sizes up ½ in rated at psi. he maximum process pressure depends on the seal rating and the maximum process temperature. he temperature limitation depends on the material and fill fluid chosen, and the minimum process pressure. Seals are available with fill fluids that can operate at temperatures as high as. he complete system of seal, capillary and transmitter is manufactured and assembled in Smar s own facry under our own complete control. he Smar SR line of remote seals is specially designed with a minimum diaphragm displacement be used with Smar electronic pressure transmitters. reat care has been taken in the design of the seals ensure that the seal affects the high accuracy associated with Smar electronic transmitters as little as possible. nother major design objective was adhere standards and recommended practices for process connection and seal construction. remote seal isolates the pressure transmitter from the process while still allowing the transmitter measure the pressure. he main application for a remote seal is as a protective device, however, it also enables a differential pressure transmitter be used for density measurement. he function of a remote seal is: o prevent the process fluid from entering the pressure transmitter thereby protecting the instrument if the process fluid is corrosive and would otherwise attack and destroy the transmitter. o prevent process fluids with very high temperature from coming in contact with and destroying or otherwise affecting the pressure sensor. o prevent abrasive process fluids from scratching the isolating diaphragm. his may happen if the process fluid is carrying suspended solids. o prevent the process fluid from building up or solidifying inside the transmitter and blocking the transmission of pressure the sensor. his may happen if the process fluid freezes, polymerizes or is carrying suspended solids, is viscous or crystallizing. Sanitary seals are used prevent bacteria etc. build up in cavities in the transmitter. hese seals are designed be easily cleaned. hese are required in the pharmaceutical and food & beverage industries. he remote seal is connected the transmitter via an armored capillary. properly installed remote seal hydraulically transmits the process pressure the sensor of the pressure transmitter through the liquid filled capillary. he capillary is very thin and the transmitters are fitted with a special seal connection with a very small volume keep the amount of fill fluid at a minimum.
EERL PPLO OSEROS void these common mistakes: Wetted materials not compatible with the process fluid. onsider normal operation as well as cleaning. ill fluid not compatible with the process fluid may cause hazardous situations in case of diaphragm ruptures and the fluids come in contact with each other. or some process fluids only a certain fill fluid may be used, but that fill fluid may be incompatible with other materials that may be present in piping etc. Other considerations are the food and drug industries where even mildly poisonous fill fluids cannot be used. Vacuum below mmg requires special considerations. Operation at these high vacuums is possible if done right. onsult Smar for advice. Process data such as pressure, temperature, required seal type and process fluid must be furnished evaluate the application. Only one seal or capillaries with different lengths on a differential pressure transmitter causes zero shift as the temperature changes. Long capillaries cause response time increase and augments temperature effect. he temperature is beyond the upper or lower operating temperature range of the fill fluid. he process pressure exceeds the seal pressure rating at maximum process temperature. he pressure rating for seals decreases with rising temperature and may under certain conditions be lower than the nominal rating. Upper measurement ranges below mm O will see errors as the remote seal reduces the sensitivity of the transmitter. OE : he user must insure that the right type of seal with the proper fill fluid and wetted materials is used, and if a remote seal should be used at all. OE : ill luid onsiderations efore a fill fluid is chosen, it must be determined that it is suitable for operation at the extremes of vacuum and temperature at which it will operate. nother important consideration is that the diaphragm may be damaged. t is therefore important that the fill fluid does not start a hazardous chemical reaction with the process fluid. s a rule of thumb, do not use hydrocarbon based fill fluids, such as silicone, with strong oxidizers like: chlorine, hydrogen, hydrazine, oxygen, peroxide or nitric acid. lso do not use luorolube oil if there is a chance for it come in contact with aluminium or magnesium. Special fill fluids are available. Vacuum onsiderations he fill fluid vapor pressure point is dependent on temperature. t a combination of high temperature and pressure near vacuum the fill fluid may vaporize and the pressure measurement becomes inaccurate. he seal may also become permanently destroyed. areful selection of fill fluid is therefore of up most importance. he SR series offers four standard fill fluids. rief data is given in table. or more data, e.g., vapor pressure curves, and fill fluids for special requirements, please contact Smar. See our SR manual for temperature errors and response time calculations.
LE YPE REMOE SEL W LUS OEO OPO he SR is a single piece flanged connection seal. here is an optional lower housing with a flush connection. he diaphragm is welded the upper housing enabling the user remove the lower housing. he seal is bolted the process connection with a sealing gasket in between. he flush connection enables rinsing of the diaphragm remove deposits without disconnecting the seal. f installed correctly, the upper housing is not wetted (in contact with process fluid) during normal operation. owever, the lower housing is. olts, nuts are not supplied with the seal. or dimensions see tables, and. or Pressure Limits see tables, and S. Pressure Limits (ppendix). Material SS. MOEL SR LE "" YPE REMOE SEL Process onnection Size, Rating and Standard " # S. R " # S. R " # S. R " # S. R " # S. R /" # S. R /" # S. R /" # S. R /" # S. R /" # S. R " # S. R " # S. R " # S. R " # S. R " # S. R " # S. R " # S. R " # S. R " # S. R " # S. R " # S. R apillary Length mm mm mm mm mm mm mm mm mm mm iaphragm Material M U astelloy L SS Monel antalum itanium L SS with eflon Lining antalum with eflon Lining L SS old Plated K S ill luid () / Silicone Oil Silicone Oil MO luorolube Oil lycerium and Water Kryx eobee M Propylene Oil / Silicone Oil Syltherm Lower ousing Without SS astelloy asket Material E E E Without asket eflon rafoil opper P/ ORM P/ ORM P ORM P/ ORM P/ ORM P ORM P ORM P/ ORM P ORM P ORM P ORM P ORM P/ ORM P ORM P ORM P ORM P/ ORM P/ ORM JS K JS K JS K JS K JS K JS K Optional tems* ZZ Special Options Specify SR S / * YPL MOEL UMER () luorolube fill fluid is not available with Monel diaphragm * Leave it blank for no optional items
LE REMOE SEL W EXESO he SRE is a single piece flanged connection seal. he diaphragm is extended from the housing and welded the extension. he seal is bolted the process connection with a sealing gasket in between. olts, nuts and gasket are not supplied with the seal. or dimensions see tables, and. or Pressure Limits see tables, and S.a Pressure Limits (ppendix). Material SS. MOEL SRE LE REMOE SEL W EXESO Process onnection Size, Rating and Standard " # S. R " # S. R " # S. R " # S. R " # S. R " # S. R " # S. R " # S. R " # S. R P/ ORM P/ ORM P/ ORM P/ ORM apillary Length mm mm mm mm mm mm mm mm mm mm iaphragm Material () M U astelloy L SS Monel antalum itanium L SS with eflon Lining antalum with eflon Lining L SS old Plated K S ill luid () / Silicone Oil Silicone Oil MO luorolube Oil lycerium and Water Kryx eobee M Propylene Oil / Silicone Oil Syltherm Extension Lenght () mm mm mm mm mm (") (") (") (") (") Optional tems* ZZ Special Options Specify SRE S / * YPL MOEL UMER () luorolube fill fluid is not available with Monel diaphragm * Leave it blank for no optional items
REE YPE REMOE SEL he SRR is a threaded connection seal. he diaphragm is welded the upper housing enabling the user remove the lower housing. he lower and upper housing are bolted gether and sealed with a gasket. he lower housing has an optional flush connection. he seal is threaded the process connection. he flush connection enables rinsing of the diaphragm remove deposits without disconnecting the seal. SS bolts and nuts are supplied with the seal. Upper ousing Material: SS MOEL SRR REE REMOE SEL Process onnection Size, Rating and Standard / P / P / P / P P / P (not available with flhush connection) Pressure Limit psi apillary Length mm mm mm mm mm mm mm mm mm mm M U iaphragm Material astelloy L SS Monel antalum itanium L SS with eflon Lining antalum with eflon Lining L SS old Plated K S ill luid () / Silicone Oil Silicone Oil MO luorolube Oil lycerium and Water Kryx eobee M Propylene Oil / Silicone Oil Syltherm Lower ousing SS astelloy asket Material eflon () rafoil opper lush onnection Without lush onnection With lush onnection (Except for / P onnection) Optional tems* ZZ Special Options Specify SRR / * YPL MOEL UMER () luorolube fill fluid is not available with Monel diaphragm () Max. emperature= for Pressure bar bs Max. emperature= psi or bar * Leave it blank for no optional items
SRY REMOE SEL he SRS is a seal for food and other applications where sanitary connections are required. he diaphragm is welded the housing. he connection the process can be threaded or rilamp type, that allow a easy and quick connected/disconnected of the equipment the process. he flush connection enables rinsing of the diaphragm remove deposits without disconnecting the seal. or seal dimensions see page. MOEL SRS SRY REMOE SEL E K L M Process onnection Size Rating () hread " # With Extension hread RJ " # With Extension rilamp " # With Extension rilamp " # With Extension hread SMS " # With Extension hread P With Extension hread P With Extension rilamp P With Extension rilamp P With Extension hread " # Without Extension hread RJ " # Without Extension rilamp " # Without Extension rilamp " # Without Extension hread SMS " # Without Extension rilamp ½" # Without Extension rilamp ½" # Without Extension rilamp " # Without Extension rilamp " # Without Extension hread P Without Extension rilamp " # With Extension rilamp " # With Extension hread " # With Extension hread RJ " # With Extension hread SMS " # With Extension apillary Length mm mm mm mm mm mm mm mm mm mm iaphragm Material astelloy L SS S ill luid / Silicone Oil Silicone Oil MO luorolube Oil lycerium and Water / Silicone Oil Wetted ORing V Without ORing With eflon ORing una Vin ank dapter Without ank dapter With ank dapter in SS rilamp Without rilamp With rilamp in SS Optional tems* ZZ Special Options Specify SRS / * YPL MOEL UMER () Material in SS * Leave it blank for no optional items
LS SRY E PRESSURE RSMER he LS series are gage transmitters for food and other applications where sanitary connections are required. hey are used where clearinplace applications are needed. heir technical specifications are same contained in the L catalog. he specifications for accuracy, drift and temperature effect are the same as that of LL/L. he process connections can be threaded or clamped (rilamp), allow a quick and easy connection and disconnection from the process. he flush connection enables rinsing of the diaphragm remove deposits without disconnecting the seal. or seal dimensions see page. MOEL SRS SRY E PRESSURE RSMER Range... M kpa kpa kpa iaphragm Material L SS astelloy antalum Monel ill luid () K S Process onnection Size and Rating () E O P Q R / Silicone Oil Silicone Oil MO luorolube Oil lycerium and Water Kryx eobee M Propylene lycol Oil / Silicone Oil Local ndicar Without ndicar With ndicar hread " # With Extension hread RJ " # With Extension rilamp " # With Extension hread SMS " # With Extension hread P With Extension hread P With Extension rilamp P With Extension hread " # Without Extension hread RJ " # Without Extension rilamp " # Without Extension hread SMS " # Without Extension rilamp ½" # Without Extension rilamp " # Without Extension hread P Without Extension rilamp " # With Extension rilamp P With Extension rilamp " # Without Extension rilamp ½" # Without Extension rilamp " # Without Extension Electrical onnection ½ P M X, Pg, V in O psi psi ORing Mateiral una Vin eflon ank dapter Without ank dapter With ank dapter in SS rilamp Without rilamp With rilamp in SS ZZ Optional tems* Special Options Specify LS S / * YPL MOEL UMER () Material in SS * Leave it blank for no optional items
LS SRY E PRESSURE RSMER W R PROOOL he LS series are gage transmitters for food and other applications where sanitary connections are required. hey are used where clearinplace applications are needed. heir technical specifications are same contained in the L catalog. he specifications for accuracy, drift and temperature effect are the same as that of LL/ L. he process connections can be threaded or clamped (rilamp), allow a quick and easy connection and disconnection from the process. Wetted surface finish is R a as standard. hese series meets recommendations so that the seal surface is free of crevices where food or bacteria can be collected and the finish is extremely smooth. is the most widely accepted sanitary standard in the food, drug and beverage industry. he model LS offers digital R based communication simplifying calibration and providing remote diagnostics. or seal dimensions see page. MOEL SRS SRY E PRESSURE RSMER Range... M kpa kpa kpa iaphragm Material L SS astelloy antalum Monel ill luid K S E O P Q R / Silicone Oil Silicone Oil MO luorolube Oil lycerium and Water Kryx eobee M Propylene lycol Oil / Silicone Oil Local ndicar Without ndicar With ndicar Process onnection Size and Rating () hread " # With Extension hread RJ " # With Extension rilamp " # With Extension hread SMS " # With Extension hread P With Extension hread P With Extension rilamp P With Extension hread " # Without Extension hread RJ " # Without Extension rilamp " # Without Extension hread SMS " # Without Extension rilamp ½" # Without Extension rilamp " # Without Extension hread P Without Extension rilamp " # With Extension rilamp P With Extension rilamp " # Without Extension rilamp ½" # Without Extension rilamp " # Without Extension Electrical onnection ½ P M X, Pg, ORing Mateiral V in O psi psi una Vin eflon ank dapter Without ank dapter With ank dapter in SS rilamp Without rilamp With rilamp in SS ZZ Optional tems* Special Options Specify LS S / * () Material in SS * Leave it blank for no optional items YPL MOEL UMER
LS SRY EREL PRESSURE RSMER he LS series are transmitters, using sanitary flange on the high side. heir technical specifications are same contained in the L catalog. he specifications for accuracy, drift and temperature effect are the same as that of LL/L. he LS series are a transmitters for food and other applications where sanitary connections are required. hey are used where clearinplace applications are needed. he process connections can be threaded or clamped (rilamp), allow a quick and easy connection and disconnection from the process. LS W EXESO Wetted surface finish is R a as standard. hese series meets recommendations so that the seal surface is free of crevices where food or bacteria can be collected and the finish is extremely smooth. is the most widely accepted sanitary standard in the food, drug and beverage industry. or seal imensions see page. LS
LS SRY EREL PRESSURE RSMER MOEL LS SRY EREL PRESSURE RSMER Range. kpa in. kpa. in ote: he range can be extended up. LRL and. URL with small degradation of accuracy.. kpa psi he Upper Range Value must be limited the flange rating.. kpa psi iaphragm Material and ill luid (Low Side) L SS Silicone Oil L SS luorolube Oil astelloy Silicone Oil astelloy luorolube Oil Monel Silicone Oil antalum Silicone Oil antalum luorolube Oil lange, dapter and rain/vent Valves Material (Low Side) SS Wetted ORings Material (Low Side) E V Without ORings (Remote Seal) una Ethylene Propylene eflon Vin rain/vent Position (Low Side) U Without rain/vent (Remote Seal) op otm Local ndicar Without ndicar With igital ndicar Process onnection (Low Side) ¼ P or Manifold (Without dapter) ½ P (With dapter) Electrical onnection ½ P M x, Pg, Local djustment With Local djustment Process onnection Size and Rating () Process onnection Size and Rating () E hread " # With Extension hread RJ " # With Extension rilamp " # With Extension hread SMS " # With Extension hread P With Extension hread P With Extension rilamp P With Extension hread " # Without Extension hread RJ " # Without Extension rilamp " # Without Extension hread SMS " # Without Extension rilamp ½" # Without Extension rilamp " # Without Extension lange Material (Level ap) SS astelloy ill luid (igh Side) () S / Silicone Oil ood rade Silicone Oil MO luorolube Oil lycerium and Water eobee M Propylene lycol Oil / Silicone Oil iaphragm Material (igh Side) V Without ORing una Vin eflon ank dapter Without ank dapter (Supplied by ustumer) With ank dapter SS rilamp Without rilamp With rilamp in SS ZZ J K L M O P Q R hread P Without Extension rilamp " # With Extension rilamp " # With Extension hread " # With Extension hread RJ " # With Extension hread SMS " # With Extension rilamp " # With Extension rilamp P With Extension rilamp " # Without Extension rilamp ½" # Without Extension rilamp " # Without Extension Optional tems* Special Options Specify LS U / () Material in SS * Leave it blank for no optional items. * YPL MOEL UMER
EL ccuracy he overall accuracy* for remote seal and transmitter assembly is given as: able Maximum instrisic error for the remote seal, according diameter and connection. PLLRY PRM YPE " /", ",,, ", ", ccuracy(%)= E S + E Span. E S Remote Seal error (table ) E ransmitter error (mm O)** * he temperature effect is not considered ** onsult the transmitter manual.. m or Level m. m m m m seal seals seal seals seal seals seal seals seal seals seal seals....................... able S. imensions able imensions (in) lass imensions (mm) E X P imensions (mm) E X.................. / /........... / /.... ½................ / /.................... / /......... / /......................... otes: : X umber of lange oles : Raised ace (R) for S Standard Smooth ace ( orm ) for Standard : Only pplicable SR with lush onnection
EL able JS imensions able Pressure Limits lass K K K K K K imensions (mm) E X P / / Pressure Limit @ bar bar bar bar bar bar ote: : X umber of lange oles able JS Pressure Limits able rilamp Pressure Limits lass Pressure Limit @ Pressure Limit @ Pressure Limit @ K K K bar bar bar ½" " " bar bar bar bar bar bar ote: or langes S.a Pressure Limits see able lange Ratings page. able ill luid haracteristics ill luid emperature Limit at P abs > atm ( ) Specific ravity Viscosity (cst) @ / Silicone Oil. MO luorolube Oil. Silicone Oil. / Silicone Oil. eobee M Propylene lycol Oil. lycerium and Water. Syltherm.
SRS MESOS nominal with extension without extension ½" SMS without extension ½" without extension ½" high pressure " without extension " without extension " with extension SMS RJ high pressure SMS RJ high pressure SMS RJ high pressure " without extension " high pressure SRS MESOS Ø Ø E Ø Ø ext..............................................
LS / LS MESOS SRS / LS MESOS nominal Ø Ø E Ø ext. with extension. with extension. without extension. ½" SMS without extension. ½" without extension. ½" high pressure. SMS. RJ... high pressure. SMS. RJ.... high pressure. " without extension. " high pressure. " without extension " with extension...................................
LS MESOS nominal with extension with extension without extension ½" SMS without extension ½" without extension ½" without high pressure " without extension " without extension " with extension SMS RJ high pressure SMS RJ high pressure SMS RJ high pressure " without extension " high pressure LS MESOS Ø Ø E Ø Ø ext..............................................
SR / SRE / SRR MESOS