ABIOSH INT L TECHNICAL CERTIFICATE IN OIL AND GAS SAFETY OPERATIONS (ONSHORE & OFFSHORE)

Similar documents
SEMS II: BSEE should focus on eliminating human error

Process Safety Management Of Highly Hazardous Chemicals OSHA 29 CFR

Introduction to Emergency Response & Contingency Planning

Section J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS

Lockout / Tag out Program

THE BAKER REPORT HOW FINDINGS HAVE BEEN USED BY JOHNSON MATTHEY TO REVIEW THEIR MANUFACTURING OPERATIONS

INTERNATIONAL CERTIFICATE IN OIL & GAS OPERATIONAL SAFETY

CONTRACTOR WHS HAZARD STANDARD HAZARDOUS CHEMICALS EXTERNAL USE ONLY

BODY OF KNOWLEDGE API TES TANK ENTRY SUPERVISOR

BODY OF KNOWLEDGE TANK ENTRY SUPERVISOR CERTIFICATION PROGRAM Revision 2, October 2013

7 Hazard assessment 8 Worker participation 9 Hazard elimination and control

Surface exploration drilling

CONFINED SPACE ENTRY & RESCUE

Risk-Based Process Safety for Upstream Oil & Gas: Put Your Boots on It s Coming! Mark Hansen and Jim Johnstone

OPERATING PROCEDURES

Total s Golden rules

HSE159 Safe Work Practices for Confined Space Entry

Flammable Environments Guideline

CONTROL OF HAZARDOUS ENERGY LOCKOUT/TAGOUT PROGRAM

Hazardous Materials Management Guidelines

LO/TO LOCKOUT/TAGOUT PROGRAM

HEALTH AND SAFETY PROGRAM 201 HOT TAP PERMIT/FILLET WELD REPAIRS

N2 Membrane+ Nitrogen Production Systems for Offshore. Where you are. Where you need to be. We are here too.

BOC Healthcare Training

LOCKOUT/TAGOUT PLAN August 2015

Required Courses. Total Hours 39

SAFETY POLICY AND PROCEDURE MANUAL All Euramax Subsidiaries. Number K-3.0 Welding Safety Procedures

1995 Metric CSJ SPECIAL PROVISION ITEM 7. Legal Relations And Responsibilities To The Public

Module: Permit to work System

SAFETY POLICY AND PROCEDURE MANUAL QUESTIONNAIRE

Hazardous Waste Training Plan. Supersedes: 02/15/16 (Rev.02) Preparer: Owner: Approver: EHS Team Member EHS Team Member EHS Manager

Safety in Petroleum Industry

Date Issued: November 2011 Revision Date: December 2012 Review Date: December 2015 Revision #

STCW Code Table A-V/1-1-1 Specification of minimum standard of competence in basic training for oil and chemical tanker cargo operations

B S Glass Ltd Safety procedures- outsourced Workplaces

Safety Orientation OSHA 5(a)(1) General Duty Clause SAFETY ORIENTATION OSHA Section 5(a)(1) PURPOSE SCOPE

Training Title IDENTIFY OPERATIONAL UPSETS, REVIEW & VALIDATE IN OIL & CHEMICAL PLANTS

SPECIALIZED ONLINE TRAINING COURSE LIST

RESOLUTION MSC.397(95) (adopted on 11 June 2015) AMENDMENTS TO PART A OF THE SEAFARERS' TRAINING, CERTIFICATION AND WATCHKEEPING (STCW) CODE

Working in Confined & Enclosed Space Policy

Minimum standard of competence in advanced training for liquefied gas tanker cargo operations (STCW Reg V/1-2)

BOC Healthcare training

Issue Date 11/21/13 Revision Date 01/04/18 Benzene

Transferring and Storage

Release: 1. UEPOPL002A Licence to operate a reciprocating steam engine

Lockout/Tagout Program

Hazardous Energy Control

Environmental Health and Safety 2018 Catalog CONTENT :: COMPLIANCE :: TECHNOLOGY

Control of Hazardous Energy. Environmental Health and Safety

Omega Safety Training, Inc Hwy 6 North, Ste. 207 Houston, Texas Ph:

Plant Isolation Lock out/tag out Procedure

SAFEWORK PRACTICES EQUIVALENCY PROCEDURE FOR ACCESSING FLOATING ROOF TANKS ON STORAGE TANKS IN SERVICE CAT A-2 SOP #33

Valve Replacement: Using Non-Intrusive Isolation Technology to Minimize Production Downtime

Lockout / Tagout Safety Program

HSE PRACTICES FOR OFFSHORE AND PETROLEUM INDUSTRIES SAFETY PRACTICES NPTEL TUTORIAL: 12

OSHA Compliance Saves Money, See How They Are Connected. Ryan S. Hellman, MS Principal EHS Consultant

SPILL CONTINGENCY AND EMERGENCY RESPONSE PLAN

TSS21 Sealed Thermostatic Steam Tracer Trap

LADDERS FIXED AND PORTABLE

Hazardous Energy Control (Lockout-Tagout)

STATUTORY INSTRUMENTS SUPPLEMENT No. 14 2nd June, 2016 STATUTORY INSTRUMENTS SUPPLEMENT

Gettysburg College. Energy Control Program

Procedure: Pressure equipment safety

In addition to this SOP, the policies and procedures of each operating company will be strictly observed by Rockwater personnel.

A Different Sort Of Knowledge Box

DUQUESNE UNIVERSITY LOCKOUT/TAGOUT PROGRAM

BP OIL -- TOLEDO REFINERY

Lockout/Tagout Program Occupation Safety & Health Standards for General Industry 29 CFR

Method Statement Author

BP OIL -- TOLEDO REFINERY

AUSTRALIA ARGENTINA CANADA EGYPT NORTH SEA U.S. CENTRAL U.S. GULF. SEMS HAZARD ANALYSIS TRAINING September 29, 2011

Reduce Turnaround Duration by Eliminating H 2 S from Flare Gas Utilizing VaporLock Scrubber Technology

INSPECTIONS OF THE LPG ESTABLISHMENTS IN PORTUGAL. Graça Bravo. 26th September 2017

CONTRACTOR WHS HAZARD STANDARD CONFINED SPACE EXTERNAL USE ONLY

EQUIPMENT, AND SUPPLIES. Delivering Environmental, Industrial, and Emergency Solutions

SAFETY AND OSHA GUIDELINE CURRICULUM

TABLE OF CONTENTS PART 2 - CONFINED SPACES

DF1 and DF2 Diffusers

Confined Space. Program Responsibilities

U.S. CONCRETE, INC. SAFETY POLICY and PROCEDURE MANUAL

OPERATIONS SEAFARER CERTIFICATION

Process Safety Management is the application of management principles and systems to the identification, understanding, and control of process

Lockout Tagout Program

Fig.1. September, 2017 An Äager Brand Storagetech tank equipment may saved the entire storage tank refinery of Grupsoil in Colombia.

NZQA registered unit standard version 3 Page 1 of 6

Overview. OPIPOH7 - SQA Unit Code HG1X 04. Operate an Oil and Gas Process (Gas Compression)

EDITION. November 2007 WORK PERMITS HSEW. Health. Safety. Well-being. Environment HSEW A WAY OF LIVING. Standards for professionals, be aware!

Process Safety Value and Learnings Central Valley Chemical Safety Day March 20, 2014

Compliance with Health & Safety legislation

PINNACLE OWNING SAFETY: Zero Fires Zero Loss Incidents 100% Employee Engagement

PART Q CONTROL OF HAZARDOUS ENERGY (LOCKOUT-TAGOUT)

INSTALLATION COMMISSIONING, OPERATION & MAINTENANCE MANUAL

Confined Space Entry Program

SA121, SA122, SA123, SA128 and SA1219 Self-acting Temperature Control Systems (Dial Adjustment)

SITE SAFETY SUPERVISOR (SSS)

Return the completed questionnaire, OSHA 300A Summary form and EMR Rating via e- mail.

Safe Work Practices and Permit-to-Work System

Product Information Report Lockout/Tagout Hazardous Energy Control

Louisiana Energy Workforce Outlook. Stephen R. Barnes, PhD

Hazardous Materials Management. Presented by. James E. Roughton, MS, CSP, CRSP, CHMM.

Transcription:

ABIOSH INT L TECHNICAL CERTIFICATE IN OIL AND GAS SAFETY OPERATIONS (ONSHORE & OFFSHORE) INTRODUCTION The oil and gas industry is a highly risk environment, therefore Safety and Health management is becoming an ever more important aspect in the control and reduction of accidents, incidents, illness and expensive litigation claims. Every day, the oil and gas industry must contend with an array of health, safety and environmental concerns throughout its range of operations. In Oil & Petrochemical industries, the essential purpose of Safety Management regulations is to access the scopes and definitions, areas of specific responsibility of various parties, competencies expected, safety awareness and safe working practices, occupational safety plans, training procedure etc. Drilling rigs and platforms are generally crowded with equipment and machinery, and if there is an accident there are few places to which to escape. Moreover, in locations such as the North Sea, weather conditions can be harsh and unforgiving. Thus, from its very beginning this industry has had to pay particular attention to the safety of the workers and the prevention of catastrophic events. Reducing the number of dangerous occurrences, injuries and hydrocarbon releases remains a top priority and is a key focus of the industry s absolute commitment to continually improving process safety standards, specific systems, programs and processes to manage and monitor activities that affect their safety performance. This course comes in handy as it equips delegates with the technical knowledge, skills and tools necessary to deliver operational excellence in the safe performance of their duties in the Upstream, Midstream, Refining, tank farms and Petrochemical facilities. DURATION: 6 Days + 2 hours exams FEES: N180, 000 including exams, course materials and lunch DATES: 24 th 29 th November TARGET AUDIENCE Health and Safety Personnel Oil and Gas Operatives, Supervisors, Engineers and Managers Individuals directly responsible for a company s accident analysis process Safety committee representatives

Regulators and executives from the Oil and Gas Industry All others with a genuine interest in enhancing the effectiveness of the Health and Safety Function within the Oil and Gas Industry Learning Outcomes: Upon completion student will be able to: - Identify roles and responsibilities of Occupational Safety and Health in the oil and gas workplace - Define Personal Protective Equipment (PPE) and its purpose - Identify when and how to use basic PPE items - Define specialized PPE - Identify the importance of recognizing hazards - Define types of hazards - Evaluate hazards - Identify common workplace hazards (vehicles, lifting, hand tools and equipment, fire, housekeeping) - Identify Oil and Gas Industry hazards (rotating equipment, pipe handling and hoisting, winching/towing, valves, utilities and pipelines) - Identify gas hazards - Define control measures relating to oil and gas hazards - Identify safe work procedures for trenching - Identify safe work procedures for lockout - Identify safe work procedures for safe work permits - Define safety communication techniques Learning Objective Understand Safety and Environmental Management Systems for the offshore oil and gas industries, and learn how to ensure compliance with the new SEMS regime in the worldwide Element 1: Health and Safety Management in the Oil and Gas Industry Managing health and safety risks in the oil and gas Personal Protective Equipment Hazard Recognition & Control Common Workplace Hazards & Control Oil & Gas Industry Hazards & Control Fire and explosion risk in the oil and gas industries Element 2: Operational and Safety Management in Filling Stations

2.1 Petrol Leaks and Spills 2.2 Control of Ignition Sources 2.3 Operating and Emergency Procedure for filling stations 2.4 Maintenance 2.5 Working with Contractors 2.6 Planning the Work 2.7 Safe Work Procedures in Filling Stations 2.7.1 Commissioning 2.7.2 Unloading and Venting 2.7.3 Storing, Handling and Dispensing Of Petroleum Products 2.7.4. Tank Dipping 2.7.5 Handling Hired Trailers and House Floats 2.7.8 Decommissioning Element 3: Storage Tank Farm Operations Types of Tanks Advantages & Disadvantages of Different Types of Tanks Fittings on Different Types of Tanks Safe Operating Practices for Floating Roof Tanks Critical Level of Floating Roof Tanks Recalibration of Tanks - Safety Check-List for Tank Farm Operations Precautionary Measures for Tank Farm Operations Gauging & Tank Quantity Calculation Contamination & Deterioration of Product Tank Cleaning and waste water Loading and unloading of products (Sea and Land transport) Tank Inspection and Safety Emergency and contingency planning Element 4: Safety in refinery and petrochemical plant operation Overview of a Petroleum Refinery Plant operations and safety Product-related risks Physical hazards involving personnel Equipment-related risks Safety in process operations Degassing-inerting: steam, nitrogen, water, Hazard analysis in design and operations

Maintenance hazards and precautions Major shutdown and maintenance Emergency warning system and procedures Element 5 Offshore Safety Major incidents in the offshore industry Safety case and safety reports Safety Considerations In Offshore Installation Design Common offshore Structures Offshore Oil and Gas Hazards and Control Exploration Hazards & Control Rig Hazards & Control Oilfield Trucking Hazards & Control Production & Plant Hazards & Control Element: Hydrocarbon process safety management Principles of shift handover Plant operation and maintenance Elements of Process Safety Management (PSM) Use of contractors and contractors Management Permit-to-work system in an offshore setting Mechanical integrity Hot Work Pre-startup Safety Review Emergency Planning and Response EXAMS: 2 hours exams consisting of 10 questions (2 long questions and 8 short questions) FOR MORE DETAILS/TRAINING ENQUIRIES & BOOKINGS

LAGOS OFFICE 9, Olaiya Street, Alausa-Ikeja, Lagos Tel: 08095643275, 08137901991, 07059747999 Email: info@globalhseconsult.com Website: www. globalhseconsult.com P/HARCOURT OFFICE 2 nd Floor, Rumuokoro St, (Off Aba Rd, ) Rumuomasi Tel: 08165490371, 08095604688 Email: ph@globalhseconsult.com Website: www. globalhseconsult.com