1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1) DF Series Features 1. Compliant with the VESA FPDI-1 Standard Interface Connector The and contact connectors comply with the standard connector specification for the flat panel display interface, which U.S VESA. has selected as FPDI-1. VESA: Video Electronics Standards Association FPDI-1: Flat Panel Display Interface 2. Perfect Mis-insertion Prevention The mating area is designed in a trapezoidal structure, and perfectly prevents the mis-insertion despite the miniature size. 3. Equipped with Easy Lock Mechanism The easy lock mechanism assures the firm insertion and extraction properties as well as the insertion/extraction feeling touch. 4. Smooth Insertion and Extraction Feeling The contact is constructed without the material fragible surface in the contact portion, and provides a smooth insertion and use feeling. 5. Setting Two Type Platings as Standard Two type platings, tin plating and gold plating, are prepared, and either appropriate plating can be selected under cost and use conditions. Structure to Prevent Mis-insertion Lock Mechanism Applications LCD (Liquid Crystal Display), Mobile phone, Note PC A278
Product Specifications Rating Rated Current 0.5A Operating Temperature Range -45~+85ç Note 1. Storage Temperature Range -~+60ç Note 2. Rated Voltage0V AC Operating Humidity Range 40~80% Storage Humidity Range 40~70% Item specification Condition 1. Insulation Resistance 500Mø min. Measured at 0V DC 2. Withstand voltage Neither short or insulation breakdown 0V AC for 1 minute 3. Contact Resistance 50mø max. Measured at 0mA 4. Vibration Electrical discontinuity, 1µ S max. ~55Hz and single amplitude 0.75mm in 3 directions for 2 hours, respectively. 5. Moisture Resistance Contact resistance: 50mø max. Insulation resistance: 500Mø min. Exposed to temperature 40±2ç and humidity 0~5% for 6 hours 6. Temperature Cycle Contact resistance: 50mø max. Insulation resistance: 500Mø min. (-55ç: 30 minutes 5~35ç: minutes 85ç: 30 minutes 5~35ç: minutes) 5 cycles 7. Operating Life Contact resistance: 50mø max: Tin plating: 30 cycles Gold plating: 0 cycles Reflow: According to the recommended Manual soldering: Soldering iron temperature : 8. Resistance to Soldering heat No resion area fusion to degrade performance temperature profile 300ç for 3 seconds Note 1: Temperature rise included when energized. Note 2: This storage indicates a long-term storage state for the unused product before the board mounted. The operating temperature and Humidity ranges are applied to the non-energized state after the connector has been installed to the board. Note 3: The above standards represent this series. Individual formal agreement should be based on the "Specification". Material Product Part Material Finish Insulator Polyamide Beige UL4V-0 Receptacle/Header Contact Phosphor copper Tin plating or gold plating Metal fitting Brass Tin plating Note:The gold plated product contact area is plated with gold, and lead plated with tin-lead. Ordering Information Please determine the specific product. If needed, please select and order products from the product No. as listed on catalog page A280~A284. Receptacle/Header DF # - * S - 1 V (ππ) q w e r t y u i q Series Name : DF r Number of Contacts w Series No. : ~,,, e Type Symbol t Connector Type Symbol Fitting Boss S: Receptacle None P: Header A y Contact Pitch : 1mm B u Contact Type C V: Straight SMT i Contact Surface Finish/Packaging Type (): Tin plating, tube packaging (54): Gold plating, tube packaging (22): Tin plating, embossed tape packaging (5): Gold plating, embossed tape packaging πrefer to page A284 for the bottom entry type (DFL). A27
Receptacle DF- S-1V (**) DF-S-1V (**) DF-S-1V (**) DF-S-1V (**) DF-S-1V (**) DF-S-1V (**) DF-S-1V (**) DF-S-1V (**) DF-S-1V (**) DF-S-1V (**) DF-S-1V (**) DF-S-1V (**) CL540-04-0-** CL540-05-2-** CL540--5-** CL540-07-8-** CL540-08-0-** CL540-0-3-** CL540-00-2-** CL540-01-5-** CL540-02-8-** CL540-03-0-** CL540-03-1-** CL540-04-3-** 8.3.3.3.3.3.3.3.3.3.3 2.3 3 4 5 6 7 8 4 5 6 7 8 7.1 8.1.1.1.1.1.1.1 28.1.1.1.1.1.1.1.1 Note 2 : Please order the embossed tape packaging product per reel. (00 pcs. per reel) Note 3 : are not available. Regarding blank, please contact Hirose sales representative. Tube Packaging Quantity 46 42 3 33 2 28 26 22 18 [Specific No.] **, (**) () : Tin plating, tube packaging (54) : Gold plating, tube packaging (22) : Tin plating, embossed tape packaging (5) : Gold plating, embossed tape packaging. () (54) (22) (5) Receptacle DFA-S-1V (**) CL540-00-1-** DFA-S-1V (**) CL540-00-4-** DFA-S-1V (**) CL540-00-7-** DFA-S-1V (**) CL540-00-0-** DFA-S-1V (**) CL540-00-2-** DFA-S-1V (**) CL540-00-5-** DFA-S-1V (**) CL540-00-4-** DFA-S-1V (**) CL540-00-7-** DFA-S-1V (**) CL540-00-0-** DFA-S-1V (**) CL540-00-2-** DFA-S-1V (**) CL540-0222-2-** DFA-S-1V (**) CL540-00-5-** 8.3.3.3.3.3.3.3.3.3.3 2.3 3 4 5 6 7 8 4 5 6 7 8 7.1 8.1.1.1.1.1.1.1 28.1.1.1.1.1.1.1.1 Note 2 : Please order the emboss packaging product per reel. (00 pcs. per reel) Note 3 : are not available. Regarding blank, please contact Hirose sales representative. Piece/Pack 5 52 47 43 3 34 30 16 [Specific No.] **, (**) (): Tin plating, tube packaging (54): Gold plating, embossed tape packaging (22): Tin plating, tube packaging (5): Gold plating, embossed tape packaging. () (54) (22) (5) A280
Receptacle DFB-S-1V (**) CL540--6-** DFB-S-1V (**) CL540---** DFB-S-1V (**) CL540--1-** DFB-S-1V (**) CL540--4-** DFB-S-1V (**) CL540--7-** DFB-S-1V (**) CL540-07-3-** DFB-S-1V (**) CL540-01--** DFB-S-1V (**) CL540-02-1-** DFB-S-1V (**) CL540-03-4-** DFB-S-1V (**) CL540-03-8-** DFB-S-1V (**) CL540-06-0-** DFB-S-1V (**) CL540-05-3-**.3.3.3.3.3.3.3.3.3.3 2.3 Note 2 : Please order the embossed tape packaging product per reel. (00 pcs. per reel) Note 3 : are not available. Regarding blank, please contact Hirose sales representative. 03.1.1.1.1.1.1.1 Pcs./pack 46 42 3 33 2 28 26 22 18 [Specific No.] **, (**) (): Tin plating, tube packaging (54): Gold plating, embossed tape packaging (22): Tin plating, tube packaging (5): Gold plating, embossed tape packaging. () (54) (22) (5) Header DF-P-1V (**) DF-P-1V (**) DF-P-1V (**) DF-P-1V (**) DF-P-1V (**) DF-P-1V (**) DF-P-1V (**) DF-P-1V (**) DF-P-1V (**) DF-P-1V (**) DF-P-1V (**) DF-P-1V (**) CL540-06--** CL540-07-1-** CL540-08-4-** CL540-0-7-** CL540-00-6-** CL540-01--** CL540-02-1-** CL540-03-4-** CL540-04-7-** CL540--0-** CL540-04-4-** CL540-08-1-**.3.3.3.3.3.3.3.3.3.3 2.3 Note 2 : Please order the emboss packaging product per reel. (00 pcs. per reel) Note 3 : are not available. Regarding blank, please contact Hirose sales representative. 03.1.1.1.1.1.1.1.1 28.1.1.1.1.1.1.1.1 Piece/Pack 46 42 3 33 2 28 26 22 18 [Specific No.] **, (**) (): Tin plating, tube packaging (54): Gold plating, embossed tape packaging (22): Tin plating, tube packaging (5): Gold plating, embossed tape packaging. () (54) (22) (5) A281
Header Without metal fitting DFA-P-1V (**) CL540-0016-0-** DFA-P-1V (**) CL540-00-3-** DFA-P-1V (**) CL540-0018-6-** DFA-P-1V (**) CL540-00--** DFA-P-1V (**) CL540-00-8-** DFA-P-1V (**) CL540-00-0-** DFA-P-1V (**) CL540-0022-3-** DFA-P-1V (**) CL540-00-6-** DFA-P-1V (**) CL540-00--** DFA-P-1V (**) CL540-00-1-** DFA-P-1V (**) CL540-02-5-** DFA-P-1V (**) CL540-0026-4-**.3.3.3.3.3.3.3.3.3.3 2.3 03.1.1.1.1.1.1.1.1 28.1 Note 2 : Please order the emboss packaging product per reel. (00 pcs. per reel) Note 3 : are not available. Regarding blank, please contact Hirose sales representative. Pcs./pack 5 52 47 43 3 34 30 16 [Specific No.] **, (**) () : Tin plating, tube packaging (54) : Gold plating, tube packaging (22) : Tin plating, embossed tape packaging (5) : Gold plating, embossed tape packaging. () (54) (22) (5) Without metal fitting Header Without metal fitting DFB-P-1V (**) CL540-04-7-** DFB-P-1V (**) CL540-05-0-** DFB-P-1V (**) CL540-06-2-** DFB-P-1V (**) CL540-07-5-** DFB-P-1V (**) CL540-08-8-** DFB-P-1V (**) CL540-08-6-** DFB-P-1V (**) CL540-00-0-** DFB-P-1V (**) CL540-01-2-** DFB-P-1V (**) CL540-02-5-** DFB-P-1V (**) CL540-04-0-** DFB-P-1V (**) CL540-02-0-** DFB-P-1V (**) CL540-06-6-**.3.3.3.3.3.3.3.3.3.3 2.3 03.1.1.1.1.1.1.1 Note 2 : Please order the emboss packaging product per reel. (00 pcs./reel) Note 3 : are not available. Regarding blank, please contact Hirose sales representative. Pcs./pack 46 42 3 33 2 28 26 22 18 [Specific No.] **, (**) () : Tin plating, tube packaging (54) : Gold plating, tube packaging (22) : Tin plating, embossed tape packaging (5) : Gold plating, embossed tape packaging. () (54) (22) (5) Without metal fitting A282
BRecommended PCB Footprints, with boss Without metal fitting, with boss Metal fitting, without boss Note 1 : If the pattern is included in the shaded area and not treated with resist, it could touch the connector contact. Note 2 : Please refer to each product size pattern for the universal size on the above patterns (A, B, C, D...). BApplication Pattern BTube Size Common to Receptacle and Header Board Board Note 1 : The board to board size 4.3mm in the pattern does not include the soldering paste thickness. BEmbossed Carrier Tape Dimensions Unreeling direction Product Type Size DF-*S/P-1V DFA-*S/P-1V DFB-*S/P-1V Number of Contacts ~, ~ ~, ~, Unit:mm A B C D E.5.4 28.4.2.4 44 40.4.2 44.4 16.5 16.4.5.4 28.4.2.4 44 40.4.2 44.4.5.4 28.4.2.4 44 40.4.2 44.4 A283
Bottom Entry Header [Specific No.] **, (**) (): Tin plating tube packaging (): Gold plating embossed tape packaging Tube Packaging Spec. Spec. HRS NO. Number of Contacts A B C D Quantity (2) () DFL-P-1V (**) CL540-02-7-**.64.4 22 Note 2 : Please order the embossed tape packaging product per reel. (00 pcs. per reel) Note 3 : The vacuum area on the embossed tape product utilizes the connector case surface. However, it is necessary to check the previous vacuum, because the surface isn't always plain. BRecommended PCB Footprints BApplication Pattern Board Board Board punching area Note : The 2.mm board to board size does not include the soldering paste thickness. Note : The shaded area indicates the through-hole area. BTube Size BEmbossed Carrier Tape Dimensions Product Type Size Number of Contacts A B C D DFL-P-1V 28.4.2.4 A284
BPrecautions for Use 1. Recommended Temperature Profile (SMT) Temperature IR reflow condition Preheating area 0ç for 0~0 seconds Soldering area 5±5ç for seconds max. Maximum 2ç Min for ~30 second Preheating area Soldering area Time Note 1 : Maximum twice action is allowed under the same condition. However, the interval between the first process and second actions must be maintained at the room temperature. Note 2 : The temperature indicates the board surface temperature in the connector lead area. 2. Recommended Manual Soldering Condition (SMT) Soldering iron temperature: 20±ç, Soldering time: Within 2 seconds 3. Recommended Screen Thickness (SMT) 0.mm 4. Board Warp(SMT) Maximum 0.03mm in the connector center area, based on both connector edges. 5. Cleaning Condition Refer to the "Nylon Connector Instruction Manual". 6. Cautions Avoid retaining the board with the connector only, and fix the board by any other means than the connector. Where the board is not mounted, the insertion or extraction will cause damage or deformation in contacts. Excessive scoop insertion or extraction may result in damage. In the manual soldering process, don't carry out flux coating which will cause a flux blister on the connector. The color phase of this product may be slightly different from that of the forming product according to the manufacturing lot. However, the difference doesn't affect the performance. A285