HAFT LINEUP

Technology uperior Modulus Graphite Innovative Multi-Layered Quadraxial OF sheet provides unlimited design possibilities for graphite shafts Our incomparable QUADA technology is achieved with unique Quadraxial OF sheets. The Quadraxial OF sheet enhances stability in the circumferential direction, dramatically reducing variability of shaft movement throughout the swing, and improving the smash factor. This technology enables various bold design possibilities for graphite shafts. The extra-high modulus degree graphite sheet with the QUADA technology enables both a Quick but Constant esponse shaft and a unique Power Multiplying effect. Our latest &D has developed new and efficient methods of piling the Quadraxial OF sheets to partially control the rigidity of the shaft which further improves golf shaft performance. 01 The Fire Express series utilizes 40t or higher modulus graphite sheets. We apply the most appropriate choices of those high or extra-high modulus graphite materials to each model so that the shaft movement throughout the swing plane is controlled effectively. ince 2009 all Fire Express shaft series have incorporated NANOALLOYTM by TOAY. The combination of NANOALLOYTM and our superior modulus graphite material enables ideal synergy effects to maximize distance performance of our shafts. NANOALLOYTM is a trademark of TOAY INDUTIE, INC. 02

Fire Express B for Woods Another Level in Distance Performance Four QUADA Assist functions effectively support an exhilarating driving performance The awesome driving performance of Fire Express rises to another level. The Fire Express B has been developed to enable both further distance and a constant controllability. Four QUADA Assist functions accelerate the club speed as well as concentrate the swing energy at impact. Each function of QUADA Assist results in constant and smooth turn of the shaft from the top of the swing producing an exhilarating and solid feel at impact. As a result, both impact speed and smash factor are drastically improved. The B series effectively controls club face turn throughout the swing so that players can intentionally impart various trajectories. The Quadraxial OF sheets are applied partially at the butt and the middle of the shaft and an additional Quadraxial OF sheet is layered on the top, the entire length of the shaft. The rigidity of each part is effectively designed to enable stable release of the shaft. It contributes increased swing speed and smash factor at impact. The middle part of the shaft is designed to flex so as to store swing energy. This Energy torage Zone effectively provides a stable swing tempo yet increases swing speed before impact. The balance point of each B shaft is designed to be located around the butt area. This counter balance weight design helps players to keep a steady swing plane and a comfortable swing tempo. The high tensile graphite T1100G newly developed by TOAY is adopted on the straight layer. This high strength and modulus carbon graphite saves weight while keeping the shaft solid. The NANOALLOY TM technology material is additionally layered to improve the resistance of the shaft on impact while keeping a comfortable feel. NANOALLOY TM is a trademark of TOAY INDUTIE, INC. Fire Express B 5 53 4.8 4.7 4.6 1168 / 46 55 8.50 56 Fire Express B 6 Fire Express B 7 64 75 3.5 3.4 3.3 3.2 2.4 2.3 2.2 65 1168 / 46 66 8.50 68 1168 / 46 77 8.50 79 15.40 15.50 15.70 15.80 15.90 16.00 16.10 * of parallel tip: 50mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with a 198g clubhead and a 45 inch length of golf club for reference (measured under the &A method). 234 242 250 252 260 268 276 262 270 278 03 04

Fire Express MA WBQ for Woods Fire Express MA WBQ 55 61 62 63 64 4.3 4.2 1181 / 46.5 8.50 3.9 15.70 15.80 234 242 250 260 Controlled and a olid Trajectory for further distance Our innovative Quadraxial OF sheets are lavishly applied to the Fire Express MA WBQ. In addition to the Quadraxial OF sheet layered the entire length of the shaft, another Quadraxial OF sheet is applied on the butt. This Doubling of the Butt Quadraxial OF sheet (WBQ) construction effectively controls the shaft response before impact even though the shaft is designed to be flexible. Players can feel comfortable flex as well as positive acceleration to carry the ball further. MA WBQ 55 is designed to move the tip of the shaft thereby accelerating swing speed before impact. MA WBQ 65 employs a table Tip to enable a constant release of the shaft which effectively increases ball speed at impact due to synergies with the WBQ construction. MA WBQ 75 has a reinforced Metal-Fiber Tip to reduce torque. A combination with WBQ construction enhances the stability of shaft behavior resulting in a solid and consistent driving performance. Fire Express MA WBQ 65 PO Fire Express MA WBQ 75 PO 68 77 3.4 2.9 2.8 2.7 2.6 3.3 1168 / 46 8.50 69 3.2 70 3.1 78 1168 / 46 79 8.50 80 15.20 15.30 15.40 15.50 * of parallel tip: 50mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with a 198g clubhead and a 45 inch length of golf club for reference (measured under the &A method). 250 258 266 274 282 260 268 276 284 05 06

Fire Express TP-V This model was formerly labeled POTO TYPE. for Woods The Ideal Choice for trong Hitters requiring a quick transition The Fire Express TP-V is designed to secure rigidity on the tip and the middle of the shaft while the butt is relatively flexible to control excessive acceleration. trong hitters of the ball, whose swing is compact and sharp at the transition, can keep a steady swing tempo as well as feel a solid impact. This results a piercing middle trajectory with less spin rate for great carry and roll. FireExpress TP-V 65 PO FireExpress TP-V 75 PO 68 2.9 2.8 2.7 2.6 76 1168 / 46 8.50 78 3.7 3.6 3.5 3.4 3.3 1168 / 46 8.50 69 71 15.20 15.30 15.40 15.50 250 258 266 274 282 260 268 278 288 * of parallel tip: 50mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with a 198g clubhead and a 45 inch length of golf club for reference (measured under the &A method). 07 08

Fire Express for Woods The original Fire Express series will be sold out in autumn 2014. Fire Express 55 4.4 4.3 4.2 58 1194 / 47 8.50 59 15.00 15.10 Low- 242 248 254 Fire Express 65 A urge of ed Hot Energy at Impact Extra-high modulus graphite achieves a dramatic response The original Fire Express employs superior modulus graphite material in combination with both Quadraxial OF sheet and a nanotech resin sheet. Its dramatic but stable response maximizes swing speed before impact resulting in a piercing high trajectory. Fire Express 75 PO 67 3.8 3.7 3.6 3.0 2.9 2.7 1194 / 47 8.50 69 78 1194 / 47 8.50 82 15.30 15.70 Low- 252 260 268 262 270 290 * of parallel tip: 50mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with a 198g clubhead and a 45 inch length of golf club for reference (measured under the &A method). 09 10

Fire Express LD60 Fire Express LD60 will be sold out in autumn 2014. Exclusively Designed for Over Drivers for maximum swing speed and that real smash factor The Fire Express LD60 allows over length drivers to attain maximum swing speed with an accurate impact. This shaft reduces uncomfortable feeling of unwanted movement at the top of the swing typically experienced with an extra length shaft. Two shaft types are offered in this model to match different swing tempos. The Type K is designed for a somewhat quick release just prior to impact and the Type for a moderate swing tempo. Both versions of LD60 reduce inconsistent toe down and movement typical of over length shafts to maintain that sought after smash factor. Fire Express LD60 wing Tempo Fast Moderate Model Type K Type F1 F2 F3 F4 3.9 4.0 4.2 4.3 * of parallel Tip: 50mm (Note: Tip diameter is measured before coating) ** Characteristic Frequency is measured with a 193g clubhead and a 47 inch length of golf club for reference (measured under the &A method). for Woods 1194 / 47 61 8.50 15.10 Low- 260 254 248 Fire Express LIGHT45 for Woods Extra Light haft with built in distance-gain technology The Fire Express LIGHT45 is designed to give optimum performance for all swing speeds. The LIGHT45 shaft is designed to prevent the unreliable movement often experienced with extra light weight shafts and maintain a consistent ball speed at impact. This model enables a higher launch angle for moderate swing golfers and a powerful piercing trajectory for golfers with an average swing speed. Fire Express LIGHT45 F0 F1 F2 50 49 47 4.6 4.7 4.8 1168 / 46 8.50 15.10 15.00 Low- * of parallel Tip: 50mm (Note: Tip diameter is measured before coating) ** Characteristic Frequency is measured with a 193g clubhead and a 45 inch length of golf club for reference (measured under the &A method). 232 224 218 11 12

Fire Express FW Color (2) was formerly launched as POTO FW. Color (1) will be sold out in autumn 2014. (1) (2) (3) for Fairway Woods Incomparable Hi-Performance haft exclusively designed for Fairway Woods The Fire Express FW shafts provide every answer for performance required from fairway woods. With a responsive but steady shaft movement, players can make a solid contact from a variety of lies with the confidence of a long carry and high accuracy expected from each numbered fairway wood. Three weight models enable a choice of heavier and/or stiffer shaft for higher lofted woods. Three colors are available to match your driver and irons. Color Variations (1) (2) (3) 55 65 75 N/A Fire Express FW 55 Not available for color option (2). 4.5 4.4 1105 / 43.5 61 8.50 15.20 Fire Express FW 65 Fire Express FW 75 PO 79 1105 / 43.5 8.50 80 2.7 82 15.50 * of parallel tip: 70mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with a 218g clubhead and a 42.5 inch length of golf club for reference (measured under the &A method). 3.0 69 1105 / 43.5 3.6 8.50 15.40 71 250 258 262 270 278 270 278 288 298 13 14

Fire Express FW Type-D for Fairway Woods Fire Express FW Type-D 55 3.5 3.4 60 1105 / 43.5 63 8.50 15.50 250 266 Enhanced Distance Performance enables aggressive Fairway Wood play The WBQ (Doubling of the Butt Quadraxial OF sheet) construction adopted for the Fire Express FW Type-D enhances shaft response before impact while maintaining stable shaft behavior at the transition. The FW Type-D enables maximum carry and roll with a piercing middle trajectory due to a lower spin rate. An ideal fairway wood combination is available with the FW Type-D shafts for and woods for extra distance and the Fire Express FW shafts for short woods for pinpoint accuracy. Fire Express FW Type-D 65 Fire Express FW Type-D 75 PO 68 70 72 78 2.7 2.6 2.5 2.5 2.4 2.3 2.2 1105 / 43.5 8.50 80 1105 / 43.5 82 8.50 84 15.70 15.70 15.80 15.90 * of parallel tip: 70mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with a 216g clubhead and a 42.5 inch length of golf club for reference (measured under the &A method). 257 265 281 270 278 288 296 15 16

Two Choices of Fire Express FW eries by shaft feel, preferred trajectory and play style Fire Express FW Fire Express FW Type-D p.13 p.15 Enhanced rigidity on the butt. eliable shaft release before impact. dle trajectory with a lower spin rate. Extra distance with carry and roll. Comfortable solid feel on the butt. mooth transition from the top of swing. Less toe down for a better smash factor. Controllability for consistent distance and accuracy. ecommended Fairway Woods ettings wood wood hort woods E xtra Distance D istance and Control More Distance: Type-D Type-D Type-D Type-D Type-D FEFW More Control: Type-D FEFW FEFW B etter Control FEFW FEFW FEFW Type-D =Fire Express FW Type-D FEFW =Fire Express FW 17 18

Fire Express UT UT70 and UT100 were formerly labeled POTO TYPE. for Hybrids Fire Express UT 70 72 2.9 2.8 2.7 1041 / 41 73 9.10 74 15.40 15.50 Low- 240 250 258 Indispensable haft for Your Hybrid Clubs Three choices of weight offer more options for your hybrid choices With the Fire Express UT, there are no more missed shots caused by the quick response of normal graphite shafts. Our design concept focuses on how the hybrid shaft produces a steady response, better controllability and an appropriate trajectory for each numbered hybrid in order to carry the ball unerringly to the chosen target. The UT70 employs a high trajectory with a comfortable flexibility. The UT85 offers a reliable response with a predictable impact. The UT100 is designed to match a hybrid set coupled with steel shaft irons of over 100g. A choice of shaft weight similar to or lighter than iron shafts makes it possible to have an ideal set of clubs in your golf bag. The three weight variations offered in this series allow you to change the shaft weight for each numbered hybrid. Fire Express UT 85 Fire Express UT 100 85 89 92 105 107 2.6 2.5 2.4 2.4 2.3 1041 / 41 9.10 1041 / 41 9.10 15.80 15.90 16.00 15.30 * of parallel tip: 70mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with a 233g clubhead and a 40.0 inch length of golf club for reference (measured under the Heel-End method). 252 265 280 295 310 19 20

Fire Express DGL DGL115 and DGL120 were formerly labeled POTO TYPE. for Irons Optimal Graphite Iron hafts for a rounded game The Fire Express DGL115 and 120 are designed to give a high launch angle to extend the distance between each numbered iron and allow a direct shot to the pin particularly on long iron play. The DGL is designed as a solid shaft but without a heavy or stiff feel typical of heavy graphite iron shafts so that players can, by controlling the shaft, play shots with intended varying trajectories. The light weight DGL90 is an ideal choice for a moderate swing speed. The rigidity on each part of the shaft is designed respectively to realize smooth transition and a solid impact. A progressive weight combination of DGL90 for long irons and DGL115/120 for middle and short irons provides further options in your set of clubs. Fire Express DGL 115 118 2.0 1.9 1.8 1.7 9.18 15.40 15.50 350 () Fire Express DGL 90 / Fire Express DGL 120 :93 :95 :95 :98 :2.9 :2.8 :2.8 :2.7 :2.7 :2.6 :2.6 :2.5 9.40 :15.70 :15.80 :15.80 :15.90 :15.90 :16.00 High- :330 () :350 () 120 1.9 1.8 1.7 1.6 9.18 15.50 15.70 370 () * of parallel tip: 45mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with an assembled club for reference and may vary depending on clubhead weight, shaft length, etc. * of parallel tip: 40mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with an assembled club for reference and may vary depending on clubhead weight, shaft length, etc. 21 22

Fire Express MA-Iron WBQ 95 for Irons Confident Iron Play with a combination of steady response and consistent impact The Fire Express MA-Iron WBQ 95 is an ideal option for players who use a light weight steel shaft of 95-100g. This model adopts our unique WBQ (Doubling of the Butt Quadraxial OF sheet) construction with the performance well proven on our wood shafts. It enables both the smooth transition and acceleration of the shaft just prior to impact. The controlled and reliable movement of this iron shaft is forgiving of off center shots and provides consistent carry with the ideal trajectory expected of each numbered iron. Fire Express MA-Iron WBQ 95 ///,, 92 96 98 100 2.8 2.7 2.6 2.5 2.7 2.5 * of parallel tip: 40mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with an assembled club for reference and may vary depending on clubhead weight, shaft length, etc. 2.6 2.4 2.5 2.3 2.4 93 98 100 102 2.6 2.5 2.4 2.3 2.2 9.40 15.00 15.10 15.20 15.20 15.30 Kick Point :325 () :335 () :345 () :355 () 23 24

Fire Express Wedge This model was formerly labeled POTO TYPE. for Wedges Exclusively Made for Wedge Play with incomparable club face control The Fire Express Wedge is the ultimate wedge shaft for your short game. The face turn and toe down throughout the swing is effectively controlled without excessive rigidity of the tip. This model helps the wedge head return to the addressed angle so that players can manage different trajectories and distances from various lies. You can make low trajectory spinning shots or lob shots with a relaxed and compact swing. Fire Express Wedge 115 120 118 120 1.7 1.6 9.18 15.70 * of parallel tip: 40mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with a 302g clubhead and a 35.25 inch length of golf club for reference (measured under the Heel-End method). 372 392 Fire Express PT130 for Putters Exclusively Designed for Putters to break the graphite/distance paradigm Breaking the preconception that Graphite shafts are for distance shots, the Fire Express PT130 is exclusively designed for putters. We believe that the correct graphite shaft is critical for consistent distance, accurate impact and the stroking of the ball along an intended line. All of these factors contributed to the creation of the PT130 shaft. The weight of the shaft is designed for a steady stroke, the extra low torque for accurate impact and the controlled rigidity for a consistent strike. Finally, the distinctive feel of the graphite shaft imparts a delicate touch and reduces off center hits. Fire Express PT130 * Tip diameter is measured before coating. 137 1.1 9.20 15.80 PT130 is only for putter heads and not to be used on any other type of clubs. 25 26

Impact eries A haft that is ible yet ed for a natural body-turn swing Heavy shafts are stiff. The Impact series is developed to defy this conventional shaft design theory. Many golfers choose a shaft that is too light for their swing in their quest to find a shaft with their preferred flexibility. Our &D shows that a shaft of the appropriate weight improves swing tempo and enables players to maintain an ideal swing plane. The unified flex of the Impact series shafts suit a broad range of swings from female to long driving contest players. This series has driver, fairway wood and iron shafts to allow you to make up your full set of clubs with the same comfortable feel on each club. Impact for Drivers Impact FW for Fairway Woods Unified * of parallel tip: 50mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with a 198g clubhead and a 45 inch length of golf club for reference. Unified 1168 / 46 66 3.7 8.50 15.50 205 * of parallel tip: 75mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with a 216g clubhead and a 42.25 inch length of golf club for reference. 1117 / 44 64 4.0 8.50 15.50 210 Impact ION for Irons Unified 66 15.00 4.3 9.40 14.90 245 () * of parallel tip: 40mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with an assembled club for reference and may vary depending on clubhead weight, shaft length, etc. 27 28

ED ZONE benefit eries ible haft Design Accelerates wing peed to gain distance with a natural swing This series is designed to be flexible so as to accelerate swing speed before impact without any extra effort. The comfortable feeling flexible shaft enables a natural golf swing for every type of golfer. A variety of flexible models are available for female, senior and junior golfers. Fairway wood shafts are also designed flexible in order to launch the ball high to achieve consistent carry. ED ZONE benfit ED ZONE benefit models are still available in limited quantities. Visit our website for current availability. 210 218 225 47 48 49 51 4.9 1168 / 46 4.8 8.50 4.5 15.30 15.40 210 218 223 236 * of parallel tip: 50mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with a 195g clubhead and a 45 inch length of golf club for reference (measured under the Heel-End method). ED ZONE benfit FW ED ZONE benefit FW models are still available in limited quantities. Visit our website for current availability. 60 1105 / 43.5 63 4.1 8.50 65 15.70 240 247 254 * of parallel tip: 85mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with a 214g clubhead and a 42.25 inch length of golf club for reference. 29 30

QUADA ION HAFT Line up Variety of Choices for every golfer chasing a high trajectory to the target This iron shaft series features characteristic flexibility of graphite shaft which is not available in steel shafts. The Quadraxial OF sheet is utilized on this series to carry the ball further in a high trajectory. A variety of different weight models from extra light (502i) through to over 100g (100i) are available. These are combined with the most appropriate flex to make your customized iron set. Long iron shafts are also applicable for hybrids.* * Check if the tip diameter fits the hybrid hosel. 502i #1 #2 #1 #2 1016 / 40.0 652i / 1016 / 40.0 :67 :70 4.1 3.2 3.0 2.9 2.5 * of parallel tip: 40mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with an assembled club for reference and may vary depending on clubhead weight, shaft length, etc. 9.40 * of parallel tip: 50mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with an assembled club for reference and may vary depending on clubhead weight, shaft length, etc. 15.40 49 9.40 15.50 268 () 4.0 3.9 :281 () :299 () 852i #1 #2 100i #1 #2 1016 / 40.0 1016 / 40.0 83 105 103 102 100 2.6 2.5 2.4 2.3 2.6 2.5 2.4 2.3 * of parallel tip: 50mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with an assembled club for reference and may vary depending on clubhead weight, shaft length, etc. A half inch tip cut may gain a frequency of approx. 8cpm. * of parallel tip: 50mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with an assembled club for reference and may vary depending on clubhead weight, shaft length, etc. 9.40 9.10 15.30 15.20 15.10 15.30 15.20 292 () 100i is still available in limited quantities. Visit our website for current availability. 324 () 752i 100i PO 100i PO is still available in limited quantities. Visit our website for current availability. #1 #2 1016 / 40.0 75 3.1 9.40 15.50 285 () * of parallel tip: 50mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with an assembled club for reference and may vary depending on clubhead weight, shaft length, etc. A half inch tip cut may gain a frequency of approx. 8cpm. PO #1 #2 1016 / 40.0 106 105 103 101 2.6 2.5 2.4 2.3 * of parallel tip: 50mm (Note: Tip diameter is measured before coating) ** Characteristic frequency is measured with an assembled club for reference and may vary depending on clubhead weight, shaft length, etc. 9.10 15.40 15.20 340 () 31 32

afety Warning: Our shafts are designed and produced to be assembled as golf clubs. Do not use the shafts for any other purpose. It is strongly recommended for safety reasons that assembling and fitting should be done by assembling or fitting professionals, namely expert workshops, golf shops or club manufacturers. COMPOITE TECHNO CO., LTD. and its authorized distributors, dealers and workshops are not responsible for any breakage of the golf clubs assembled, altered and/or adjusted by end-users. As the butt of the club is a very sensitive design, it is also strongly recommended that any exchange of grips also be done by the aforementioned fitting professionals. The coating may tarnish during use but this does not affect the rigidity and performance of the shaft. hafts should at all times be handled carefully so as not to make any scratches or other damage to the shafts which may cause future brakeage of said shaft. This is irrespective of the size of scratches or damage. If any damage or scratches are observed on the shaft, it is strongly recommended that you have the shaft examined by a fitting professional for a safety check. Do not apply any force, push and/or bend the shaft to check its flexibility as it may causes serious damage which may not be readily observed at the time and after. It may damage the performance and durability of shafts if they are left in a very hot and humid environment. If a shaft is broken, do not touch the breakage and carefully keep the broken part isolated from yourself and others as carbon graphite fibers may easily pierce your hand or body. To avoid damage, the golf clubs should be removed from your golf bag vertically and do not draw the clubs out of the bag against the frame of the bag. To avoid damage, apply a head cover to your golf clubs to protect the shafts from damage by other club heads. Our limited warranty does not cover the shaft on a second hand golf club as there may be damage to the shaft caused by the previous owner which is not visible to the naked eye. Any material damages caused to any person or property by a problem with a shaft on a second hand golf club are the responsibility of the user/purchaser. Fitting Instructions: -The parallel length on the shaft tip differs for each model. Note the length of the parallel section and the hosel depth if tip trimming is required. After cutting the tip, the parallel tip section should be the same length as or longer than the hosel depth. Cutting too much of the tip will damage the performance and durability of the shaft and is not covered by our limited warranty. -Do not damage the graphite layer when sanding the tip for assembling. Carefully remove the coating only. Notices for ecycled hafts: It is strongly NOT recommended to use recycled shafts removed from golf clubs. ecycled shafts are not covered by our limited warranty. The heat and force applied to the shaft to remove it from a club head may affect graphite and resin layers of the shaft and materially affect the durability and safety which are inherent in the original design. Golf shops, retailers, workshops and end-users are responsible for any damage caused to any person and/or other material damages by such recycled shafts. Notes: - pecifications on this brochure are the numeric values designed for each model for reference purposes and may vary within our tolerance standard. -Pictures on this brochure may differ from actual products due to printing reproduction. -The design and specifications of each model are subject to change without notice. -eproduction or appropriation of text, images and photographs from this brochure is prohibited. Head Office Umeda quare Bldg. 13F, 12-17, Umeda 1-chome, Kita-ku, Osaka-shi Osaka 530-0001, Japan Email: info@compo-t.com 2014 COMPOITE TECHNO CO., LTD. All rights reserved..,. 33 34