Grove TMS0E Product Guide Features 12,6 m - 39 m (41 ft - 128 ft) four-section full power MEGAFORM boom 10 m 17 m (33 ft 56 ft) manual offset bifold swingaway 2 x 20 ft intermediate lattice inserts 10 886 kg (24,000 lb) counterweight with hydraulic removal system Cummins QSM 2, six-cylinder after cooled 300 kw (2 hp) engine Front and rear air ride suspension
Features MEGAFORM TM boom The Grove MEGAFORM boom shape eliminates weight and increases capacity compared to conventional shapes. Suspension system Standard front and rear air ride suspension provides a comfortable ride at maximum speed of km/h ( mph). Lattice extension For improved up and over reach, a bifold lattice extension is available on the TMS0E and manually offsets from to 4. Cummins diesel carrier engine The electronically controlled Cummins diesel engine provides plenty of power, on highway and at the jobsite.
Contents Specifications 4 Dimensions 7 Travel proposals 8 Working range 9 Load charts 11 Load handling 35
Specifications Superstructure Boom 12,5 m - 39 m (41 ft - 128 ft) four section, full power MEGAFORM boom. Maximum tip height: 41,1 m (135 ft). Boom nose Four nylatron sheaves, mounted on heavy duty tapered roller bearings with removable pin type rope guards. Quick reeve boom nose. Removable auxiliary boom nose with removable pin type rope guard. Boom elevation Single lift cylinder with safety valve provides boom angle from -3 to +78. Offsettable lattice extension 10 m - 17 m (33 ft - 56 ft) bifold lattice swingaway extension, manual offsettable at 0, 20 and. Maximum tip height: 58,2 m (191 ft) * Optional lattice extension Two 6,1 m (20 ft) inserts for use with lattice swingaway extension to increase length up to 23,2 m (76 ft) or 29,3 m (96 ft). Maximum tip height:,1 m (230 ft) Load moment and anti-two block system Standard Graphics Display load moment and anti-two block system with audio-visual warning and control lever lockout. These systems provide electronic display of boom angle, boom length, radius, tip height, relative load moment, maximum permissible load, load indication and warning of impending two-block condition. The standard Work Area Definition System allows the operator to pre-select and define safe working areas. If the crane approaches the pre-set limits, audio-visual warnings aid the operator in avoiding job-site obstructions. Cab All aluminum constructed cab with acoustical lining, hydraulically tiltable (0 to +20 ). Includes tinted safety glass, adjustable operator s seat, sliding windows in side and rear, hinged skylight with wiper, skylight sunscreen. Other features include hot water heater/ defroster, armrest integrated dual axis crane controls, and ergonomically arranged instrumentation. Swing Swing Axial piston fixed displacement motor and planetary gear box. Infinitely variable to 1.7 rpm. Holding brake and service brake. Counterweight 3629 kg (00 lb) consisting of various sections with hydraulic installation/removal system. *Optional Heavy Lift package consisting of (1) 1814 kg (00 lb) and (1) 2722 kg (00 lb) section, for a total of 81 kg (18,000 lb). *Optional XL counterweight package consisting of (1) 2721 kg (00 lb) slab, (1) 1814 kg (00 lb) slab and (2) 1361 kg (3000 lb) wing weights in addition to standard; for a total of 10 886 kg (24,000 lb) of counterweight. Hydraulic system 1 piston and 3 gear type pumps with a total capacity of 678 l/m (179 gpm). Maximum operating pressure, 27,6 MPa (00 psi). Thermostatically controlled oil cooler keeps oil at optimum operating temperature. Tank capacity: 693 L (183 gal) Hoist Main and auxiliary hoist are powered by axial piston motor with planetary gear and brake. Thumb-thumper hoist drum rotation indicator alerts operator of hoist movement. Single line pull: 1st layer: 91 kg (20,2 lb) 3rd layer: 7716 kg (17,010 lb) 5th layer: 66 kg (14,6 lb) 4 *Denotes optional equipment
Specifications Superstructure continued Maximum line speed: 157 m/min (514 fpm) Maximum permissible line pull: 7620 kg (16 0 lb) 6x36 rope 7620 kg (16 0 lb) 35x7 rope Rope diameter: 19 mm (3/4 in) Rope length: 183 m (0 ft) main hoist 1 m (7 ft) auxiliary hoist Rope type: 6 x 36 EIPS IWRC, Special Flexible 35 x 7 Class, Rotation Resistant Maximum rope stowage: 256 m (841 ft) Carrier Chassis Triple box section, four-axle carrier, fabricated from high strength, low alloy steel with towing and tie-down lugs. Outrigger system Four hydraulic telescoping, two-stage, double box beam outriggers with inverted jack and integral holding valves. Quick release type outrigger floats 610 mm (24 in) diameter. Three position setting with fully extended, intermediate (%) extended and fully retracted capacities. Maximum outrigger pad load: 101,0 lb Outrigger controls Located in the superstructure cab and on either side of the carrier. Crane level indicator (sight bubble). Engine Cummins QSM 2 10,8 L diesel Tier 3 (Off Highway EPA Certified) six cylinders, after cooled, 300 kw (2 bhp) (gross) @ 10 RPM. Maximum torque 1898 Nm (10 ft lb) @ 10 RPM. Equipped with engine compression brake, block heater, cold start aid (less canister) and audio-visual engine distress system. Fuel Requirement - Maximum of 00 ppm sulfur content. 379 L ( gal). Fuel tank capacity Transmission Roadranger manual transmission with 11 speeds forward, three speeds reverse. 8 x 4 x 4. Drive Steering Front axles, single circuit, mechanical steering with hydraulic power assist. Turning radius: 45.1 ft. Axles Front: (2) beam-type steering axles, 2,12 m (83.4 in) track. Rear: (2) single reduction drive axles, 1,89 m (74.5 in) track. Inter-axle differential locks. Brakes S-cam, dual air split system operating on all wheels. Spring-applied, air released parking brake acting on rear axles. Air dryer. Suspension Front: Walking beam with air bags and shock absorbers. Rear: Walking beam with air bags and shock absorbers. Tires Front: 445/R 22.5 tubeless, mounted on aluminum disc wheels. Rear: 315/R 22.5 tubeless, mounted on aluminum disc wheels, inner steel. Lights Full lighting package including turn indicators, head, tail, brake, and hazard warning lights. GROVE TMS0E *Denotes optional equipment 5
Specifications Carrier continued Cab One man design, aluminum fabricated with acoustical lining and tinted safety glass throughout. Deluxe fabric covered seat with air adjustment. Complete driving controls and engine instrumentation including tilt telescope steering wheel, tachometer, speedometer, voltmeter, water temp., oil pressure, fuel level, air pressure gauge with A/V warning and engine high temp./low oil pressure A/V warning. Other standard items include hot water heater/defroster, electric windshield wash/wipe, fire extinguisher, seat belt, door lock, air horn, and air conditioning. Electrical system * Optional equipment Auxiliary Lighting and Convenience Package: Includes amber strobe for superstructure and carrier cab, dual boom base mounted floodlights and LMI light bar. Hook blocks Pintle hook (rear) Cross axle differential locks Trailing Boom Package Aluminum outrigger pads Counterweight Packages Tow cable Wind speed indicator Winterfront radiator cover Two 12V maintenance free batteries provides 12 V electrical system. Standard battery disconnect. 104 km/h ( mph) % Maximum speed Gradeability (theoretical) Miscellaneous standard equipment Aluminum fenders with rear storage compartments; dual rear view mirrors; electronic back-up alarm; sling/tool box; tire inflation kit; air cleaner restriction indicator; headache ball stowage; aluminum wheels, event recorder. 6 *Denotes optional equipment
Dimensions R 16 2 ( ) R 16 184 (53 ) R 15 2 ( ) 28 R 13 981 (46 ) R 13 779 OUTSIDE (45 ) CURB TURNING CLEARANCE RADIUS R 44 (15 ) TAIL SWING R 16 4 (54 ) 2618 (8.59 ) OVERALL 2587 (8.49 ) CARRIER MAX. 2312 7315 (7.58 ) (24.00 ) RET. FULLY EXT. (15.42 ) MID EXT. 2117 (6.94 ) FRONT TRACK 32 R 98 (32 ) INSIDE CURB CLEARANCE 17 (6.26 ) REAR TRACK 284 (.93 ) 15 182 (49.81 ) 12 0 (41.34 ) RET. 2200 (7.22 ) ROTATION 4498 (14.76 ) 964 (3.16 ) 3398 (11.15 ) 497 (1.63 ) 2537 (8.32 ) 3426 (11.24 ) 1786 (5.86 ) 16 318 (1.04 ) 635 (2.08 ) STROKE 1264 (4.15 ) 2641 (8.66 ) 13 (13.17 ) 1524 (5.00 ) 1 5639 (18. ) 28 (9.42 ) 11 391 (37.37 ) 873 (2.87 ) 1524 (5.00 ) 2718 (8.92 ) 20 241 (.79 ) 361 (1.18 ) 8 (1.67 ) 526 STROKE (1.73 ) Note: Dimensions shown as mm (ft). Unit configuration kg (lb) Front Rear Gross Basic machine including 128 ft main boom, 56 ft bifold swingaway, main and auxiliary hoists with cable, auxiliary boom nose, air conditioning in both cabs, USt hook block tied to bumper, 10 USt headache ball stowed, zero counterweight, 200 lb driver 19 933 (43,943) 18 9 (,4) 38 441 (84,747) Add 00 lb counterweight pinned to superstructure 18 9 (41,9) 21 298 (46,4) 263 (88,763) Add 10,000 lb counterweight (00 lb on deck/00 lb pinned to superstructure) 21 261 (46,872) 21 729 (47,4) 42 9 (94,776) Add 14,000 lb counterweight (00 lb on deck/00 lb pinned to superstructure) 21 549 (47,6) 23 261 (51,2) 44 9 (98,786) Add 18,000 lb counterweight (00 lb on deck/10,000 lb pinned to superstructure) 20 581 (45,372) 26 0 (57,430) 46 631 (102,2 ) Substitute: Aluminum outrigger pads -3 (-6) -30 (-66) -33 (-72) Remove: 33 ft-56 ft bifold swingaway -13 (-3010) 166 (3) -0 (-2645) USt hook block -2 (-1327) 229 (4) -373 (-823) 10 USt headache ball -3 (-838) 122 (2) -258 (-568) Auxiliary hoist with cable 84 (1) -2 (-530) -156 (-345) Air conditioning - carrier -36 (-) 8 (17) -29 (-63) Air conditioning - superstructure 15 (32) -102 (-225) -88 (-193) Effect per foot of extended boom: -346 (762) 346 (-762) 0 (0) Axle/tire allowable 22 317 (49,200) 27 216 (,000) 49 533 (109,200) Grove TMS0E 7
Travel proposals 2423 mm (7.9') 3620 mm (11.9') 1524 mm (5') CL Front bogie 5639 mm (18.5') Wheelbase 1524 mm (5') 874 mm (2.9') CL Rotation 4521 mm (14.8') 1384 mm (4.5') 7.21 mm (63' -1 3/16") Front 14 779 kg (32,582 lb) Rear 15 437 kg (34,032 lb) Dolly 11 173 kg (24,633 lb) Gross 41 389 kg (91,247 lb) Unit Configuration: 12,5 m - 39 m (41 ft - 128 ft ) boom 10 m - 17 m (33 ft - 56 ft) stowed swingaway Main and auxiliary hoists with cable USt hook block hanging from boom nose 10 USt headache ball stowed in front tray 0 lb of rigging and cribbing Driver 2 axle boom dolly [ 2722 kg (6,000 lb)] No counterweight Air conditioning, both cabs Additions: 3629 kg (00 lb) counterweight stowed on the chassis deck 4536 kg (10,000 lb) counterweight stowed on the boom dolly Front 17 844 kg (39,339 lb) Rear 16 012 kg (35,301 lb) Dolly 15 721 kg (34,9 lb) Gross 49 577 kg (109,299 lb) Counterweight configurations Load chart configurations 3000 lb Auxiliary 00 hoist lb 00 lb 00 lb 00 lb 3000 lb 00 lb 00 lb 3000 lb 0 lb 00 lb X 00 lb 2X 10,000 lb X X 12,000 lb 3X 14,000 lb 2X X 18,000 lb 3X X 24,000 lb 3X X 2X 8
Working range 41.3 ft 128 ft main boom + 33 ft 56 ft lattice extension (Boom deflection not shown) 220 210 200 1 1 20 0 56' EXT 1 33' EXT 1 220 (Boom deflection not shown) Height from ground in feet 1 1 Height from ground in feet 210 200 1 1 1 1 1 1 20 30 30 20 0 56' EXT 33' EXT 128 Boom length and extensions in feet 128 41.3 Boom length and extensions in feet 30 20 10 30 20 10 0 10 20 41.3 78 Max. boom angle 78 Max. boom angle 10 0 0 0 1 1 1 1 1 1 30 20 10 1 1 1 1 1 1 30 20 10 Axis of rotation Axis of rotation Operating radius in feet from axis of rotation Operating radius in feet from axis of rotation 3021 (9-11 ) Dimensions are for largest Grove furnished hook block and overhaul ball, with anti-two block activated. 3021 (9-11 ) Dimensions are for largest Grove furnished hook block and overhaul ball, with anti-two block activated. Grove TMS0E 9
Working range 41.3 ft 128 ft main boom + 33 ft 56 ft lattice extension + 20 ft or ft insert 2 230 20 0 220 210 200 1 1 1 Height from ground in feet 1 1 1 30 Height from ground in feet 2 230 220 210 200 1 1 1 1 1 1 10 20 30 20 30 0 20 128 Boom an dextgension length in feet 128 41.3 Boom an dextgension length in feet 78 Max. boom angle 20 41.3 10 0 30 20 0 10 220 210 200 1 10 1 1 1 1 1 0 30 20 10 78 Max. boom angle Axis of rotation 0 Operating radius in feet from axis of rotation 220 210 200 1 1 1 1 1 1 30 20 10 Axis of rotation Operating radius in feet from axis of rotation 3021 mm [9-11 ] 3021 mm [9-11 ] Dimensions are for largest Grove furnished hook block and overhaul ball, with anti-two block activated. Dimensions are for largest Grove furnished hook block and overhaul ball, with anti-two block activated. 10
41.3 ft - 128 ft 24,000 lb % spread 36 8 9 10 12 15 20 25 30 35 45 41.3 ** 128 +1,000 ++1,000 86,000 147,000 86,000 86,000,0 86,000 86,000 41,000 111,000 86,000 86,000 41,000 39,000 (67.5) (76.5) 87,6 86,000,0 41,000 39,000 38,0 *38,0 *31,9 67,0 67,4 67,2 41,000 39,000 38,0 38,0 31,9 *25,7 *14,0 (44) (54) (69),5,0,7 41,000 39,000 38,0 36,1 31,9 25,7 14,0 (31) (46.5) (.5) (72.5) 38,0 38,7 38,6 38,1 34, 31,3 29,300 25,7 14,0 (37) (49.5) (67.5) 30,300 30,0 30,0 31,5 30,0 27,0 25,6 23,0 14,0 (24) (42) (67.5) (69.5) (71) 24,5 24,0 25,0 26,0 24,0 22,0 21,4 14,0 (33.5) (45.5) (57.5) See 20,0 20,2 21,1 22,0 21,8 20,2 19, 14,0 Note 16 (21.5) (39) (47.5) (66) 16,7 17,6 18,0 19,300 18,200 17, 14,0 (31.5) (42.5) (49.5) (58.5) 13,9 14,0 15,6 16,4 16,4 15,4 14,0 (20.5) (36.5) 12,4 13,300 14,1 14,5 14,000 13,3 (29) () (47) (56) 10,0 11,300 12,1 12,0 12,0 12,1 (18.5) (34) (42.5) (48.5) (53) (56) 96 10,0 10,9 11,3 11,0 (27.5) (38) () 8220 9 30 99 10, (17.5) (32.5) (41) (47) (.5) 78 8300 8710 (26) (36.5) (43) (47.5) 60 7220 7620 00 (17) (31) (39.5) (44) 62 66 30 (25) (35) (.5) 5410 (16) 5810 (30) (24) 43 (16) 61 (36.5) 5410 (32) 4720 (27) (21) 3530 (10) Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft) at boom angle (no load) #LMI operating code. Refer to LMI manual for instructions. *This capacity is based upon maximum obtainable boom angle. Note: ( ) Boom angles are in degrees. + Special equipment is required to lift this capacity. ++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram Lifting capacities at zero degree boom angle Boom Main boom length in feet angle 41.3 ** 20,7 15,1 10,0 5 30 20 2000 0 (34.1) (42.8) (52.8) (63) (72.8) (82.8) (92.8) (102.8) (112.8) Note: ( ) Reference radii in feet. **This boom length is with inner-mid fully extended and outer-mid & fly fully retracted. 9 A6-829-1038 Grove TMS0E The individual crane s load chart, operating instructions and other instructional platesmust be read and understood prior to operating the crane. 11
41.3 ft - 128 ft 33 ft - 56 ft 24,000 lb % 35 45 125 135 1 145 1 1 1 1 *11,0 11,0 11,0 11,0 11,0 11,000 10,000 (66) 91 84 7820 () 72 67 62 58 10 (48.5) 51 (46) 47 (43.5) 4200 (.5) 36 (37.5) 31 (34) 2710 (30.5) 22 (26.5) 1910 (21.5) 15 (14.5) 33 ft LENGTH 2 *11,0 10,0 97 20 (71) 83 (69.5) 77 (67.5) 72 67 63 59 56 5320 30 47 (49.5) 4510 (46.5) 42 (44) 39 (41) 3420 (37.5) 2930 (34) 24 (29.5) 4 * 84 7920 7430 69 6210 58 52 20 47 (54) 45 43 (48.5) 41 (77.5) (71) (69.5) (66) (63) 51 47 (59.5) 44 (57.5) 4 38 35 33 (49.5) 31 (47.5) 29 (45.5) 27 (43) 25 (.5) 2430 (38) 2 (35) 17 (31.5) 14 (28) 11 (24) 36 56 ft LENGTH 2 4 * 5730 5330 49 46 43 38 3610 (.5) 30 (58.5) 3200 3020 28 26 () 25 (48) 20 22 (42.5) 21 (39.5) 2030 (36) 17 (32.5) *4930 46 43 4 38 36 34 3300 3 29 () 2820 26 25 (53) 2420 (.5) 2300 (47.5) NOTES: 1.All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J-7. 2.The 33 ft extension length may be used with single or double part line lifting service. The 56 ft extension length may be used for single line lifting service only. 3.For main boom lengths less than 128 ft with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5.Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6.Capacities listed are with outriggers properly extended and vertical jacks set only. 7.When lifting over the main boom nose with 33 ft or 56 ft extension erected, the outriggers must be fully extended or % extended (15 ft 5 in spread). Minimum boom angle ( ) for indicated length (no load) 13 28 43.5 19 31.5 46 Maximum boom length (ft) at boom angle (no load) 11 0 NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. 11 0 A6-829-103892 12
41.3 ft - 128 ft 33 ft - 56 ft 20 ft - ft 24,000 lb % 125 135 1 145 1 1 1 1 (77.5) 4730 4310 39 3610 3310 30 (.5) 27 25 23 21 19 1820 () 16 (48) 1530 (46) 10 (43.5) 12 (41.5) 11 (39) 10 (36.5) 2 *52 48 (76.5) 44 4 37 30 32 3000 27 25 23 2200 () 2030 18 1730 15 14 (.5) 13 (48) 1230 (46) 1 (43.5) 1020 (.5) 76 ft (56 ft LENGTH + 1 INSERT) 4 30 32 3030 2830 (.5) 2630 24 22 2 (63) 19 1830 10 15 () 14 13 (.5) 1230 (48) 1 96 ft (56 ft LENGTH + 2 INSERTS) (72.5) 3300 29 26 23 21 1920 1520 (59.5) 13 11 10 () 2 37 3420 3 2820 25 2320 2 10 15 13 1230 (.5) 10 36 4 *32 2720 24 22 20 18 15 13 12 1 NOTES: 1.All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J-7. 2.The 33 ft extension length may be used with single or double part line lifting service. The 56 ft extension length may be used for single line lifting service only. 3.For main boom lengths less than 128 ft with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5.Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6.Capacities listed are with outriggers properly extended and vertical jacks set only. 7.When lifting over the main boom nose with 33 ft or 56 ft extension erected, the outriggers must be fully extended or % extended (15 ft 5 in spread). Minimum boom angle ( ) for indicated length (no load) 35 39 43.5 53.5 58.5 Maximum boom length (ft) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. A6-829-103894 Grove TMS0E 13
41.3 ft - 128 ft 18,000 lb % 8 9 10 12 15 20 25 30 35 45 36 Main boom length in feet 41.3 ** 128 +1,000 ++1,000 147,000,0 111,000 87,6 63,0 (44) 45,4 (31) 86,000 86,000 86,000 86,000 (67.5) 86,000 63,7 (54) 45,6 (46.5) 34,4 (37) 26,0 (24) 86,000 86,000 86,000,0 63,300 45,0 34,5 (49.5) 27,000 (42) 21,5 (33.5) 17,4 (21.5) 41,000 41,000 41,000 41,000 41,000 34,0 27, 21,0 (45.5) 17,0 (39) 14,0 (31.5) 11,0 (20.5) 39,000 (76.5) 39,000 39,000 (69) 39,000 35,4 28,0 22,6 18,5 (47.5) 15,300 (42.5) 12,0 (36.5) 10,5 (29) 87 (18.5) 38,0 38,0 38,0 34, 28,9 23,0 (57.5) 19,4 16,1 (49.5) 13,0 11,3 () (34) 10 (27.5) 66 (17.5) *38,0 38,0 36,1 (.5) 31,3 (67.5) 27,0 24,3 20,200 16,9 14,3 12,200 (47) 10,0 (42.5) 88 (38) (32.5) 64 (26) 54 (17) *31,9 31,9 31,9 (72.5) 29,300 25,6 (67.5) 22,0 20,2 17,300 (58.5) 14,7 12,0 10,8 (48.5) 9320 10 (41) 68 (36.5) 58 (31) 00 (25) 4220 (16) *25,7 25,7 25,7 23,0 (69.5) 21,4 19, 17, 15, 13,000 (56) 11,2 (53) 97 () 8430 (47) 72 (43) 62 (39.5) 5410 (35) 4620 (30) 3920 (24) 32 (16) Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft) at boom angle (no load) #LMI operating code. Refer to LMI manual for instructions. *This capacity is based upon maximum obtainable boom angle. Note: ( ) Boom angles are in degrees. + Special equipment is required to lift this capacity. ++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram. Lifting capacities at zero degree boom angle Boom Main boom length in feet angle 41.3 ** 20,7 15,1 10,0 5 30 (34.1) (42.8) (52.8) (63) (72.8) (82.8) Note: ( ) Reference radii in feet. **This boom length is with inner-mid fully extended and outer-mid & fly fully retracted. 20 (92.8) 2000 (102.8) *14,0 14,0 14,0 14,0 (71) 14,0 14,0 (66) 14,0 14,0 13,3 11,0 (56) 10, 87 (.5) 76 (47.5) 66 (44) 57 (.5) 49 (36.5) 42 (32) 36 (27) 30 (21) 25 (10) 9 0 (112.8) A6-829-103749 14
41.3 ft - 128 ft 33 ft - 56 ft 18,000 lb % 2 33 ft LENGTH 56 ft LENGTH 4 2 36 4 35 *11,0 11,0 (77.5) 45 11,0 *11,0 11,0 10,0 * 11,0 97 84 11,000 20 7920 * (71) (71) 10,000 (66) 83 (69.5) 7430 (69.5) 91 77 (67.5) 69 5730 *4930 84 72 5330 46 (66) 7820 () 67 6210 49 43 72 63 58 (63) 46 4 67 59 51 43 38 62 56 52 47 (59.5) 36 57 5320 20 44 (57.5) 38 34 20 30 47 4 3610 3300 (48.5) (54) (.5) 43 (46) 47 (49.5) 45 38 30 (58.5) 3 37 (43.5) 41 (46.5) 43 (48.5) 35 3200 29 () 3220 35 38 33 3020 2820 (.5) (44) (49.5) 125 2710 (37.5) 3020 (41) 31 (47.5) 28 26 22 (34) 2520 (37.5) 2810 (45.5) 26 () 25 (53) 135 1830 20 20 25 2420 (30.5) (34) (43) (48) (.5) 1 14 (26.5) 16 (29.5) 2030 (.5) 20 2300 (47.5) 145 10 (21.5) 16 (38) 2 (42.5) 1 13 1730 (35) (39.5) 1 10 (31.5) 13 (36) 1 10 (32.5) Minimum boom angle ( ) for indicated 20 28 43.5 30 31.5 46 length (no load) Maximum boom length (ft) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. A6-829-103771 #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. NOTES: 1.All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J-7. 2.The 33 ft extension length may be used with single or double part line lifting service. The 56 ft extension length may be used for single line lifting service only. 3.For main boom lengths less than 128 ft with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5.Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6.Capacities listed are with outriggers properly extended and vertical jacks set only. 7.When lifting over the main boom nose with 33 ft or 56 ft extension erected, the outriggers must be fully extended or % extended (15 ft 5 in spread). Grove TMS0E 15
41.3 ft - 128 ft 56 ft 20 ft - ft 18,000 lb % 2 4 36 76 ft (56 ft LENGTH + 1 INSERT) 96 ft (56 ft LENGTH + 2 INSERTS) 2 4 (77.5) *52 48 (76.5) 44 37 (72.5) 4730 4 3420 4310 37 30 3300 3 *32 39 30 32 29 2820 2720 3610 32 3030 26 25 24 3310 3000 2830 23 2320 22 (.5) 30 27 2630 21 2 20 (.5) 27 25 24 1920 10 18 25 23 22 23 2200 2 1520 15 15 () (63) (59.5) 125 21 2030 19 13 13 13 19 18 1830 11 1230 12 (.5) 135 1820 1730 10 10 10 1 () () 1 16 15 15 (48) () 145 1530 14 14 (46) (.5) 1 10 13 13 (43.5) (48) (.5) 1 11 1230 1230 (41.5) (46) (48) 1 1 1 (43.5) Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft) at 39.5 43.5 53.5 58.5 boom angle (no load) NOTE: ( ) Boom angles are in degrees. A6-829-1037 #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. NOTES: 1.All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J-7. 2.The 56 ft extension length may be used for single line lifting service only. 3.For main boom lengths less than 128 ft with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5.Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6.Capacities listed are with outriggers properly extended and vertical jacks set only. 7.When lifting over the main boom nose with 56 ft extension erected and inserts, the outriggers must be fully extended and vertical jacks set. 16
41.3 ft- 128 ft 14,000 lb % 36 41.3 ** Main boom length in feet 128 8 ++1,000 9 ++1,000 86,000 10 145,0 86,000 86,000 12 129,000 86,000 86,000 41,000 15,000 86,000 86,000 41,000 39,000 (67.5) (76.5) 20,200 84,0 84,6 41,000 39,000 38,0 *38,0 *31,9 25 59,1 59,1 58,0 41,000 39,000 38,0 38,0 31,9 *25,7 *14,0 (44) (54) (69) 30 41,9 42,1 42, 41,000 39,000 38,0 36,1 31,9 25,7 14,0 (31) (46.5) (.5) (72.5) 35 31,0 31,7 31,0 32,0 33,0 31,3 29,300 25,7 14,0 (37) (49.5) (67.5) 24,4 24,6 24,7 25,6 26,5 27,0 25,6 23,0 14,0 (24) (42) (67.5) (69.5) (71) 45 19,0 19,6 20,6 21,0 22,3 22,6 21,4 14,0 (33.5) (45.5) (57.5) 15,6 15,0 16,7 17,6 18,0 18,7 19, 14,0 (21.5) (39) (47.5) (66) 12,0 13,0 14,5 15,3 15,0 16, 14,0 (31.5) (42.5) (49.5) (58.5) 10,0 11,2 12,0 12,0 13,300 13,6 14,1 (20.5) (36.5) 92 10,0 10,0 11,300 11,0 12, (29) () (47) (56) 83 9220 96 10,0 10,0 (18.5) (34) (42.5) (48.5) (53) (56) 60 77 8210 8630 89 (27.5) (38) () 56 69 73 77 (17.5) (32.5) (41) (47) (.5) 54 5910 6320 (26) (36.5) (43) (47.5) 45 49 53 57 (17) (31) (39.5) (44) 41 45 4930 (25) (35) (.5) 3420 3810 41 (16) (30) (36.5) 31 (24) (32) 25 2930 (16) (27) 23 (21) 10 (10) Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft) at 0 deg. boom angle (no load) 9 #LMI operating code. Refer to LMI manual for instructions. *This capacity is based upon maximum obtainable boom angle. Note: ( ) Boom angles are in degrees. ++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram. Lifting capacities at zero degree boom angle Boom Main boom length in feet angle 41.3 ** 20,7 (34.1) 15,1 (42.8) 10,0 (52.8) (63) 5 (72.8) Note: ( ) Reference radii in feet. **This boom length is with inner-mid fully extended and outer-mid & fly fully retracted. 30 (82.8) 20 (92.8) 2000 (102.8) 0 (112.8) A6-829-1037 Grove TMS0E 17
41.3 ft - 128 ft 33 ft - 56 ft 14,000 lb % 35 45 125 135 1 145 1 *11,0 11,0 11,0 11,0 11,0 11,000 10,000 (66) 91 84 7820 () 72 5710 49 42 (48.5) 3630 (46) 30 (43.5) 25 (.5) 20 (37.5) 16 (34) 12 (30.5) 2 *11,0 10,0 97 20 (71) 83 (69.5) 77 (67.5) 72 67 63 59 56 5320 47 (49.5) 34 (46.5) 20 (44) 23 (41) 1920 (37.5) 14 (34) 10 (29.5) 33 ft LENGTH 56 ft LENGTH 4 * 84 7920 7430 69 6210 58 52 20 47 (54) 4410 37 (48.5) 31 (77.5) (71) (69.5) (66) (63) 51 47 (59.5) 44 (57.5) 4 38 35 30 (49.5) 2610 (47.5) 2200 (45.5) 1820 (43) 14 (.5) 11 (38) 2 * 5730 5330 49 46 43 38 3610 (.5) 30 (58.5) 3200 3020 28 26 () 23 (48) 19 15 (42.5) 1210 (39.5) 36 4 *4930 46 43 4 38 36 34 3300 3 29 () 2820 26 25 (53) 2420 (.5) 2220 (47.5) Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft) at 26.5 28.5 43.5 35 36 46 boom angle (no load) NOTE: ( ) Boom angles are in degrees. A6-829-103772 #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. NOTES: 1.All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J-7. 2.The 33 ft extension length may be used with single or double part line lifting service. The 56 ft extension length may be used for single line lifting service only. 3.For main boom lengths less than 128 ft with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5.Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6.Capacities listed are with outriggers properly extended and vertical jacks set only. 7.When lifting over the main boom nose with 33 ft or 56 ft extension erected, the outriggers must be fully extended or % extended (15 ft 5 in spread). 18
41.3 ft - 128 ft 56 ft 20 ft - ft 14,000 lb % 125 135 1 145 1 1 1 (77.5) 4730 4310 39 3610 3310 30 (.5) 27 25 23 21 19 1820 () 10 (48) 12 (46) 2 *52 48 (76.5) 44 4 37 30 32 3000 27 25 23 2200 () 2030 18 1730 15 14 (.5) 13 (48) 1 (46) 4 30 32 3030 2830 (.5) 2630 24 22 2 (63) 19 1830 10 15 () 14 13 (.5) 1230 (48) 1020 (72.5) 3300 29 26 23 21 1920 1520 (59.5) 13 11 10 () 2 37 3420 3 2820 25 2320 2 10 15 13 1230 (.5) 10 36 76 ft (56 ft LENGTH + 1 INSERT) 96 ft (56 ft LENGTH + 2 INSERTS) 4 *32 2720 24 22 20 18 15 13 12 1 Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft) at 43.5 44.5 44 53.5 58.5 boom angle (no load) NOTE: ( ) Boom angles are in degrees. A6-829-103786 #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. NOTES: 1.All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J-7. 2.The 56 ft extension length may be used for single line lifting service only. 3.For main boom lengths less than 128 ft. with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5.Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6.Capacities listed are with outriggers properly extended and vertical jacks set only. 7.When lifting over the main boom nose with 56 ft extension erected and inserts, the outriggers must be fully extended and vertical jacks set. Grove TMS0E 19
41.3 ft - 128 ft 12,000 lb % 36 Main boom length in feet 41.3 ** 128 8 ++1,000 9 ++1,000 86,000 10 145,000 86,000 86,000 12 128,0 86,000 86,000 41,000 15,000 86,000 86,000 41,000 39,000 (67.5) (76.5) 20 83,9 83,6 83,4 41,000 39,000 38,0 *38,0 *31,9 25 56,8 56,0 56,4 41,000 39,000 38,0 38,0 31,9 *25,7 *14,0 (44) (54) (69) 30,200,0,3,0 39,000 38,0 36,1 31,9 25,7 14,0 (31) (46.5) (.5) (72.5) 35 30,200 30,3 30,2 31,200 32,200 31,3 29,300 25,7 14,0 (37) (49.5) (67.5) 23,2 23,4 23,5 24,0 25,0 26,4 25,6 23,0 14,0 (24) (42) (67.5) (69.5) (71) 45 18,0 18,6 19,0 20,4 21,300 21,6 21,4 14,0 (33.5) (45.5) (57.5) 14,7 14,9 15,8 16,7 17,0 17,8 18,200 14,0 (21.5) (39) (47.5) (66) 12,000 12,0 13,7 14,5 14,0 15,300 14,0 (31.5) (42.5) (49.5) (58.5) 96 10,0 11,3 12,200 12,5 12,9 13,4 (20.5) (36.5) 90 10,2 10,6 11,0 11,4 (29) () (47) (56) 69 77 8620 94 9810 (18.5) (34) (42.5) (48.5) (53) (56) 63 7230 76 8430 (27.5) (38) () 51 64 68 72 (17.5) (32.5) (41) (47) (.5) 10 5430 58 6220 (26) (36.5) (43) (47.5) 4 4520 4930 5320 (17) (31) (39.5) (44) 3730 4 4510 (25) (35) (.5) 3020 3410 37 (16) (30) (36.5) 27 31 (24) (32) 21 25 (16) (27) 20 (21) 15 (10) Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft) at boom angle (no load) 9 #LMI operating code. Refer to LMI manual for instructions. *This capacity is based upon maximum obtainable boom angle. Note: ( ) Boom angles are in degrees. Lifting capacities at zero degree boom angle Boom angle Main boom length in feet 41.3 ** 20,7 15,1 10,0 5 30 20 2000 0 (34.1) (42.8) (52.8) (63) (72.8) (82.8) (92.8) (102.8) (112.8) Note: ( ) Reference radii in feet. **This boom length is with inner-mid fully extended and outer-mid & fly fully retracted. A6-829-1031 20
41.3 ft - 128 ft 33 ft - 56 ft 12,000 lb 35 *11,0 11,0 45 11,0 11,0 11,0 11,000 10,000 (66) 91 84 7820 () 6 52 45 38 (48.5) 32 (46) 2720 (43.5) 2220 (.5) 125 17 (37.5) 13 (34) 135 1 145 2 *11,0 10,0 97 20 (71) 83 (69.5) 77 (67.5) 72 67 63 59 56 5 43 3710 (49.5) 3 (46.5) 25 (44) 20 (41) 1610 (37.5) 11 (34) 4 * 84 7920 7430 69 6210 58 52 20 47 (54) 3420 (48.5) 28 % 33 ft LENGTH 56 ft LENGTH (77.5) (71) (69.5) 68) (66) (63) 51 47 (59.5) 44 (57.5) 4 3720 3200 2730 (49.5) 22 (47.5) 10 (45.5) 1530 (43) 11 (.5) 2 * 5730 5330 49 46 43 38 3610 (.5) 30 (58.5) 3200 3020 28 2510 () 20 (48) 16 0 (42.5) 36 4 *4930 46 43 4 38 36 34 3300 3 29 () 2820 26 25 (53) 2410 (.5) 19 (47.5) Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft) at 30.5 32.5 43.5 38 39.5 46 boom angle (no load) NOTE: ( ) Boom angles are in degrees. A6-829-103773 #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. NOTES: 1. All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J-7. 2. The 33 ft extension length may be used with single or double part line lifting service. The 56 ft extension length may be used for single line lifting service only. 3. For main boom lengths less than 128 ft with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5. Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. 7. When lifting over the main boom nose with 33 ft or 56 ft extension erected, the outriggers must be fully extended or % extended (15 ft 5 in spread). GROVE TMS0E 21
41.3 ft - 128 ft 56 ft 20 ft - ft 12,000 lb % 125 135 1 145 1 1 Minimum boom angle ( ) for indicated length (no load) (77.5) 4730 4310 39 3610 3310 30 (.5) 27 25 23 21 19 16 () 1320 (48) 2 *52 48 (76.5) 44 4 37 30 32 3000 27 25 23 2200 () 2030 18 1730 15 14 (.5) 11 (48) 4 30 32 3030 2830 (.5) 2630 24 22 2 (63) 19 1830 10 15 () 14 13 (.5) 1 (48) (72.5) 3300 29 26 23 21 1920 1520 (59.5) 13 11 10 () 2 37 3420 3 2820 25 2320 2 10 15 13 1230 (.5) 10 36 76 ft (56 ft LENGTH + 1 INSERT) 96 ft (56 ft LENGTH + 2 INSERTS) 4 *32 2720 24 22 20 18 15 13 12 1 46 46 46.5 53.5 58.5 Maximum boom length (ft) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. A6-829-103787 #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. NOTES: 1.All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J-7. 2.The 56 ft extension length may be used for single line lifting service only. 3.For main boom lengths less than 128 ft with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5.Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6.Capacities listed are with outriggers properly extended and vertical jacks set only. 7.When lifting over the main boom nose with 56 ft extension erected and inserts, the outriggers must be fully extended and vertical jacks set. 22
41.3 ft - 128 ft 10,000 lb % 36 Main boom length in feet 41.3 ** 128 8 ++1,000 9 ++1,000 86,000 10 144,0 86,000 86,000 12 128,000 86,000 86,000 41,000 15 109,0 86,000 (67.5) 86,000 41,000 39,000 (76.5) 20 82,0 82,0 82,200 41,000 39,000 38,0 *38,0 *31,9 25 54,5 (44) 54,0 (54) 54,1 41,000 39,000 (69) 38,0 38,0 31,9 *25,7 *14,0 30 38,4 (31) 38,6 (46.5) 38,0 38,300 39,000 38,0 36,1 (.5) 31,9 (72.5) 25,7 14,0 35 28,0 (37) 28,9 (49.5) 28,8 29,0 30,7 31,3 (67.5) 29,300 25,7 14,0 22, (24) 22,300 (42) 22,0 23,300 24,200 25,2 25,0 (67.5) 23,0 (69.5) 14,0 (71) 45 17,0 (33.5) 17,6 (45.5) 18,0 19,4 (57.5) 20,300 20,0 20,0 14,0 13,8 (21.5) 14,0 (39) 14,9 (47.5) 15,8 16,0 16,9 17,300 14,0 (66) 11,200 (31.5) 12, (42.5) 12,9 (49.5) 13,7 14, (58.5) 14,0 14,0 89 (20.5) 9810 (36.5) 10,6 11,4 11,8 12,2 12,0 7930 (29) 87 () 9610 (47) 10,000 10,0 (56) 10,0 63 (18.5) 71 (34) 20 (42.5) 84 (48.5) 88 (53) 9210 (56) 57 (27.5) 66 (38) 7 20 () 78 4620 (17.5) 20 (32.5) 59 (41) 63 (47) 6720 (.5) 4520 (26) 49 (36.5) 53 (43) 5730 (47.5) 36 (17) (31) 44 (39.5) 48 (44) 3300 (25) 30 (35) (.5) 2610 (16) 3000 (30) 33 (36.5) 23 (24) 27 (32) 1830 (16) 2200 (27) 10 (21) 12 (10) Mimimum boom angle ( ) for indicated length (no load). 9 Maximum boom length (ft) for boom angle (no load). #LMI operating code. Refer to LMI manual for instructions. *This capacity is based upon maximum obtainable boom angle. Note: ( ) Boom angles are in degrees. ++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram Lifting capacities at zero degree boom angle Boom angle Main boom length in feet 41.3 ** 20,7 (34.1) 15,1 (42.8) 10,0 (52.8) (63) 5 (72.8) Note: ( ) Reference radii in feet. **This boom length is with inner-mid fully extended and outer-mid & fly fully retracted. 30 (82.8) 20 (92.8) 2000 (102.8) 0 (112.8) A6-829-1032 Grove TMS0E 23
41.3 ft - 128 ft 33 ft - 56 ft 10,000 lb % 35 45 125 135 1 145 2 *11,0 11,0 11,0 *11,0 11,0 10,0 11,0 97 11,000 20 (71) 10,000 83 (66) (69.5) 91 77 (67.5) 84 72 7630 67 () 63 56 59 54 4 46 34 39 (48.5) 20 33 (46) (49.5) 23 27 (43.5) (46.5) 18 22 (.5) (44) 14 17 (37.5) (41) 10 1310 (34) (37.5) 4 * 84 7920 7430 69 6210 58 52 20 43 (54) 36 30 (48.5) 2510 (77.5) (71) (69.5) (66) (63) 51 47 (59.5) 44 (57.5) 3910 33 28 23 (49.5) 19 (47.5) 15 (45.5) 12 (43) 36 33 ft LENGTH 56 ft LENGTH 2 * 5730 5330 49 46 43 38 3610 (.5) 30 (58.5) 3200 3020 26 2210 () 17 (48) 13 1030 (42.5) 4 *4930 46 43 4 38 36 34 3300 3 29 () 2820 26 25 (53) 2 (.5) 16 (47.5) Minimum boom angle ( ) for 33 indicated length (no load) Maximum boom length (ft) at boom angle (no load) 34 43.5.5 41.5 46 NOTE: ( ) Boom angles are in degrees. A6-829-103774 #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. NOTES: 1.All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J-7. 2.The 33 ft extension length may be used with single or double part line lifting service. The 56 ft extension length may be used for single line lifting service only. 3.For main boom lengths less than 128 ft with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5.Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6.Capacities listed are with outriggers properly extended and vertical jacks set only. 7.When lifting over the main boom nose with 33 ft or 56 ft extension erected, the outriggers must be fully extended or % extended (15 ft 5 in spread). 24
41.3 ft - 128 ft 56 ft 20 ft - ft 10,000 lb % 125 135 1 145 1 (77.5) 4730 4310 39 3610 3310 30 (.5) 27 25 23 21 17 13 () 10 (48) 2 *52 48 (76.5) 44 4 37 30 32 3000 27 25 23 2200 () 2030 18 1730 15 12 (.5) 4 30 32 3030 2830 (.5) 2630 24 22 2 (63) 19 1830 10 15 () 14 0 (.5) (72.5) 3300 29 26 23 21 1920 1520 (59.5) 13 11 10 () 2 37 3420 3 2820 25 2320 2 10 15 13 1230 (.5) 10 36 76 ft (56 ft + 1 INSERT) 96 ft (56 ft + 2 INSERTS) 4 *32 2720 24 22 20 18 15 13 12 1 Minimum boom angle ( ) for indicated length (no load) Maximum boom length (ft) at 46.5 48 48 54 58.5 boom angle (no load) NOTE: ( ) Boom angles are in degrees. A6-829-103788 #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. NOTES: 1.All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J-7. 2.The 56 ft extension length may be used for single line lifting service only. 3.For main boom lengths less than 128 ft with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5.Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6.Capacities listed are with outriggers properly extended and vertical jacks set only. 7.When lifting over the main boom nose with 56 ft extension erected and inserts, the outriggers must be fully extended and vertical jacks set. Grove TMS0E 25
41.3 ft - 128 ft 00 lb % 36 Main boom length in feet 41.3 ** 128 8 ++1,000 9 ++1,000 86,000 10 143,0 86,000 86,000 12 127,0 86,000 86,000 41,000 15 109,000 86,000 86,000 41,000 39,000 (67.5) (76.5) 20 81,4,1 79,2 41,000 39,000 38,0 *38,0 *31,9 25 52,2 52,300 51,8 41,000 39,000 38,0 38,0 31,9 *25,7 *14,0 (44) (54) (69) 30 36,0 36,0 36,8 36,0 37,6 38,0 36,1 31,9 25,7 14,0 (31) (46.5) (.5) (72.5) 35 27,0 27,0 27,4 28,0 29,3 30,8 29,300 25,7 14,0 (37) (49.5) (67.5) 20,0 21, 21,200 22, 23,000 24,0 24,300 23,0 14,0 (24) (42) (67.5) (69.5) (71) 45 16,4 16,0 17,0 18,0 19,300 19,0 19,0 14,0 (33.5) (45.5) (57.5) 12,9 13,1 14,0 14,9 15,0 16,0 16,0 14,0 (21.5) (39) (47.5) (66) 10,0 11,300 12,1 12,9 13,300 13,0 14,300 (31.5) (42.5) (49.5) (58.5) 82 9 9930 10,7 11,1 11,0 12,000 (20.5) (36.5) 72 89 93 97 10,1 (29) () (47) (56) 57 7420 78 82 8610 (18.5) (34) (42.5) (48.5) (53) (56) 5230 6 69 7310 (27.5) (38) () 4 00 5430 58 6210 (17.5) (32.5) (41) (47) (.5) 44 48 52 (26) (36.5) (43) (47.5) 3200 3620 20 4420 (17) (31) (39.5) (44) 28 32 36 (25) (35) (.5) 2210 20 29 (16) (30) (36.5) 2000 23 (24) (32) 14 18 (16) (27) 13 (21) Minimum boom angle ( ) for indicated length (no load). 9 Maximum boom length (ft) at boom angle (no load). 102 #LMI operating code. Refer to LMI manual for instructions. *This capacity is based upon maximum obtainable boom angle. Note: ( ) Boom angles are in degrees. ++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram Lifting capacities at zero degree boom angle Boom Main boom length in feet angle 41.3 ** 20,7 15,1 10,0 00 35 27 18 11 (34.1) (42.8) (52.8) (63) (72.8) (82.8) (92.8) (102.8) (112.8) Note: ( ) Reference radii in feet. A6-829-1033 **This boom length is with inner-mid fully extended and outer-mid & fly fully retracted. 26
41.3 ft - 128 ft 33 ft - 56 ft 00 lb % 35 45 125 135 1 Minimum boom angle ( ) for indicated length (no load) *11,0 11,0 11,0 11,0 11,0 11,000 10,000 (66) 91 82 7 () 6 5210 4430 3730 3 (48.5) 25 (46) 2030 (43.5) 15 (.5) 1 (37.5) 2 *11,0 10,0 97 20 (71) 83 (69.5) 77 (67.5) 72 67 63 5920 42 30 29 (49.5) 2420 (46.5) 1910 (44) 14 (41) 1010 (37.5) 4 * 84 7920 7430 69 6210 58 52 4720 39 (54) 3320 2720 (48.5) 21 (77.5) (71) (69.5) (66) (63) 51 47 (59.5) 4 (57.5) 3530 29 2510 20 (49.5) 16 (47.5) 12 (45.5) 36 33 ft LENGTH 56 ft LENGTH 2 * 5730 5330 49 46 43 38 3610 (.5) 30 (58.5) 3200 28 23 10 () 14 (48) 1 4 *4930 46 43 4 38 36 34 3300 3 29 () 2820 26 2310 (53) 1820 (.5) 13 (47.5) 36.5 36.5 4.35 43 44 46 Maximum boom length (ft) at boom angle (no load) NOTE: ( ) Boom angles are in degrees. A6-829-1037 #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. NOTES: 1.All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J-7. 2.The 33 ft extension length may be used with single or double part line lifting service. The 56 ft extension length may be used for single line lifting service only. 3.For main boom lengths less than 128 ft with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of th next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5.Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6.Capacities listed are with outriggers properly extended and vertical jacks set only. 7.When lifting over the main boom nose with 33 ft or 56 ft extension erected, the outriggers must be fully extended or % extended (15 ft 5 in spread). Grove TMS0E 27
41.3 ft - 128 ft 56 ft 20 ft - ft 00 lb % 125 135 1 145 Minimum boom angle ( ) for indicated length (no load) (77.5) 4730 4310 39 3610 3310 30 (.5) 27 25 22 18 14 1 () Maximum boom length (ft) at boom angle (no load) 2 *52 48 (76.5) 44 4 37 30 32 3000 27 25 23 2200 () 2030 18 10 1320 4 30 32 3030 2830 (.5) 2630 24 22 2 (63) 19 1830 10 15 () 0 (72.5) 3300 29 26 23 21 1920 1520 (59.5) 13 11 2 37 3420 3 2820 25 2320 2 10 15 13 1230 (.5) 10 36 76 ft (56 ft LENGTH + 1 INSERT) 96 ft (56 ft LENGTH + 2 INSERTS) 4 *32 2720 24 22 20 18 15 13 12 1 48.5.5.5 58.5 NOTES: 1.All capacities above the bold line are based on structural strength of boom extension and do not exceed % of tipping loads, in accordance with SAE J-7. 2.The 56 ft extension length may be used for single line lifting service only. 3.For main boom lengths less than 128 ft with the boom extension erected, the rated loads are determined by boom angle. Use only the column which corresponds to the boom extension length and offset for which the machine is set up. For boom angles not shown, use rating of the next lower boom angle. 4. WARNING: Operation of this machine with heavier loads than the capacities listed is strictly prohibited. Machine tipping with boom extension occurs rapidly and without advance warning. 5.Boom angle is the angle above or below horizontal of the longitudinal axis of the boom base section after lifting rated load. 6.Capacities listed are with outriggers properly extended and vertical jacks set only. 7.When lifting over the main boom nose with 56 ft extension erected and inserts, the outriggers must be fully extended and vertical jacks set. NOTE: ( ) Boom angles are in degrees. A6-829-103789 #LMI operating code. Refer to LMI manual for operating instructions. *This capacity is based upon maximum boom angle. 28
41.3 ft - 128 ft 00 lb % 8 9 10 12 15 20 25 30 35 45 36 Main boom length in feet 41.3 ** 128 ++1,000 ++1,000 86,000 142,0 86,000 86,000 126,0 86,000 86,000 41,000 108,000 86,000 86,000 41,000 39,000 (67.5) (76.5),1 73,0 72,0 41,000 39,000 38,0 *38,0 *31,9 47,0 47,7 47,300 41,000 39,000 38,0 38,0 31,9 *25,7 *14,0 (44) (54) (69) 33,200 33,0 33,0 33, 34,1 35,2 36,1 31,9 25,7 14,0 (31) (46.5) (.5) (72.5) 24,5 24,0 24,6 25,5 26,5 28,0 28, 25,7 14,0 (37) (49.5) (67.5) 18,5 18,7 18,8 19,7 20,6 21,0 21,9 22,1 14,0 (24) (42) (67.5) (69.5) (71) 14,4 14,5 15,5 16,0 17,2 17,5 17,8 14,0 (33.5) (45.5) (57.5) 11,1 11,3 12,2 13,1 13,0 14,2 14,0 14,0 (21.5) (39) (47.5) (66) 8830 9720 10,5 11,3 11,0 12, 12,0 (31.5) (42.5) (49.5) (58.5) 60 76 84 9320 9710 10,0 10,5 (20.5) (36.5) 59 67 76 8430 88 (29) () (47) (56) 45 53 6220 66 70 (18.5) (34) (42.5) (48.5) (53) (56) 4 10 54 58 6200 (27.5) (38) () 30 39 40 4810 51 (17.5) (32.5) (41) (47) (.5) 30 30 3910 42 (26) (36.5) (43) (47.5) 2300 2710 3 3510 (17) (31) (39.5) (44) 2020 2420 2810 (25) (35) (.5) 10 17 21 (16) (30) (36.5) 12 15 (24) (32) 10 (27) Mimimum boom angle ( ) for indicated length (no load). 23 26 Maximum boom length (ft) at boom angle (no load). #LMI operating code. Refer to LMI manual for instructions. *This capacity is based upon maximum obtainable boom angle. Note: ( ) Boom angles are in degrees. ++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram Lifting capacities at zero degree boom angle Boom angle Main boom length in feet 41.3 ** 20,7 15,1 96 57 38 25 (34.1) (42.8) (52.8) (63) (72.8) (82.8) Note: ( ) Reference radii in feet. **This boom length is with inner-mid fully extended and outer-mid & fly fully retracted. 10 (92.8) 10 (102.8) A6-829-1034 Grove TMS0E 29