Louvre panels & grilles Self-assembly
Installation instructions You can make ventilation grilles to any dimensions you want with a minimum of profiles and accessories. These grilles with slats are made with aluminium profiles. They are available in anodised natural colour, white painted or raw aluminium. A groove in provided in the frame for the installation of insect screen.. Cutting to size: Horizontal and vertical frame sections should be mitred at 45 : - horizontal frame sections are not perforated - vertical sections are perforated to attach the blade supports. Fitting the frame sections: The frame sections are joined together with corner pieces. Tap with a nylon hammer to ensure proper insertion. Clamp the frame sections with the punching machine. 3. Fitting the blade supports: Rivet the blade supports to the perforated vertical sections. 4. Fitting the blades: Determine the length of the blades in a way that they fit exactly inside the frame. The blades are cut to the required length and fixed to the blade supports (clipping system). Fitting should start at the top and work down. 5. Strengthening the louvers and blades: It is recommended to reinforce all louvres at least 700 mm wide (including models 4 and 45) with section 3 and T-pieces 4. 6. Powder-coating the louvres: The louvres can be powder-coated after assembly. In the event of separate powder-coating, the blade supports remain in natural aluminium. 7. Insect screen or bird mesh: The stainless steel insect screen is fitted into a groove on the back of the frame by means of a PVC bead. Free optimising software available on request.
Assembly accessor Reference A400/ A400/ Hand roller for.3 x.3 mm insect screen Hand roller for 6 x 6 mm mesh Punching machine - manual Punching machine pneumatic Templates for punching machine More information available upon request Assembly components Reference 3 4 4/ - 4/ 4/ - 4/ Perforated strengthening profile with groove for insect screen T-piece for the strengthening profile Stainless steel insect screen,.3 x.3 mm Stainless steel insect screen,.3 x.3 mm Stainless steel mesh, 6 x 6 mm Stainless steel mesh, 6 x 6 mm Insect screen gasket (black) Special oven-resistant insect screen gasket (white) Purchasing Conditions Ten 6 m lengths Per piece Per 0 m x, m roll Per 5 m x, m roll Per 0 m x, m roll Per 5 m x, m roll Per 600 m roll Per 500 m roll Reference 4 4 4 4 Spring clips for louvres 4, 4 and 4 Brackets for louvres 4, 4, 4 Brackets for louvres 4, 4, 4 Brackets for louvres 45, 46, 47, 40, 45, 4, 453 Purchasing Conditions 50 pieces 4 pieces 4 pieces 4 pieces 3
/P 0A/5A/0A /P 0A 0A Type 4 5A Reference 0A/0B /P 0B/5B/0B 0B/5B/0B /P /S/L 0A/5A/0A /P 0B 0B 5B non-perforated/ perforated P frame 0, 5 and 0 Purchasing Conditions Five 6 m/3 m lengths 00 pieces P /P 0A/5A/0A 0A/5A/0A 0A /P 0A /P 0A 0A 0A5A Type 4ZF 5A Reference 0A/0B 0B/5B/0B 0B 0B/5B/0B 0B/5B/0B 0B /S/L /S/L 0B 0B0B 0B 5B 5B P /P 0A/5A/0A 0A/5A/0A 0A /P /P Frame profile flangeless, Coupling profile Purchasing Conditions Five 6 m/3 m lengths Five 6 m/3 m lengths A/0A /P /P 0A 0A/5A/0A 5A 0A /P 0A 5A Type 44 0A 5A B Reference 5A/5B /P S/L A/0A 0B/5B/0B 5B 0B/5B/0B /P /P /S/L 0A/5A/0A 5A 0B/5B/0B 5B /P 0B 0B 5B 0B 0B 5B 4 mm, frame 0, 5 and 0 Purchasing Conditions Five 6 m/3 m lengths 00 pieces P /P 0A/5A/0A /P 0B/5B/0B 0B/5B/0B 0A Type 4 0A 5A Reference 0A/0B /P 0B 0B 5B P /P 0A/5A/0A /P frame 0, 5 and 0 Purchasing Conditions Five 6 m/3 m lengths 00 pieces 4
S/L /3 S L /5 Top Z-blade profile Standard Z-blade profile Short/elongated Z-blade profile Ten 6 m/3 m lengths Ten 6 m/3 m lengths Ten 6 m/3 m lengths 00 pieces /P S/L /3 P S L /5 frame 0, 5 and 0 Top blade profile Standard Z-blade profile Short/elongated Z-blade profile 00 pieces Ten 6 m/3 m lengths Ten 6 m/3 m lengths Ten 6 m/3 m lengths 00 pieces S/L /3 S L /5 Top Z-blade profile Standard Z-blade profile Short/elongated Z-blade profile Ten 6 m/3 m lengths Ten 6 m/3 m lengths Ten 6 m/3 m lengths 00 pieces Profiel V-lamel Ten 6 m/3 m lengths 00 pieces 5
/P 0A/5A/0A 0A /P 0A 0A Type 4ZF 5A Reference 0A/0B 0B/5B/0B 0B 0B/5B/0B 0B 0B 0B 5B /P 0A/5A/0A 0A /P Frame profile flangeless, Coupling profile Purchasing Conditions Five 6 m/3 m lengths Five 6 m/3 m lengths A/0A /P /P 0B/5B/0B 5B 0A/5A/0A 5A 0A 0B/5B/0B /P 0A 0B/5B/0B 5B 0A 5A Type 45 0A 5A Reference 5A/5B /P 0B 0B 5B 0B 0B 5B P A/0A /P /P 0A/5A/0A 5A /P 4 mm, frame 0, 5 and 0 Purchasing Conditions Five 6 m/3 m lengths 00 pieces B//4B / A/A/4A / B /S/L / A/A/4A / B//4B A B B Type A4 4A Reference A/B / B B 4B frame, and 45 Purchasing Conditions Five 6 m/3 m lengths pieces / A/A/4A / A/A/4A / / B B B//4B /S/L / A/A/4A / A/A/4A A / / /S/L B//4B B//4B A B B A A B B Type A4ZF 4A 4A Reference A/ 6 B B 4B B 4B Frame profile flangeless, Coupling profile (mullion transom joint) for A and Purchasing Conditions Five 6 m/3 m lengths Five 6 m lengths 6
/P P frame 0, 5 and 0 Chevron-section blade 00 pieces Ten 6 m/3 m lengths 00 pieces Chevron-section blade Ten 6 m/3 m lengths 00 pieces B S/L S L Top blade profile Blade profile, heavy-duty series Short/Elongated blade profile Support for four Z-blades n B/S/ L Ten 6 m lengths Ten 6 m lengths Ten 6 m lengths 50 pieces / B S/L S L frame, and 45 Top blade profile Blade profile, heavy-duty series Short/Elongated blade profile Support for four Z-blades n B/S/ L pieces Ten 6 m lengths Ten 6 m lengths Ten 6 m lengths 50 pieces 7
A/4A B//4B / / A/A/4A A / A B B//4B B B B//4B B 4A A B B 4B Type A 44 4A Reference 4A/4B / B B 4B 7S/L A/4A /S/L / / A/A/4A / frame, and 45 Purchasing Conditions Five 6 m/3 m lengths pieces / A/A/4A V / Type 4 A A 4A Reference A/B / B//4B V V V V V B//4B V V V B 4B / A/A/4A / frame, and 45 Purchasing Conditions Five 6 m/3 m lengths pieces / / A/A/4A A/A/4A A / V V / Type 4ZF A A A A 4A 4A Reference A/ 6 B//4B V V V V V V V V V V B//4B B//4B V V V V V B B 4B 4B / / A/A/4A A/A/4A A / / Frame profile flangeless, Coupling profile (mullion transom joint) for A and Purchasing Conditions Five 6 m/3 m lengths Five 6 m lengths A/4A / / A/A/4A / A A /5 V /3 V Type 4 4A A A 4A Reference 4A/4B / V V V V V B//4B B//4B V V V V V V V V V V B//4B B 4B B 4B A/4A / / A/A/4A / frame, and 45 Purchasing Conditions Five 6 m/3 m lengths pieces
B S/L S L Top blade profile Blade profile, heavy-duty series Short/Elongated blade profile Support for four Z-blades n B/S/ L Ten 6 m lengths Ten 6 m lengths Ten 6 m lengths 50 pieces V /3 /5 Reinforced V-blade Ten 6 m lengths 00 pieces / V /3 /5 frame, and 45 Reinforced V-blade pieces Ten 6 m lengths 00 pieces V /3 /5 Reinforced V-blade Ten 6 m lengths 00 pieces
B//4B / A/A/4A / HF HF HF HF / A/A/4A / B//4B A B Type 4 Reference A/B / frame, and 45 Purchasing Conditions Five 6 m/3 m lengths pieces / A/A/4A / A/A/4A A / / HF Type 4ZF A A A A 4A 4A Reference A/ 6 B//4B HF HF B//4B B//4B HF B B 4B 4B / A/A/4A / A/A/4A A / / Frame profile flangeless, Coupling profile (mullion transom joint) for A and Purchasing Conditions Five 6 m/3 m lengths Five 6 m lengths A/4A 50HF 50HF 50HF 50HF / / A/A/4A A / A HF B//4B B//4B HF HF B//4B B HF Type 44 4A A A 4A Reference 4A/4B / B 4B 4B A/4A / / A/A/4A / frame, and 45 Purchasing Conditions Five 6 m/3 m lengths pieces 30A/30A/3A 30A Type 40 3A Reference 30A 30A/30B 53HF 30B/30B/3B 53HF 53HF 53HF 30B/30B/3B 30B 3B 30B 30A/30A/3A Flat corner cleat Purchasing Conditions Five 6 m lengths 00 pieces 0
HF Blade profile, heavy-duty series Ten 6 m lengths 50 pieces / HF frame, and 45 Blade profile, heavy-duty series pieces Ten 6 m lengths 50 pieces HF Blade profile, heavy-duty series Ten 6 m lengths 50 pieces 53HF frame 30 Profiel I-lamel 00 pieces Ten 6 m lengths 50 pieces
A 30A/30A/3A 30A 3A 30A Type 40ZF 3A Reference 30A 30A/30B 6 53HF 30B/30B/3B 30B 53HF 53HF 53HF 30B 30B/30B/3B 3B 30B 3B 30B 3A 30A/30A/3A Frame profile flangeless, Coupling profile (mullion transom joint) for A and Purchasing Conditions Five 6 m/3 m lengths Five 6 m lengths 30A/30A/3A 30A/30A/3A 4 30A 3A 30A Type 43 3A 30A 30A Reference 3A/3B 53HF 30B/30B/3B 30B/30B/3B 53HF 53HF 53HF 30B/30B/3B 30B 3B 30B 3B 30B 30B 4 30A/30A/3A 30A/30A/3A frame 30 Purchasing Conditions Five 6 m lengths 00 pieces 30A 30A Type 45 Reference 30A/30B 3 3 3 3 3 30B 3 3 30B 30B 3 30A Flat corner cleat Purchasing Conditions Five 6 m lengths 00 pieces 5A 5A Type 45 4 4 4 4 Reference 5A/5B 4 5B 4 4 5B 4 5B 5A Corner cleat for frame 30 Purchasing Conditions Ten 6 m lengths 00 pieces
53HF frame 30 Profiel I-lamel 00 pieces Ten 6 m lengths 50 pieces 53HF Profiel I-lamel Ten 6 m lengths 50 pieces 3 3 frame 30 Blade profile, extra-heavy-duty series 00 pieces Ten 6 m lengths 00 pieces 4 4 Special heavy-duty blade Ten 6 m lengths 50 pieces 3
B/P 6A B/P 6A B Type 43 Reference Purchasing Conditions 6B 6B 6A/6B B non-perforated/ perforated Five 6 m lengths /S/L 6B B/P Corner cleat 00 pieces B/P 6A B/P P Top Z-blade profile Ten 6 m/3 m lengths Standard Z-blade profile Ten 6 m/3 m lengths S/L Short/elongated Z-blade profile Ten 6 m/3 m lengths S L /3 00 pieces /5 4
References 5
Creating healthy spaces RENSON : your partner in ventilation and sun protection RENSON, headquartered in Waregem (Belgium), is a trendsetter in Europe in natural ventilation and sun protection. Creating healthy spaces From 0, we ve been developing energy efficient solutions assuring a healthy and comfortable indoor climate. Our remarkable headquarters - built according to the Healthy Building Concept is a beautiful example portraying our corporate mission. No speed limit on innovation A multidisciplinary team of more than 70 R&D employees continually optimize our products and develop new and innovative concepts. Strong in communication Contact with the customer is of the utmost importance. A group of 70 in-the-field employees worldwide and a powerful international distribution network are ready to advise you on site. EXIT 5 at Waregem gives you the possibility to experience our products on your own and provides necessary training for installers. A reliable partner in business We can guarantee our customers optimal quality and service thanks to our environmentally friendly and modern production sites (with automated powder coating line, anodisation line, plastic injection moulding and mold making shop) covering an area of 5.000 m². Dealer VENTILATION SUNPROTECTION OUTDOOR RENSON reserves the right to make technical changes to the products shown. The latest brochures may be downloaded from www.renson.eu RENSON Export Department Tel. +3 (0)56 6 7 04 export@renson.net RENSON Headquarters IZ Vijverdam Maalbeekstraat 0 70 Waregem Belgium Tel. +3 (0)56 6 7 Fax +3 (0)56 60 5 info@renson.be www.renson.eu RENSON Fabrications LTD Fairfax Units -5 Bircholt Road Parkwood Industrial Estate Maidstone Kent ME5 SF Tel. 06/7543 Fax 06/647 info@rensonuk.net www.renson.eu *L030* L030 0/5 UK-Engels