Summary Jubail Industrial City. KSA +966-50-433-4699 a.alhuzaim@hotmail.com Work Experience Abdullah Fahad Alhuzaim Profile: Male, 34 Nationality: Saudi Current Location: Jubail Industrial City, KSA Current position: Welding Engineer/ Head of Mechanical Dep. Company: The Royal Commission Of Jubail And Yanbu Preferred Locations: All Middle East Countries Languages: Arabic & English Years of experience: 12 years Highest Education: Master of Science in General Engineering Welding Engineering option. Personal website: www.abdullahalhuzaim.com 2003-Present Royal Commission Jubail Industrial City, Jubail Technical Institute Kingdom of Saudi Arabia Head of Mechanical Dep. (May/2014 to Present) Primary responsibilities include, prepare training programs/schedules in coordination with other departments, and ensure that training programs are effectively communicated to all concerned. Academic leadership of the subject area, including - Manages the 6 skills of the Mechanical Department with 45 staff members (Millwright, Welding, Pipefitting, Machining, Heavy Equipment, CADD) - Reviews and approves the annual requisition for the department - Recommends good working attitude with the mechanical staffs - Directs the activities of the Department and Lead team in the area of accountability such as Six Sigma. - Responsible for correct, comprehensive and clear instruction and guidance of subordinates. - Responsible for the development and adequate planning of management spheres and activities - Deals personally and independently departmental activities and vocational training - Evaluates the performance of the personnel - Proposes staff training and career development programs - Work out training outlines, training courses suitable for industries - Keeps contact with foreign training and educational institutions
Achievements o Accredit Jubail Technical Institute (JTI) to be Accredited Testing Facility (ATF) from the American Welding Society (AWS) o Stablished the first underwater training center (Commercial Diving Center) in the Middle East, the training include underwater welding, NDT, Savage work, pipefitting, diving physics, diving physiology, decompression, & emergency management procedures, diving equipment, systems, & procedures, practical use of diving equipment, diving hazards & legislation, diver communication systems, rigging, underwater inspections training & searches, water jetting, airlifts, lift bags, cutting & welding equipment, underwater explosives, underwater construction techniques and hyperbaric chamber operations. o Represent the Kingdom of Saudi Arabia in the GCC skills competition as welding expert and judge on Oman (2010) - Senior Instructor (May-2014 to Present) Primary responsibilities includes provide training in verity of welding processes and assess them by distractive and non-distractive testing for weldments. A theoretical overview of welding symbols used on drawings in fabrication workshops and industrial plants according to ANSI/AWS A2.4. Provide training in different types of methods and machinery concerning welding requirements, and auxiliary welding equipment on industrial plants and fabrication workshops. Familiarize the students with the chemical and metallurgical properties of various steels and alloys. Provide the students with a technical understanding of oxyacetylene welding, flame cutting and brazing fundamentals and welding safety. Provide training to develop the hands-on skill necessary to produce high quality welds. Provide training on SMAW to develop the manual skills necessary to produce quality multipass fillet and groove welds with backing in all positions, using the E6010 and E7018 electrodes on thick carbon steel plate similar to many structural applications and high quality single V-groove welds carbon steel pipe in all positions (2G, 5G and 6G) visually inspect welds with naked eyes penetrant or magnetic particle testing. Acquiring the basic skills required to weld medium to thick carbon steel plate, steel pipes and Aluminum in all positions with GMAW or flux-cored. Provide the students with a thorough technical understanding of gas tungsten arc welding fundamentals, preparation for welding pipe and tubes and their welding defects. - Master Trainer/ Curriculum Specialist (October/2011 May/2014) Also, I been working as Master Trainer and Curriculum Developer, were I provide professional training for trainer and curriculum development by using best practices to enhance the technical training processes such as students centered learning methodologies and the teaching theories. In the other hand, developing curriculums to meet international standers, including writing learning outcomes to meet industrial needs and then drive the performance criteria, assessment methods/rubrics and teaching methodologies. Moreover, writing graduate profile for generic and specific discipline and moderate the entire process.
Committees JTI counsel committee (member) Mechanical counsel committee (Head) Examination review committee (member) Saudization recruiting academic candidates (member) Underwater Skills training committee (Head) Study of manufacturing pilot plant committee (member) (May/2009 to September/2009) FLUOR Greenville, South Carolina, USA Intern-Corporate Welding Engineer Welding Engineer- Construction Technology Primary responsibilities included performing all aspects of Welding Engineering assignments including development, implementation and management of a welding program, development of AWS/ASME welding procedure specifications, conduct welding procedure qualifications, qualify welders and welding operators, act as the project subject matter expert for welding related issues. Review of Welding Procedures Specification and Procedure qualification Records (WPS s and PQR s), Welder Qualification Test Record for Nuclear plant pharmaceuticals and pressure vessel, and to perform Quality Assurance Engineering tasks such as: research and review codes, primarily ASME, ASTM, AWS and API. (5/2009 to 9/2009) SABIC/KEMYA Jubail Industrial City, Kingdom of Saudi Arabia Intern-Draft-Man Primary responsibility is draft and update manual drawings into the software version using autocad, Micro-station and solid edge. And assist engineers in with new design and writing bill of materials. Education 5/2012-5/2014 Montana Tech of the University of Montana Butte, Montana, USA A Master of Science in General Engineering, Welding Engineering Option GPA (3.73 out of 4)
1/2007-5/2010 Ferris State University Big Rapids, Michigan, USA Bachelor of Science in Welding Engineer Technology GPA (3.39 out of 4) 5/2007-9/2007&5/2008-9/2008 Commercial Diving Academy Diploma in Commercial Diving Jacksonville, Florida, USA -Underwater Welding Specialist: -AWS D3699 -ACDE: Air/Mixed Gas Commercial Diver -ASNT: NDT Level I & II -NCCER: Rigging Specialist # 5882767 -HAZWOPER -American Heart Association First Aid CPR -Certified SCUBA Diving Instructor from NAUI # 49828 8/2004-5/2005 Hobart Institute of Welding Technology Troy, Ohio-USA - Diploma in the Fundamentals of Teaching the Art of welding - Preparation for AWS (CWI/CWE) Certified Welding Inspector/ Certified Educator Examination 5/2000-1/2003 Jubail Industrial College Jubail Industrial City, Associate Diploma in Manufacturing Engineering Kingdom of Saudi Arabia GPA (2.99 out of 4) 2011 American Welding Society Certify Welding Inspector CWI#11051741 10/2011 to 12/2011 Wintec,Waikato Institute of Technology Hamilton, Certify Adult Teacher-CAT New Zealand NZQA-NSN#140878250 2011 United Nations Industrial Development Organization-UNIDO Capacity Building Program for the Development of Business Counselors
Conference And Published Paper - First International Engineering Conference in Jubail, KSA (May-2011) Paper Topic: Role of vocational and Technical education for a knowledge economy. - Investigation in the use of plasma arc welding and alternative feedstock delivery method in additive manufacture - Thesis research May-2014 - Measurement and Simulation of Low Carbon Steel Alloy Deposit Temperature in plasma Arc Welding Additive Manufacturing. (Published on the International Journal for Innovation Education and Research (IJIER)) - Vol-2 No-6 June 2014 Edition - I beam analysis - Welding Handbook - Introduction to welding design - Introduction to welding automation - Welding 2 go To download all publications please visit www.abdullahalhuzaim.com