Series AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES Standard Air Chucks 374 Flow-Thru Air Chucks 375 Standard Pencil Tire Gauges 376 Dual Foot Tire Gauges 377 Dial Tire Gauges 378 Digital Tire Gauges 379 Tire Inflator Gauges 380 Tire Service Tools 386 w w w. T O P R I N G. c o m 372
AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES THE IMPORTANCE OF PROPER TIRE INFLATION S Tire pressure has a direct influence on tire life. When inflated to manufacturers recommendations, tires will provide optimal performance; on the other hand, incorrect inflation will cause abnormal and/or premature wear. While overinflation causes certain damage, this wear is even more pronounced for underinflation, not to speak of increased gas consumption. Maximum allowable pressure is usually indicated on the sidewall of the tire; as a rule, pressures for automobile tires should be around 35 PSI, compared to racing bicycles, for example, which use roughly 120 PSI. Under-inflation Pressure Tire Life -20% 75% -30% 50% -40% 35% INFLATION AND WEAR... Over-inflation Pressure Tire Life +20% 90% It is recommended that tire pressure be checked once per month and/or before any long trip, both for safety reasons and to reduce tire wear and gas consumption. offers 4 different types of tools for checking tire pressure: Pencil-type tire gauges Dial tire gauges Digital tire gauges Inflator gauges TECH TIP All air chucks, tire gauges and inflator gauges are compatible with Nitrogen used to inflate tires Dial inflator gauges make maintaining ideal tire pressure very easy. 373
S AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES STANDARD AIR CLOSED CHUCKS These chucks have a built-in shut off valve to stop airflow when chuck is not in use TECH TIP BALL FOOT AIR CHUCKS Description.130 1/4 (F) NPT.133 1/4 Hose Barb.135 1/4 (M) NPT.137 1/4 INDUSTRIAL.138 ARO 210.139 ULTRAFLO DUAL FOOT AIR CHUCK Closed Chuck Length: 6" Angled head can inflate either side Extended chuck for hard-to-reach tire valves, (ie: trucks, buses, and tractors) EXTENDED DUAL FOOT AIR CHUCK Length: 13" Extra long for hard-to-reach tire valves, ie: trucks, buses, and tractors Closed chucks are intended for use on live air lines. They are not intended for inflator gauges or tire installation machines, which control air flow with levers and valves and require flowthru chucks (see following page) Description.140 1/4 (F) NPT BALL FOOT AIR CHUCK AND CLIP Locks onto tire valve while inflating tire Description.110 1/4 (F) NPT TILT LOCK DUAL FOOT CHUCK Length: 6" Straight-on chuck with threaded, deep wheel lock nuts which lock onto valve mouth when tilted Description.150 1/4 (F) NPT AIR CHUCK CLIP Locks chuck onto valve while inflating tire Description.120 1/4 (F) NPT EXTENDED TILT LOCK DUAL FOOT CHUCK Description.160 1/4 (F) NPT Extra long (14") for hard-to-reach tire valves Straight-on chuck with threaded, deep wheel lock nuts which lock onto valve mouth when tilted LOCK-ON AIR CHUCK Securely locks onto valves when pushed forward. Allows serviceman to stand clear for tire inflation Releases when pulled back Description.100 1/4 (F) NPT.245 Dual Foot Lock-On Chuck RIGHT ANGLE DUAL FOOT AIR CHUCK Fits standard and large bore valves Description.170 1/4 (F) NPT Description.620 6" long.625 13" long 374
AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES FLOW-THRU AIR CHUCKS S Open Chuck Without shut off valve For inflation gauges and tire installation machines TECH TIP Open chucks are intended for use on valved air lines, such as those found on inflation gauges and tire machines. They are not intended for live air lines, as air will flow freely through them once pressurized (see preceding page for closed chucks) DUAL FOOT AIR CHUCK 6" long BALL FOOT AIR CHUCK AND CLIP Locks onto valve For hard-to-reach tire valves, ie: trucks, buses, and tractors Description.240 1/4 (F) NPT EXTENDED DUAL FOOT AIR CHUCK Description.210 1/4 (F) NPT 13" long For hard-to-reach tire valves, ie: trucks, buses, and tractors Description.250 1/4 (F) NPT HEX BALL FOOT AIR CHUCK Description.230 1/4 (F) NPT CLIP-ON AIR CHUCK Firmly locks onto valve Description.205 1/4 hose barb 375
S AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES STANDARD TIRE GAUGES PENCIL TYPE FEATURES All pencil type tire gauges have a precision-engineered Brass chuck to ensure gauge fits squarely on the valve. This prevents air leakage and guarantees accurate pressure readings Easy to read and use All gauges have a permanent deflating pin to release excess air All models have a tough, Chrome plated finish All models use a 4-sided indicator bar for easy pressure readings STANDARD TIRE GAUGE Dual calibration in PSI and kpa 2 sides calibrated from 5 to 50 PSI in 1 PSI increments 2 sides calibrated from 75 to 340 kpa Ideal for automobiles and light trucks TRACTOR AIR/LIQUID TIRE GAUGE Stainless Steel spring Calibrated from 5 to 50 PSI in 1 PSI increments Specially designed for air or liquid filled tires MINI TIRE GAUGE Compact size Calibrated from 10 to 50 PSI in 1 PSI increments Ideal for automobiles and light trucks.400.440.480 Chuck Permanent deflating pin to allow release of excess air STRAIGHT CHUCK TIRE GAUGE Calibrated from 10 to 50 PSI in 1 PSI increments Ideal for automobiles and light trucks.330 HIGH-PRESSURE TIRE GAUGE 2 sides calibrated from 20 to 120 PSI in 2 PSI increments 2 sides calibrated from 150 to 820 kpa High pressure bicycle and motorcycles tires.410 EXTRA-LOW PRESSURE TIRE GAUGE Specially designed for applications requiring accurate low pressure readings Calibrated from 1 to 20 PSI in 1/2 PSI increments All terrain vehicles, air lifts, garden tractors, air shocks, etc..460 LARGE BORE STRAIGHT-ON TIRE GAUGE Fits standard and large bore valves Calibrated 20-120 PSI in 2 PSI increments.615 376
AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES DUAL FOOT TIRE GAUGES FOR TRUCKS AND BUSES HIGH-PRESSURE DUAL FOOT TIRE GAUGE (PENCIL TYPE) 4-sided Nylon indicator bar Calibrated from 20 to 120 PSI in 2 PSI increments S FEATURES All dual foot truck tire gauges have precision-engineered Brass chuck guides to ensure gauge fits squarely on the valve This prevents air leakage and guarantees accurate pressure readings All models have a tough, Chrome plated finish DUAL FOOT SERVICE TIRE GAUGE (NYLON BAR) Constructed for high pressure applications, especially suited for heavy duty environments 2-sided Nylon indicator bar Calibrated from 10 to 150 PSI in 2 PSI increments, numbers at 10 PSI intervals with 5 PSI markers between 6" extension to reach inside and outside wheels Approx. 12" long.500.540 DUAL FOOT SERVICE TIRE GAUGE (ALUMINIUM BAR) 2-sided Aluminium indicator bar Calibrated from 10 to 160 PSI in 2 PSI increments, numbers at 10 PSI intervals with 5 PSI markers between 6" extension to reach inside and outside wheels Approx. 12" long.545 DUAL STRAIGHT CHUCK SERVICE TIRE GAUGE 2-sided Nylon indicator bar Straight-on chuck head with a 30 reverse angle chuck for inside and outside tandem wheels Calibrated from 10 to 150 PSI in 2 PSI increments Approx. 12" long.570 SWIVEL FOOT LARGE BORE TIRE GAUGE For large bore valves Swivel chuck adjusts to straight push-on or right angle, works on valves with shields Calibrated 10-150 PSI in 2 PSI increments Approx. 9" long.610 MASTER TEST PRESSURE TIRE GAUGE All tire gauges can eventually become inaccurate and contaminated. Checking gauges annually with the Master gauge assures gauge accuracy Designed and calibrated to the highest degree of accuracy Calibrated from 10 to 165 PSI in 2 PSI increments, with numbers at 10 PSI intervals with 5 PSI markers between Nylon indicator bar THIS INSTRUMENT IS NOT INTENDED FOR REGULAR CHECKING OF TIRES.580 377
S AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES DIAL TIRE GAUGES FEATURES Durable Steel case with polished Brass bezel and 2" dial Designed to stay accurate Excellent for all types of passenger vehicles Full geared, solid Brass precision movement with Bronze bourdon tube. Unlike piston-plunger-type gauges, bourdon tube is not affected by changes in temperature, humidity or altitude Pressure readings are held until the release button is depressed Bleeder button also releases excess air to exact desired pressure Include protective Rubber gauge guard STRAIGHT CHUCK SWIVEL ANGLE CHUCK Air Chuck.590 Straight (0-60 PSI) Air Chuck.582 Swivel angle (0-160 PSI) DUAL FOOT CHUCK Air Chuck.583 Dual Foot (5-160 PSI) STRAIGHT CHUCK (WITH FLEXIBLE HOSE) 11" hose for hard-to-reach tire valves Air Chuck.589 Straight (2-60 PSI) 378
AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES MAXPRO DIGITAL TIRE GAUGE S Reads from 2 to 100 PSI Displays in increments of 0.5 PSI Auto shut off Digital accuracy of ± 1% Streamlined ergonomic shape Lightweight and compact size.0 DIGITAL TIRE GAUGES Read from 2 to 150 PSI Display in increments of 0.5 PSI Calibration in PSI, bar, kpa, and kg/cm 2 Backlit LCD display for easy reading Digital accuracy of ± 0.5 PSI Auto shut off Replaceable battery Chuck.640 Ball Foot.642 Dual Foot 379
S AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES DIGITAL LEVER-TYPE INFLATOR GAUGE BENEFITS Provides accurate readings for proper tire inflation at a glance Fast inflation and deflation, saves time and money Easy to read, easy to use Long inflation hose and Clip-On chuck allow user to keep a safe distance from tire FEATURES High speed inflation and deflation rates Large, easy to read backlit LCD digital display Calibrated from 0 to 100 PSI in 0.1 PSI increments 3 in 1 function: inflates, releases air, and measures tire pressure Air pressure may be set without touching tire or valve core Large, separate backlight and reset buttons Gauge encased in a Rubber cushion for long lasting service 6' flexible hose with Clip-On chuck 250 PSI overpressure warning Low battery warning light SPECIFICATIONS Maximum Inlet Pressure 250 PSI Working Temperature Range 32 F to 176 F (0 C to 80 C) Air Inlet 1/4 (F) NPT Battery Type CR2450 Weight 3.3 lb (1.5 kg) Prod. No Description.660 Digital Tire Inflator Gauge 380
AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES COMPACT DIGITAL LEVER-TYPE INFLATOR GAUGE BENEFITS Provides accurate readings for proper tire inflation at a glance Fast inflation and deflation, saves time and money Easy to read, easy to use FEATURES Large, easy to read LCD digital display Calibrated from 5 to 150 PSI in 0.5 PSI increments 3 in 1 function: inflates, releases air, and measures tire pressure Air pressure may be set without touching tire or valve core Heavy duty cast handle encased in oil-resistant Rubber cover Gauge encased in an oil resistant Rubber cushion for long lasting service 48" flexible hose with Clip-On chuck S SPECIFICATIONS Maximum Inlet Pressure 250 PSI Working Temperature Range 32 F to 104 F (0 C to 40 C) Air Inlet 1/4 (F) NPT Batteries Type CR2032 Hose Prod. Length Air No in Chuck.662 48 Clip-On HEAVY DUTY LEVER TYPE DIAL INFLATOR GAUGE BENEFITS Rugged, heavy duty design for long service life Provides accurate readings for proper tire inflation at a glance Fast inflation and deflation, saves time and money Easy to read, easy to use FEATURES Large 3-1/2" dial is easy to read Calibrated from 0 to 160 PSI in 2 PSI increments 3 in 1 function: inflates, releases air, and measures tire pressure Air pressure may be set without touching tire or valve core Heavy duty cast body Gauge encased in Rubber cushion for long lasting service 48" flexible hose with Clip-On chuck Wire hanging hook SPECIFICATIONS Maximum Inlet Pressure 210 PSI Working Temperature Range 32 F to 104 F (0 C to 40 C) Air Inlet 1/4 (F) NPT Hose Prod. Length Air No in Chuck.650 48 Clip-On 381
S AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES STRAIGHT AIR CHUCK LEVER TYPE BAYONET INFLATOR GAUGE 3 in 1 function: inflates, releases air and measures tire pressure 3-sided Brass indicator Small straight chuck Calibrated 10-90 PSI in 2 PSI increments 12" flexible hose Air chuck.600 Straight LEVER TYPE BAYONET INFLATOR GAUGES 3 in 1 function: inflates, releases air and measures tire pressure 3-sided Brass indicator Calibrated 10-120 PSI in 2 PSI increments 12" flexible hose.601.602 Ball Foot Chuck Air Chuck.601 Dual Foot.602 Ball Foot LEVER TYPE DIAL INFLATOR GAUGES Excellent all-purpose inflation gauges Allows user to keep a safe distance while inflating or deflating tires 3 in 1 function: inflates, releases air, and measures tire pressure Air pressure may be set without touching tire or valve core Rugged Brass body Large, easy to read 2" dial gauge calibrated 0-160 PSI (0-11 bar) Gauge encased in a Rubber cushion for long lasting service Anti-vibration safety valve for pressure gauge.657 Dual Foot Chuck.655 Hose Prod. Length Air No in Chuck.655 48 Clip-On.656 12 Clip-On.657 12 Dual Foot.670 1/4 NPT Replacement Gauge.685 48" Replacement Hose.686 Replacement Connector 382
AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES PISTOL GRIP DIAL INFLATOR GAUGES Excellent all-purpose inflation gauge Air pressure may be set without touching tire or valve core 3-in-1 function: inflates, releases air and measures tire pressure Rugged Brass body Large, easy-to-read 2" dial gauge calibrated 0-220 PSI (0-15 bar) Gauge encased in a Rubber cushion for long lasting service 12" flexible hose.664 S Air Chuck.664 Dual Foot.665 Clip-On.665 With Clip-On.666 Replacement Gauge LEVER TYPE WINDOW INFLATOR GAUGE Heavy-duty gauge for passenger and truck tires 3-in-1 function: inflates, and measures tire pressure Easy-to-read accuracy magnifying lens window Thin-line indicator ring allows full view of scale calibrated 10-160 PSI in 2 PSI increments (0-11 bar) 15" flexible hose with dual foot chuck Magnifying Lens Window Air Chuck.658 Dual Foot LEVER TYPE DIAL INFLATOR GAUGE Excellent all-purpose inflation gauge 3-in-1 function: inflates, releases air and measures tire pressure Large, easy-to-read 2" dial gauge calibrated 10-220 PSI Gauge encased in a Rubber cushion for long lasting service 12" flexible hose with Brass ball foot air chuck Air Chuck.659 Ball Foot.666 Replacement Gauge.668 Replacement Hose 383
S AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES AIRPRO INFLATOR GAUGES Allow user to keep a safe distance while inflating or deflating tires Long extension allows user to work standing up (diminishing back injuries) Integrated valve allows slow release of tire pressure to desired level Rugged construction for everyday use TECH TIP Safety regulations require the operator to stay out of the way of inflating tires, which may explode. The 6' hose of these inflators allow the operator to stay out of harm's way AIRPRO DUAL FOOT INFLATOR GAUGE (WITH SAFETY LOCK-ON AIR CHUCK) Maximum working pressure: 120 PSI Excellent all-purpose inflation gauge Large, easy-to-read 2" dial gauge calibrated 0-145 PSI (0-10 bar) Gauge encased in a Rubber cushion for long lasting service Easy to hang up 72" flexible hose with safety lock-on air chuck APPLICATIONS Trucks Buses Tractors Air Chuck.652 Lock-On.671 Replacement Gauge.672 Rubber Protector AIRPRO PROFESSIONAL STRAIGHT CHUCK INFLATOR GAUGE Equiped with a valve ensuring that gauge will only be exposed to the pressure from tire. This protects the gauge from unnecessary pressure surges and shocks Excellent all-purpose inflation gauge Large, easy-to-read 2 1 2" dial gauge calibrated 0-145 PSI (0-10 bar) Gauge encased in a Rubber cushion for long lasting service Easy to hang up 72" flexible hose with Clip-On air chuck APPLICATIONS Cars and trucks Motorcycles and bicycles RVs Vans Racing vehicles Air Chuck.645 Clip-On.673 Replacement Gauge 384
AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES AIRPRO INFLATOR GAUGES Accurate inflation Will both inflate and deflate Dial gauge Perfect for everyday use Release valve allows bleeding to exact tire pressure desired TECH TIP Correct tire pressure means increased car safety and performance, better fuel economy and longer tire life S AIRPRO CLIP-ON CHUCK INFLATOR GAUGE Maximum working pressure: 120 PSI Excellent all purpose inflation gauge Large, easy to read 2" dial gauge calibrated 0-145 PSI (0-10 bar) Gauge encased in a Rubber cushion for long lasting service Easy to hang up 72" flexible hose with Clip-On air chuck APPLICATIONS Cars and trucks Motorcycles and bicycles RVs Vans Racing vehicles Air Chuck.651 Clip-On.671 Replacement Gauge.672 Rubber Protector.682 Replacement Hose AIRPRO DUAL FOOT INFLATOR GAUGE Maximum working pressure: 145 PSI Excellent all purpose inflation gauge Large, easy to read 2" dial gauge calibrated 0-145 PSI (0-10 bar) Gauge encased in a Rubber cushion for long lasting service Easy to hang up 18" flexible hose with dual foot air chuck APPLICATIONS Trucks Buses Tractors Air Chuck.653 Dual Foot.671 Replacement Gauge.672 Rubber Protector 385
S AIR CHUCKS, TIRE GAUGES AND INFLATOR GAUGES TIRE SERVICE TOOLS TIRE TREAD DEPTH GAUGE A handy tool that quickly and accurately tells how much tire tread is left on the tire Large tread platform with round probing pin Calibrated in 1/32" units and millimeters Convenient pocket clip.700 TIRE VALVE REPAIR TOOL Repairs inside and outside valve threads, inserts and removes cores from valves Corrosion-resistant finish Case hardened.900 VALVE CORE EXTRACTOR For inserting and removing tire valve cores Safety-grip handle with case-hardened and plated core 4-3/8" long.930 TIRE VALVE INSTALLATION TOOL Installs any length tubeless tire valve in any rim.955 386
BOXES OF SAVINGS discounts up to 20% Off! Buy products in bulk or pre-established quantities and take advantage of discounts of up to 20 % off your regular price. UP TO 20% OFF YOUR REGULAR PRICE Contact your Representative or Customer Service for more information on products available with quantity discounts 1 800 2 387